Contents

20 Best Elegoo Nano Board Ch340 Atmega328P of 2023 – Romance University

After hours researching and comparing all models on the market, Romance University finds out the Best Elegoo Nano Board Ch340 Atmega328P of 2023. Check our ranking below.

2,637 Reviews Scanned

Rank No. #1

2-Pack Nano Board, Aideepen V3.0 Nano ATmega328P CH-340 Development Board Without Cable Mini USB Port with PIN Headers Pin Unsoldered

【Nano V3.0】Support ISP download,Using Atmel Atmega328P-AU MCU.
【CH-340 chip】not FT2322,greatly reduces the cost of the module.
【MINI USB port】V3.0 Nano ATmega328P Development Board Without Cable,MINI USB port with PIN Headers Pin Unsoldered.
【Power】Support USB download and Power,Support for external 5V ~ 12V DC power supply.
【Why choose us】You can use it with our development board ASIN B0788MLRLK,let your project more convenient and efficient.Aideepen specializes in various electronic components,please feel free to contact us.

Rank No. #2

ELEGOO Nano Board CH 340/ATmega+328P Without USB Cable, Compatible with Arduino Nano V3.0 (Nano x 3 Without Cable)

The Nano is using the chips ATmega+328P and CH340, not FT232 as official Arduino, so pls. use the driver from our site.
It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper.
Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
Learn Arduino Nano with ease: Our ELEGOO Nano Board is the perfect choice for beginners and experts alike, with tutorials available to help you get started.

Rank No. #3

AITRIP 5pcs for Nano Board CH340/ATmega+328P Without USB Cable, Type-C Connection Compatible with Arduino Nano V3.0,Welded Module

The Nano can be powered via the Type-C USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
Support for external 5V~12V DC power supply, Support power supply by 9V battery.
The Nano is using the chips ATmega328P and CH340, Replace FT232RL.
It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper.
Uses the CH340G instead of the FTDI FT232RL IC which can improve the transfer speed, increase the stability in windows and solve the issues with FTDI drivers bricking non-original chips, ATMEGA328P offers even more programming and data memory space. It also has a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one side, power, and ground on the other).

Rank No. #4

AITRIP 2PCS Type-C USB CH340 5V 16MHz for Nano Board CH340/ATmega+328P, Type-C Connection Compatible with Arduino Nano V3.0

The Nano can be powered via the Type-C USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
Support for external 5V~12V DC power supply, Support power supply by 9V battery.
The Nano is using the chips ATmega328P and CH340, Replace FT232RL
The Nano-C is breadboard-friendly and can be powered by USB, regulated 5V supply or unregulated 7-12V source. Connectors shipped unsoldered to fit the smallest of spaces
Comes with 2packs of Nano V3.0 Micro Controller Module, each Nano V3.0 Micro Controller module is equipped with 3pcs pin headers (2pcs 15pin headers +1pcs 6pin headers), no welding needed.

Rank No. #5

AITRIP for Arduino Nano V3.0, Nano Board CH340/ATmega328P with USB Cable, Compatible with Arduino Nano V3.0 (Nano x 3 With1 Cable)

The Nano is using the chips ATmega328P and CH340, Replace FT232RL.
It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper.
Comes with 3 packs of Nano V3.0 Micro Controller Module, each Nano V3.0 Micro Controller module is equipped with 3pcs pin headers (2pcs 15pin headers +1pcs 6pin headers), no welding needed. You can download CH340 Driver from download link in the product description below. also it has 1 cable
Uses the CH340G instead of the FTDI FT232RL IC which can improve the transfer speed, increase the stability in windows and solve the issues with FTDI drivers bricking non-original chips, ATMEGA328P offers even more programming and data memory space.
USB connection: the Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27); The power source is automatically selected to the high voltage source

Rank No. #6

2-Pack Nano V3.0 Board, Aideepen V3.0 Nano ATmega328P 5V 16MHz Mini USB CH-340 Micro-Controller Board Development Board (with Cable)

【Nano V3.0】Support ISP download,Using Atmel Atmega328P-AU MCU.
【CH-340 chip】not FT2322,greatly reduces the cost of the module.
【MINI USB port】V3.0 Nano ATmega328P Development Board With Cable,MINI USB port no welding needed.
【Power】Support USB download and Power,Support for external 5V ~ 12V DC power supply.
【Why choose us】You can use it with our development board ASIN B0788MLRLK,let your project more convenient and efficient.Aideepen specializes in various electronic components,please feel free to contact us.

Rank No. #7

Nano V3.0, Nano Board ATmega328P 5V 16M Micro-Controller Board Compatible with Arduino IDE (Nano x 3 with USB Cable)

Original ATmega328P CH340 chip is used. Improved new version CH340G Replace FT232RL.
LAFVIN Nano V3.0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system.
Works the same as original Nano, runs perfectly on programming software.
Using Atmel Atmega328P-AU MCU, Support ISP download; Support USB download and Power.
LAFVIN Nano CH340 controller is a compact board similar to the R3 board, smaller and breadboard-friendly than Diecimila.

SaleRank No. #8

2-Pack Nano V3.0 Board, Aideepen Nano V3.0 ATmega328P-MU 5V 16M CH-340 chip Compatible with Arduino IDE (Without Cable)

【Nano V3.0】Support ISP download,8 Simulation input port: A0 ~ A7,14 digital input/output ports: TX, RX, D2 ~ D13.
【CH-340 chip】Replace FT2322,greatly reduces the cost of the module.
【MINI USB port】MINI USB port no welding needed.
【Power】Support USB download and Power,Support for external 5V ~ 12V DC power supply.
【Why choose us】You can use it with our development board ASIN B0788MLRLK,let your project more convenient and efficient.Aideepen specializes in various electronic components,please feel free to contact us.

SaleRank No. #9

DORHEA for Nano V3.0 ATmega328P Nano Board CH340 5V 16M Microcontroller Board, Compatible with Arduino Electronics Development Board Nano 328P Nano 3.0

The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
The nano has 8 analog inputs,each of which provide 10 bits of resolution.By default they measure from ground to 5 volts, though is it possible to change the upper end of their range using the analogReference function. Analog pins 6 and 7 cannot be used as digital pins. Additionally, some pins have specialized functionality
It is a smallest, complete and breadboard friendly board. It has everything that for Arduino has (electrically) with more analog input pins and on board +5V AREF jumper.
This board is using the chips ATmega328P and CH340, not FT232 as official for Arduino.
More Breadboard Space:Nano's got the breadboard-ability of the Mini USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND ）on one top, power and ground on the other.

Rank No. #10

Mini Nano V3.0 ATmega328P 5V 16M Microcontroller Board w/USB Cable for Ar duino IDE

Original ATmega328P CH340 chip is used. Improved new version CH340G Replace FT232RL
LAFVIN Nano V3.0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system.
Works the same as original Nano, runs perfectly on programming software.
Using Atmel Atmega328P-AU MCU, Support ISP download; Support USB download and Power.
LAFVIN Nano CH340 controller is a compact board similar to the R3 board, smaller and breadboard-friendly than Diecimila.

Rank No. #11

ACEIRMC for Arduino Nano V3.0, Nano Board CH340/ATmega328P Without USB Cable, Compatible with Arduino Nano V3.0 ( Without Cable) (3 Pack)

Nano's got the breadboard-ability of the compatible for arduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
The Nano is using the chips ATmega328P and CH340, not FT232 as official compatible for Arduino, so pls. use the driver from above link.
It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper.
Package Include : 3 X Nano Board

Rank No. #12

TISEKER Mini Nano V3.0 ATmega328P Microcontroller Board with USB Cable for Arduino

The Nano for arduino can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
The nano has 8 analog inputs,each of which provide 10 bits of resolution.By default they measure from ground to 5 volts, though is it possible to change the upper end of their range using the analogReference function. Analog pins 6 and 7 cannot be used as digital pins, some pins have specialized functionality.
Small Arduino UNO Board:It is a smallest, complete and breadboard friendly board. It has everything that Arduino/Genuino UNO has (electrically) with more analog input pins and onboard +5V AREF jumper.More Breadboard Space:Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
Specification:The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.Usage: The Nano is 100% compatible with Arduino, with the same chips ATmega328P and CH340 with the official version.
This board is using the chips ATmega328P and CH340, Support ISP download; Support USB download and Power. If you need an older driver, pls get it from GitHub—please read the link that follows immediate. http://sparks.gogo.co.nz/ch340.html; More detals on how to use it please refer to: http://audiodiwhy.blogspot.com/2018/05/one-cheap-arduino-nano-clone-o-plus-one.html

Rank No. #13

ideaSpark Nano V3.0,Nano Board ATmega328P CH340 Micro Controller Built-in 0.91'' OLED Display 128x32 SSD1306 IIC I2C Completely Compatible with Arduino Nano V3.0

Completely compatible with arduino Nano Arduino IDE.The Nano V3 0.91'' OLED Board is a small, complete, and breadboard-friendly board based on the ATmega328P. It offers the same connectivity and specs of the UNO board in a smaller form factor.Works the same as original Nano, runs perfectly on programming software,and fully compatible with Windows, Mac and Linux operating system
Nano board integrates a 0.91 inch OLED display,get rid of annoying wires and breadboards.Display has SSD1306 driver,128X32 high-resolution,no backlight,is I2C or SPI compatible.The Board using I2C connecting to OLED Display(I2C: A4 (SDA) and A5 (SCL))
Original ATmega328P chip is used. New version driver CH340 Replace FT232RL
How to make OLED work: Step 1: Google or Bing to search keywords:"CH340 Driver" to install CH340 driver.Step 2: Refer to the Third picture, set up IDE, Upload the Sample Code shown in the image to the board
It works with a Mini-B USB cable,7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source

SaleRank No. #14

HiLetgo 3pcs Nano V3.0 ATmega328P CH340G 5V 16M Mini USB Micro Controller Board Development Board with PIN Headers Pin Unsoldered

Using Atmel Atmega328P-AU MCU, Support ISP download,using the same chips ATmega328P and CH340 with the official version.
Support USB download and Power.
Support for external 5V~12V DC power supply, Support power supply by 9V battery.
Nano V3.0 ATMEGA328P improved version with 3pcs pin headers. No welding needed.

Rank No. #15

Mini Nano V3.0 ATmega328P Microcontroller Board w/USB Cable for Arduino

Attention:before running the procedure, pls install the corresponding computer system driver. Drivers: directly from the chip manufacturer: WCH 340 product home page: http://www.wch.cn/product/CH340.html; http://www.wch.cn/download/CH341SER_LINUX_ZIP.html (linux should operate fine without the driver); http://www.wch.cn/download/CH341SER_MAC_ZIP.html; http://www.wch-ic.com/download/list.asp?id=127 (windows); http://bit.ly/2pMF4in.
If you need an older driver, pls get it from GitHub—please read the link that follows immediate. http://sparks.gogo.co.nz/ch340.html; More detals on how to use it please refer to: http://audiodiwhy.blogspot.com/2018/05/one-cheap-arduino-nano-clone-o-plus-one.html
Small Arduino UNO Board:It is a smallest, complete and breadboard friendly board. It has everything that Arduino/Genuino UNO has (electrically) with more analog input pins and onboard +5V AREF jumper.More Breadboard Space:Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
Specification:The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.Usage: The Nano is 100% compatible with Arduino, with the same chips ATmega328P and CH340 with the official version.
Usage:1. download arduino IDE, (download address: http://arduino.cc/en/Main/Software; 2. Download the USB chip driver, (download address :http://wch.cn/downloads.php?name=pro&proid=65); 3. Plug in the NANO development board, the driver will be automatically installed; 4. Open the IDE of arduino, select NANO for the board, and COM3 for the serial port, and click Download; 5. It is best to select the routine programme that comes with the arduino, burn it in.

Rank No. #16

DWEII 2PCS for Nano V3.0 ATMEGA328P Module CH340C Chip 5V 16MHz Mini USB Micro-Controller Board with 2PCS Mini USB Cable Compatible with Arduino

Using Atmel Atmega328P-AU MCU, Support ISP download; Support USB download and Power.
it can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
It is a smallest, complete and breadboard friendly board. It has with more analog input pins and on board +5V AREF jumper, compatible with Windows, Mac and Linux operating system.
This board is using the chips ATmega328P and CH340, ,Support ISP download; Support USB download and Power.
The nano has 8 analog inputs,each of which provide 10 bits of resolution.By default they measure from ground to 5 volts, though is it possible to change the upper end of their range using the analogReference function. Analog pins 6 and 7 cannot be used as digital pins, some pins have specialized functionality.

SaleRank No. #17

Weewooday 6 Pieces Nano Board V3.0 ATmega328P Without Cable Compatible with Arduino Nano V3.0 with Pin Headers Pin Unsoldered

What you will get: the package included 6 pieces of nano board V3.0 ATmega328P, each nano V3.0 ATMEGA328P improved version with 3 pieces of pin headers unsoldered
ATmega328P chips: using Atmega328P-AU MCU, support ISP download, using the same chips ATmega328P and CH340 with the official version
Mini nano board: this is a portable, complete, and breadboard friendly board; It has everything that compatible with Arduino has (electrically) with more analog input pins and onboard +5V AREF jumper
Input and output: each of the 14 digital pins on the Nano can be applied as an input or output; Some pins have special functions
USB connection: the Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27); The power source is automatically selected to the high voltage source

Rank No. #18

OSOYOO 3pcs Nano Atmega328P Module CH340 5V/16M USB-C Micro-Controller Board for Arduino Nano V3.0

OSOYOO Nano board is tiny and breadboard friendly microcontrollers based on the CH340/ATmega328. It works the same as original Nano and is very cost-effective for beginners to get started.
Using Atmel Atmega328P-AU as MCU, Support ISP download; Support USB download and Power.Compatible with Arduino Nano V3.0 fully compatible with Windows, Mac and Linux operating system.
The OSOYOO Nano can be powered via USB-C connection,included USB-C to USB-A cable and USB-C to USB-C cable. 6-12V unregulated external power supply , or 5V regulated external power supply.The Nano is automatically sense and switch to the higher potential source of power, there is no need for the power select jumper.
OSOYOO Nano has 14 digital I/O pins (6 of which can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a power USB-C jack, an ICSP port and a reset button.
The OSOYOO Nano has a variety of facilities for communicating with a PC or other microcontrollers, and fully compatible with Windows, Mac and Linux operating system.This board especially is breadboard friendly and is very easy to handle the connections.

Rank No. #19

AITIAO 4Pcs for Nano V3.0 ATmega328P Module CH340G 5V 16M Mini USB Micro Controller Development Board with PIN Headers(Without USB Cable)

Original ATmega328P CH340 chip is used. Improved new version CH340G Replace FT232RL.Support ISP download; Support USB download and Power.Original ATmega328P CH340 chip is used. Improved new version CH340G Replace FT232RL.Support ISP download; Support USB download and Power.
for Nano V3.0 ATMEGA328P Improved version with 3pcs pin headers (2pcs 15pin headers +1pcs 6pin headers).
It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper.
The module got the breadboard-ability of the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
The for Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.

SaleRank No. #20

MakerFocus Mini Nano V3.0 ATmega328P Microcontroller Board w/USB Cable For Ar duino

Matters Need Attention: Before running the procedure, pls install the corresponding computer system driver. Drivers: directly from the chip manufacturer: WCH 340 product home page: http://www.wch.cn/product/CH340.html; http://www.wch.cn/download/CH341SER_LINUX_ZIP.html (linux should operate fine without the driver); http://www.wch.cn/download/CH341SER_MAC_ZIP.html(MAC); https://www.wch.cn/downloads/COMTransmit_ZIP.html(windows)
NOTE: If you want it to work on a Mac, please install the diver from this: https://drive.google.com/drive/folders/1phezjJtQW0vav34RoivsAzjF0ugmqjgn?usp=sharing; If you want it to work under Windows 10, You must turn off automatic updates before you install the driver, please install the diver from this: https://drive.google.com/drive/folders/1tl6sVGVduyH1JHfaYdMqeMGKdo-rg3im?usp=sharing
If you need an older driver, pls get it from GitHub—please read the link that follows immediate. http://sparks.gogo.co.nz/ch340.html; More details on how to use it please refer to: http://audiodiwhy.blogspot.com/2018/05/one-cheap-arduino-nano-clone-o-plus-one.html
Small Ar duino UNO Board: It is a smallest, complete and breadboard friendly board. It has everything that Ar duino/Genuino UNO has (electrically) with more analog input pins and onboard +5V AREF jumper; More Breadboard Space: Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)
Specification: The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source. Usage: The Nano is 100% compatible with Ar duino, with the same chips ATmega328P and CH340 with the official version

Last update on 2023-08-16 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Elegoo Nano Board Ch340 Atmega328P?

Do you get stressed out thinking about shopping for a great Elegoo Nano Board Ch340 Atmega328P? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Elegoo Nano Board Ch340 Atmega328P, which is why we have assembled a comprehensive list of the greatest Elegoo Nano Board Ch340 Atmega328P available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Elegoo Nano Board Ch340 Atmega328P that you consider buying. Your questions might include the following:

Is it worth buying an Elegoo Nano Board Ch340 Atmega328P?
What benefits are there with buying an Elegoo Nano Board Ch340 Atmega328P?
What factors deserve consideration when shopping for an effective Elegoo Nano Board Ch340 Atmega328P?
Why is it crucial to invest in any Elegoo Nano Board Ch340 Atmega328P, much less the best one?
Which Elegoo Nano Board Ch340 Atmega328P are good in the current market?
Where can you find information like this about Elegoo Nano Board Ch340 Atmega328P?

We’re convinced that you likely have far more questions than just these regarding Elegoo Nano Board Ch340 Atmega328P, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Elegoo Nano Board Ch340 Atmega328P, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Elegoo Nano Board Ch340 Atmega328P. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an Elegoo Nano Board Ch340 Atmega328P buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Elegoo Nano Board Ch340 Atmega328P currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Elegoo Nano Board Ch340 Atmega328P has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Elegoo Nano Board Ch340 Atmega328P?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Elegoo Nano Board Ch340 Atmega328P.
Customer Ratings: Number ratings grade Elegoo Nano Board Ch340 Atmega328P objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Elegoo Nano Board Ch340 Atmega328P.
Product Quality: You don’t always get what you pay for with an Elegoo Nano Board Ch340 Atmega328P, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Elegoo Nano Board Ch340 Atmega328P is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining Elegoo Nano Board Ch340 Atmega328P information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Elegoo Nano Board Ch340 Atmega328P is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: Is the nano compatible with the ATmega328P and CH340 chips?

A: Usage: The Nano is 100% compatible with board, with the same chips ATmega328P and CH340 with the official version [A3] The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27).

Q: What is the elegoo nano board?

A: The Elegoo Nano Board is a small, complete, and breadboard-friendly board based on the ATmega328P and it works with a mini USB cable. The Elegoo Nano can be powered via USB connection, 6-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27).

Q: What is the nano CH340 R3 board?

A: The Nano CH340 R3 board is similar to the genunine Arduino Nano board, described on the original Arduino website here . The board uses same type of Mini-B USB connector, same side connectors and 6-pin SPI connector, as well as the Atmel ATmega328P microcontroller in the 32-TQFP package.

Q: Does the elegoo nano V3 have a USB port?

A: It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one. You could download the driver of Elegoo Nano V3.0 from ELEGOO official websit. We dont have USB cables in this kit and you will need to buy a mini USB cable to use this NANO board.