Contents

20 Best Gocontrol Usb of 2023 – Romance University

After hours researching and comparing all models on the market, Romance University finds out the Best Gocontrol Usb of 2023. Check our ranking below.

2,159 Reviews Scanned

Rank No. #1

GoControl CECOMINOD016164 HUSBZB-1 USB Hub

Provides interface between PC and Z-Wave/Zigbee network
Plugs into a standard USB port on the host device
Works with third-party home automation software
Appears as two (2) serial ports
Z-Wave Plus certified for wide compatibility

Rank No. #2

GoControl CECOMINOD016164 HUSBZB-1 USB Hub

The Model HUSBZB-1 is a USB stick that houses both a Z-Wave and Zigbee radio. Designed for OEMs that want to provide dual functionality when being used with a host device.
HubZ is a USB v2.0 full speed low power Z-Wave and ZigBee adapter in a USB Stick form factor. When plugged into computer or similar host device, it appears as two (2) serial ports. This device requires an application from a third party to operate. When power is supplied through the USB port, a blue LED on the front will be illuminated. Once the user application is running, the LED may be used to display various types of status information.
HubZ is an independently controlled Z-Wave static controller that requires an application from a third party to operate. The application will control such functions as Inclusion, Exclusion and Replication.
This product can be included and operated in any Z-Wave network with other Z-Wave certifi ed devices from other manufacturers. All non-battery operated nodes within the network will act as repeaters, regardless of vendor, to increase reliability of the network.
USB Z-Wave & ZigBee Adapter

SaleRank No. #3

Smart Thermostat

Works with Alexa for voice control (hub required, Alexa device and hub sold separately).
Z-Wave compatible - Ver. 4.5.5
Supports Z-wave Flirs Functionality. The GC-TBZ48 works with most contemporary Central HVAC systems whether standard or heat pump which makes this thermostat a great solution for all retrofit or new construction needs. Wall mount or mounts on single-gang junction box
Works On Standard Hvac Systems With 2-stage Heat & 2-stage Cool. USB firmware upgrade ability
Works On Heat Pump Hvac Systems With 3-stage Heat & 2-stage Cool

Rank No. #4

Nortek GoControl WD500Z5-1: Z-Wave Wall Dimmer Switch 500W 908.42 MHz 120VAC 15A

The WD500Z5-1 Wall Mounted Dimmer allows remote ON/OFF control and dimming of connected lights. The Z-Wave Wall Mount Dimmer is easily wired in place of a standard wall dimmer. This device requires a Neutral connection. The Wall Mounted Dimmer integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range).
Replaceable Trim Ring The WD500Z5-1 Wall Mount Switch has a field replaceable trim ring - the color of the device can be altered with the Trim Ring Kit model in black, brown, almond and ivory. Auto-Sense: Unique to Nortek Security & Control, the Auto-Sense feature allows for local lamp activation independent of the Z-Wave controller status.
Maximum Load: 500 Watts for control of permanently installed lighting fixtures only (Not for control of receptacles) Signal (Frequency): 908.42 MHz Range: Up to 100 feet line of sight between the wireless controller and/or the closest Z-Wave device Input: 120v 15A 60Hz
Network wide inclusion Scene: Command class Security beaming Requires a Neutral Auto-Sense feature built-in Replaceable trim ring design
Note to Installers: When installing a Z-Wave 3-Way Light setup utilizing Nortek Security & Control products, you will need a Load Bearing switch (WS15Z-1, WD500Z-1 or WD1000Z-1) and a non-load bearing WT00Z-1. Multiple WT00Z-1 switches can be utilized to control multiple Load Bearing devices. Please refer to the linked Technical Bulletin on Z-Wave 3-Way Light Switch Setup for more information.

Rank No. #5

Zooz 800 Series Z-Wave Long Range S2 USB Stick ZST39 LR, Great for DIY Smart Home (Use with Home Assistant or HomeSeer Software)

READ BEFORE YOU BUY: The Z-Wave stick is for advanced users only, NOT for beginners. You must be comfortable with programming and have expert computer and Z-Wave knowledge to use this device. NVM back-up from 500 or 700 series Z-Wave sticks will brick the device. Do NOT apply NVM backups or firmware updates published outside of the Zooz support portal to avoid bricking the stick and voiding its warranty.
NEW 800 SERIES Z-WAVE LONG RANGE: Take advantage of the latest wireless innovation with Z-Wave Long Range that extends your network coverage up to a mile. NOTE: Your home automation software needs to support the Long Range implementation on the interface side as well as the end Z-Wave device you add to the network for the Long Range functionality to be fully unlocked.
WHAT YOU NEED: This 800 Series Long Range Stick adds Z-Wave Plus and Z-Wave Long Range capability to your DIY smart home set-up. You'll need a dedicated computer (PC, laptop, or Raspberry Pi, sold separately) and home automation software of your choice (not included) to complete the system.
ADVANCED Z-WAVE: Works great with the most popular software like Home Assitant (with JS) and HomeSeer. Supports OTA firmware updates and and all of the latest Z-Wave library commands.

Rank No. #6

GoControl WO15Z-1 Z-Wave Single Wall Outlet, White

Uses Z-Wave's Scene Command Class. The WO15Z-1 Outlet integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range).
Easily replace existing standard wall outlets to add a Z-Wave controlled outlet. Compatible with any Z-Wave certified gateway
Outlets include a white decorative switch plate and are tamper-resistant in compliance with NEC 2008
Linear Z-Wave products provide up to 100 feet range between the wireless controller and/or the closest Z-Wave device
Linear has provided best-in-class home & business control solutions for over 50 years and is a leading worldwide manufacturer of Z-Wave products

SaleRank No. #7

SONOFF Zigbee 3.0 USB Dongle Plus Gateway, Universal Zigbee USB Gateway with Antenna for Home Assistant, IoBroker, Wireless Zigbee 3.0 USB Adapter(1 Pack)

Pre-flashed with Z-Stack 3.x.0 coordinator firmware
Can use ZHA in Home Assistant or use Zigbee2MQTT
Base on TI CC2652P + CP2102N
+20dBm output gain
SMA interface external antenna,Aluminum housing effectively reduces signal interference from peripherals

Rank No. #8

GoControl GD00Z-8-GC: Z-Wave Plus S2 Security, Black, Small

Note: Measure your door's backset, cross bore and thickness to ensure you find the right fit

Rank No. #9

SONOFF Zigbee 3.0 USB Dongle Plus-E Gateway, Universal Zigbee USB Gateway with Antenna for Home Assistant, Open HAB, Zigbee2MQTT etc, Wireless Zigbee 3.0 USB Adapter

Pre-flashed with Zigbee coordinator firmware based on EZNet 6.10.3 out of box
Support smart home platforms like Home Assistant, openHAB, Zigbee2MQTT and so on
Based on EFR32MG21
+20dBm output gain
Aluminum housing effectively reduces signal interference from peripherals

Rank No. #10

GOCONTROL RA45130 Z-Wave Wall Switch, White

A Must Buy Item.
Built To Last.
Great Item To Give as A Gift.

Rank No. #11

Gocontrol ZWAVE SNGL WALL OTLT

Take control of your home. Use this switch to wirelessly control and schedule Small appliances and lights in your home from anywhere using a Z-Wave certified gateway
Tamper resistant per nes standards
Energy monitoring reports energy usage (feature must be supported by Z-Wave hub)
Works with the WT00Z5-1 Wireless 3-Way switch.
Total Outlet: 2

Rank No. #12

UpBright 14V AC/DC Adapter Compatible with 2GIG 2GIG-TS1 2GIG-TS1-E Wireless Touch Screen Keypad Security Go!Control Panel 2GIG-GCX 2GIG-CP51-345E CPI inTouch 14VDC 1.7A Power Supply Charger with Wire

World Wide Input Voltage 100-240VAC 50/60Hz. OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP: Short Circuit output Protection). Tested Units. In Great Working Condition. UpBright 30 days money back guarantee. 1 full year service warranty.
UpBright New Global 14V AC / DC Adapter Compatible with 2GIG 2GIG-TS1 2GIG-TS1-E Wireless Touch Screen Keypad Residential Security Keypad Go!Control Panel with Wire 14.0V 1700mA 14VDC 1.7A DC14V 1.7 A 14.0VDC 1700 mA 14 V 14.0 VDC Switching Power Supply Cord Cable PS Battery Charger Mains PSU (with wire for easy DIY connection)
Compatible with: 2GIG Technologies Model: 2GIG-GCX 2GIG-CP51-345E Go! Control Panel CPI inTouch

Rank No. #13

Phoscon ConBee II - Universal Zigbee 3.0 USB Gateway, incl. deCONZ & Phoscon App, Home Automation, Home Assistant, ioBroker, Zigbee2MQTT

Universal Zigbee USB gateway integrates Zigbee products across manufacturers
Local solution without cloud, no registration or Internet access needed
Strong signal range via power-amplifier
Supported operating systems: Windows 7 / 10, Ubuntu Linux (AMD64), Raspbian and Docker
For PC, Notebook, Raspberry Pi or Mini-PC

Rank No. #14

QuickStick Combo, HUSBZB-1, by Nortek, Cert ID: ZC10-15090013

A USB stick that houses both a Z-Wave and Zigbee radio.
Z-Wave Certification ID: ZC10-15090013
Frequency Region: U.S./Canada/Mexico, Z-Wave Library Version: 6.51.06
Device Categories: Controllers

Rank No. #15

Blomiky 2 Pack 7.4V 1500mAh Li-ion Rechargeable Battery SM-2P Plug with Deans T Adapter and Charger Cable for H101 H103 H105 RC Boat RC Trucks H101 Battery & T 2

Battery SM-2P connector plug, bonus SM-2P to Deans T plug adapter cable, Battery Size: 70*37*19mm /2.77*1.44*0.73 inch(L*W*H) . battery Weight: 95g/3.35oz. High quality material help you get more playing time.
Battery Voltage: 7.4V; Cell: 2S ; Capacity: at least 1500mAh; discharge rate: 15C ; Charger plug: JST-XH 3 pin Connector. 7.4V 1500mAh Li-ion Battery SM-2P Plug for old version TKKJ Skytech H101 H105 H103 and INTEY H105 Remote control RC Boat RC Car RC helicopter RC Vehicle Buggy Trucks.
SM-2P deans T plug Adapter cable can help the 1500mAH 2S SM-2P battery used in many RC Trucks, RC Vehicles or Remote control Cars.,which use deans T plug. make sure battery size suitable too. Red cable is positive polar, black cable is negative polar, make sure red cable are in same line, and black cable in same line too.
Battery weight: 95grams. Advanced 7.4V 2-Cell 15C 1500mah rechargeable lithium-ion battery for RC car boat and any devices that voltage 7.4V, connector plug SM-2P or Deans T plug, dimensions and olug can fit your device..
USB Cable built-in protection over-charged and over-heated circuit, USB charger cable input: DC 5V, output current: 7.4V 1000mA. USB charging cable have IC circuit protection. When charging, green light flashing; green light stop flashing after full charged.,red cable keep solid.

Rank No. #16

Aeotec Smart Home Hub, Works as a SmartThings Hub, Z-Wave, Zigbee, Matter Gateway, Compatible with Alexa, Google Assistant, WiFi

Easiest way to make your home a smart home: Wirelessly connect and control a huge range of smart devices - over 5,000 are available from dozens of brands - including voice assistants, lights & switches, speakers, cameras, sensors and more
Automate connected devices: Any device you connect can be included into automations which can be intelligently managed. Now many automations work locally even when internet service is disrupted.
Control via App or Voice: Monitor and control connected devices, and run automations, using the Samsung SmartThings app on Android, iOS, and iPadOS, or voice user interfaces Amazon Alexa and Google Assistant
Requires internet access for set-up: Ethernet connection recommended, but Wi-Fi is also available. Download the SmartThings app to your phone or tablet to setup.
Compatibility: Certified to work with Google, Alexa, SmartThings, Matter, Wi-Fi, Z-Wave Plus, and ZigBee protocols. Not compatible outside of North America.

Rank No. #17

Zooz Z-Wave Plus S2 MultiRelay ZEN16 VER. 2.0 for Garage Doors, Sprinklers, Gas Fireplace; 3 Dry Contact Relays (15A, 15A, 20A); 12-24 V AC/DC or USB C Power; Signal Repeater; Hub Required

3 RELAYS IN 1: Control 3 dry contact relays independently with one MultiRelay. Connect an optional wall switch for manual on/off control (dry contact only, NO voltage on the input side) or use your Z-Wave hub (required, sold separately) for wireless control and automation. Your smart speaker is NOT a Z-Wave hub. Does NOT fully work with Wink or Z-Wave alarm panels like Ring, Vivint, or Alarm.com (R1 control only). Custom edge driver required for SmartThings, go to Zooz support page for details.
VERSATILE APPLICATIONS: Great to automate your garage door (up to 3 doors with just 1 MultiRelay!), commercial garage doors at your business, gas fireplace, sprinklers, doorbell, landscape lights, pool pump, whole house fan, and any 1-240 V device up to 20 A.
DIY INSTALLATION: Power it with a standard USB C cable and a 5V power supply (do NOT use USB chargers or Apple accessories) or 12-24 V AC/DC power source. Wall-mount ready. Power adapter or USB cable NOT included. Jumper wires NOT included. Do NOT power with 110 V! Do NOT apply Voltage to the input (switch) terminals!
RELIABLE Z-WAVE: Comes with the latest S2 security and a powerful Z-Wave Plus signal repeater to boost your network. Remembers and restores on/off status after power failure. Built-in auto-on and auto-off timer available if your hub supports advanced settings. The device is ETL certified and conforms with North American safety standards.
HUB COMPATIBILITY: This is an advanced Z-Wave device and it requires an open Z-Wave hub to display correctly. Works best with the Z-Box Hub. It was tested to work well with Hubitat, Home Assistant, and on SmartThings with a custom device driver (please go to Zooz support page for details). ADT Pulse, Vivint, Wink, and Ring all offer partial control (one relay or all at once instead of individual control for the relays).

Rank No. #18

THIRDREALITY ZigBee Smart Blind, Motorized Blackout Window Shades with Remote, Cordless Honeycomb Blinds, Automatic Height Setting, AA Batteries Powered, 32" W x 72" H Beige/White

MATERIAL: Third Reality Cellular Smart Blinds using honeycomb fabric coated with aluminum foil, it can blackout up to 100% and has better performance in security and privacy, noise reduction, waterproof, warm-keeping and energy-saving. Suitable for multiple applications like bedroom, living room, office, hotel, and etc.
EASY INSTALLATION: DIY friendly, hassle-free installation. We have attached a user guide and size guide, please read it to help you to choose the right size and install it. If there is any installation question, we are all here for you.
ZIGBEE 3.0 STANDARD: Directly connect with Echo Plus 1st&2nd Gen, Echo Studio, Echo 4th Gen, no third-party hub required. Smart Blinds also work with most popular ZigBee hubs, like SmartThings 2015/2018, Eero 6 & 6 Pro, Home Assistant (ZHA/ZigBee2MQTT), Hubitat Elevation, Homey Bridge, Homey Pro and THIRDREALITY Smart Hub.
SMART MOTOR: After connected with compatible hubs, you can remote control the motorized blinds wherever you are, or create routines, timers, schedules, groups as you like. With using Alexa, it is very convenient to control them with voice commands. We also provide offline control: IR remote (included in the box) and local button rail of the Smart Blind.
DC power supply and low power consumption: Powered by 4 AA batteries on the bottom rail, hassle-free battery replacement. 6 months battery life under typical usage conditions(opening / closing blinds once every day).

Rank No. #19

1016567R Nortek Nordyne Defrost Control Board Factory Original Part Replaces 624813

Rank No. #20

Zooz 700 Series Z-Wave Relay ZEN17 for Awnings, Garage Doors, Sprinklers, and More | 2 x NO-C-NC Relays (20A, 10A) | Signal Repeater | Hub Required (Compatible with Z-Box, SmartThings and Hubitat)

2 SMART OUTPUTS: Control 2 dry contact relays independently with one Z-Wave device. Choose from normally closed (10 A) and normally open (20 A) relays to automate almost any electrical device. Connect an optional wall switch for physical on/off control or use your Z-Wave hub (required, sold separately) for wireless control. Your smart speaker is NOT a Z-Wave hub. This product is NOT supported by Wink or Z-Wave alarm panels.
2 SMART INPUTS: Monitor 12-24 V or dry contact inputs separately from the dry contact outputs. Connect analog binary sensors to receive status updates in your Z-Wave hub from a connected door sensor, water sensor, HVAC system, or alarm panel. Use the inputs to trigger the outputs automatically.
AUTOMATE ANYTHING: Add Z-Wave connectivity to up / down DC motors in screens, motorized blinds, or awnings. Perfect to automate your garage door opener (use a single ZEN17 to control up to 2 garage doors independently), commercial gates, gas fireplace, sprinklers, doorbell, outdoor lighting, pool pump, whole house fan, and any 1-240 V device up to 20 A.
QUICK INSTALLATION: Power it with a 12-24 V AC/DC power source or a standard USB C cable (included) and a power supply (sold separately). Wall-mount ready. Jumper wires NOT included. Do NOT power with 110 V!
NEW 700 Z-WAVE: Enjoy better signal coverage and a stronger Z-Wave repeater for your mesh network with the latest 700 series chip. It comes with S2 authenticated security and SmartStart for easy pairing. Remembers and restores on/off status after power failure. Built-in auto-on and auto-off timer available if your hub supports advanced settings. The device is ETL certified and conforms with North American safety standards.

Last update on 2024-01-24 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Gocontrol Usb?

Do you get stressed out thinking about shopping for a great Gocontrol Usb? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Gocontrol Usb, which is why we have assembled a comprehensive list of the greatest Gocontrol Usb available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Gocontrol Usb that you consider buying. Your questions might include the following:

Is it worth buying an Gocontrol Usb?
What benefits are there with buying an Gocontrol Usb?
What factors deserve consideration when shopping for an effective Gocontrol Usb?
Why is it crucial to invest in any Gocontrol Usb, much less the best one?
Which Gocontrol Usb are good in the current market?
Where can you find information like this about Gocontrol Usb?

We’re convinced that you likely have far more questions than just these regarding Gocontrol Usb, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Gocontrol Usb, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Gocontrol Usb. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an Gocontrol Usb buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Gocontrol Usb currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Gocontrol Usb has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Gocontrol Usb?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Gocontrol Usb.
Customer Ratings: Number ratings grade Gocontrol Usb objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Gocontrol Usb.
Product Quality: You don’t always get what you pay for with an Gocontrol Usb, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Gocontrol Usb is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining Gocontrol Usb information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Gocontrol Usb is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: How do I set up the gocontrol linear husbzb-1 USB stick?

A: Setting up the GoControl Linear HUSBZB-1 USB stick with your Pi To set up the GoControl Linear HUSBZB-1 USB stick for Home Assistant on your Pi, you’ll need to 1) plug it in 2) configure for easy access on your Pi and 3) tell HA to turn on Z-wave/Zigbee. Luckily this can be done pretty easily – see below.

Q: What can I do with gocontrol products?

A: GoControl smart products are so easy to install – and they work with nearly everything else that talks Z-Wave®. Mix and match GoControl smart products to create your own personal mix of smart control. Even add other non-GoControl automation products to really rev-up your home’s IQ!

Q: How do I update ha config to work with the USB stick?

A: HA Config needs to be updated to load in the proper zwave and zigbee components to communicate with the USB Stick. Once complete, reboot by entering sudo reboot. You should be all set! Note that the zha database_path is where zigbee device details will be stored.