18 Best Spotter Arms of 2022 – Romance University

After hours researching and comparing all models on the market, Romance University finds out Top 18 Best Spotter Arms of 2022. Check our ranking below.

2,359 Reviews Scanned

Rank No. #1

CAP Barbell Safety Catches / Spotter Arms for FM-905Q Color Series, Red

SPECS – Sold as a pair. Please note, these spotter arms are ONLY FOR USE WITH CAP Barbell’s FM-905Q series and FM-CS7000F. Dimensions for each spotter arm are 17.75” L x 2” W x 8” H. Includes 30-day limited manufacturer warranty
BUILT TOUGH – Made with 10 & 11-gauge steel & welded to a 3-sided face plate, these safety catches offer the security & grip needed when using the CAP Barbell FM-905Q Series & FM-CS7000F rack. Peg diameter is 3/8” or 9. 5mm. Fits on 2x2-inch tubular frame
HEAVY-DUTY – With a maximum static weight capacity of 500 pounds and 10 & 11-gauge steel construction, these catches safely support heavy loads. Durable powder coat finish helps prevent rust and corrosion. Catches sold separately & not included with rack.
ADJUSTABLE – Easily adjust safety catches to preferred height for squats or bench presses. Simply twist & pull spotter arm & insert into desired height. Reinforced with rubber padding to reduce weight room noise & protect the finish of your bar.
DEPENDABLE – 16-inch length of these spotter arms provides support needed when going heavy on your CAP FM-CS7000F or FM-905Q Color Series Power Rack Exercise Stand. Welded end caps prevent bar from rolling or slipping off the safety arms.

Rank No. #2

Mikolo Safety Catches, Spotter Arms-Fit 2"x 2" Tube, with 1" Hole for Squat Rack Power Rack Cage, 800LBS Capacity (1 Pair)

[Special Customized]Individually designed for Mikolo folding squat racks and perfectly matched.It also fits 2"X2" square tube power rack with 1" hole(Please check your steel dimension before purchasing).
[Heavy & Durable] Made of 11-gauge steel, the surface is painted with a special powder coating, which is hard to scratch and stain resistant, and the black matte texture is beautiful and atmospheric.
[Easy to Adjustable Height] It only takes five seconds, select the appropriate height, insert the pin and tighten it, and you can start exercising.
[High Capacity] Made of 11 gauge steel - can hold up to 800 lbs, just attach the pins to your rack and you can safely perform a variety of weight training such as bench press, deadlift, deep Squats, shoulder presses, and soon.
[UHMW Plastic Pad] There is a UHMW plastic pad on the extension of the Barbell holder. The surface is smooth, which greatly reduces the noise and pad protects the barbell from damage when the barbell falls.

Rank No. #3

Kipika Safety Spotter Arms for 3" x 3" Power Racks with 5/8" & 1" Holes - Heavy Duty Barbell Safety Catches with Rubber Pad - Adjustable and Easy to Install - Set of 2

【Compatible with Most 3" x 3" Power Racks】These safety spotter arms are designed to fit most squat racks or power cages with 5/8" & 1" holes, allowing you to customize your home gym setup and train with confidence. They are also ideal for garage gyms, or commercial gyms.
【Adjustable Height and Easy Lock Design】You can easily adjust the safety catch to the desired height for different exercises, such as deep squats or bench presses. The easy lock design lets you slide the pin into the hole of the power rack and swing down to lock in place securely and quickly.
【Heavy Duty Steel Construction and Powder Coat Finish】These safety spotter arms are made of high quality steel with a durable powder coat finish to help prevent rust and corrosion. Each arm can hold up to 500 lbs, making them suitable for heavy lifting and high intensity workouts.Such as squat, bench press, deadlift, shoulder press, and more.
【Reinforced Rubber Pad and Welded End Caps】The barbell holder extension has a 17.5" long reinforced rubber pad that reduces noise and protects the barbell from damage when it is dropped. The welded end caps prevent the barbell from rolling off the end and ensure stability and safety.
【Usage Tips】The spotter arms can be easily adjusted to different heights. This feature is useful for various exercises like bench presses and squats. Always ensure the arms are securely locked in place before use.Always unload the barbell before adjusting the spotter arms to avoid injury and equipment damage. Ensure both arms are at the same height for balanced support.

Rank No. #4

Yes4All Premium Barbell Safety Catches/Spotter Arms 2x2 - Adjustable Height Heavy-Duty Safety Spotter Arms with 1000lb Weight Capacity, Convertibility to Fly Machine & UHMW for Barbell Protection

Fit 2-inch x 2-inch power racks: Yes4All spotter arms are compatible with 2-inch x 2-inch power racks with 1-inch or 5/8-inch holes (BUT NOT ALL – PLEASE CHECK YOUR RACK DIMENSIONS BEFORE PURCHASING TO AVOID ANY UNWANTED RETURN)
Heavy-duty: Built strong enough to withstand up to 1000 pounds, these safety spotter arms can safely hold heavy loads.
Premium quality: Yes4All safety catches are made of heavy-duty square steel. This tough design will prevent the spotter arms from corrosion and breaking apart and concurrently offer the needed security and grip when you work out with the power rack.
Full adjustability: Easily adjust these spotter arms 2x2 to the desired height for your effective exercise training. Just twist, pull, and insert them into your preferred height.
Protective UHMW plastic pad: These safety spotter arms are reinforced with the UHMW plastic pad to reduce noise and keep your barbell free from damage.

Rank No. #5

Fitvids Multi-Function Adjustable Power Cage with J-Hooks, Safety Straps and Optional LAT Pulldown Attachment and Cable Crossover, Spotter Arms Only, Pair

Spotter Arms, Pair
Designed to fit 2" x 2" square tube power racks/Power Cage with 1" hole
STRONG AND STURDY CONSTRUCTION: Heavy duty design up to 500 Pounds weight capacity
EASY TO USE: Easy to insert and lock-in design, just slide pin into power rack's hole and swing down to lock in place
Great for organizing your plates

Rank No. #6

Kipika J-Hooks and Safety Spotter Arms for 3" x 3" Power Racks with 5/8" or 1" Hole - Heavy Duty Barbell Holders and Catches with Rubber Pads - Power Rack Attachments for Squat, Bench Press and More

【Compatible and Durable】Upgrade your power rack and enhance your strength training experience with the Kipika J-Hooks and Safety Spotter Arms. They both fits 3" x 3" power racks with 5/8" or 1" holes, allowing you to customize your home gym setup and train with confidence. They are made of high-quality steel with a durable powder-coated finish that resists rust and corrosion.
【J-Hooks】The J-Hooks are designed to support your barbell during various exercises, such as bench presses, high lifts, barbell shrugs, and more. They come with 8mm thick rubber pads that reduce noise and vibration, and protect your barbell and power rack from scratches and damage. They are strong and stable enough and each J-Hooks can hold up to 1500 lbs of weight and maintain balance.
【Safety Spotter Arms】The Safety Spotter Arms are designed to catch your barbell in case of a failed lift, preventing injury and damage. They come with 17.5-inch long reinforced rubber pads that cushion the impact and protect your barbell from dropping. They also have welded end caps that prevent the barbell from rolling off the end, ensuring stability and safety. Each Spotter Arms can hold up to 500 lbs. of weight for heavy weight lifting.
【Easy Install and Adjust】Enjoy easy installation and adjustment with the simple locking design of the J-hooks and the spotter arms. Just insert the pins into the holes of the rack and swing them down to lock into place. No tools required. You can adjust the height of the J-hooks or spotter arms to suit your needs.
【Enhanced Workout Experience】The Kipika J-Hooks and Safety Spotter Arms are the perfect squat rack accessories for strength training enthusiasts who want to improve their performance and safety. Let you enjoy a smooth and safe weightlifting workout.

Rank No. #7

Titan Fitness T-3 Series Spotter Arms, 800 LB Black Safety Catches, Fits 2-in x 3-in 11-GA Steel Tubes

Compatible with T-3 Series Power Racks
Fully lined with UHMW to protect your barbell from damage
Included: (2) quick pins for easy adjusting
Laser-cut TITAN logo
No hardware required

SaleRank No. #8

Lifeswell Heavy Duty Safety Spotter Arms for 3" x 3" Power Rack with 5/8" or 1" Holes, Adjustable Barbell Catch with Rubber Pad, 500lbs Capacity, Fits Squat Rack & Power Cage

【COMPATIBLE】Our safety spotter arms are compatible with most 3" x 3" power racks with 5/8" or 1" holes, making them ideal for home gyms and garage gyms. (Please double check your rack size before purchasing)
【NOISE REDUCTION AND PROTECTION】Each squat rack spotter arm features a thick rubber pads to reduce noise during workouts and protect your barbell from damage. Welded end caps prevent barbell roll-off, ensuring stability and safety during your exercises
【EASY ADJUSTABILITY】Simply slide the pin into the hole of the power cage and swing down to lock in place. Easily adjust the safety catch to your preferred height for a variety of exercises like squats and bench presses
【HEAVY DUTY】The safety arms are made of high quality steel with a durable powder coating. The base features a fully welded triangular reinforcement that can withstand up to 500 lbs
【100% SATISFACTION GURANTEE】If you have any questions about the product, please feel free to contact us, we will be happy to serve you. US Patent Pending. All Rights Reserved

Rank No. #9

HulkFit High Density Shock Absorbing Nylon Safety Spotter Arm Straps with Reinforced Wear Pad for Pro Series 2.35” x 2.35” Power Rack Cage Accessories Attachment

Purpose - Improve the safety of your home gym and workout equipment with Safety Straps. Our Safety Straps are flexible with the ability to decelerate and distribute the weight load much more efficiently. They can also take repeated impacts over a period of time.
Usage - Insert the peg into the mounting hole and flip downward to lock in place. The reinforced padding on the drop area will minimize your risk of injury and will save the knurling on your barbells. Sport specific training for Bodybuilding, , Olympic Weightlifting, Martial Arts, and more.
Materials - Heavy-duty steel with high-density nylon.
What’s Inside - (1) pair of Safety Straps.
Product Specifications - Overall Dimensions 32.25” x 3” x 5.4”. Strap Dimensions 24.75” x 2.25” x .25”. Total Weight Capacity 300 lbs.

SaleRank No. #10

Yes4All Premium Barbell Safety Squat Bar Attachment - 1,000 LBS Capacity Squat Rack Spotter Arms 2x2 – Adjustable Height

Fit 2-inch x 2-inch power racks: Yes4All spotter arms are compatible with 2-inch x 2-inch power racks with 1-inch or 5/8-inch holes (BUT NOT ALL – PLEASE CHECK YOUR RACK DIMENSIONS BEFORE PURCHASING TO AVOID ANY UNWANTED RETURN)
Heavy-duty: Built strong enough to withstand up to 1000 pounds, these safety spotter arms can safely hold heavy loads.
Premium quality: Yes4All safety catches are made of heavy-duty square steel. This tough design will prevent the spotter arms from corrosion and breaking apart and concurrently offer the needed security and grip when you work out with the power rack.
Full adjustability: Easily adjust these spotter arms 2x2 to the desired height for your effective exercise training. Just twist, pull, and insert them into your preferred height.
Protective UHMW plastic pad: These safety spotter arms are reinforced with the UHMW plastic pad to reduce noise and keep your barbell free from damage.

Rank No. #11

Titan Fitness Spotter Arms for T-2 Series Power Rack

Compatible with T-2 Series Power Racks
Fully lined with UHMW to protect your barbell from damage
Included: (2) quick pins for easy adjusting
No hardware required
NOTE: If you purchased a T-2 Series Power Rack prior to October 2020, these spotter arms are not compatible with your rack.

Rank No. #12

Titan Fitness Independent Bench Press Spotter Stands, Adjustable Uprights, Rated 700 LB, Strength Training Accessory

A great tool for Bench Press, Shrugs, Bicep Curls, Deadlifts, etc.
The adjustable height steps up in 2-inch increments to fit all athletes
Built with a 17-inch wide top catch to protect you from falling weight or failed lifts
Quick pin makes adjusting simple and easy for no downtime between exercises
Not intended to be used as a squat stand

Rank No. #13

Folding Power Rack, Wall Mounted Squat Rack with Pull Up Bar, 980 Pounds Capacity, with J-Cups, Spotter Arms, Dip Bars, Landmine for Full Body Workout

Easy Folding Rack - Suitable for limited training space, no matter building you home gym at basemen or garage, this size of wall-mounted power rack: 46.3'' x 23.2'' (2'') x 84.6'' is a great choice for you
High Adaptable Function - 46.3'' width make this wall-mounted squat rack can perfectly fit most 6FT and 7FT barbell bars; Included 6 hooks can help storage common attechments like jumping rope, resistance bands, lifting wrist or gloves and so on, to better keep everything tidy
980 LBS Capacity - Space saving but stable power rack, using commercial thickness steel to bringing safety full body workout; Eighteen 1'' height adjustable holes, conveniently adjust the position of the J-hook or spotter arms to switch between upper and lower body workout at any time
Safety During Training - 19'' length of spotter arms can be a great protecter while doing squat or bench press, 1.2 x 1.2 solid steel make it can catch the barbell when you use up all your strength
Extra Attach - For better full body exercises; Use attach landmines to do T-Bar rows, T-Bar squats, T-Bar deadlifts, etc. Use dip-bar to do arm flexion and extension at high height position, do press-up at low position

Rank No. #14

Fat Gripz Pro - The Simple Proven Way to Get Big Biceps & Forearms Fast - At Home Or In The Gym (Winner of 3 Men’s Health Magazine Awards) (2.25 Inch Outer Diameter)

BUILD ARM SIZE AND STRENGTH - Fat Gripz will help you build bigger, stronger arms. They work by wrapping around barbells, dumbbells, pull up bars, resistance bands and exercise machine handles and increasing their diameter
TIME-TESTED METHODS, NEW SCIENCE - Science has now confirmed what athletes and bodybuilders have known for decades - that using a thicker diameter bar causes much greater muscle activation in the arms which leads to incredible size and strength gains
TRAIN LIKE THE BEST - Fat Gripz have won FIVE major awards and have been used for years by many: special forces soldiers, champion bodybuilders, MMA fighters, pro football / basketball / baseball players and elite athletes around the world
MILITARY-SPEC MATERIAL - The result of years of refinement of design and materials, Fat Gripz are as tough as your most intense workout so you will never need to replace them. The angled ends mean that they will even fit the angled EZ bars
GREAT VALUE - Grab your pair today - they cost less than a bottle of protein powder and will help you build muscle and strength for a lifetime

Rank No. #15

Synergee Safety Arms with 750lb Capacity for Power & Squat Racks. Compatible with 2x2 Tube Racks. Spotter Arms for Power Lifting. Sold in Pairs.

★ COMPATIBLE WITH 2X2 RACKS ★ – Got a Power Rack? Awesome! Have a Squat Rack instead? That’s totally cool, too! Our Safety Arms will attach to your rack as long as it has 2x2 Tubes and 1-inch openings. While we highly recommend you pair these attachments with our state-of-the-art Synergee Squat Rack or Power Rack, you can also use them with other brands with the same specifications!
★ LIFT HEAVY, LIFT SAFELY★ – With Safety Arms you can feel confident adding more weight to your barbell, even when you don't have a spotter! This is great for benching and squatting. With the proper bailing technique, you'll be supported when you test your limits and be able to safely fail a rep. Failing reps is all part of getting stronger; and being able to do so safely is essential!
★ MATTE BLACK FINISH ★ – These steel attachments looks incredible with our red and black Squat and Power Racks; and their versatile design will look great with any 2x2 competitor rack you own, too! The black powder coat-finished attachments add a range of functionality to your space, AND they look AWESOME!
★ WHAT’S IN THE PACKAGE ★ – The Synergee Safety Arm Attachments will act as a stand-in spotter during your bench press and squat workouts. This comes with (2) arms that are compatible with 2x2 tube racks with 1" openings. Each arm provides a 15.5" x 3.7" x 1" shelf to catch your barbell. Each has a 1" mounting peg, with a 5" x 2" support that wraps around the tube for extra support when the Safety Arms are mounted on the upright tubes.
★ NO SWEAT ★ – Leave the sweating and swearing for your training! Buying from Synergee means quick and caring customer service! Customer Satisfaction is our Number 1 Goal!

Rank No. #16

Mikolo Squat Rack Magnetic Position Markers - Power Cage Attachment, for J-Hooks and Spotter Arms (1" Holes)

【Precision Training Aid】: Achieve precise and effective workouts with Squat Rack Barbell Magnetic Position Markers. These markers are designed to help you maintain the perfect barbell placement during your exercises, ensuring each repetition counts. Maximize your fitness gains while minimizing the risk of injury.
【Durable and Long-Lasting】: Crafted from waterproof PVC with a strong magnetic backing, these markers are built to last. The clear print on each marker can withstand heavy use, so you can focus on your workout without worrying about wear and tear.
【Strong Magnetic Force】: Experience the reliability of strong magnetic force that keeps these markers firmly in place on your rack, preventing any unwanted movement or dropping.
【Effortless Adjustments】: Say goodbye to the hassle of constantly adjusting your barbell's position. These markers are designed with 1“ holes, which is perfect for use with J-hooks and spotter arms, and their large inner holes easily accommodate most rack pins. The thinner edges provide ample space for multiple markers to fit seamlessly together.
【All Full Sets】: These markers offer clear and vibrant colors that catch your attention, guiding your barbell placement. Each set includes 12 magnets, consisting of six pairs for flat, incline, decline, squat, overhead press, and blank ones that can be customized needs with markers！

Rank No. #17

Titan Fitness X-3 Series Spotter Arms, 1,000 LB Black Safety Catches, Fits 3-in x 3-in 11-GA Steel Tubes

Compatible with X-3 Series Power Racks
Fully lined with UHMW to protect your barbell from damage
Lined with UHMW to protect your uprights from damage
Included: (2) quick pins for easy adjusting
No hardware required

Rank No. #18

PRx Performance Squat Rack Spotter Arm Pairs, Fits Profile ONE 2x3 with 5/8" Hole & PRO 3x3 with 1" Holes in Upright Squat Racks, USA Made, (Spotter Arm Storage)

How Do You Buy The Best Spotter Arms?

Do you get stressed out thinking about shopping for a great Spotter Arms? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Spotter Arms, which is why we have assembled a comprehensive list of the greatest Spotter Arms available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Spotter Arms that you consider buying. Your questions might include the following:

Is it worth buying an Spotter Arms?
What benefits are there with buying an Spotter Arms?
What factors deserve consideration when shopping for an effective Spotter Arms?
Why is it crucial to invest in any Spotter Arms, much less the best one?
Which Spotter Arms are good in the current market?
Where can you find information like this about Spotter Arms?

We’re convinced that you likely have far more questions than just these regarding Spotter Arms, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Spotter Arms, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Spotter Arms. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an Spotter Arms buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Spotter Arms currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Spotter Arms has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Spotter Arms?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Spotter Arms.
Customer Ratings: Number ratings grade Spotter Arms objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Spotter Arms.
Product Quality: You don’t always get what you pay for with an Spotter Arms, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Spotter Arms is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining Spotter Arms information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Spotter Arms is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

18 Best Spotter Arms of 2022 – Romance University

How Do You Buy The Best Spotter Arms?

Related Post: