18 Best Zooz Z Wave Plus S2 Multisiren Zse19 of 2022 – Romance University
After hours researching and comparing all models on the market, Romance University finds out Top 18 Best Zooz Z Wave Plus S2 Multisiren Zse19 of 2022. Check our ranking below.
2,545 Reviews Scanned
- READ BEFORE YOU BUY: The Z-Wave stick is for advanced users only, NOT for beginners. You must be comfortable with programming and have expert computer and Z-Wave knowledge to use this device. NVM back-up from 500 or 700 series Z-Wave sticks will brick the device. Do NOT apply NVM backups or firmware updates published outside of the Zooz support portal to avoid bricking the stick and voiding its warranty.
- NEW 800 SERIES Z-WAVE LONG RANGE: Take advantage of the latest wireless innovation with Z-Wave Long Range that extends your network coverage up to a mile. NOTE: Your home automation software needs to support the Long Range implementation on the interface side as well as the end Z-Wave device you add to the network for the Long Range functionality to be fully unlocked.
- WHAT YOU NEED: This 800 Series Long Range Stick adds Z-Wave Plus and Z-Wave Long Range capability to your DIY smart home set-up. You'll need a dedicated computer (PC, laptop, or Raspberry Pi, sold separately) and home automation software of your choice (not included) to complete the system.
- ADVANCED Z-WAVE: Works great with the most popular software like Home Assitant (with JS) and HomeSeer. Supports OTA firmware updates and and all of the latest Z-Wave library commands.
- Z-WAVE CONTROL: Add Z-Wave to your outdoor lighting and enjoy the convenience of scheduling and smart rules for extra energy savings (up to 15 A resistive load; no dimming control); Z-Wave hub required (sold separately); scroll down for compatibility.
- OUTDOOR HOUSING: This plug is IP65 rated with weatherproof housing that makes it safe for outside use. It works great for Holiday lights, small pumps, and patio lighting.
- 700 SERIES CHIP: Equipped with SmartStart and S2 Authenticated Security, the device incorporates the latest safety feature of the Z-Wave protocol, making your network more reliable and secure.
- SIGNAL REPEATER: Boost the signal of your network with extra range from the plug. It acts as an extender to all of your Z-Wave devices for better communication speed and lag-free wireless experience.
- LIFETIME TECH SUPPORT: Get your questions answered by a Z-Wave expert 7 days a week. Register your product for an extended 5-year warranty.
- TEMPERATURE SENSOR: Monitor air temperature in every room to get the most of your smart thermostat (sold separately). Make your home more comfortable with precise data sent by this smart sensor. Z-Wave hub required (sold separately, scroll down for compatibility).
- HUMIDITY SENSOR: Increase the air quality of your bedroom or home office with humidity level reports you can use to trigger your smart humidifier (sold separately). Stay in full control of the environment you spend the most time in.
- DISCREET & SECURE: Enjoy the minimal design of this device and extra small size that will help it blend into any interior. It comes with the 700 series Z-Wave chip offering longer range, better battery life, and the highest level of S2 security with SmartStart for fully encrypted communication.
- OUTDOOR BRACKET AVAILABLE: The sensor is coated with rubber oil protecting it against corrosion and water leak damage. You can mount the sensor outdoors under eve (no direct sunlight or rainfall) with the recommended mounting bracket (sold separately, ask Zooz about it).
- Z-WAVE COMPATIBILITY: Supported by open Z-Wave systems only, including Home Assistant (Z-WaveJS), HomeSeer, and Hubitat. Compatible with SmartThings. Ring Alarm supports temp monitoring only (no settings or humidity reports). NOT supported by alarm panels like Vivint, Qolsys, 2GIG, ADT. If the sensor isn't working for you, it's likely that your hub doesn't support the new 700 series Z-Wave. This sensor is Z-Wave Plus certified. Contact Zooz tech support with questions or issues 7 days a week!
- SMARTER ON/OFF CONTROL: Turn your lights on and off remotely or automatically through Z-Wave. Hub required (sold separately), scroll down for compatibility. Voice control with Z-Wave hub ONLY (will NOT work directly with your smart speaker).
- NEW 800 SERIES Z-WAVE: Boost your network with the latest Z-Wave technology that offers more range and faster communication speed than ever before. This device is Long Range ready so if your hub or home automations software supports Z-Wave LR, get ultra reliable direct communication between the switch and hub. Works as an extender in a traditional mesh. And if you need to troubleshoot connectivity issues, access a built-in range test tool straight from the switch!
- SIMPLE 3-WAY & 4-WAY: Use it with existing on/off switches (NO dimmers) in your 3-way, 4-way, or 5-way set-up, even if load and line are not in the same box. No need for add-on switches, no need to rewire other boxes. Just wire the Zooz in the box with power and neutral (check your boxes before buying).
- FASTER INSTALLATION: The new model is only 1.16" deep so you can easily fit it in a shallow or crowded box. It takes half the time to install the S2 switches in 3-way and 4-way set-ups than for any other Z-Wave solution. Intuitive wiring diagrams are printed in the manual (look for more on Zooz website) and if you need custom instructions, just ask!
- BONUS FEATURES: Scene control (your hub needs to support multi-tap triggers), multicolor LED indicator with adjustable brightness levels (your hub needs to support advanced settings), instant status updates, and replaceable paddles (light almond, brown, and black paddles sold separately).
- 3 RELAYS IN 1: Control 3 dry contact relays independently with one MultiRelay. Connect an optional wall switch for manual on/off control (dry contact only, NO voltage on the input side) or use your Z-Wave hub (required, sold separately) for wireless control and automation. Your smart speaker is NOT a Z-Wave hub. Does NOT fully work with Wink or Z-Wave alarm panels like Ring, Vivint, or Alarm.com (R1 control only). Custom edge driver required for SmartThings, go to Zooz support page for details.
- VERSATILE APPLICATIONS: Great to automate your garage door (up to 3 doors with just 1 MultiRelay!), commercial garage doors at your business, gas fireplace, sprinklers, doorbell, landscape lights, pool pump, whole house fan, and any 1-240 V device up to 20 A.
- DIY INSTALLATION: Power it with a standard USB C cable and a 5V power supply (do NOT use USB chargers or Apple accessories) or 12-24 V AC/DC power source. Wall-mount ready. Power adapter or USB cable NOT included. Jumper wires NOT included. Do NOT power with 110 V! Do NOT apply Voltage to the input (switch) terminals!
- RELIABLE Z-WAVE: Comes with the latest S2 security and SmartStart technology. Z-Wave Long Range ready if your hub supports ZWLR for ultra fast signal and great wireless coverage. Remembers and restores on/off status after power failure. Built-in auto-on and auto-off timer available if your hub supports advanced settings. The device is ETL certified and conforms with North American safety standards.
- HUB COMPATIBILITY: This is an advanced Z-Wave device and it requires an open Z-Wave hub to display correctly. Works best with the Z-Box Hub. It was tested to work well with Hubitat, Home Assistant, and on SmartThings with a custom device driver (please go to Zooz support page for details). ADT Pulse, Vivint, Wink, and Ring all offer partial control (one relay or all at once instead of individual control for the relays, no access to settings).
- ADD Z-WAVE TO SMOKE AND CO ALARMS: Wire the DC Signal Sensor to your interconnected smoke and CO detectors and receive deticated notifications if either of them is triggered. NOTE: This is NOT a security alarm component and the device is NOT part of a life-safety system. Check local regulations before installing. Check Z-Wave compatibility first, this is an advanced device supported by selected hubs only (scroll down for details).
- OPTIONAL RELAY CONTROL: Utilize the 120 V relay to add smart control of lights or siren as additional functionality. Do NOT use for other low-Voltage applications. This device comes with SmartStart for quick and secure network inclusion.
- LONG RANGE READY: If your hub and automation software support Z-Wave Long Range, you'll get extended coverage without network lags and dropouts! And for traditional set-ups, the built-in signal repeater keeps your mesh networks stable and fast.
- EASY INSTALLATION: Pigtail wires included to save you time when wiring the dimmer for an hassle-free set-up. This product is backed by a lifetime US based support from Zooz and a 5-year warranty once registered.
- HUB COMPATIBILITY: This is an advanced Z-Wave device and it requires an updated Z-Wave hub to display correctly. It was tested to work well with the Z-Box Hub (recommended for Zooz devices), Hubitat with custom driver, Home Assistant (Z-Wave JS), Ezlo, and it's compatible with SmartThings through a custom edge driver (available through the Zooz support portal).
- BETTER Z-WAVE NETWORK: Add the range extender to boost signal in your Z-Wave network to help devices on the edge communicate faster with your hub. It repeats signal for all generations and versions of Z-Wave devices in the mesh.
- POWER OUTAGE REPORTS: If your hub supports advanced functionality, it will display power outage reports from the extender if the receptacle it's plugged into loses power. It's equipped with built-in backup battery.
- 800 SERIES CHIP: Get more range than ever with the latest generation Z-Wave chip. Build a more reliable smart home you can depend on.
- EXTRA SECURITY: This device supports SmartStart and S2 Authenticated Security, the highest possible level of security in the Z-Wave protocol to help you keep your smart home private.
- LIFETIME TECH SUPPORT: Get your questions answered by a Z-Wave expert 7 days a week. Register your product for an extended 5-year warranty.
- FAST DETECTION: Reports motion to your Z-Wave smart home system reliably. Great solution for light automation and security monitoring. Z-Wave hub required, sold separately. Custom driver needed for SmartThings (go to Zooz Support Portal). NOT supported by Wink, ADT, Vivint, or Alarm.com.
- EXTRA FEATURES: Adjustable motion sensitivity and retrigger time. Built-in Z-Wave range test tool for easier network troubleshooting. Vibration reports on SmartThings and other selected hubs.
- 2 POWER SOURCES: Runs on a single battery for up to a year (depending on traffic and settings) OR on micro USB cable (NOT INCLUDED). Acts as signal extender when included with USB power.
- FLEXIBLE DESIGN: Extremely small and light, the sensor sits in a perfectly shaped magnetic mounting base for precise and firm positioning.
- CERTIFIED SECURE: Uses the latest authenticated S2 Z-Wave protocol and AES-128 signal encryption. 800 Series Z-Wave Plus chip for longer range and increased battery life. This device is Long Range ready with extra 1000 feet of coverage if your hub supports this feature.
- REMOTE CONTROL: Use the paddles like remote control buttons to trigger scenes and turn other smart home devices on or off. Z-Wave hub required, sold separately. NOTE: your smart speaker is NOT a Z-Wave hub.
- ANYWHERE SWITCH: Install it in a regular switch box or stick it to any flat surface for convenient and wire-free control. This is a battery-powered device with a magnetic base that allows a flexible installation anywhere you always wanted another light switch (no electrician needed!).
- Z-WAVE HUB COMPATIBILITY: Most basic Z-Wave systems aren't advanced enough to allow scene control programming. The ZEN34 is supported by: Z-Box Hub (recommended), works with SmartThings (with a custom driver, instructions included with the product), Hubitat, and Home Assistant. Please do NOT buy this device if your hub isn't listed here, it will not be recognized correctly by your system.
- NEW 700 SERIES: This product is built on the latest 700 series Z-Wave chip for better signal coverage than ever, faster communication, with S2 authenticated security and SmartStart for effortless pairing.
- Reliable Motion Detection: Get instant alerts to your Z-Wave hub (sold separately) when the sensor detects movement in its wide 30-foot radius.
- Temperature Monitoring: Monitor outdoor or indoor temperatures and use the data to trigger connected smart devices.
- Smart Lighting Integration: Program Z-Wave outdoor lights to turn on when the sensor reports motion and low lux levels.
- Z-Wave Long Range Ready: Extend the wireless range up to 1300 feet if your hub supports the new ZWLR technology. The sensor is built on the latest 800 series chip for extra speed and dependable connection.
- Flexible Installation: Use the included 2 CR123A batteries or connect the sensor to a 12V power supply (sold separately). The device works as a Z-Wave signal repeater when included on 12 V power.
- 4 REMOTE BUTTONS: Program each button to activate up to 24 scenes or other devices in your network for one-touch control of your favorite smart lighting presets. Use the buttons to enter "Away" mode on your way out or to turn off all of the lights before you go to bed with a single click.
- FLEXIBLE INSTALLATION: Put it in a standard decora box next to your switches, fix it to a wall, or keep it handy on your night stand. The Wall Remote comes with a magnetic base and a stylish screwless wallplate.
- RECHARGEABLE BATTERY: This handy remote comes with a rechargeable battery so it's easy to use and maintain. No wires, no hassle. 5-year extended warranty once registered plus lifetime tech support.
- Z-WAVE HUB COMPATIBILITY: Most basic Z-Wave systems aren't advanced enough to allow scene control programming. The ZEN37 Wall Remote is supported by the Z-Box Hub (recommended for Zooz products) and works with SmartThings (with a custom driver, instructions included with the product), Hubitat (custom driver required), Home Assistant, and HomeSeer. Please do NOT buy this device if your hub isn't listed here, it will not be recognized correctly by your system.
- LONG RANGE READY: This product is built on the latest 800 series Z-Wave chip for better signal coverage than ever. If your Z-Wave hub supports Long Range, you'll enjoy up to 1300 feet in range and ultra reliable direct-to-hub communication. S2 authenticated security and SmartStart offer an effortless and safe pairing experience.
- FAST AND RELIABLE: Get notified on your Z-Wave hub's app or via text when a door or window is opened for easy DIY security monitoring. Use on safety gates, cabinet doors, patio doors, and more. Z-Wave hub required, sold separately (check below for compatibility).
- EXTRA SMALL: Perfect for discreet mounting with a slim profile to fit most frames and surfaces.
- OUTDOOR CASE AVAILABLE: The sensor is coated with protective rubber oil against corrosion and water leak damage. A splash is fine but if you want to install it outdoors, you'll need a dedicated waterproof case (sold separately, ask Zooz about it).
- Z-WAVE COMPATIBILITY: Works best with the Z-Box Hub. Supported by open Z-Wave systems only, including Home Assistant, HomeSeer, Hubitat, Vera, and Ezlo hubs. Compatible with SmartThings and Ring Alarm (no access to advanced settings). NOT supported by alarm panels like Vivint, Qolsys, 2GIG, ADT, or others.
- SMART SECURITY: 800 series Z-Wave chip with longer range, better battery life, and the highest level of S2 security with SmartStart for fully encrypted communication. If your hub supports ZWLR, you'll benefit from ultra reliable wireless communication and up to 1300 feet of range. Covered by a 5-year extended warranty once registered and backed by lifetime tech support 7 days a week.
- 2 SMART OUTPUTS: Control 2 dry contact relays independently with one Z-Wave device. Choose from normally closed (10 A) and normally open (20 A) relays to automate almost any electrical device. Connect an optional wall switch for physical on/off control or use your Z-Wave hub (required, sold separately) for wireless control. Your smart speaker is NOT a Z-Wave hub. This product is NOT supported by Wink or Z-Wave alarm panels.
- 2 SMART INPUTS: Monitor 12-24 V or dry contact inputs separately from the dry contact outputs. Connect analog binary sensors to receive status updates in your Z-Wave hub from a connected door sensor, water sensor, HVAC system, or alarm panel. Use the inputs to trigger the outputs automatically.
- AUTOMATE ANYTHING: Add Z-Wave connectivity to up / down DC motors in screens, motorized blinds, or awnings. Perfect to automate your garage door opener (use a single ZEN17 to control up to 2 garage doors independently), commercial gates, gas fireplace, sprinklers, doorbell, outdoor lighting, pool pump, whole house fan, and any 1-240 V device up to 20 A.
- QUICK INSTALLATION: Power it with a 12-24 V AC/DC power source or a standard USB C cable (included) and a power supply (sold separately). Wall-mount ready. Jumper wires NOT included. Do NOT power with 110 V!
- NEW 800 Z-WAVE: Enjoy better signal coverage and a stronger Z-Wave repeater for your mesh network with the latest 800 series chip. Long Range ready if your hub supports this feature! It comes with S2 authenticated security and SmartStart for easy pairing. Remembers and restores on/off status after power failure. Built-in auto-on and auto-off timer available if your hub supports advanced settings. The device is ETL certified and conforms with North American safety standards.
- PREVENT WATER DAMAGE: Receive alerts on your phone when water is detected by the sensor once you include it to your Z-Wave hub (required, sold separately). Check below for compatibility. Pair with the Zooz Titan Water Valve actuator (sold separately) for a smart flood prevention system.
- EXTRA SMALL: Place it under your appliances to monitor for leaks discreetly. NEW design with fully sealed battery cover and IP66 rating.
- NEW 800 SERIES CHIP: You get more Z-Wave range and longer battery life with this upgraded sensor. Better signal means more reliable and quicker reports to help you act faster in case of a leak. It's also Z-Wave Long Range ready so if your hub supports this feature, you'll enjoy ultra stable direct communication between devices.
- Z-WAVE COMPATIBILITY: Supported by open Z-Wave systems only, including Home Assistant, HomeSeer, Hubitat, and Ezlo hubs (NOT supported by older Vera hubs). Works best with the Z-Box Hub. Compatible with SmartThings. NOT supported by alarm panels like Ring Alarm, Vivint, Qolsys, 2GIG, ADT, or others.
- SMART SECURITY: Equipped with the highest level of S2 security with SmartStart for fully encrypted communication. Covered by an extended 5-year limited warranty once registered and backed by lifetime tech support 7 days a week.
- READ BEFORE YOU BUY: The GPIO module is for advanced Home Assistant and home automation users only, NOT for beginners. You must be comfortable with programming and have expert computer and Z-Wave knowledge to use this device.
- NEW 800 SERIES Z-WAVE LONG RANGE: Take advantage of the latest wireless innovation with Z-Wave Long Range that extends your network coverage up to a mile. NOTE: Your home automation software needs to support the Long Range implementation on the interface side as well as the end Z-Wave device you add to the network for the Long Range functionality to be fully unlocked.
- WHAT YOU NEED: This 800 Series Long GPIO module adds Z-Wave Plus and Z-Wave Long Range capability to your DIY smart home set-up on a Raspberry Pi or Home Assistant Yellow hardware (sold separately). You'll need a home automation software of your choice (not included) to complete the system.
- Z-WAVE SET-UP: Follow the detailed instructions from the QR in the manual to install your module and refer to the Home Assistant / Z-Wave JS documentation to set up your Z-Wave integration according to the recommended method. Supports OTA firmware updates and and all of the latest Z-Wave library commands.
- SMART DOUBLE SWITCH: Control 2 loads independently with just one Double Switch. Dim the lights using the paddles and turn the connected fan on or off using the relay button (NO SPEED CONTROL for the fan). Control each load remotely from your Z-Wave hub (required, sold separately). Alexa is NOT a Z-Wave hub. Does NOT work with Z-Wave alarm panels like ADT, Ring, Vivint, or Alarm.com. Custom driver required for SmartThings, contact seller for details.
- MULTI-FUNCTIONAL DIMMER: Smooth brightness control for incandescent and LED bulbs (up to 75 Watts of LEDs). Smart bulb ready! Double tap to full brightness, adjustable ramp rate, and dimming speed (your hub needs to support advanced setting input). NO DIRECT 3-WAY, only virtual 3-way available. Contact support for details.
- POWERFUL RELAY: Connect any load up to 15A, including ceiling and exhaust fans for reliable on/off control from the relay button and via Z-Wave. Or use the button for scene control (multi-tap supported by select hubs only, contact support before buying).
- NEW 800 SERIES Z-WAVE LONG RANGE: Boost your network with the latest Z-Wave technology that offers more range and faster signal speed than ever before. Your hub (or home automation software) needs to support Z-Wave Long Range for extra reliable direct-to-hub communication. The Double Switch will act as a signal extender in a traditional mesh network.
- HUB COMPATIBILITY: This is an advanced Z-Wave device and it requires an open Z-Wave hub to display correctly. Works best with Z-Box Hub. It was tested to work well with Home Assistant, Hubitat, and on SmartThings with a custom device driver (please go to Zooz support page for details). NOT supported by Vivint, ADT Pulse, Ring, or Alarm.com
- 6-in-1 Z-Wave Plus multi-sensor: motion, humidity, temperature, light lux, UV, vibration sensor
- Super-small at 1.8 inches. Can be installed in corner, in-wall, on shelf or in recessed downlight fitting
- 700 Series Z-Wave MultiSensor: This is the next generation MultiSensor to the best selling Aeotec MultiSensor 6
- Batteries Included: Use wirelessly with the included batteries
- USB powered: If you tired of changing batteries, use a USB power supply for MutliSensor 7
How Do You Buy The Best Zooz Z Wave Plus S2 Multisiren Zse19?
Do you get stressed out thinking about shopping for a great Zooz Z Wave Plus S2 Multisiren Zse19? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Zooz Z Wave Plus S2 Multisiren Zse19, which is why we have assembled a comprehensive list of the greatest Zooz Z Wave Plus S2 Multisiren Zse19 available in the current market. We’ve also come up with a list of questions that you probably have yourself.
Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Zooz Z Wave Plus S2 Multisiren Zse19 that you consider buying. Your questions might include the following:
- Is it worth buying an Zooz Z Wave Plus S2 Multisiren Zse19?
- What benefits are there with buying an Zooz Z Wave Plus S2 Multisiren Zse19?
- What factors deserve consideration when shopping for an effective Zooz Z Wave Plus S2 Multisiren Zse19?
- Why is it crucial to invest in any Zooz Z Wave Plus S2 Multisiren Zse19, much less the best one?
- Which Zooz Z Wave Plus S2 Multisiren Zse19 are good in the current market?
- Where can you find information like this about Zooz Z Wave Plus S2 Multisiren Zse19?
We’re convinced that you likely have far more questions than just these regarding Zooz Z Wave Plus S2 Multisiren Zse19, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Zooz Z Wave Plus S2 Multisiren Zse19, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Zooz Z Wave Plus S2 Multisiren Zse19. Make sure that you are only using trustworthy and credible websites and sources.
Romance University provides an Zooz Z Wave Plus S2 Multisiren Zse19 buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Zooz Z Wave Plus S2 Multisiren Zse19 currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Zooz Z Wave Plus S2 Multisiren Zse19 has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Zooz Z Wave Plus S2 Multisiren Zse19?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Zooz Z Wave Plus S2 Multisiren Zse19.
- Customer Ratings: Number ratings grade Zooz Z Wave Plus S2 Multisiren Zse19 objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Zooz Z Wave Plus S2 Multisiren Zse19.
- Product Quality: You don’t always get what you pay for with an Zooz Z Wave Plus S2 Multisiren Zse19, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Zooz Z Wave Plus S2 Multisiren Zse19 is should be an indication of how long it will work out for you.
Romance University always remembers that maintaining Zooz Z Wave Plus S2 Multisiren Zse19 information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Zooz Z Wave Plus S2 Multisiren Zse19 is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.