The Best Fuel Cell Filler Neck of 2023 – Reviewed and Top Rated
2,476 Reviews Scanned
- ▶️ 1.5" ID Neck Diameter
- ▶️ Raises Filler Neck 2.75" from Base
- ▶️ Fits Fuel Cells using 12-Bolt Base
- ▶️ 45 Degree Neck Angle
- ▶️ Steel Base / Aluminum Cap
- 1.5" ID Neck Diameter , Powder Coated Finish
- Raises Filler Neck 2.75" from Base
- Steel Base , Aluminum Cap
- Fits Fuel Cells using 12-Bolt Base & 5-3/8 Bolt Spacing
- 45 Degree Neck Angle
- 1. 5" ID Neck Diameter
- Raises Filler Neck 2. 75" from Base
- Fits Fuel Cells using 12-Bolt Base
- 45 Degree Neck Angle
- Steel Base / Aluminum Cap
- Package Dimension : 26.162 cms L x 21.336 cms W x 17.018 cms H
- Country of Origin: UNITED STATES
- Fit type: Vehicle Specific
- Package Weight: 2.3 pounds
- 12 mounting holes on a 5.38" bolt circle
- Includes mount ring, bolts, and gasket
- Uses 2" I.D. filler hose
- Laser-etched center mark for fuel level sender
- Aluminum Material
- Flange will bolt to your fuel cell to permit attachment of a 1.5" I.D. filler hose
- The fill tube comes off of the flange at a 90-degree angle
- Features a laser-etched center mark which allows you to easily locate and attach a fuel level sending unit
- Manufactured from top-quality materials and are available in two sizes to best suit your application
- There are a total of 12 mounting holes on a 5.38" bolt circle
- 1.5" ID Neck Diameter, Raises Filler Neck 2.75" from Base, 45 Degree Neck Angle
- Fits Fuel Cells using 12-Bolt Base
- Powder Coated Finish, Steel Base, Aluminum Cap.
- Designed for those who need to fuel their vehicles as fast as possible.
- Fits Fuel Cells using 12-Bolt Base & 4-1/2 Bolt Spacing Steel Base
- Reinforced Fuel Filler Hose: This is good quality reinforced hose with the nylon cording inside for added strength;Features a high-quality nitrile tube
- Proper Fuel Filler Hose:Temperature Range: -40 Deg. F to +212 Deg. F (-40 Deg. C to +100 Deg. C);Up to maximum concentrations allowed by the EPA
- Plenty Long Enough:Provided the length required for the extension from the tank to the filler cap;15 7/8" Long x 1 1/2" Inside diameter fuel filler neck hose(measure your old item to assist with the new one)
- Easy to Install:You can easy cut this gas line fuel filler neck hose to fit your purpose(Very flexible and easy to cut with box knife)
- Applicable :Suitable for use with fuel line, fuel hose, fuel filler neck vent hose
- Our Fuel Cell Fast Filler Neck are Designed for those who need to fuel their vehicles as fast as possible, these fast filler neck are made from 6061-T6 lightweight aluminum with hard anodized finish. The 12 bolt flange simply replace our the flush style mounting caps, also it's may fit with most of the fuel cells on the market.Perfect for build your own fuel cell tank, replacing missing or damaged mounting caps etc.
- Fuel Cell Filler Neck Material: 6061-T6 Aluminum Alloy; Fuel Cell Filler Neck Cap Material: 6061-T6 Aluminum Alloy
- Fuel Cell Filler 12 Bolt Flange Material: 6061-T6 Aluminum Alloy; Fuel Cell Filler 12 Bolt Flange Base: Chrome Steel; Fuel Cell Filler 12 Bolt Flange OD: 5.5" (139.5mm)
- Fuel Cell Filler Neck OD: 60mm; Fuel Cell Filler Neck ID: 54mm; Fuel Cell Filler Neck Type: Straight; Height Of Fuel Cell Filler Neck Base to Top: 74mm
- Color: Black Anodized; Kit includes: Nuts, Washers and cork gasket, Bolts everything as the picture shown.
- The outer diameter of the FUEL Deck Fill Tank tube is 1-1/2” (38.8mm),ideal for use with 1-1/2” I.D. fill hose.The outside diameter of the flange is 2.87 inch(73mm). Cap diameter 3.27 inch /83mm.The center of the screw holes is 0.3 inch(8 mm) from the outer edge of the flange.
- FUEL Deck Fill/Filler is cast from marine grade stainless steel 316, the surface is hand mirror polished,the surface is smooth and beautiful.Recess flush to deck for contemporary look.
- Convenient, keyless design - lift built-in tab on cap and turn to open or close.The product is simple and convenient to use.The lid is attached to the body with a stainless steel chain to prevent the lid from being lost
- FUEL Deck Fill/Filler Silica sol precision casting, integrated casting, each product undergoes 3 quality inspection procedures, product size quality inspection, product salt spray test, product infrared spectrum test, to ensure excellent quality.With rubber gasket, it can be a better fit between the deck fill and the deck .
- Package Includes:1 piece FUEL Deck Filler,3 pieces screws,1 piece rubber Spare O-Ring,1 piece spare Rubber Gasket.
- Fuel Cell Filler Neck Material: 6061-T6 Aluminum Alloy; Fuel Cell Filler Neck Cap Material: 6061-T6 Aluminum Alloy; Fuel Cell Filler 12 Bolt Flange Material: 6061-T6 Aluminum Alloy
- Fuel Cell Filler 12 Bolt Flange OD: 161.5mm
- Fuel Cell Filler Neck OD: 45mm; Fuel Cell Filler Neck ID: 37mm
- Fuel Cell Filler Neck Type: 45 Degree; Height Of Fuel Cell Filler Neck Base to Top: 67mm
- Color: Silver
- 【Package Included】1 x Black Fuel Tank Cap,1 x Silver Flange Cap,1 x Seal O-Ring
- 【Features】Overflow coolant tank caps are designed to fit OEM coolant tanks with a threaded fill neck Complete replacement caps are machined from billet aluminum, with a polished surface comes with pressure cap.
- 【Application】 The weld on filler neck and cap is suitable for oil tanks, fuel tanks, water tanks, dry fuel tanks.
- 【Complete replacement caps are machined from Cap Material】6061-T6 Aluminum alloy, with a polished surface comes with pressure cap.Scalloped design, making them the perfect complement to any engine bay.A clear anodized finish adds shine and durability
- 【Cap OD Size】1.5" /38mm, 2"/50mm, 2.5"/63mm,3"/76.2mm,4"/101.6mm.(Please buy according to your needs and the size in the picture).
- Designed for those who need to fuel their vehicles as fast as possible, these fast fill hose valves from PCE are just what you need. Made from lightweight aluminum, the valves simply replace the flush or D-ring style 12-bolt mounting caps found on many of today's popular aftermarket fuel cells.
- 504 Fuel Cell Filler Valve
- Speedmaster creates unique & distinctive DNA items inspired by the blend of old and new technology. Its empowered work forced drives innovation not only in the products it sells but with the way it goes about doing it.
- TRACK PROVEN - Surviving the longevity of road, race and recreation is mandatory for all "Track Proven" products, Bringing you closer to product perfection.
- 12 Month Limited Worldwide Warranty
- Material: made of high quality CNC 6061-T6 Billet Aluminum.
- Fuel Cell Cap Type: Screw-On Mounting Plate Type: 12 Bolt Holes
- A direct replacement for any fuel cells with a 12-bolt, 5.343” bolt holes
- Come with Utilize a tightness O-ring seal, easy to grip cap.
- Application: Universal. (Fit some JAZ, Harwood or RCI Fuel Cells.)
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
- Unit is dual coated for enhanced corrosion protection
- Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
- Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
- Tested with OE fuel cap to prevent evaporative emission and check engine light failure
- Universal Fit
- 4.88" overall diameter
- 6 x 4.36" bolt pattern
- Aluminum construction
- Mounting ring, bolts, and gaskets are included in kit
- Complete your fuel cell installation with this all-in-one filler neck/fuel cap kit.
- Kit Includes: (1) Fuel Cell Filler Neck - 4", (1) Twist-On Fuel Cell Cap
- This 4" diameter gas filler neck kit can be used as a replacement unit or for your custom fuel cell. Kit includes a mounting ring, rubber gasket, and bolts.
- Replacement fuel cell cap fits 4" necks like those on our Steel Can Fuel Cells and Polyethylene Fuel Cells.
- Application: The weld on filler neck and cap is suitable for oil tanks, fuel tanks, water tanks, dry fuel tanks.
- Material: Aluminum Alloy
- The weld on filler neck and cap features an O-Ring on the cap and compliant with aviation hose coupling requirements.
- Features a smooth finished design, the weld on filler neck and cap is durable.
- Neck Thread Size: M58 x 2
- Manufactured with high quality rubber to ensure it maintains its dimensional characteristics even in extreme cold/hot weather variations seen in the North American market
- Original Equipment (OE) design to ensure exact fit, form and function
- Fit tested to ensure ease of installation for the application it was intended for
- Part is tested to ensure it meets the same requirements as OE specifications
- Compatible with all fuel types it's designed for
- Unit is designed to original equipment (OE) fit, form and function requirements
- Fit tested on vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
- Dual coated for enhanced corrosion protection
- Unit is leak tested after production to ensure product in free from fuel and/or evaporative leaks
- Tested with original equipment (OE) fuel cap to prevent EVAP and check engine light failure
Last update on 2023-09-08 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API
How Do You Buy The Best Fuel Cell Filler Neck?
Do you get stressed out thinking about shopping for a great Fuel Cell Filler Neck? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Fuel Cell Filler Neck, which is why we have assembled a comprehensive list of the greatest Fuel Cell Filler Neck available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Fuel Cell Filler Neck that you consider buying. Your questions might include the following:
- Is it worth buying an Fuel Cell Filler Neck?
- What benefits are there with buying an Fuel Cell Filler Neck?
- What factors deserve consideration when shopping for an effective Fuel Cell Filler Neck?
- Why is it crucial to invest in any Fuel Cell Filler Neck, much less the best one?
- Which Fuel Cell Filler Neck are good in the current market?
- Where can you find information like this about Fuel Cell Filler Neck?
We’re convinced that you likely have far more questions than just these regarding Fuel Cell Filler Neck, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Fuel Cell Filler Neck, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Fuel Cell Filler Neck. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Fuel Cell Filler Neck buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Fuel Cell Filler Neck currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Fuel Cell Filler Neck has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Fuel Cell Filler Neck?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Fuel Cell Filler Neck.
- Customer Ratings: Number ratings grade Fuel Cell Filler Neck objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Fuel Cell Filler Neck.
- Product Quality: You don’t always get what you pay for with an Fuel Cell Filler Neck, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Fuel Cell Filler Neck is should be an indication of how long it will work out for you.
We always remember that maintaining Fuel Cell Filler Neck information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Fuel Cell Filler Neck is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
Related Post:
- Ford Mustang Fuel Tank Filler Neck Seal
- Flush Mount Fuel Filler Neck And Cap
- Flush Mount Vented Fuel Filler Neck And Cap
- Fuel Filler Neck Hose
- 1.75 Inline Radiator Filler Neck
- 1.75 Inline Radiator Filler Neck
- Filler Neck Replacement Cost
- flexible fuel filler hose
- Ford Capless Fuel Filler Funnel
- Ford Ranger Fuel Filler Hose Replacement