18 Best Stearns Oil Change Pump of 2022 – Romance University

After hours researching and comparing all models on the market, Romance University finds out Top 18 Best Stearns Oil Change Pump of 2022. Check our ranking below.

2,510 Reviews Scanned

SaleRank No. #1

Airpower America FloTool 5060TSMI Topsider Extractor Multi-Purpose Vacuum Oil Change Pump for 4-Cycle Engine, ATV, Boat, Large Vehicle

Easy to use; powered by vacuum pressure - no electricity needed
Quickly extracts old oil through the dipstick tube into the 8 quart container
Wide 12 inch diameter stance provides a stable base - eliminating any potential spills
Portable - easy to operate in confined spaces
No mess from spills or inconvenient drain plugs - used oil and other liquids are stored safely for proper disposal

Rank No. #2

FOUR UNCLES Oil Changer Vacuum Fluid Extractor Pneumatic/Manual 6.5 Liter with Pump Tank Remover and Brake Bleeding Hose Convenient Oil Change & Fluid Change Tool No Leaks No Overfills

【2 WAY USAGE】Pneumatic and manual mode to fit any condition. The pneumatic mode provides higher speed while manual mode requires no other equipment to work with.
【SPEEDY EXTRACTION】Fast extraction speed of 1.8L /min. The oil change pump extracts engine oil in a 4 cylinder car within 5 minutes at pneumatic mode.
【NO OIL LEFT】 Vacuum Fluid Extractor comes with 5 kinds of tubes with different diameter go into the bottom of oil pan. The fluid extractor can be used to remove fluids from engine oil to brake fluids. It has a 6.5L reservoir, 3.28 feet flex hose and 3 extra dipstick hoses to reach the very bottom of the reservoir and suck up every drop of oil.
【Easy to Use】With FOUR UNCLES oil extractor, you don’t have to get under the car anymore to do fluid changing and there is no mess to clean afterward. Just simply open the hook and insert tube to change engine oil.
【WORK FREELY】Not limited to places, change oil anytime, anywhere. Perfect for working on a car in the garage, also suitable for using outdoors on boats, truck, or lawn mowers.

Rank No. #3

Jabsco 17850-1012 DIY Engine Oil Change System, 3.5 Gallon Capacity, 12 Volt , Black

Will extract up to 50 weight of oil at a temperature of 160°F (71°C) through the engine’s dip stick tube, usually in less than 5 minutes
8 feet (2.4m), oil & heat resistant 1/4 inch suction tube
6 feet (1.8m) battery leads with aligator clips
Four easy steps to fast, clean oil
Self-contained oil change system

Rank No. #4

EWK 6L Vacuum Oil Extractor Pump Fluid Extractor Oil Change Pump for Automotive and Marine

【 Work Freely 】 Portable 6 liters sturdy and lightweight extractor pump for changing fluid. Simple manual operation requires no other equipment to use with. Perfect for carrying around to complete various fluid extraction jobs.
【 Easy to Use 】 Create vacuum and powerful suction by pumping the handle, makes it quick to empty fluids in your equipment. The special extra-wide base designed allows you to step on it to stabilize the tank while pumping. Built-in capacity marker for easily tracking the progress.
【 Hominization Design 】The 59 inch transparent main tube makes checking oil quality easier, and the 42 inch suction probe is made of flexible metal for easily slide into the bottom of oil pan. Sealing cap to keep the tank well-sealed and safe. Pour spout makes it fluent to dump the waste fluid without spilling.
【 Wide Applications 】 EWK oil extractor is designed to drain old fluids from cars, motorcycles, lawnmowers, marine engines, watercrafts, stationary engines and industrial machinery. It's also works perfectly for low viscosity fluids such as trapped water or coolant. *Note: Gasoline, and fluid with high volatility, high corrosion, high alkalinity, high temperature are FORBIDDEN to be applied on the extractor.
【 Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast delivery. Contact us if you need further assistance.

Rank No. #5

EWK Patented 6.5L Pneumatic/Manual Oil Extractor Change Pump for Automotive Fluids Vacuum Evacuation

【 Humanized Design 】 With EWK oil extractor pump, the engine oil or transmission fluid can be easily and cleanly extracted directly through the dipstick tube, and the sealing cap is attached to prevent the liquid from spillage during transport.
【 Dual-Purpose 】Equipped with pneumatic and manual mode depend on the environment and your own equipment. The manual mode requires no other equipment to use, while the pneumatic mode turns the pump into a high-speed oil changer. (Suction speed: 1.8L/min.)
【 No Oil Left 】 The vacuum oil changer comes with 2 sizes of upgraded extra-long tubes with different diameter. Slide it as far as possible to reach the very bottom of your reservoir and suck up every drop of oil.
【 Wide Application 】Perfectly extracts most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid. Applicable for car, motorcycle, lawn mower, boat, jet ski and etc. *Note: Gasoline and fluids with high volatility, high corrosion, high alkalinity and high temperature are FORBIDDEN to be used on the extractor.
【 Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast delivery. Contact us if you need further assistance.

SaleRank No. #6

OEMTOOLS 24389 5.6 Quarts (1.4 Gallons) Manual Fluid Extractor, Fluid Extractor Pump, Oil Extractor Vacuum, Auto Oil Extractor

Carefree Car and Boat Care: Easily remove engine oil, transmission fluid, power steering fluid, gear oil, coolant, and more with this versatile fluid evacuator pump
Easy Oil Change: No more crawling under cars for oil changes; This topside oil extractor pump pulls oil from the dipstick tube, allowing you to stay right side up the whole time
Move Fluid with Less Mess: An automatic shutoff valve and single piece construction are the cleanliness dream team, helping you keep the fluid off your floor
Longer Reach: A 5 foot long flexible main suction hose connects to the improved 41 inch long dipstick hose adapter or to the 17 inch long suction hose adapter for plenty of reach
Pump for Joy: The manual extraction pump quickly evacuates up to 1.4 gallons (5.3L); Get fast, easy, and effective fluid extraction with no compressed air required

Rank No. #7

Jabsco 17800-2000 Marine Porta Quick Oil Changer, Flexible Impeller Pump, Reversing Switch 3.5 Gallon, 12-Volt, Non CE, White

Quick, clean and easy oil changes on board
Uses vessel's own power supply to operate heavy-duty flexible impeller pump
Reversing switch allows for pumping oil in either direction
Includes 4 feet of neoprene hose with 40 inch PTFE dipstick probe;Fuse Size: - 10(ampere)
1 year waranty

Rank No. #8

GPOAS 110V AC 550W Self Priming Electric Transfer Pump, 60L / Min 16GPM Oil Change Fuel Diesel Kerosene Biodiesel Pump

⛽ Professional performance with a maximum flow rate of 60 liter per minute (16 gallons per minute), voltage: 110V AC, maximum power: 550W,works efficiently
⛽ Self priming rotary pump with sensitive switch for precise control, electric power supply makes it very fast and convenient
⛽ The high-quality electric clip is made of all copper and is durable. The one-key lock of the waterproof power switch has a transparent waterproof cover, which is safer to use.
⛽ Designed for transferring diesel oil or kerosene for vehicle, oil warehouse, construction site, farm and outdoor work.
⛽ Professional Electric Oil Pump makes transferring fuels easy. Whether you need to fuel your vehicle, generator, farm equipment, or other fuel-powered equipment, this pump has you covered. It can handle diesel oil, kerosene, not for gasoline.

SaleRank No. #9

Mxmoonant 12V Oil Transfer Pump, 3.2GPM Self Priming Oil Change Extractor Pump, Fuel Transfer Pump with Hoses for Diesel Kerosene Marine Boat Truck

[STRONG SUCTION & LOW NOISE] This electric gear oil pump has a self-priming range of up to 3m/10ft, and the max flow is up to 3.2GPM/12LPM. When the machine is working normally, the sound is around 55-60db. In addition, it is also equipped with shock-proof rubber mounting feet, which can greatly reduce the working noise.
[HOSE INSTALL] This fuel transfer pump is small in size and easy to carry, making it convenient to install in various directions in a limited space. The port diameter is 3/8’’ (10mm), which can meet most of the hoses on the market. Of course, if you don’t have the right accessories for a while, we also include a one-meter black oil hose and two fixing clips, which can help you transport in time and bring you a better experience.
[TRANSFER & CHANGE] This oil change pump has a vacuum self-suction function, which is generally used in the liquid replacement and transfer of large trucks, engineering vehicles, harvesters and small refueling equipment, including diesel, engine oil, lubricating oil, kerosene and other high-viscosity oily liquids.【Tip】Except gasoline petroleum fuel.
[OVERHEAT PROTECTION] This oil transfer pump has a built-in overheating protector. And if there is an abnormality such as overheating and overload, it will automatically shut down to prevent the machine from damaging.【Tip】Designed for intermittent use only. Single use time is recommended in about an hour, and it can be operated continuously after the cooling stops for 20 minutes.
[HIGH QUALITY] This 12V, 3.2GPM oil pump is certified by CE EU, and the pump body is made of all-copper and equipped with high-quality copper winding rotors, which is durable and lasting. There is no doubt that this pump can live for a long time. If you have any questions about the product please feel free to contact us.

Rank No. #10

SWANLAKE 6.5 Liter Pneumatic/Manual Fluid Extractor Pump,Oil Changer Vacuum Fluid Extractor,Oil Change & Fluid Change Tool

Pneumatic mode and manual mode to fit all situation. The manual mode could be used by itself without any other equipments.The pneumatic mode turns the pump into a high-speed oil changer as long connect with air compressor.
6.5L vacuum fluid extractor comes with 5 different diameter tubes go to the bottom of oil pan. also 3.2 feet flex hose and 3 extra dipstick hoses to reach the bottom of the reservoir and suck up all fluid.
Fast suction speed of 1.8L/min. The oil change pump extracts engine oil from a 4-cylinder car in a couple of minutes in pneumatic mode.
Use this oil extractor pump, the engine oil and transmission fluid could be extracted directly by the dipstick tube, the sealing cap is attached to stop the liquid from spill during transportation.
Its a perfect tool for working on vehicles anytime and anywhere.no need to lift up or crawl under the car to drain out the oil.NOTE:fluids with high volatility, high corrosion, high alkalinity and high temperature CANT be used.

SaleRank No. #11

EWK 6.5L Manual Oil Extractor Change Pump for Automotive Fluids Vacuum Evacuation

【 Humanized Design 】 With EWK oil extractor pump, the engine oil or transmission fluid can be easily and cleanly extracted directly through the dipstick tube, and the sealing cap is attached to prevent the liquid from spillage during transport.
【 Easy Operation 】 The manual fluid evacuator requires no other equipment to use with. With a good number of strokes on the sturdy handle, the pump will create vacuum that triggers a powerful suction to help you change oil efficiently.
【 No Oil Left 】 The vacuum oil changer comes with 2 sizes of upgraded extra-long tubes with different diameter. Slide it as far as possible to reach the very bottom of your reservoir and suck up every drop of oil.
【 Wide Application 】Perfectly extracts most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid. Applicable for car, motorcycle, lawn mower, boat, jet ski and etc. *Note: Gasoline and fluids with high volatility, high corrosion, high alkalinity and high temperature are FORBIDDEN to be used on the extractor.
【 Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast delivery. Contact us if you need further assistance.

Rank No. #12

Amarine Made 12V 60W Oil Change Pump Extractor, Oil/Diesel Fluid Pump Extractor Scavenge Oil Change Pump Transfer Suction Transfer Pump with Tubes Truck Rv Boat ATV (60W)

【Specificaiton】: Input Voltage: DC 12V; Wattage: 60W; Current: 5A;Motor Oil (40-60 degrees) Flow Rate: approx. 0.8-1.0L / min
【Easy Installation】: you just need to place the inlet and outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button. This process is very simple and you can often do it by yourself to ensure your engine runs smoothly.
【 Ideal Equipment For 】: Extracting Motor Oil From Your Vehicle Without Mess & Specialised Tools Extract The Oil From Your Car, Motorcyle, Scooter, Quad Bike, Truck, Boat, Forklift, Generator, Tractor, Ride On Mower Etc Siphon & Transfer Diesel To Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc.
【WARNING】: This product is NOT suitable for gasoline/petrol. Do not use this pump to extract water, gearbox oil or easy flammable liquids (fuel, petrol etc)
【Package Included】: 1 x Pump; 1 x Outlet Hose; 1 x Inlet Hose; 2 x Hose Clamps; 2 x Battery Clamps

Rank No. #13

PLUMIA 12V 100W Oil Change Pump Extractor, Upgraded Oil/Diesel Fluid Pump Extractor Scavenge Suction Transfer Pump, Marine Electric Oil Pump, For Boat, Car, Motorcycle, ATV, RV, Truck, Motorbike

If the oil cannot be pumped after the oil change pump is started, please do not start it all the time to prevent overheating from damaging the oil change pump. Please use the product according to the instructions.【QUICK AND CLEAN OIL CHANGES】- Portable and small oil pumps are needed by everyone, simple operation does not need to spend too much time to practice, widely used in motorcycles, Car, scooters, Boat, quad bikes, trucks, Ship, forklifts, Marine, Power generation machinery, tractors, lawn mowers and various machinery to change the oil.
【SAFE OPERATION】- Except for engine oil and diesel, the oil pump must not draw any flammable liquid or water to avoid accidents. Before use, be sure to heat the car engine to 104 ° F-140 ° F, Avoid clogging the oil pump due to oil solidification.
【ENGINE OIL CHANGE MADE EASY】 - DC 12V 100W has enough power, you only need to clamp the conductive clip on the motor and open the switch to start it, so that you can complete the oil pumping work smoothly and effectively, replacing the traditional oil change method and reduce tedious workload (diesel flow: 1.7L / m, oil flow 0.35L / m).
【ACCESSORIES & PRECAUTIONS】- The oil pump has 2*outlet hose, 2*inlet hose, 4*hose locks,1*screwdriver, 1*Oil-proof gloves, 2*battery clips, 1*user's manual. Please pay attention to the direction of import and export, positive and negative poles and lock hose lock before use. The suction power of the micro suction pump is limited. Please do not connect other extension tubes.
【WARNING】: This product is NOT suitable for gasoline/petrol. Do not use this pump to extract water, gearbox oil or easy flammable liquids (fuel, petrol etc) If there is any problem with this oil pump, please contact customer service in time, and you will get a satisfactory result.

SaleRank No. #14

Vevitts Engine Oil Pump, Portable Electric Self-Priming Motor Oil Pump for Car Motorcycle and Boat Engine Oil Transfer Change Pump 12V 100W

【VEVITTS 100W OIL EXTRACTOR PUMP】Lightweight and Portable-compact size for easy storage anywhere and transport.
【BUY WITH COMFIDENCE】From the purchase of for RAW materials to the factory inspection of products, we will conduct inspections at each stage, buy with confidence.
【HIGH-QUALITY MATERIALS】 Vevitts oil extractor pump is made of high-quality aluminum alloy and plastic pipes, which is corrosion-resistant, durable, wear-resistant, corrosion-resistant, and durable.
【EXCELLENT PERFORMANCE】 The oil pump is used for oil extraction. This oil change equipment is perfect and the efficiency is high. The extraction can be completed by one person. It is equipped with 3 thick hoses, and the entire extraction process can be clearly seen. It is a practical and safe tool.
【EASY TO USE】 Oil fluid extractor is easy to install, easy to use, small in size, light and portable, easy to store and carry to any place you want. No special tools required, needn't warm engine oil up. Just fix the two clips on the battery power supply, connect 2 inlet hoses(6mm,8mm) by adapter, fix outlet hose(10mm) on the outlet by yellow clamp, and turn the power on.

SaleRank No. #15

SHURFLO 8050305426 Oil Change System

Voltage - 12 VDC
Flow Rate - 3.75 GPM
Liquid - 130 F Max
Leads - 8' w/ Alligator Clips

Rank No. #16

BLACKHORSE-RACING Self Priming 110V AC 16GPM 60L/min Oil Transfer Pump Fuel Diesel Kerosene Biodiesel Pumps

▲Speed Rang: 2800（r/m）
▲Flow Rate: 20-60L/Min (5.25-15.75 GPM)
▲Motor: 110V AC 550Watts 60hz Self Priming
▲This oil pump is used for pumping light oils such as diesel or kerosene for vehicles, construction sites, farms and outside applications or other for other fuel powered equipment.
▲This oil pump is convenient, reliable, easy to operate and simple to maintain. Not suitable for low flammability fuel (such as gasoline, liquefied petroleum gas, alcohol, etc.)

Rank No. #17

Oil Change KIT Pail W/Pump 12V

Self priming up to 3.28 feet
12 Volt power
Fuse size: 8 A
Versatile and dependable to fit your boat's needs
Fit type: Universal Fit

Rank No. #18

OEMTOOLS 24938 10 Quart (2.5 Gallons) Manual Fluid Extractor, Manual and Pneumatic Oil Extractor, Fluid Vacuum Extractor, Vacuum Evacuator

Carefree Car and Boat Care: Easily remove engine oil, transmission fluid, power steering fluid, gear oil, coolant, and more with this versatile fluid evacuator pump
Double Duty: For pneumatic extraction, insert the suction hose in the vacuum extractor pump receiving hole; Manually suction fluid with the engine oil pump's oversized handle
Don’t Cry Over Spilled Oil: The 9.5-gallon reservoir is a solid one-piece tank that can't leak out the bottom; The built-in shutoff prevents overfilling the extractor pump reservoir
Time Flies: Draining oil from beneath a vehicle takes eons; The fluid pump's 5ft hose and dipstick adapter extracts automotive fluid directly from the dipstick tube
Under Pressure: Change transmission fluid anytime with the pneumatic and manual pumping options; This fluid extractor pump works at 85 PSI and a max pressure of 120 PSI

How Do You Buy The Best Stearns Oil Change Pump?

Do you get stressed out thinking about shopping for a great Stearns Oil Change Pump? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Stearns Oil Change Pump, which is why we have assembled a comprehensive list of the greatest Stearns Oil Change Pump available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Stearns Oil Change Pump that you consider buying. Your questions might include the following:

Is it worth buying an Stearns Oil Change Pump?
What benefits are there with buying an Stearns Oil Change Pump?
What factors deserve consideration when shopping for an effective Stearns Oil Change Pump?
Why is it crucial to invest in any Stearns Oil Change Pump, much less the best one?
Which Stearns Oil Change Pump are good in the current market?
Where can you find information like this about Stearns Oil Change Pump?

We’re convinced that you likely have far more questions than just these regarding Stearns Oil Change Pump, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Stearns Oil Change Pump, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Stearns Oil Change Pump. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an Stearns Oil Change Pump buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Stearns Oil Change Pump currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Stearns Oil Change Pump has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Stearns Oil Change Pump?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Stearns Oil Change Pump.
Customer Ratings: Number ratings grade Stearns Oil Change Pump objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Stearns Oil Change Pump.
Product Quality: You don’t always get what you pay for with an Stearns Oil Change Pump, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Stearns Oil Change Pump is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining Stearns Oil Change Pump information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Stearns Oil Change Pump is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

18 Best Stearns Oil Change Pump of 2022 – Romance University

How Do You Buy The Best Stearns Oil Change Pump?

Related Post: