18 Best Rockville Rvd951 of 2022 – Romance University
After hours researching and comparing all models on the market, Romance University finds out Top 18 Best Rockville Rvd951 of 2022. Check our ranking below.
2,988 Reviews Scanned
- DEEP BASS PERFORMANCE: Delivers 400W peak power with an 8" subwoofer for rich, immersive low frequencies, ideal for enhancing car or truck audio systems with impactful sound.
- SPACE-SAVING DESIGN: Slim profile fits under most vehicle seats, maximizing trunk space while providing powerful bass for small cars, trucks, or SUVs.
- BUILT-IN AMPLIFIER: Integrated amp simplifies setup, eliminating the need for external amplifiers, with adjustable controls for bass, phase, and gain.
- EASY INSTALLATION: Includes mounting hardware and wiring kit for quick setup, compatible with most car audio systems, perfect for DIY audio enthusiasts.
- DURABLE CONSTRUCTION: High-quality materials ensure reliable performance in rugged vehicle environments, designed for long-lasting use in daily driving.
- Applications: Multi room home audio, Offices, Restaurant, Retail stores, Other commercial applications 4o
- FM Radio Tuner with Presets & Auto-Scan, Preset EQ for Bluetooth/USB (2 band EQ for other inputs), Remote control for source, master volume, MP3 module only (remote does not control zone volume), 19" rack mountable (removable rack brackets), Variable speed cooling fan, Frequency Response: 20Hz - 20kHz, Built-in Pre-Amplifier, A Weighted Signal to Noise (referenced to full 8 ohm power, worst channel) RCA Input: -90.7dBA, USB Input: -86.4dBA, Optical Input: -89.0dBA, Bluetooth Input: -86.4dBA, Rub
- Can power (32) 16-ohm speakers (4 run in parallel per channel), Built in Bluetooth with 35 foot range and external antenna, USB input to play audio stored on a thumb drive (32gb max), Optical input, Coaxial input, (2) sets of RCA inputs, RCA output for a powered sub or adding another amplifier, RCA record output, 8 sets of banana terminals that also accept bare wire, Record output to connect a recording device, Bass and treble and balance control knobs, Signal Indicator LED's
- Features of ROCK ZONE 8: Rockville Rock Zone 8 8 channel 8 Zone 1,000 Watt RMS Multi Room Receiver/Amplifier, 8 Independent channels / zones each with volume control, 8 Mono zones, or 4 Stereo Zones, RMS Power @ 4 Ohms: 125w x 8, Peak Power @ 4 Ohms: 500w x 8, RMS Power @ 8 Ohms: 90w x 8, Peak Power @ 8 Ohms: 360w x 4, Can power (8) speakers that are 4 or 8 ohm (1 speaker per channel), Can power (16) 8-ohm speakers (2 run in parallel per channel)
- What's in the Box: 8 Zone Amplifier, Remote, Detachable Rack mount ears, Power Cable, Owner’s manual, Warranty
- Rockville RPA9 3000 Watt peak 2 channel professional/DJ rack mount amplifier. 2U rack space
- Bridged and stereo output switch makes this perfect for (2) subwoofer, (2) speakers, or (4) speakers
- Built in Crossover switch allows make this perfect for speakers, monitors, or subwoofers
- Channel a & B clipping LED indicators. Channel a & B separate level controls
- Power, Signal, overload, clipping, and protection LED indicators on front of amp
- HIGH-POWER PERFORMANCE:- Delivers 400w RMS (200w x 2) at 4 ohms for clear, dynamic sound in small to medium venues, ideal for DJs and live sound setups.
- VERSATILE OPERATION MODES:- Stereo and bridgeable modes allow flexible configuration for various audio needs, from home systems to professional events.
- BUILT-IN CROSSOVER:- Adjustable crossover ensures precise sound control, optimizing performance for subwoofers or full-range speakers.
- DURABLE AND LIGHTWEIGHT:- Rack-mountable design with rugged construction offers portability and reliability for gigs or studio use.
- MULTIPLE CONNECTIVITY OPTIONS:- XLR, 1/4", and RCA inputs provide compatibility with mixers, microphones, and other pro audio equipment.
- HIGH-POWER AUDIO PERFORMANCE: Delivers 350 watts to power up to 6 zones, ideal for restaurants, offices, or retail spaces with clear, consistent sound distribution.
- BLUETOOTH AND USB CONNECTIVITY: Stream music wirelessly via Bluetooth or play MP3 files through USB, offering flexible audio input options for modern setups.
- 6-ZONE CONTROL FLEXIBILITY: Independently manage volume for 6 zones, perfect for customizing sound in different areas like dining rooms or conference spaces.
- DURABLE RACK-MOUNT DESIGN: Built with a sturdy, rack-mountable chassis for reliable performance in commercial environments, ensuring long-term use.
- MULTIPLE INPUT COMPATIBILITY: Supports 70V/100V systems, microphones, and RCA inputs, making it adaptable for various audio sources and installations.
- LOUD, CLEAR AUDIO WITH DEEP BASS: Enjoy powerful sound from a 6.5" full-range speaker and 1.5" tweeter, delivering 150W peak power (40W RMS) with rich bass and crisp highs, tuned for distortion-free music at any volume.
- VIBRANT LED LIGHT MODES: Set the mood with Ring, Signal Light Rhythm, or Colorful Light Rhythm LED modes that sync to your music, or turn lights off for a subtle look, ideal for parties or outdoor gatherings.
- LONG-LASTING BATTERY LIFE: Keep the music going with a 7.4V/4400mAh rechargeable battery, offering up to 12 hours at low volume or 4 hours at max, with convenient Type-C charging for on-the-go use.
- VERSATILE CONNECTIVITY OPTIONS: Stream via Bluetooth 5.1 (40ft range), play USB files (up to 128GB), use the 3.5mm aux input, or connect a mic for karaoke with adjustable echo and volume controls.
- PORTABLE AND DURABLE DESIGN: At 7.72 lbs, the polypropylene body with carry handle and metal grille ensures rugged portability, perfect for beach trips, picnics, or home parties, with TWS for stereo pairing.
- High Power Output: 1500W peak power and 370W Dyno-Certified RMS in a compact 2-channel Class A/B amplifier for robust, clear audio.
- Advanced MOSFET Power Supply: High-speed MOSFET power supply and studio-grade bipolar transistors deliver reliable, stable performance.
- Premium Audiophile Components: Built with ELNA brand capacitors and differential circuitry for pure sound quality without unwanted distortion.
- Customizable Sound Control: Fully adjustable 12dB bass EQ, low-pass, and high-pass filters allow precise sound tuning for ideal bass response.
- Smart Auto Turn-On & Protection: High-level input with auto-start function and IC-controlled protection circuitry ensure easy setup and long-term reliability.
- Rockville D12 5000w Peak/1400w RMS Class D 2 Channel Power Amplifier Pro/DJ Amp. LCD displays volume in dB per channel and operating temperature. 1.5U rack space. Built in limiter protects your speakers from distortion and clipping. Bridged mode allows you to combine both channels power into one channel for use with a subwoofer. Stereo mode is perfect for (2) speakers or (4) speakers in a left and right configuration.
- Parallel mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a left/right configuration. Built in crossover switch (bypass, 80 Hz, 160 Hz) allows amp to be used with full range PA speakers, or Subwoofer(s). Channel A & B Clipping Led Indicators. Channel A & B Separate Level Controls. Power, signal, clipping, and protection LED indicators on front of amp. Heavy duty rack mount ears with handles.
- Built-in variable high velocity quiet cooling fans. Maximum headroom for 4-ohm and 8-ohm Speakers. Level controls for precise setting and matching of sensitivity. Computer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over load. User serviceable fuse (12A, 250V). Frequency Response (bandwidth @ 2Vrms out, @ -3.0dB) 10 Hz – 30 Khz. THD + Noise @ 1Khz full power: <0.11%. Input Impedance: 10K Ohm Balanced. Input signal voltage: 638mV – 2.7V.
- Power Ratings: RMS Power Output:. Stereo 8 Ohm: 2 x 500W. Stereo 4 Ohm: 2 x 700W. Bridged 8 Ohm: 1 x 1400W. Peak Power Output:. Stereo 4 Ohm: 2 x 2500W Max. Bridged 8 Ohm: 1 x 5000W Max
- Terminals: Input Terminals:. Combo jack (XLR and ¼”) A & B inputs. Output Terminals:. Banana binding post speaker output. Speak on output. XLR output to connect another amplifier or powered sub
- Rockville RPA12 5000 Watt peak/ 1400W RMS 2 channel power amplifier Pro/DJ amp
- Lcd displays volume in DB per channel and operating temperature. 2U rack space. Built in limiter protects your speakers from distortion and clipping. Bridged Mode allows you to combine both channels power into one channel for use with a subwoofer. Stereo mode is perfect for (2) speakers or (4) speakers in a left and right configuration
- Parallel Mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a left/right configuration. Built in Crossover switch (bypass, 80 Hz, 160 Hz) allows amp to be used with full range PA speakers, or subwoofer(s). channel a & B clipping LED indicators. Channel a & B separate level controls. Power, Signal, clipping, and protection LED indicators on front of amp. Heavy duty rack mount ears with handles
- Built-in variable high velocity quiet cooling fans. Maximum headroom for 4-ohm and 8-Ohm speakers. Level controls for precise setting and matching of sensitivity. Computer controlled ice protection circuitry against speaker short circuit, Thermal over load, DC over load. User serviceable fuse (15A, 250V). frequency response (bandwidth @ 2VRMS out, @ -3.0dB) 10 Hz – 30 kHz. Thd + noise @ 1kHz full power: <0.03%
- Input impedance: 10K ohm balanced. Input signal voltage: 660mV – 1.5V. Input sensitivity: 0.7V. Damping factor: ( 100Hz, 10W, 4 ohms): 40.8. Damping factor: (1kHz @ 8 ohm): >400: 1. Effective Damping factor (100Hz, 10W, 4 ohms) 1.08. Output Impedance at speaker terminals: 0.09803 ohms. Frequency response vs THD+N (worst case, across normal bandwidth 1W) 0.11%. signal to noise ratio: > 100dB. Imd 60Hz & 1kHz, 4: 1: <0.04%
- Package Includes: (1) Rockville SS10P 10" 800w Slim Under-Seat Active Powered Car/Truck Subwoofer Sub, (1) Rockville RWK81 8 Gauge Complete Amp Installation Wire Kit with 100% Copper RCA
- Features of SS10P: Rockville SS10P 10" 800w Slim Under-Seat Active Powered Car/Truck Subwoofer Sub, Amplifier built in, Enclosure is made out of cast aluminum which stays cool even under the seat of your car or truck, Metal Bass Remote Included, Gain, bass boost, and crossover controls, Peak Power Handling: 800 Watts, RMS Power Handling: 200 Watts, Heavy Duty Mounting Feet, PWM MOSFET Power Supply,
- Low Level RCA Input, High Level Inputs with Auto Turn-On Technology, Adjustable Input Sensitivity, Soft Delayed Remote Turn-On, Thermal Protection Circuit, Short Protection Circuit, Overload Protection Circuit, Green Power/Red Protect LED, Phase Switch: 0° or 180°, Low Pass Filter: 50Hz - 180Hz, Bass Boost: 0 - 12dB @ 45Hz, Built in Subsonic Filter @ 20Hz, THD: < 0.4%, Fuse Rating: Single 20A
- Specifications of SS10P: Peak Power: 800 Watts, RMS Power: 200 Watts, Impedance: 4 Ohm, Frequency Response: 20Hz - 180Hz, Signal to Noise Ratio: >90dB, Sensitivity: 90dB @ 1w / 1m, Input sensitivity, Low level: 300mV, Input sensitivity, High level: 1.0V, Dimensions (Inches): 13.6" L x 9.65" W x 3" H
- Features of RWK81: Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit, (1) 17' High Grade Twisted Pair of 100% Copper RCA Cable, 17' 8 Gauge Translucent Blue Super Flex Power Cables, 17' 18 Gauge Blue Remote Cable, 17' 16 Gauge Clear Speaker Wire, 3' 8 Gauge Super Flex Ground Wire, Gold Plated AGU Heat Resistant Fuse Holder, 60 Amp AGU Gold Plated Fuse, 7' Split Tube Loom, Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
- Features of RPA16: Rockville RPA16 10, 000 Watt Peak 2 Channel Professional/DJ Rack Mount Amplifier, LCD displays volume in dB per channel and operating temperature, 2U rack space, Built in limiter protects your speakers from distortion and clipping, Bridged mode allows you to combine both channels power into one channel for use with a subwoofer, Stereo mode is perfect for (2) speakers or (4) speakers in a left and right configuration.
- Parallel mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a left/right configuration, Built in crossover switch (bypass, 80 Hz, 160 Hz) allows amp to be used with full range PA speakers, or Subwoofer(s), Channel A & B Clipping Led Indicators, Channel A & B Separate Level Controls, Power, signal, clipping, and protection LED indicators on front of amp, Heavy duty rack mount ears with handles.
- Built-in variable high velocity quiet cooling fans, Maximum headroom for 4-ohm and 8-ohm Speakers, Level controls for precise setting and matching of sensitivity, Computer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over load, User serviceable fuse (25A, 250V), Frequency Response (bandwidth @ 2Vrms out, @ -3. 0dB) 10 Hz – 30 Khz, THD + Noise @ 1Khz full power: <0. 04%, Input Impedance: 10K Ohm Balanced, Input signal voltage: 660mV – 1. 5V.
- Input sensitivity: 0. 7v, Damping factor: ( 100Hz, 10w, 4 ohms): 36. 5, Damping factor: (1Khz @ 8 ohm): >400: 1, Effective damping factor (100Hz, 10w, 4 Ohms) 1. 08, Output impedance at speaker terminals: 0. 10975 Ohms, Frequency Response vs THD+N (worst case, across normal bandwidth 1W) 0. 6%, Signal to Noise Ratio: > 100dB, IMD 60Hz & 1kHz, 4: 1: <0. 04%, SLEW RATE (input filter limited) : 40v/uS, Power Requirements: 120V / 50-60Hz, Weight: 40. 8 lbs, Dimensions: 19. 09 x 16. 93 x 3. 35 inch.
- Power Ratings of RPA16: RMS Power Output: Stereo 8 Ohm: 2 x 1000W, Stereo 4 Ohm: 2 x 1500W, Bridged 8 Ohm: 1 x 3000W. Peak Power Output: Stereo 4 Ohm: 2 x 5000W Max, Bridged 8 Ohm: 1 x 10000W Max.
- HIGH PERFORMANCE SOUND: Delivers 150 watts RMS per channel, providing clear, powerful sound for outdoor adventures. Perfect for adding audio to your off-road vehicles, motorcycles, and more.
- BLUETOOTH CONNECTIVITY: Easily connect your smartphone, tablet, or other Bluetooth-enabled devices to stream music wirelessly. No need for complex wiring, just connect and enjoy your favorite tunes.
- WEATHERPROOF DESIGN: IP65-rated protection ensures durability in harsh outdoor conditions, including water and dust resistance. This amp is built to withstand the elements, making it ideal for rugged use on motorcycles, ATVs, and UTVs.
- COMPACT AND VERSATILE: Its small size allows for easy installation in tight spaces, while the mounting hardware lets you securely attach the amplifier to your vehicle. Compatible with a wide range of audio systems and speakers.
- EASY TO INSTALL: The Rockville PS20 features simple wiring and installation, making it user-friendly for those who want to enhance their vehicle's audio experience without hassle.
- HIGH-POWER AUDIO PERFORMANCE: Delivers 1000 watts of peak power across 2 channels, providing clear, dynamic sound for DJ performances, karaoke nights, or professional audio setups with robust output.
- VERSATILE CONNECTIVITY OPTIONS: Features Bluetooth, USB, and SD card inputs for seamless music playback from smartphones, laptops, or flash drives, plus RCA and mic inputs for broad compatibility.
- PRECISE SOUND CUSTOMIZATION: Built-in 5-band EQ and independent mic controls allow tailored audio adjustments, ideal for optimizing vocals or music in live events or home studios.
- DURABLE AND PORTABLE DESIGN: Constructed with high-quality materials for lasting reliability, its compact size and lightweight build make it easy to transport for gigs or home use.
- MULTI-PURPOSE APPLICATIONS: Perfect for DJs, karaoke enthusiasts, or small venues, supporting live performances, parties, or presentations with professional-grade audio clarity.
- High Power Output: 4000W peak and 1000W Dyno-Certified RMS at 1 Ohm, delivering precise and powerful performance for premium car audio systems.
- Efficient Class-D Design: Advanced MOSFET power supply and upgraded double-sided SMT PCB for superior heat dissipation and up to 88.3% efficiency.
- Customizable Sound Control: Adjustable low-pass filter (32Hz–300Hz), subsonic filter (10Hz–50Hz), and 0-18dB bass equalizer for optimal sound tuning.
- Enhanced Durability: Radiation cooling, extruded aluminum heatsink, and IC-controlled protection circuitry ensure reliable operation at high volumes.
- Convenient Features: Includes metal bass remote, LED status indicators, and compact dimensions (14" x 8.5" x 2.24") for versatile and easy installation.
- HIGH-POWER BASS OUTPUT: Delivers 800W peak and 200W RMS for deep, rich bass, ideal for music genres like hip-hop, EDM, and rock in any car audio setup.
- SLIM LOW-PROFILE DESIGN: At just 2.7" tall, this 10" subwoofer fits under seats or in tight trunk spaces, perfect for sedans and compact vehicles.
- BUILT-IN AMPLIFIER: Integrated amp with adjustable input sensitivity and 50Hz–150Hz low-pass crossover ensures precise sound tuning for any system.
- EASY INSTALLATION: Comes with a complete wiring kit and remote bass control, allowing quick setup and convenient volume adjustments from the driver’s seat.
- WIDE COMPATIBILITY: Works seamlessly with most car stereos, delivering consistent, distortion-free bass for an immersive listening experience on the road.
- 1800 Watt 18“ Raw DJ 4 Ohm Subwoofer. Kevlar Reinforced Ultra Stiff Paper Composite Cone. Pulp Composite Dust Cap. Expanded and Rolled Steel Basket. Treated Accordion, “Asymmetrical W” Cloth Surround
- Ultra Saturated, High BL Magnetic Motor Gap. 3“ High Temperature 4-Layer CCAW High SPL Voice Coil. Linear Progressive Conex Dual Spider System. Nickel Plated Banana Plug Terminals. Impedance : 4 Ohms. 107 oz. Magnet Motor Structure . Frequency Response : 20 Hz to 500 Hz. Sensitivity : 105dB @ 1w/1m
- The speaker connection terminals are high quality nickel-plated screw style terminals and accept large gauge wire. The terminals are attached to large diameter, high current tinsel leads with silver solder to withstand high current and high temperatures during long excursions.
- The Rockville Bass Rider woofers’ voice coil use a specially formulated, polyimide-insulated, high temperature wire, designed especially for high SPL response. The winding is bonded onto an incredibly durable and heat resistant aluminum composite former.
- The voice coil assembly is bonded to the cone’s “double, linear-progressive Nomex spider”, using a thermoset epoxy adhesive. The spider and surround are bonded to the frame with a high strength cyanoacrylate adhesive, which is also used to bond the dust cap to the cone.
- Rockville RVW1500P8 1500 Watt 15" Raw DJ 8 Ohm Subwoofer.
- Peak Power: 1500 Watts. Power RMS: 750 Watts.
- Kevlar Reinforced Ultra Stiff Paper Composite Cone.
- Pulp Composite Dust Cap. Expanded and Rolled Steel Basket.
- Treated Accordion Cloth Surround.
- Features OF RPG15BT V2: Rockville RPG15BT V2 15" 1000 Watt Powered DJ/PA Speaker With Wireless Stereo Linking, Advanced Bluetooth 5.0 chipset plays your music without dropouts, TWS (true wireless stereo) allows you to link 2 speakers together wirelessly to play in stereo, Fast Bluetooth speed (low latency) for use in professional environments, 1000 Watts Peak/500 Watts Program/250 Watts RMS.
- High power long-throw 15'' woofer with 3" aluminum voice coil provides incredibly deep bass and acoustic power, Frequency Response: 35Hz-20KHz, Maximum SPL @1w/1m: 128dB peak / 125dB continuous, Bluetooth signal input. Now you can input any audio signal from your Bluetooth enabled music player or phone. No cables necessary!, USB/SD digital MP3 music player. Input audio signals, special effects, any preprogrammed audio file and amplify it through your system.
- Digital MP3 recorder. Now you can actually record back to your USB or SD memory card all audio that passes through your Power-Gig system. Do a show and record it live!, Wireless remote control. Enjoy the added convenience of being able to adjust any of the MP3 player functions, including volume, from the included wireless remote.
- Digital Effects signal processor for “Delay / Echo” effect. Now you can time align your digital echo effect and control the echo delay, repeat interval and level. No external signal processing unit necessary, the digital effect is built in with lots of control capabilities. LCD screen displays MP3 functions including BT connectivity., High-power 2-way pro sound reinforcement speaker system for live sound and playback applications.
- Compact and light weight system delivers distortion free sound even at extreme SPL., Linear Class AB amplifier technology: high power, transparent sonic performance., Internal switch-mode power supply for low distortion audio with superior transient response., 5-Band Graphic Equalizer allows you to custom tailor your sound to your venue by boosting and cutting specific frequencies to improve sound quality and clarity.
How Do You Buy The Best Rockville Rvd951?
Do you get stressed out thinking about shopping for a great Rockville Rvd951? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Rockville Rvd951, which is why we have assembled a comprehensive list of the greatest Rockville Rvd951 available in the current market. We’ve also come up with a list of questions that you probably have yourself.
Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Rockville Rvd951 that you consider buying. Your questions might include the following:
- Is it worth buying an Rockville Rvd951?
- What benefits are there with buying an Rockville Rvd951?
- What factors deserve consideration when shopping for an effective Rockville Rvd951?
- Why is it crucial to invest in any Rockville Rvd951, much less the best one?
- Which Rockville Rvd951 are good in the current market?
- Where can you find information like this about Rockville Rvd951?
We’re convinced that you likely have far more questions than just these regarding Rockville Rvd951, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Rockville Rvd951, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Rockville Rvd951. Make sure that you are only using trustworthy and credible websites and sources.
Romance University provides an Rockville Rvd951 buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Rockville Rvd951 currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Rockville Rvd951 has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Rockville Rvd951?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Rockville Rvd951.
- Customer Ratings: Number ratings grade Rockville Rvd951 objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Rockville Rvd951.
- Product Quality: You don’t always get what you pay for with an Rockville Rvd951, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Rockville Rvd951 is should be an indication of how long it will work out for you.
Romance University always remembers that maintaining Rockville Rvd951 information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Rockville Rvd951 is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.