Skip to content

Contents

20 Best Hictop 3D Printer Idex Independent Dual Extruder of 2023 – Romance University

After hours researching and comparing all models on the market, Romance University finds out the Best Hictop 3D Printer Idex Independent Dual Extruder of 2023. Check our ranking below.

2,269 Reviews Scanned

Rank No. #1
Raise3D E2 Desktop 3D Printer - Features IDEX (Independent Dual Extruders), Auto Bed Leveling, Video-Assisted Offset Calibration, Power Loss Recovery, Filament Run-Out Sensors
  • NOTE: A valid phone number is needed for delivery. All Raise3D Printers are crated and ship via freight carriers. Crated freight shipping is free in the Continental US, but the carriers will not deliver without an appointment. Please provide your best contact number to ensure smooth delivery.
  • INDEPENDENT DUAL EXTRUDERS - E2 features Raise3D’s IDEX technology, which allows the printer to produce two models at once. Use Duplication Mode to use both extruders in synchronized printing, or Mirror Mode, which produces a model and its inverse simultaneously.
  • EASY SET UP, EASY TO USE - E2 features auto bed leveling technology and a video-assisted offset calibration system that guides users through a simple process to verity that the E2 is geometrically aligned. The on-board 7” touchscreen, intuitive visual interface, and on-screen assistance makes 3D printing with the E2 a user-friendly experience.
  • NEVER LOSE A PRINT - E2 features filament run-out sensors that automatically pause the printer if it runs out of filament material, and power loss recovery that automatically stores task progress and seamlessly resumes the most recent task when power is restored.
  • COMPATIBLE WITH A VARIETY OF MATERIALS - E2 works with a wide variety of 1.75mm filament materials, including PLA, ABS, HIPS, PC, TPU, TPE, Nylon, PETG, ASA, PP, PVA, glass fiber infused, carbon fiber infused, metal fill, wood fill, and others that work within E2’s 300℃ temperature range.
Rank No. #2
IDEX 3D Printer Independent Dual Extruder Full Metal Frame High Precision Large Size DIY kit Climber7
  • Independent dual extruder, can switch 4 different working modes: single extruder mode, dual extruder mode, duplication mode and mirrored mode.
Rank No. #3
Sovol SV04 IDEX 3D Printer, Independent Dual Extruder 3D Printer with All Metal Direct Drive 32-bit Silent Motherboard Auto Leveling, Larger Build Volume 300 x 300 x 400mm
  • [IDEX 3D Printer with 4 Different Printing Modes] - Sovol SV04 3D printer is equipped with independent dual direct drive metal extruders that allow you to print two different colors, two different materials and two models simultaneously in the same or opposite direction. Better able to produce high-quality prints with a variety of materials such as PLA, ABS, PETG, TPU, PC, PA, wood, ASA and PVA.
  • [More Space for Creativity] - Please download the latest firmware for SV04 from the official website of sovol before starting. Sovol SV04 size: 300 x 300 x 400 mm. Larger volume than SV01/SV02. Modular design for quick assembly allows for faster start.
  • [Auto Leveling & 32-bit TMC2209 Silent Board] - The automatic leveling sensor on the SV04 makes adjustments to ensure that the bed and nozzle are at an optimal distance throughout the printing process, which improves bed adhesion and print quality. If you have any bed leveling issues please refer to the User Guide and leveling guide video on this product page. Upgraded 32-bit TMC2209 silent board, up to 7 additional drivers, more functions, more stable, super quiet.
  • [Flexible Spring Steel Plate & 500W Power Supply] - The flexible magnetic building plate ensures that your prints grips well to avoid deformation and failed prints. You can peel off the prints without tools, just bend the plate and remove your prints. Built-in 500W branded power supply ensures stable and sufficient performance, fast heat hot bed and nozzle. It protects SV04 from unexpected power surges.
  • [Fully Upgraded 4.3 inch LCD Touchscreen] - The upgraded LCD touch screen from Sovol has an excellent day/night mode and one-button control. The SV04 touch screen can be set to automatically replace the filament without printing paused. All modes are clear and easy to use. Double filament detector reminds you to replace filament, no more worrying about long time printing.
Rank No. #4
TENLOG TL-D3 Pro Independent Dual extruder 3D Printer, BMG extruder, 280 Degree high Temperature Nozzle, Silent Motherboard TMC2209 Driver, 600W Power Supply, Print Size 310x310x350mm.
  • 【Independent Dual Extruder Design】The TL-D3 Pro dual-extruder 3D printer has independent dual-nozzle function, which can not only perform traditional single-nozzle printing, but also perform ultra-precise dual-color duplication printing, mirror printing, and printing two products at the same time. It can also print water-soluble supports, and the two nozzles can print different consumables!
  • 【Upgrade Borosilicate Glass Bed】TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the first layer,the model can be Pick up by hand after cooling.
  • 【High-quality accessories】:Multi-language interface (7 languages) color touch screen, built-in self-developed mute motherboard tmc2209 driver, stronger anti-interference, faster and more stable sports performance, silent printing and low decibel operation!
  • 【Easy to Assemble】It comes with several assembled parts. You can assemble the 3D printer in 3 steps, with its user manual, in about 5 minutes.
  • 【Print recovery】:The printer can resume printing after a power outage or material supply stops to save time and consumables. You can also print with a custom height.
Rank No. #5
FlashForge 3D Printer: The New Creator Pro 2 with Independent Dual Extruder System, 2 Free Spools of PLA Filaments Included(N.W.:1kg/Spool)
  • Independent dual extruders make it possible to produce a clean, dual color print and double productivity under duplicate mode
  • Free FlashForge developed powerful slicing software “FlashPrint” is fully compatible with Creator Pro 2
  • Full manufacturer's warranty fulfilled by FlashForge
Rank No. #6
FLASHFORGE 3D Printer Creator Pro 2, Independent Dual Direct Drive Extruder W/2 Spools, 4 Printing Modes, Metal Frame Structure, Acrylic Covers, Optimized Build Platform
  • 【IDEX 3D Printer with 4 Printing Modes】Creator Pro 2 3D printer is equipped with independent dual direct drive metal extruders that allow you to print two different colors and two different materials. Offers higher productivity and more possibilities.
  • 【Double Productivit 】 Creator Pro 2 equips with Independent dual extruders (IDEX). 2 nozzles work simultaneously and independently to achieve double productivity. Perfect for small workshop's production demands.
  • 【Heating bed】 Rapid steady heating prevent model warping much easier to take down models. Better able to produce high-quality prints with a variety of materials such as PLA, ABS, PETG, TPU, Wood and PVA.
  • 【Anti-scrape Design】When using dual color printing, there is much less cross contamination than with other dual extruder 3D printers. It is suitable for industrial design, tool design, architects, mechanical designers, etc.
  • 【Efficient After-sales Support】All of our 3d printers provide one month free return and exchange. Lifetime technical support, a one-year warranty and reliable 12-hour response service. At Flashforge, zero risk purchase is for every customer's smiles.
Rank No. #7
TENLOG TL-D3 Pro Independent Dual Extruder 3D Printer, Upgrade BMG Extruder,300 Degree High Temperature Nozzle,Silent Mainboard TMC2209 Drive,600W Power Supply,11.8''x11.8''x13.8''
  • 【32-Bit Motherboard】: The main chip is upgraded from 8-bit to 32-bit, and the printer runs more smoothly The 32-bit motherboard supports wifi and can control the printer through the Internet!
  • 【Print recovery】:The printer can resume printing after a power outage or material supply stops to save time and consumables. You can also print with a custom height.
  • 【Springsteel PEI Coated Magnetic Build-plate】 From hundreds of hours of testing, we have determined that the most versatile, effective, and cost efficient printing surface is PEI coated springsteel plating. We have created a dual sided system to allow for smooth surface finishes or rougher textured finishes to ensure maximum adhesion. This interchangeable system allows individual users to get the perfect first layer while allowing print farms to maximize production with hot-swappable plates. Along with the new and improved build-plate, we’ve revamped the bed level adjustment system with finely tuned silicone spacers to allow for longer lasting bed levels and a more rigid frame.
  • [Super cooling module]: The fans of the two nozzles can be controlled independently. The side fans of the nozzles use two blower fans to dissipate heat from the print model. The front fans of the nozzles are upgraded to 5010 silent fans to increase the cooling capacity!
  • 【Insulated Bed (Edge to Edge) 】One of the biggest problems with the standard 3D printing industry and our previous TL-D3 Pro was the bed heating. Waiting for optimal build plate temperature can be the difference between a great print and a failed one. The D3 Vulcan has custom edge to edge insulation to maximize thermal efficiency, this addition reduces average heat times by up to 50%.
Rank No. #8
TL TENLOG TL-D3 V2 Independent Dual-Head 3D Printer, WI-Fi Function, Silent Motherboard TMC2209 Driver, 400W Power Supply, Support PVA TPU ABS PLA, BMG extruder, 11.8''x11.8''x13.8''
  • 【INDEPENDENT DUAL EXTRUDERS】:Our TL-D3 V2 dual extruder 3D printer has dual nozzles independent of each other, so you can print in dual material/duplication/mirror mode. With dual material printing mode, you can get two color models. Choose duplication or mirror mode, you can get two models of the same color or different colors.
  • 【32-Bit Motherboard】: The main chip is upgraded from 8-bit to 32-bit, and the printer runs more smoothly The 32-bit motherboard supports wifi and can control the printer through the Internet!
  • 【Print recovery】:The printer can resume printing after a power outage or material supply stops to save time and consumables. You can also print with a custom height.
  • 【Upgraded PEI Magnetic Board】: TENLOG upgraded PEI magnetic board, which makes the printed matter fit better and will not warp. Even the first layer is super soft, and the model can be picked up by hand after cooling.
  • [Super cooling module]: The fans of the two nozzles can be controlled independently. The side fans of the nozzles use two blower fans to dissipate heat from the print model. The front fans of the nozzles are upgraded to 5010 silent fans to increase the cooling capacity!
Rank No. #9
JGMAKER Large 3D Printer Artist-D Pro Auto Leveling IDEX Dual Extruder 3D Printers Direct Drive Extruder with Linear Rail X-axis Optical Endstop Meanwell Power Supply 32bit TMC2209 Driver
  • Large Build Volume: Ultra-large forming volume allows you to print single model up to 300*300*340mm, or two of the same/mirrored model at the same time up to 111*300*340mm by utilizing its "duplicate" or "mirror" mode.
  • X axis Optical Switch/Photoelectric Sensor: Change the mechanical limit switch to an optical switch which will function more accuracy and precision.User-Friendly Touch Screen: 3.5 Inch HD Color Touch Screen, as well as user interface with newly designed operation UI system, which provides you with better operation experience.
  • Ultra-Silent Motor Driver: Come with TMC2209 ultra-silent driver, as well as 32-bit motherboard, Artist-D Pro delivers silence-oriented upgrades, ensures smoother movement under a quiet environment.
  • Meanwell Power Supply: Brand power supply, more trustworthy with better quality and service, ensure stability and safety for operation.
Rank No. #10
FlashForge Creator 3 Pro Independent Dual Extruder 3D Printer
  • IDEX Structure - with multiple printing modes, Duplicate Printing, Dual Color Printing, and Mirror Printing for double the efficiencies
  • Maximum printing temperature up to 320°C. Creator 3 Pro comes with Carbon Steel (Hardened) nozzles which are suitable for printing carbon fiber composite materials
  • 60 seconds to Reach extruder temperature 200°C. And 3 minutes to heat up the build plate to 110℃.
  • New dual-fan configuration for better printing quality and high success print rate
  • Effortlessly swap between different nozzles and heating assembly
Rank No. #11
FLASHFORGE Creator Pro 2 3D Printer Independent Dual Extruder, Dual Color Printing, Open 3D Slicer Support with 2 Spools Filament, Work with PLA, ABS, PVA, PETG Filament, Build Volume 200*148*150mm
  • ✨INDEPENDENT DUAL EXTRUDERS - Dual extruder 3D printer Creator Pro 2 realizes Double productivity & Dual filament printing. 4 print modes, Mirror, Duplicate, Dual Filament and Dual-color modes. 2 nozzles work simultaneously and independently to achieve double productivity.
  • ✨HEATING BED - Rapid steady heating prevent model warping much easier to take down models. It supports various types of filament ABS, PLA, PVA, HIPS, creating more realistic models!
  • ✨REMOVABLE COVER - Creator Pro 2 dual extruder 3d printer lets you adjust chamber temperature at ease. Simply remove its cover when printing PLA filament, as high environment temperature may cause nozzle clog. When print ABS filament, please close the chamber for better quality.
  • ✨RESIDUE SCRAPING DESIGN - After printing, the print head moves to the residue scraping board edge to scrape any residual material on the nozzle. This design of dual extruder 3D printer Creator Pro 2 helps avoid misalignments in the colors, get cleaner dual prints.
  • ✨WIDE RANGE OF APPLICATIONS - Perfect for small workshop's production demands. Dual filament printing means dual filament color options. Creator Pro 2 3D printer dual extruder allows printing different parts of a model in different colors!
Rank No. #12
FlashForge Creator Pro, Dual Extruder 3D Printers W/2 Spools, Fully Metal Frame, Acrylic Covers, DIY FDM 3D Printer Kit with Optimized Build Platform, Works with ABS and PLA
  • 👉【Patented Dual Extruder】Excellent industrial design, high-end manufacturing, it can be used out of the box and support dual color print and dual material print. Ventilative printing or enclosed printing for you to choose when printing the different types of filament.
  • 👉【Heating Bed】Rapid steady heating prevent model warping much easier to take down models. And better quality by using cooling fan. Creator pro support PLA, ABS, PVA, HIPS,TPU and PETG etc.
  • 👉【Precision Manufacturing Process】Creator Pro using industrial-grade manufacturing,double linear guide design,can achieve high precision, fast printing.
  • 👉【Open Source Software】Support multiple printing formats and compatible with different slicing engines,eg:Simplify3D, ReplicatorG, Makerware, Slic3r, Skeinforge, Cura.
  • 👉【Wide applicability】Creator pro is suitable for education institutions for hands-on, project-based learning,designers,tinkerers, hobbyists & home users, advanced 3D users in industry, engineering and product development.
Rank No. #13
LNL - Tenlog TL-D3 Pro Dual Extruder 3D Printer - 300 Degree High Temperature Nozzle,Silent Mainboards TMC2209 Drive,600W Power Supply,Support PVA TPU ABS PLA Nylon,11.8''x11.8''x13.8''…
  • 💥 EACH MACHINE Has Been Fully Tested at Our U.S. Based Warehouse to eliminate the chance of damage during overseas transit. This ensures you’ll spend more time printing and less time troubleshooting. If you do have a problem, our full time regional staff will always be here to help.
  • 【Independent Dual Extruder Design】Our TL-D3 Pro dual extruder 3D printer has dual nozzles independent of each other, so you can print in dual material/duplication/mirror mode. With dual material printing mode, you can get two color models. Choose duplication or mirror mode, you can get two models of the same color or different colors.
  • 【Upgrade Borosilicate Glass Bed】Upgraded borosilicate glass bed enables prints to adhere better without warping. After the bed cools, models will pop-off with little to no resistance, leaving a smooth finish.
  • 【Self-Developed Silent Motherboard 】The TL-D3 Pro built-in self-developed silent motherboard TMC2209 driver, which has stronger anti-interference, faster and more stable motion performance, silent printing, and low decibel operation.
  • 【Metal Copper Brush】 Our new copper brush can wipe off additional filament before and during printing, this will result in significantly less stringing and artifacts.
Rank No. #14
Snapmaker J1s 3D Printer, IDEX 3D Printer 5X Fast Speed, FDM 3D Printers with Independent Dual Extruder Direct Drive,Dual-Material Printing,4 Printing Modes,All Metal Structure,Large Print Volume
  • 【Fast and Precise Printing】: Snapmaker dual extruder 3D printer incorporates Vibration Compensation tech to ensure stable printing under high-frequency vibrations. It enables uninterrupted extruder switch and Cornering Optimization for smooth, accurate prints with sharp and precise corners, minimizing defects.
  • 【One-Piece Aluminum Alloy Housing】: Snapmaker J1s is a stable and precise machine, with a one-piece die-cast frame that ensures optimal stability and precision. It produces high-quality output without any wobbling or deformation, making it perfect for any printing project.
  • 【Double Your Productivity with Independent Dual Extruder】: Snapmaker IDEX 3D Printer’s unique extrusion system enables dual-material printing without waste or contamination.IDEX is the only extrusion system with two separate extruders moving independently on the X-axis, enabling you to run two prints simultaneously. Its Copy Mode and Mirror Mode simplify batch printing and reduce wait time for symmetrical models. It also allows for stopping one print without affecting the other.
  • 【Advanced for the Advanced】: With a 300°C nozzle temp, silicone hot end socks, anti-clogging measures, dual direct drives, and a filament sensor, Snapmaker J1s provides high precision and can handle various materials.
  • 【Intelligent Calibration in 10 Less Minutes】: Z offset calibration makes Snapmaker FDM 3D Printer taking just 10 minutes with simplified electrical conductivity, improving accuracy and avoiding layer shifting while printing. The 3-point leveling system and double-sided PEI glass plate guarantee excellent adhesion for the first layer, reducing downtime by 70-80%. Snapmaker J1s is advanced version of J1--with the additional strong print cooling system. You won't need to remove the top panel to pri
Rank No. #15
Geeetech Mizar M IDEX 3D Printer, Dual Extruder 3D Printer with All Metal, Multicolor 3D Printer Achieves Two-color Zoned, Layered, Mixed Gradient Printing, 3D Touch Auto Leveling Double Z-axis Silent
  • 【Unique Multicolor Printing】There is no longer only one color in the model you want to print. When 3d printers use separated color printing mode, the printer can switch between two filaments so that your model appears in two different colors. Let you say goodbye to ordinary monochrome printing, realize your fantastic multi-color ideas.
  • 【Creative Mixed Color Printing】 When you want to create a new color with 3d printers for sale, by mixed color printing mode, you can mix two colors of filament to get a brand new color, and you can also get a gradient color model by gradient mixing printing mode.
  • 【3d Touch Auto Leveling & 32-bit TMC2208 Silent Board】 With convenient one-botton auto leveling, Mizar M metal 3d printer can adjust the height of the nozzle and the heating bed to the same level within 5 minutes, which greatly saves leveling time; Equipped with a 32-bit silent motherboard and ultra-quiet driver, which can bring smoother operation and effectively reduce the noise of the stepper motor, running sound as low as 47db, which provides you with a more comfortable printing environment.
  • 【Double Z-axis Screws & All-Metal Body Structure】 Through the design of dual Z-axis screws + Z-axis dual motor drive, Mizar M dual extruder 3d printer works more smoothly and synchronously, which improves printing accuracy and precision; All-aluminum structure increases the weight of the base and reduces the center of gravity of the machine. This design makes printing more stable. Support filament-1.75mm PLA/ABS/ PETG.
  • 【Strict Test and Customer Services】Every fdm 3d printer is rigorously tested before leaving the factory, and Mizar M large 3d printer is provided with a one-year warranty and lifetime technical support.
Rank No. #16
HICTOP Ender 3 Extruder Upgrade Replacement Aluminum MK8 Extruder Drive Feed for Creality Ender 3, Ender 3 Pro, Ender 5, CR-10, CR-10S, CR-10 S4, CR-10 S5 3D Printers
  • 1.Ender 3 extruder upgrade is compatible with Creality Ender 3, ender 3 Pro, ender 5, CR-10, CR-10S, CR-10 S4, CR-10 S5 3D printers.
  • 2.The pneumatic joint has been removed from the metal extruder so the gear density has been greatly increased, the gear pressure can be adjusted with the bolts, and the scraping of the filament when pulled in can be prevented by the beveled filament intake.
  • 3.Ender 3 pro extruder is used to replace the acrylic parts from the original 3D printers, it is much more strong and durable.
  • 4.Ender 3 metal extruder: For 1.75mm filament of 3D printer MK8 bowden extruder frame
  • 5.Ender 3 pro extruder upgrade is easy to install with the help of the video we have offered. All the necessary accessories are included in the package.you do not need to flash the firmware.
SaleRank No. #17
R QIDI TECHNOLOGY i Fast 3D Printer, Industrial Grade Structure, with Dual Extruder for Fast Printing, Super Large Printing Size 330×250×320mm
  • 【Faster printing】Fully industrial-grade structure, using the second-generation Qidi dual Z-axis structure, all of the original motion structure is upgraded to linear guides, with the high temp extruder, the filament extruding is faster and smoother, the printing accuracy is higher .The printing speed is increased by 20%, it is set to print easily at 100cc per hour.
  • 【Freedom in the choice of the filament】 Qidi iFast can print almost all kinds of filaments which suitable for FDM 3D printers on the market, such as PLA ,PLA+ ,ABS ,PETG, NYLON,etc. The iFast 3d printer equipped with a heated chamber, which can be heated to 60°C. The excellent mechanical structure can produce more robust manufacturing-grade parts.
  • 【Freedom in manufacturing of the complex parts】 Qidi iFast is equipped with automatic dual extruder, which can automatically adjust the left and right extruder up and down according to the software. With the PVA (water-soluble) support, it is very suitable for printing manufacturing-level parts with complex structures and realizing precision manufacturing.
  • 【All metal high temp extruder】 Compared with the normal brass nozzles which on the market, it is more durable and prints smoother. The iFast 3d printer is pre-installed with dual extruder, and the print size is 330×250×320mm.
  • 【Excellent user experience, large UI interface】It’s equipped with self-developed QIDI slicing software, two modes can be selected: normal mode and expert mode. The normal mode is suitable for novices, the parameter system has been intelligently set, no other operations are required, it is very simple. Expert mode is suitable for experienced users, who can deeply participate in modifying parameters and personalized printing models.
SaleRank No. #18
FlashForge Creator Pro 2 Fully Enclosed 3D Printer with Dual Extruder, Metal Frame Structure, Dual Mixed Color/Dual Mixed Filament/Copy/Mirror Printing Mode, Anti-Leakage Wire Design, 200x148x150mm
  • 【Independent dual extruder】--- Make the Creator Pro2 possible to print dual mixed color models, print two models in the same time, save half time in printing.
  • 【4 printing mode】--- ①Dual Mixed Filament: you can print 1 model in two different material filament like using the water-soluble filament to print supporting pillar; ②Dual mixed color mode: you can print two mixed color in 1 model. ③Copy/mirror printing mode: you can print 2 models in the same time, saving haft time for you.
  • 【Anti-Leakage Wire Design】--- Built-in nozzle anti-overflow filaments baffle, which can avoid filaments overflow in dual mixed color/dual mixed filament printing mode to ensure that the models are smooth and don’t mix colors.
  • 【Equipped With Top Cover And Front Door】--- Open the front door and remove the top cover to create a ventilated environment, which is conducive to print of PLA filaments; Close the front door and cover the top cover to create a closed environment, which is conducive to print of ABS filaments. It can fit PLA,ABS,PETG,TPU etc.
  • 【What You Get】--- Flashforge Creator Pro2 3D printer, 12 months warranty, lifetime technical assistance and 24 hours professional customer service.
Rank No. #19
LNL TL-D3 Pro Dual Extruder 3D Printer - Upgrade BMG Extruder,300 Degree High Temperature Nozzle,Silent Mainboard TMC2209 Drive,600W Power. We Inspect Every Printer in The U.S.
  • 💥 EACH MACHINE Has Been Fully Tested at Our U.S. Based Warehouse to eliminate the chance of damage during overseas transit. This ensures you’ll spend more time printing and less time troubleshooting. If you do have a problem, our full time regional staff will always be here to help.
  • 💥 DUAL MATERIAL PRINTING: Temperature, Extruder speed, printing speed, and infill density can be separately set for each nozzle. Even with different diameter nozzles, the TL-D3 Pro 3D printer can seamlessly print.
  • 💥 BEGINNERS to PROFESSIONALS - Get your Professional 3D Printer Kit setup quick and easy. Most of our customers can get setup in under 10-minutes. Our US-based support team are also available to assist if you have any trouble!
  • 💥 MIRROR MODE REPLICATOR - Get perfectly symmetric 3D prints with Mirror Mode. Two nozzles can work together or independently to create duplicate or mirrored prints, while using any combination of materials and colors.
  • 💥 FILAMENT RUNOUT DETECTION AND POWER LOSS RECOVERY - This advanced feature prevents runout of filament during a print or loss of a job if the power disconnects during extrusion. Critical when completing longer prints and avoiding waste.
Rank No. #20
Bigtreetech Upgrade Dual Gear Extruder, Double Gear MK8 Extruder 3D Printer Dual Driver Stock Feeder All Metal 1.75mm Filament Extruder Kit for CR-10S Pro/CR-10/ Ender 3 V2/Ender 3/Ender 3 Pro Series
  • 💓【Upgraded Dual Extruder】Dual gears and dual pneumatic combined extrusion structure, large extrusion force, enhanced feeding intensity, ensuring smooth feeding. The double gear rotation design locks the filament, which is beneficial to improve printing quality and reduce filament slipping, high-speed extrusion or retraction, better pressure to push the filament into the printer, less easy to lose steps, faster printing speed
  • 💓【Compatibility】Double gear mk8 extruder, perfect replacement for 3D printer CR-10/ CR-10S/ CR-10S Pro/ Ender 3 (initial version)/Ender 3 v2/Ender 3 pro/Ender 5/Tornado, etc. 1.75 mm filament (Set only for 3D printers with motor shafts exceeding 20mm, please measure the shaft length before placing an order.)
  • 💓【Stable and Durable】All metal aluminum alloy, high quality double gear extrusion, compared with ordinary plastic drive, this high aluminum metal filament extruder is stable and durable. The idler gear has been upgraded with a brass washer added between the stainless steel gear and the aluminum housing, so the gear does not collide seriously with the housing, which helps reduce stock extruder wear.
  • 💓【Adjustable Spring】The tension of the extrusion spring can be adjusted by tightening the screw, which greatly improves printing accuracy and paper feeding problems. Strong extrusion end spring enhances feeding strength and ensures stable pushing of filaments into the hot end of the printer. Suitable for most types of filament, such as ABS, PLA, TPU, PTEG etc.
  • 💓【Imported Materials】The 3d printer dual extruder material is made of brand new imported aviation aluminum material and processed by CNC imported from Japan. The kit does not include the stepper motor, motor bracket and instructions, we need to make them ourselves. If you need some installation help, there are video introductions online, and you can seek our technical help at any time.

Last update on 2023-08-02 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Hictop 3D Printer Idex Independent Dual Extruder?

Do you get stressed out thinking about shopping for a great Hictop 3D Printer Idex Independent Dual Extruder? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Hictop 3D Printer Idex Independent Dual Extruder, which is why we have assembled a comprehensive list of the greatest Hictop 3D Printer Idex Independent Dual Extruder available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Hictop 3D Printer Idex Independent Dual Extruder that you consider buying. Your questions might include the following:

  • Is it worth buying an Hictop 3D Printer Idex Independent Dual Extruder?
  • What benefits are there with buying an Hictop 3D Printer Idex Independent Dual Extruder?
  • What factors deserve consideration when shopping for an effective Hictop 3D Printer Idex Independent Dual Extruder?
  • Why is it crucial to invest in any Hictop 3D Printer Idex Independent Dual Extruder, much less the best one?
  • Which Hictop 3D Printer Idex Independent Dual Extruder are good in the current market?
  • Where can you find information like this about Hictop 3D Printer Idex Independent Dual Extruder?

We’re convinced that you likely have far more questions than just these regarding Hictop 3D Printer Idex Independent Dual Extruder, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Hictop 3D Printer Idex Independent Dual Extruder, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Hictop 3D Printer Idex Independent Dual Extruder. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an Hictop 3D Printer Idex Independent Dual Extruder buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Hictop 3D Printer Idex Independent Dual Extruder currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Hictop 3D Printer Idex Independent Dual Extruder has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Hictop 3D Printer Idex Independent Dual Extruder?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Hictop 3D Printer Idex Independent Dual Extruder.
  5. Customer Ratings: Number ratings grade Hictop 3D Printer Idex Independent Dual Extruder objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Hictop 3D Printer Idex Independent Dual Extruder.
  7. Product Quality: You don’t always get what you pay for with an Hictop 3D Printer Idex Independent Dual Extruder, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Hictop 3D Printer Idex Independent Dual Extruder is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining Hictop 3D Printer Idex Independent Dual Extruder information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Hictop 3D Printer Idex Independent Dual Extruder is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: What are the features of hictop D3 Hero 3D printer?

A: The maximum print size is 300*300*350mm. Simultaneous Nozzle Temperature: HICTOP D3 Hero 3D Printer works on several materials, such as 1.75mm PLA,TPU,PVA,PP, ABS, Wood and so on. The maximum printing speed is 180mm/s, recommended print speed is 50mm/s (Specifically to set up according to your model)

Q: Why choose hictop filaments?

A: Anyone can now print different filaments requirement such as PLA with PVA support. HICTOP offers the highest quality filaments and the cheapest in the market. Our filaments are made from the finest and safest materials, developed to be efficient to all Printer brands.

Q: What are the advantages of dual z axis extruder design?

A: Dual Z Axis Design: The dual extruders avoid the problem of leftover material contamination compared to single extruder. The X-axis guide rail help a lot with improving the accuracy.

Related Post: