18 Best Usb Ir Receiver of 2022 – Romance University
After hours researching and comparing all models on the market, Romance University finds out Top 18 Best Usb Ir Receiver of 2022. Check our ranking below.
2,876 Reviews Scanned
- Control your NVIDIA Shield, FireTV, Pi, or PC. Compatible with Harmony, or almost any remote control
- Also works with Playstation, XBOX 360, Raspberry PI, Windows Media Center, Kodi, Plex, and many more
- Flirc’s easy-to-use software walks you through the entire pairing process and works on Windows, OSX and Linux
- New version brings many new software features, hardware features, and partners
- Control your Streamers lacking an IR receiver with the Inteset INT422 or the Harmony universal remotes.
- Supports Fire TV requires a "Y" Cable (except Gen 1 Stick), Nvidia Shield (2nd Gen & 2019 Pro), Media Center, Kodi and Raspberry Pi. "Y" Cable sold separately
- The INT422 will also work with nearly all TV's, Streamers and other devices that do not require an add-on IR Receiver
- No Drivers are needed. Plug and Play to any 2 amp USB port in the device you want to control
- Blue LED flashes when a signal is received. LED can be turned on/off on Fire TV & Nvidia Shield. Cable is 3 feet long.
- IR remote control cable extends the signal to a video source like a Blu-ray player so it can be controlled from your TV; Blue LED in IR Receiver bulb verifies the signal transmission
- Home theater accessory repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an IR sensor; Route the infrared remote control extender cable out of sight with a wall mounted TV; Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely
- Simple installation of this lightweight IR cable; Locate the IR Blaster near the source sensor to repeat the signal to the source; Place the IR Receiver in a convenient location with line of sight of your hand-held remote; IR Tx and Rx cables have adhesive circles on the back for mounting
- USB powered IR extension cable has an integrated 6 foot Y-cable to receive 5V USB power; USB cable on the IR remote extender cable connects to a TV USB power port or to a USB wall charger
- Universal compatibility of IR extender cable with most A/V equipment with infrared sensors (not RF); 30 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote
- STREAMLINE your entertainment center by hiding your cable box, receiver, amp, Roku & other IR controlled devices hidden behind closed doors. No more boxes sitting out on the shelf or leaving cabinet doors open when your watching TV just so you can use your remote control! Give your living space a more refined, more streamlined look! CONTROL 1 to 4 devices using our kit depending on which model you choose. We have models to cover 1, 2 or 4 devices. Choose the model that best suits your setup for.
- COMPATIBLE with all IR controlled devices! We have tested our IR repeater kits with thousands of IR devices to make sure that they work and work well with all frequencies of IR dual band included. No matter the make/model of your devices, as long as they use an IR remote control, our IR extender kit will work with it. Compatible with: Charter, Cisco, DirecTV, Dish Network, Marantz, Motorola, Onkyo, Roku, Scientific Atlanta, Sony, Spectrum, U-Verse, Yamaha, & more! Still uncertain? Contact BAFX!
- SIMPLE, EASY & COMPACT setup with our all-in-one cable IR repeater / remote control extender kit. Plug the USB into your TV, set top box or other device for power (you may also use a wall adapter - sold separately), then paste the emitter using it's own adhesive over the IR receiver on the device you wish to control. Lastly, place the IR receiver end in the line of sight of your remote control (no further than 28' from remote control) and that's it! You're all set!
- RESISTANT to interference from stray infrared sources such as plasma TV's & CFL lightbulbs! Worried that your plasma TV or CFL bulbs will cause interference with this IR repeater just like your old IR repeater you bought years ago? Worry no more! With our new plasma resistant technology nearly all of these trouble causing stray IR signals are filtered out! No more randomly changing channels or flashing lights caused by your TV or lightbulbs!
- EXCELLENT MANUFACTURER WARRANTY from BAFX Products. Even though this is extremely inexpensive, BAFX Products stands behind everything we sell or we won't sell it. Your all-in-one IR extender is covered by our 1 year warranty against manufacturing defects and is super easy & simple to claim should the need arise! We also extend Amazon's normal 30 day return period with our 60 day, no hassle, no questions asked return policy. Miss the return window from Amazon? No problem. Just contact BAFX!
- This infrared remote extender can work with all 38-56KHz frequency remotes, it is a truly universal IR extender!
- IR emitter and receiver kit is easy to install by simply paste and plug the USB, extending remote distance to 49.21ft immediately!
- IR repeater system can help to hide your cable box behind the closed doors to keep the room clean and tidy without effect the remote function.
- Infrared remote transmitter kit compatible with Cable Boxes, Set-top Box, Car-mounted DVD, Car Audio System, Hard Disk Player, DVR, PVR, Satellite Receiver, etc.
- If you are not 100% satisfied with this Herfair hidden IR extension kit, please contact us for refund or replacement! Herfair offers 30 days free return and 18 months warranty!
- This USB IR receiver is suitable for home, hotel and other set-top boxes hidden or shared use of set-top boxes. Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
- It can receive wide frequency, which allows users no longer because of remote control receiving frequency mismatch caused by remote control is not sensitive or can not control.
- Great compatibility with a wide range of equipment, devices, STB set top boxes. 180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote. Remote control signal receiving real-time response to fast forward without delay.
- The receiving end has a length of 1.4 meters and the transmitting end has a length of 2 meters. The user can cut it off and lengthen to the required length.
- We've been working in electronics for years and accumulated rich experience, and now we want to share our products'preferences and ingenuity for you to bring you a more fashionable and artisticlife experience.
- Control your Fire TV Stick, Pendant & Cube with the Inteset INT422-3 & Harmony universal remotes.
- Supports all Fire TV Devices. Carefully follow installation diagrams.
- The INT422-3 will also work with nearly all TV's, Streamers and other devices that do not require an add-on IR Receiver
- No Drivers are needed. Plug and Play to any USB port in the device you want to control
- Blue LED flashes when a signal is received. LED can be turned on/off. Cable is 3 feet long.
- [Improve Sensitivity] With this IR receiver, the remote control signal could be easier received by the TV or set-top box.
- [Wide Frequency] This IR receiver can receive wide frequency, which allows users no longer because of remote control receiving frequency mismatch caused by remote control is not sensitive or can not control.
- [USB] Support TV, set-top box with USB interface, please note that the USB port has only power function, it doesn't have data function.
- [Wide Compatibility] This USB IR receiver is suitable for home, hotel and other set-top boxes hidden or shared use of set-top boxes.
- [Service Guarantee] If you have any questions about this Infrared Remote Control Range Extend Cable, please feel free to contact us.
- High sensitivity: Remote control signal receiving real-time response to fast forward without delay
- Allows IR signals to pass through solid doors or walls, line-of-sight to the components is not required Confirmation LED built-in to the IR receiver acknowledges receipt of IR commands
- Easy Setup: This IR Repeater System is easy to use and sets up in minutes
- 5V USB Power Supply(Adapter not included)
- Control Audio Video Components in Entertainment Cabinets or Equipment Closets using Existing IR Remote Controls
- -This IR Repeater Kit Allows You to Control A/V component by the Existing IR Controller, Control the IR Devices Between Two Rooms Such as Adjusting the Volume or Changing TV Channel.
- -With 1 Receiver Picks up the Signal from the Remote Controller, the Receiver is with a Convenient IR Confirmation LED
- -With 4 emitters send the Signal to the A/V Components
- -34-60kHz Operating Range(Please Aim at IR Receiver when Using Remote Control)
- -5V USB AC Power Supply
- IR remote control cable extends the signal to a video source like a Blu-ray player, DVD player, STB box, AV receiver or other A/V source with an infrared sensor so it can be controlled from your HDTV
- Simple installation IR Repeater cable allows you to control home theater components located behind closet cabinet doors
- Place the IR emitter blaster near the source sensor to repeat the signal to the source; Place the IR Receiver in a convenient location with line of sight of your hand-held remote; IR Tx and Rx cables have adhesive circles on the back for mounting
- USB powered IR extension cable has an integrated 6 foot Y-cable to receive 5V USB power; Connect to an HDTV USB port or to a USB wall charger power supply (sold separately)
- Compatible with most A/V equipment with infrared sensors (not RF)
- Suitable for all remote controls
- Cable length from USB to receiver: Approx. 137cm53.94 ". Cable length from receiver to transmitter: Approx. 198cm77.95 "
- The way to power: household appliance or USB 5V power supply. Power supply via 5V USB cable
- Install: 1. Use the double-sided tape to keep the receiver in a convenient location. 2.Stay the infrared emission head on the device you want to control
- Your complete satisfaction is our ultimate goal. If you have any questions, please feel free to contact us.
- IR REMOTE CONTROL - Simplify your entertainment center by hiding your cable box, receiver, amp, Roku & other IR controlled devices hidden behind cabinet doors and a wall. No more boxes placing on the shelf or leaving cabinet doors open when your watching TV just so you can use your remote control!This was a very economical and effective way to make it happen.
- EASY TO USE - Plug the USB into your TV, set top box or a 5V wall adapter(adapter not included) for supply power, then paste the IR emitter(small end) using it's own adhesive over on the device with an IR sensor you wish to control(up to 10cm/3.9inch).Lastly, place the IR receiver(big end) end in the line of sight of your remote control (up to 10m/ 32ft).
- WIDE BAND TECHNOLOGY - 20-60KHZ,works on most infrared control devices(not RF)! Suitable for infrared remote control, infrared extender, DVD player, STB box,Cisco,DirecTV,Roku, Sony, Yamaha,etc.
- EXCELLENT SIGNAL RANGE - 180 degree IR receiving angle provides enough space for your remote control to get the right angle. The remote control signal receives a real-time response and moves forward quickly without delay.
- HIDDEN DEVICES - Devices that require remote control must be placed where you cannot directly control your remote control. Otherwise, the signal from the remote control and the forwarded remote control signal will be sent to the set-top box at the same time. Signals out of sync can interfere with each other and cause them to stop working.
- IR remote control cable extends the signal to a video source like a Blu-ray player, DVD player, STB box, AV receiver or other A/V source with an infrared sensor so it can be controlled from your HDTV
- Simple installation IR Repeater cable allows you to control home theater components located behind closet cabinet doors
- Place the IR emitter blaster near the source sensor to repeat the signal to the source; Place the IR Receiver in a convenient location with line of sight of your hand-held remote; IR Tx and Rx cables have adhesive circles on the back for mounting
- USB powered IR extension cable has an integrated 6 foot Y-cable to receive 5V USB power; Connect to an HDTV USB port or to a USB wall charger power supply (sold separately)
- Compatible with most A/V equipment with infrared sensors (not RF)
- IR Learning: Power button of this remote controller is programable. It could learn the code of the power button from other IR remote, so that it could turn on/off the device.
- Easy to Operate: The remote comes with a USB dongle, supports Plug and play, and CD-ROM installation is free, it is specially designed for Android system to realize human-computer interactions, and enhance the feel of experience.
- Low Power Consumption: This 2.4g wireless remote will go to standby mode without operation for 30s
- Wide Compatibility: This controller is applicable to Android TV Box, Projector, Smart TV(NOT all brands), IPTV, Networked Set-top Box, Mini PC, HTPC, etc.
- 10m Control Distance: Control distance of this universal remote could reach to 10 meters, which is completely sufficient to operate indoors.
- ✅ COMPLETE SIGNAL COVERAGE: Wireless RF signals operate between the transmitter and receiver, allowing you to move around freely and still be in control of your A/V or IR-enabled equipment remotely up to 200 meters(656 feet) away(line-of-sight), depending on surrounding obstructions.
- ✅ WIDE COMPATABILITY: IR receiving module recognizes IR signal frequency ranges from 20 to 60 KHz, compatible with most IR-equipped devices such as DVD players, cable boxes, satellite receivers, audio/Hi-Fi stereo systems, etc.
- ✅ HIGH PERFORMANCE IR electronics provide real time signal transmission without delay ; Features Click Lock ID button pairing the transmitter and receiver, preventing interference from other devices.
- ✅ EASY INSTALLATION: Portable size design with bundled infrared extension cables allow easy and flexible placement anywhere in a home or office environment. Please keep in mind to place the extension cables in line-of-sight of the source IR sensor no further than 2 inches for best signal.
- ✅ PREMIUM QUALITY: Aluminum housing enhances heat dissipation and durability for durable and dependable performance. Supported with a 2 year warranty and life time technical support located in California.
- Will wake up any PC from a complete off state (wake from S5), Functions on nearly all motherboards that run Windows or Linux operating Systems
- Does not require any special motherboard technologies. Does not require any special BIOS settings or manufacturer drivers. Controls popular media center software applications out-of-the-box including Kodi (XBMC), Windows Media Center, MediaPortal, and applications supporting the Windows eHome or Linux LIRC native drivers.
- Works with any IR RC6 compatible learning remote control. Custom made cables provide easy installation on any standard motherboard. See the Review of the IRS5 at the on-line site ""Missing Remote". Just "Google" PC-IRS5-01 to see the link.
- Small footprint. The PC-IRS5-01 measures only 1 inch by 1.5 inches. Ships with a mounting bracket and hardware.
- Can be mounted anywhere inside an HTPC case with the External IR Extender kit which is included. Complete installation instructions are provided along with detailed assembly videos.
- Use as many a 10 different device groups without interference in the same building. No direct line-of-sight needed. IR Repeater and an IR Extender-Single unit can be used as a Repeater. Not for use with RF Remotes.
- Works great with the Inteset INT422 Remote. Range between IR units up to 300 feet in open space. Some walls may reduce distance.
- IR Frequencies: 20-60 kHz-Covers virtually all standard A/V devices. Compliant and licensed with CE, FCC, EMC. Many other products on the market are not licensed.
- Bi-Directional, full band IR Control-Both Units send and receive IR (Units are interchangeable). Automatic Channel Pairing-Allows multiple Units to be used in close proximity w/o interference.
- Compatible with Inteset Model INT-3856-WRLS Single Channel Wireless Units when in Channel 0. Unit Dimensions 2" x 1.25" x 0.5". Weight is 1 oz. One year warranty.
How Do You Buy The Best Usb Ir Receiver?
Do you get stressed out thinking about shopping for a great Usb Ir Receiver? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Usb Ir Receiver, which is why we have assembled a comprehensive list of the greatest Usb Ir Receiver available in the current market. We’ve also come up with a list of questions that you probably have yourself.
Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Usb Ir Receiver that you consider buying. Your questions might include the following:
- Is it worth buying an Usb Ir Receiver?
- What benefits are there with buying an Usb Ir Receiver?
- What factors deserve consideration when shopping for an effective Usb Ir Receiver?
- Why is it crucial to invest in any Usb Ir Receiver, much less the best one?
- Which Usb Ir Receiver are good in the current market?
- Where can you find information like this about Usb Ir Receiver?
We’re convinced that you likely have far more questions than just these regarding Usb Ir Receiver, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Usb Ir Receiver, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Usb Ir Receiver. Make sure that you are only using trustworthy and credible websites and sources.
Romance University provides an Usb Ir Receiver buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Usb Ir Receiver currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Usb Ir Receiver has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Usb Ir Receiver?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Usb Ir Receiver.
- Customer Ratings: Number ratings grade Usb Ir Receiver objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Usb Ir Receiver.
- Product Quality: You don’t always get what you pay for with an Usb Ir Receiver, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Usb Ir Receiver is should be an indication of how long it will work out for you.
Romance University always remembers that maintaining Usb Ir Receiver information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Usb Ir Receiver is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
Related Post:
- Denon Av Receiver Audio & Video Component Receiver Black Avrs540Bt
- Logitech Unifying Usb Receiver
- Tomtom Usb Lifetime Free Traffic Receiver Car Charger
- Usb To Usb-C
- Mini Usb To Usb
- Owon Vds1022I Usb Pc Oscilloscope Mit Usb Isolation 25 Mhz
- In Usb 1 Infinity Usb Foot Pedal For Computer Transcription
- Usb To 3 4 Pin Pwm 5V Usb
- Dsyj Micro Usb Host Otg Cable With Micro Usb
- Usb 3.0 To Usb C