18 Best Spartan Power Energy Meter of 2022 – Romance University
After hours researching and comparing all models on the market, Romance University finds out Top 18 Best Spartan Power Energy Meter of 2022. Check our ranking below.
2,493 Reviews Scanned
- 9/1/2020 NEW GEN4 MODEL! Spartan Power has listened and improved the LCD screen yet again! The crisp yellow backlight supplies you with data on the power consumption of connected electrical devices. With the push of a button, you can quickly and easily see the power measurements such as Voltage, Amperage, Power, Frequency, Power Factor and Overload.
- The SP-PM120 also displays the total consumption over a measured period of up to seven months and the corresponding operation time. Enter your electricity rate and then display the actual costs you are paying! Monitor energy usage and find the appliance or device that can kill your bill each month!
- SPARTAN HAS MORE POWER! Most electricity usage monitors can only withstand 10A or 12A, and burnout after prolonged use! The Spartan Power SP-PM120 is capable of 15A, 1800 Watts or 1.8 kilowatt giving you the peace of mind and capacity you need for your measurements!
- TWO YEAR WARRANTY! Batteries now included with the watt meter.
- NEED HELP? Have a question about a setting or another meter related inquiry? Contacting an EXPERT in the USA is only a phone call away!
- TWO YEAR WARRANTY vs ONE! In the Box: SP-8VM300A Meter, 300A Shunt, Wiring Kit, User Manual. USA tech support.
- Multifunctional battery meter displays: Battery Voltage, Discharge Current, Discharge Power, Discharge Impedance, Internal Resistance, Capacity, SOC, Energy, Running Time
- Great for use with a solar charge controllers, inverters, automobiles, RV, vans, truck campers, boats, etc
- 0-200 Volts DC, 300A Max
- Various Monitoring Parameters: The power meter plug can monitor the power (W), energy (kWh), volts, amps, hertz, power factor, cost, minimum and maximum power (W), cumulative days and time of your appliances. By switching 7 display modes, you can easily know the various parameters while the appliance is working. The home energy monitor can also calculate and display how much power your appliance uses and how much electricity bill it cost in cumulative time.
- Upgraded LCD display: With large screen size 2.36 inch x 1.85 inch, clearer monitor backlit, our electrical usage monitor can display the data clearer and more visible no matter day or night. 180°full wide viewing angles is great for reading and recording the data in any angles. No need to stand on the front of the display and bend over to read the numbers.
- Adjustable Backlight Time: Our upgraded watt meter has 5 options of backlight time. The default backlight time duration is 10 minutes(bL-0). If you want to change the backlight time, you can press and hold "UP" and "DOWN" button at the same time to enter backlight time setting, then press "UP" and "DOWN" to select the backlight time (bL-0 =10 minutes, bL-1=1 hour, bL-2=4 hours, bL-3=8 hours, bL-4=always on), finally press the "COST" to save the backlight time settings.
- Overload protection: When the power of the appliance exceeds the overload power, the LCD will display “OVERLOAD” to warn the user. All the buttons will quit working and can only be workable when you lower or remove the load power. The default overload power is 3680W and is adjustable from 0 to 3680W. In general, you need to set the overload power to 1800W before using. Just press the "function" button for more than 3 seconds to enter the setting.
- Data Memory Function: The wattage meter will record your power consumption data when you remove it from socket, or remove appliances from the electricity monitor. You can directly see the last data when you use it next time. This function can also automatically save the data when there is a sudden power failure.
- Various Monitoring Parameters: The power meter plug can monitor the power (W), energy (kWh), volts, amps, hertz, power factor, cost,minimum and maximum power (W), cumulative days and time of your appliances. By switching 8 display modes, you can easily know the various parameters while the appliance is working. The wattage meter can also calculate and display how much power your appliance uses and how much electricity bill it cost in cumulative time.
- Premium Material: The whole body of our power monitor is made of high-quality PC material. It makes our home power consumption monitor more long lasting, heat resistant and fall resistant. The standard US socket and plug is suitable for all US standard appliances.
- Overload Protection: When the power of the appliance exceeds the overload power, the word "OVERLOAD" and the LCD display will keep flashing, the buzzer will keep making a bi sound to warn the users. All the buttons will quit working and can only work again when the overload alarm has been cleared by raising the setting value or removing the appliance. The default overload power is 3680W and is adjustable from 0 to 3680W. In general, you need to set the overload power to 1800W before using. Just press the "MODE" button for more than 3 seconds to enter the setting.
- KWH Alarm: Our power monitor plug has a upgraded power consumption alarm function. You can set the alarm power consumption for the appliances you monitored. Once the accumulated power consumption reaches the set alarm power consumption, the word "kwh alarm" will be displayed and keep flashing, the LCD will also keep flashing, and the buzzer will keep making a bi sound all the time to warn the users.
- Data Memory Function: The watt meter plug in will record your power consumption data when you remove energy meter from socket, or remove appliances from the electricity monitor. All setting data and cumulative data(electricity quantity, cost, unit price, time) will be saved. You can directly see the last data when you use the electric usage meter plug next time(NOT including current, voltage, power, power factors). This function can also automatically save the data when there is a sudden power failure.
- Multi-function power monitor: Our electric usage monitor can monitor the power (W), electricity(kWh), voltage(V), frequency(Hz), current(A), power factor(PF), unit price($/kWh), total cost($) of your appliances. By switching 8 display modes, you can easily know the various parameters while the appliance is working. The “electricity” mode can calculate and display how much power your appliance uses. And the “total cost” mode will show how much electricity bill it cost in cumulative time.
- Overload protection: When the loading power of the appliance is over the default overload threshold 1800W, the whole display with backlight and the word “OVERLOAD” will keep flashing to warn the users. Please turn off the appliance for safety concern.
- Premium Material: The whole body of our energy meter is made of high-quality ABS material. It makes our home electricity usage monitor more long lasting, fireproof and anti-drop. The standard US socket and plug is suitable for all US standard appliances.
- Backlight Display: With white backlight and black words, the LCD display of our home power monitor can display the data clearer and help you to read the data easier no matter day or night. The backlight will only lights up when the device is connected to AC power. If no button is pressed, the backlight turns off automatically after 10 minutes. You can also press the "UP" button to turn off the backlight manually, and press any button to turn on backlight again.
- Easy to reset: No reset tool needed, our appliance power usage meter is easy to reset. You can press the “M” button for 5 seconds directly to reset the device. After reset, all cumulative data (electricity quantity, cost) will be cleared, and all settings will be restored to factory settings
- 1.Digital Multimeter:This power energy meter can measure and display voltage current active power energy frequency and power factor at the same time.with split current transformer,more convenient to install
- 2.Overload Alarm function:Backlight and power will flash simultaneously to give an alarm when exceeding the preset value.You can preset power limit by yourself
- 3.Automatic Data Storage Function:The last test data is stored automatically when the power supply abruptly lose. Don't worry about data loss due to sudden power outages
- 4.One-touch Control:The button can be used to control the backlight,reset energy, preset power alarm limit
- 5.LCD Display:Large-screen LCD with all sight 180° view,The blue backlight can be turned on/off manually. PZEM-022 requires an external power supply to light up the screen
- The electric energy meter can simultaneously monitor and display voltage, current, active energy, electric energy, frequency and power factor. The use of split current transformers makes installation more convenient.
- Large-screen LCD digital display with a full viewing angle of 180°. One-button control: backlight on/off, reset energy, preset power alarm limits.
- Overload alarm function, when the preset value is exceeded, the backlight and power supply will flash at the same time to give an alarm. You can preset power limits yourself.
- Automatic data storage function: when the power supply is suddenly cut off, the last test data will be automatically stored. Don't worry about data loss due to sudden power failure.
- Wide range of application scenarios, suitable for power monitoring and management in household, commercial and industrial fields.
- Bright blue backlit LCD display, easy reading. 12 gauge wire take higher volt and current. It is indispensable for analyzing, testing and troubleshooting any DIY DC power project. Very accurate in giving DC volt, ampere and wattage
- Operates from 4.8V to 60V or 0V to 60V with optional auxiliary battery. Measures 0-150A, resolution 0.01A; Measures 0-60V, resolution 0.01V; Measures 0-6554W, resolution 0.1W; Measures 0-65Ah, resolution 0.001Ah; Measures 0-6554Wh, resolution 0.01Wh
- Measuring Current (A), Voltage (V), Watts (W), Amp-hours (Ah), Watt-hours (Wh), Peak Amps (Ap), Minimum Volts (Vm), Peak Watts (Wp). Widely application battery tester, can test Solar Power batteries and chargers
- Multifunctional Tester: Evaluate RC battery charging efficiency.Measure power and energy consumption of any battery powered device. Predict model airplane flight time,Choose the best propeller/most efficient motor .Check for wiring and connector power loss.Ensure peak currents are safe for motor, ESC & Battery as well as wiring and connectors
- Notice: This watt meter was designed to be safe in systems unsing less than 60V and carrying current up to 150A. DO NOT EXCEED THE LIMITES
- The meter can only measure the active power(real power). It doesn't show Apparent power. If you measure power from a DC-AC inverter please make sure it's PURE SINE WAVE. Otherwise the meter can be burnt or melted.
- Voltage test range: One-Phase 80~260V AC Power, 50/60HZ; Current test range: 0~100A; Inner diameter of the CT: 15mm/0.6''.
- Overload alarm function (over power alarm threshold, backlight and power flickering prompt).
- The backlight can be turned on or off by pressing the button briefly, and the backlight status is automatically saved after power-off; Store energy data when power off(can be reset).
- Great display (display voltage, current, active power, energy at the same time), easy to install, 2 wires for the ct clamp and 2 wires for the line 1 and line 2 voltage reading, checked voltage and amperage against a Fieldpiece meter and read spot on, can easily make a rectangular in drywall 1 13/16 x 3 5/16 in to recess the display nicely.
- 【Overload Protection】Overload warning displayed on LCD, when the whole power exceeds the rated power 1650W of monitor, LCD will display "OVERLOAD" with booming noise to warn the user, and automatically disconnect the power.
- 【Upgraded Digital LCD Display】 The power consumption monitor with a large clear backlit LCD display, full wide view clear visible, make it easy to read and record the data, especially in the darkness.
- 【Electricity Usage Monitor】With the help of this Power Meter Monitor, You can make certain how much your standby appliances cost, what the power factor is, whether the appliances are really charged, and how long have your appliances been charged.
- 【Wide Usage】This electricity usage monitor measures various parameters: power (W), energy (kWh), volts, amps, hertz, power factor and maximum power (W), time, days - kWh is vital as this is what your electricity bills are based on!
- ✓ Backlit LCD Display: The watt meter features an upgraded backlit LCD display with a 160° wide viewing angle, providing clear and distinct data readings from any angle, day or night. (Note: To conserve energy, the backlight will automatically turn off after 15 seconds of continuous use.)
- ✓ 9 Types of Data Display: This energy meter plug accurately monitors a wide range of electrical parameters, including power (W), apparent power (VA), energy consumption (kWh), usage time (hours), power frequency (Hz), power factor (PF), voltage (V), current (A), and electricity cost. The user-friendly interface allows you to easily read and navigate through 9 types of data with a single button.
- ✓ Save Money and Energy: By toggling through the 9 display modes, you can gain insights into various operational parameters of your devices. The home energy monitor also calculates and displays the electricity consumption and cost over time, helping you save on your electricity bills by monitoring and managing energy usage.
- ✓ Data Storage: The plug-in electricity meter stores all non-real-time data, ensuring no information is lost in the event of a sudden power outage. If data exceeds the screen’s maximum display range, the screen will flash as a reminder. Pressing and holding the reset button for 3 seconds will reset the cumulative data to zero.
- ✓ Safe to Use: Rated voltage 125VAC, 60Hz, 15A maximum 1875W resistor and tungsten wire, 1/2HP. Clean and tidy interface, very simple to use.
- 【One-click switching interface】Choosing from 5 button to quick access different parameters. Press M to display KWH and electricity cost. Press + to display Watt (active power) and VA (apparent Power). Press OK to display true RMS voltage Vrms and true RMS current Arms. Press - to display Hz ( frequency) and PF (power factor). Press ↺ to display the maximum and minimum power. Press OK for 3s to display the complete accumulated time.
- 【Monitor home appliances】Insert the watt meter between the appliance and the power outlet. This energy meter will measure the power consumption of the appliance and automatically calculate the electricity bill, only being calculated if the appliance is running at a power greater than 2 watts. Suitable for computers, games consoles, printers, TVs, refrigerators, washing machines, dryers, routers, etc.
- 【Multiple protection】When the load power exceed the overload setting value, power consumption exceed KWH alarm setting value, electricity cost exceed cost alarm setting value, LCD displays "Overload", "KWh ALARM" or "COST ALARM" and LED light flashes continuously to warn user. The default overload power is 3680W ( 0~3680W adjustable ). In general, you need to set the overload power to 1800W before using. Ideal for monitoring the energy consumption of household appliances.
- 【Data storage】The power consumption monitor plug has a built-in high-precision chip that stores data in the event of a power failure. It has a reset function and a function to delete measurement data but retain setting parameters for switching between multiple appliances. It can effectively monitor the electricity consumption, reduce electricity bills and save energy.
- 【Upgraded LCD display】Wide viewing angles is great for reading and recording the data in any angles. No need to stand on the front of the display and bend over to read the numbers, especially if the energy meter is not at eye level, or is only viewable from an angle.
- NEW DESIGN: Our new electricity usage monitor with 2 outlets design can allow you monitor the power consumption of two electronic devices at the same time. Monitor each machine independently, without affecting each other
- POWER OFF MEMORY FUNCTION: With standard memory function, the CT and EC-KWH of electrical power consumption can be retained in the event of a power failure. And you can clear them manually
- SAFETY & OVERLOAD TIP: Full ABS flame retardant material housing, and equipped with 14AWG heavy duty extension cord, performances excellent heat resistance. When the rated power exceeds 1200W, a warning will remind you to cut off the power in time
- ACCURATE MONITORING: Electricity analyzer monitoring device equippeds with a high-precision current sensor and high-resolution real-time monitoring. You can measure power(W), volts, amps, hertz, kilowatt-hours(EC), cumulative time(CT) and power factor accurately
- WIDE APPLICATION & EASY TO USE: Watt voltage amps meter tester can connected to TV, refrigerator, water purifier, HIFI System and other household appliances. It can be monitored easily when the device is connected
- Simple to Read: each watt meter power analyzer is designed with a bright blue backlit LCD display for your reading convenience, allowing you to see the above data clearly in the dark, or even in the sun and other places
- Detect and Calculate Effectively: power monitor can detect the voltage maximum, which can not only effectively calculate the voltage, current, power, discharge and discharge time of the aircraft, calculate its force effect, can also be applied for the measurement of small current solar energy, electric vehicles and so on, important for the energy efficiency detection
- High Accuracy: the battery monitor operates in the range of 4.8V to 60V using optional auxiliary batteries; Measurement 0-200A, error 0.01A; Measuring 0-60V with 0.01V resolution; Measurement 0-6554W, resolution 0.01W; Measure 0-65Ah, 0.001Ah resolution; Note: it is suitable for systems below 60V and current below 200A, do not exceed the limit
- Versatile to Apply: our power analyzer with high precision is multi purpose to use, can meet your various work needs; For example, it does well to evaluate RC battery charging efficiency, battery powered device's power and energy consumption, and it can measure the operating voltage, so that the battery, motor, wiring, connector can work properly
- Low Resistance: our battery analyzer adopts quality tin copper core as material, fine in workmanship, low in resistance and stable in function, which can accompany you for a long time; In addition, it is equipped with an exhaust port, expels internal heat, helpful to prolong its service life
- Simple to Read: each watt meter power analyzer is designed with a bright blue backlit LCD display for your reading convenience, allowing you to see the above data clearly in the dark, or even in the sun and other places; The package contains 4 pieces of 45 amp power grade connectors
- Detect and Calculate Effectively: power monitor can detect the voltage peak, which can not only effectively calculate the voltage, current, power, discharge and discharge time of the aircraft, calculate its force effect, can also be applied for the measurement of small current solar energy, electric vehicles and so on, important for the energy efficiency detection
- High Accuracy: the battery monitor operates in the range of 4.8V to 60V using optional auxiliary batteries; Measurement 0-150A, error 0.01A; Measuring 0-60V with 0.01V resolution; Measurement 0-6554W, resolution 0.01W; Measure 0-65Ah, 0.001Ah resolution; Note: it is suitable for systems below 60V and current below 150A, do not exceed the limit
- Versatile to Apply: our power analyzer with high precision is multi purpose to use, can meet your various work needs; For example, it does well to evaluate RC battery charging efficiency, battery powered device's power and energy consumption, and it can measure the operating voltage, so that the battery, motor, wiring, connector can work properly
- Low Resistance: our battery analyzer adopts quality tin copper core as material, fine in workmanship, low in resistance and stable in function, which can accompany you for a long time; In addition, it is equipped with an exhaust port, expels internal heat, helpful to prolong its service life.Two sets of 45 amp power pole connectors are connected at both ends, and two spare 45 amp power pole connectors are also available.
- Meter Monitoring: Equipped with 2*80A sensors, this device accurately monitors appliances like air conditioners, furnaces, water heaters, washers, and dryers. It supports integration with other Tuya devices.𝐎𝐧𝐥𝐲 𝐒𝐢𝐧𝐠𝐥𝐞
- Energy Monitoring: Monitor real-time power consumption from anywhere to prevent costly repairs. Monitor real-time power Consumption, Voltag, current, Power factor, help you manage and control your home's real power anywhere conserve energy, and reduce expenses.
- User-Friendly Design: Lightweight and easy to install, the EPMC311 Power Clamp helps monitor electricity usage by attaching the clamp to the power cable. Use the 'SmartLife' app for setup.
- Real-Time Data: Requires 2.4 GHz WiFi with internet access for phone app monitoring. Provides an accuracy of ±2%.
- Safety First: Installation and servicing should only be done by qualified personnel. Avoid touching the device terminals during testing and ensure all power is switched off before installation to ensure safety.
- 6 Test Functions - The MICTUNING AC multimeter is mainly used to measure the voltage(80-260V), current(0-100A), power(0-22000W), energy(0-999kWh), frequency(45-65Hz), power factors(0-1PF)
- Excellent Visual Experience - The LCD HD display screen, combined with the backlight function, makes it easy to read the displayed data, giving you an excellent visual experience
- Safer Use - With the overload alarm function, when the actual value exceeds the preset value, the backlight will flash to make you know in time. You can set power limits as your need
- Firmer Installation - With the three-point snap design on both sides, high flexibility, make the installation firmer. The design of the screw wiring makes the wiring firmer
- Wide Application - Widely used in home appliances, inverter power supply, high and low distribution cabinet, photovoltaic system, etc
- Real-time Monitoring & Saving bills watt meter can help you to know more clear about the consumption of the appliance, help reduce the electricity cost. enter setting mode. Select the Cost/KWH mode, enter the utility providers cost of electricity so you can easily identify which appliance in your home is costing you the most money.
- Digital large LCD display screen make you easy to read and record cumulative kilowatt-hour, time and electricity expenses from full angles. Solving the problem of unclear screens in many other similar products.
- Blue and white backlights have no visual impairment when used at night, and screen data is clearly visible.
- Electricity usage monitor: Monitor is the killer of the high-cost energy appliance, helping you lower power consumption and save money. Digital LCD Display: Large clear LCD display for easy reading, the screen size is 47mmx60mm. Various Parameters: Power(W), Energy (kWh), Voltage, Amps, Power Factor, Cost and Minimum & Maximum Power, ideal for energy consumption monitor.
- Overload Protection: Once the whole power exceeds the rated power of monitor, LCD will display "OVERLOAD" with booming noise to remind the user Built-in Battery:With 3.6V rechargeable battery(NI-MH), It can store electricity. which allows meter to be moved and viewed without losing readings.
How Do You Buy The Best Spartan Power Energy Meter?
Do you get stressed out thinking about shopping for a great Spartan Power Energy Meter? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Spartan Power Energy Meter, which is why we have assembled a comprehensive list of the greatest Spartan Power Energy Meter available in the current market. We’ve also come up with a list of questions that you probably have yourself.
Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Spartan Power Energy Meter that you consider buying. Your questions might include the following:
- Is it worth buying an Spartan Power Energy Meter?
- What benefits are there with buying an Spartan Power Energy Meter?
- What factors deserve consideration when shopping for an effective Spartan Power Energy Meter?
- Why is it crucial to invest in any Spartan Power Energy Meter, much less the best one?
- Which Spartan Power Energy Meter are good in the current market?
- Where can you find information like this about Spartan Power Energy Meter?
We’re convinced that you likely have far more questions than just these regarding Spartan Power Energy Meter, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Spartan Power Energy Meter, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Spartan Power Energy Meter. Make sure that you are only using trustworthy and credible websites and sources.
Romance University provides an Spartan Power Energy Meter buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Spartan Power Energy Meter currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Spartan Power Energy Meter has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Spartan Power Energy Meter?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Spartan Power Energy Meter.
- Customer Ratings: Number ratings grade Spartan Power Energy Meter objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Spartan Power Energy Meter.
- Product Quality: You don’t always get what you pay for with an Spartan Power Energy Meter, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Spartan Power Energy Meter is should be an indication of how long it will work out for you.
Romance University always remembers that maintaining Spartan Power Energy Meter information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Spartan Power Energy Meter is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.