Skip to content

The Best 0 10V To 4 20Ma of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best 0 10V To 4 20Ma of 2022. Check our ranking below.

2,576 Reviews Scanned

Rank No. #1
NOYITO Voltage to Current Module 0-10V to 4-20mA
  • NOYITO Voltage to Current module, 0-10V voltage signal conversion to 4-20mA current signal output, by adjusting the voltage to adjust the size of the current. Can be used to generate the signal source, valve adjustment, inverter control, PLC debugging, instrumentation test, LED test, analog transmitter.
  • Implement the industry standard voltage (0-10V) into an industry standard current (0-20mA, 4-20mA)., linear output, the output signal can be directly connected to the AD converter, with the AD function with the microcontroller connection.
  • Using single-chip embedded technology. The module is small and easy to use in different places.
  • Easy to use, can be fine-tuned by potentiometer.
  • Module working voltage: DC12-24V . 【Please read the product pictures on the left side of the page for the wiring diagram of the product.】
Rank No. #2
Acxico 4Pcs Current to Voltage Converter Module 0/4-20mA to 0-3.3V 0-5V 0-10V Voltage Transmitter Signal Conversion Conditioning Board
  • This module is used for the end of the current signal transmission, and converts the signal into a voltage signal for detection by the single chip microcomputer. The current input supports 4-20Ma, 0-20mA, and the voltage output supports 0-3.3V 0-5V 0-10V.
  • Wide supply voltage range, output voltage support multiple ranges, zero and full scale can be adjusted.The current signal sampling resistor adopts high-precision color ring resistance, high precision, small temperature drift and high power.
  • During the transmission of the circuit signal, the voltage signal will become weaker as the transmission distance increases. The current transmission can avoid the weakening of the signal.High stability, good linearity, industrial grade.
  • Package Included:4Pcs Current to Voltage Converter Module 0/4-20mA to 0-3.3V 0-5V 0-10V Voltage Transmitter Signal Conversion Conditioning Board(If there are any problems with the product, please send us pictures. Tell us more details about this problem.)
  • Thank you so much for your purchasing from our store.Any question ,please feel free to contact us.
Rank No. #3
Ximimark 2Pcs Current to Voltage Converter Module 0/4-20mA to 0-3.3V 0-5V 0-10V Voltage Transmitter Signal Conversion Conditioning Board
  • During the transmission of the circuit signal, the voltage signal will become weaker as the transmission distance increases. The current transmission can avoid the weakening of the signal.
  • This module is used for the end of the current signal transmission, and converts the signal into a voltage signal for detection by the single chip microcomputer. The current input supports 4-20Ma, 0-20mA, and the voltage output supports 0-3.3V 0-5V 0-10V.
  • Wide supply voltage range, output voltage support multiple ranges, zero and full scale can be adjusted.
  • The current signal sampling resistor adopts high-precision color ring resistance, high precision, small temperature drift and high power.
  • High stability, good linearity, industrial grade.
Rank No. #4
KNACRO Voltage to Current Module 0-10V Voltage Conversion to 4-20MA Current(0-10V to 4-20MA)
  • Voltage to current module, can 0-2.5V / 3.3V / 5V 10V / 15V / 24V voltage conversion to 0-20mA / 4-20MA current signal output, by adjusting the voltage to adjust the size of the current. The module is small and easy to use in different places.
  • Using single-chip embedded technology.
  • Implement the industry standard voltage (0-2.5V / 3.3V / 5V 10V / 15V / 24V) into an industry standard current (0-10mA, 4-20mA).Drive capability MAX15mA, linear output, the output signal can be directly connected to the AD converter, with the AD function with the microcontroller connection.
  • Easy to operate, can be fine-tuned by potentiometer.
Rank No. #5
Taidacent 10/12 Bit AD Multi Channel 4-20Ma 0-5V 0-10V PLC Analog I/O Input to RS485 Modbus RTU TCP Converter Module (4-20mA)
  • Analog quantity acquisition module 20mA 5V 10V to RS485 transmitter Modbus wide voltage high precision AD
  • Collect up to two analog signals (4-20mA, 0-10V, 0-5V) from the scene and convert them to 485 interface standard ModBus-RTU communication protocol for upload.
  • The standard Modbus-RTU protocol is adopted, and the address and baud rate can be set by the upper computer software, and can be connected to the 485 bus.
  • The products are designed and manufactured according to industrial standards, with overvoltage protection, overcurrent protection, strong anti-interference ability, and high reliability.
  • The maximum communication distance of the 485 interface can reach 2000 meters, and it can be directly connected to the on-site PLC, industrial control instrument, configuration screen or configuration software.
Rank No. #6
YWBL-WH DC 24V Current Isolator Transmitter 4-20mA PLC Detect Conditioner(One in and one Out 4-20mA Turn 0-10V)
  • Specifications: DC conditioner supply voltage: DC 24V ± 10%; rated power consumption: 1W; response time: 100MS; dielectric strength: 2000V AC / 1MIN; input impedance: 50Ω; ambient temperature: -20 - 55 (℃); size: 100 × 22.5 × 114.5 (mm).
  • Multichannel: Multichannel input and output, ultra-thin, intelligent and isolated safety net. Channel configuration: 1 input and 1 output, 1 input and 2 outputs.
  • Low Power Consumption: Low power consumption, theoretical power consumption is less than or equal to 1W.
  • Product Material and Safety: Current conditioner is made of high quality electronic components with high precision. In addition, our conditioner has built-in multi-class safety protection function, which is safe to use.
  • Widely Used: converters are widely used in industrial equipment, such as large motors, medical equipment, etc.
Rank No. #7
Cllena 4-20mA Adjustable Signal Generator, DC 0-10V 0/4-20mA Current Voltage Analog Simulator for PLC Panel Debugging Device Testing Frequency Converter Transmitter Output Simulation
  • 【AMP & VOLT DUAL SIGNAL GENERATOR】- Multifunctional signal generator kit is able to generate ampere & voltage by one module, which generate 0/4 - 20mA current signal and 0-10V voltage signal just by rotating a multi-cycle precise potentiometer, simple and handy.
  • 【AMP & VOLT DISPLAY CALIBRATION】- There are current and voltage display calibrating potentiometer on the back of the module. If the display is accurate, you can calibrate the display value of current voltage by yourself.
  • 【CLEAR LED DISPLAY】- This 4-20ma signal generator has bright and clear 3-digit LED digital display screen, which can be used to monitor the output current and voltage. You just need to push the switch below the monitor easy to switch the display.
  • 【WIDE APPLICATION】- This signal adapter can be used as signal generator, valve adjustment, inverter control, PLC debugging, panel debugging, LED testing, simulating the output of transmitter.
  • 【Product Dimension】- 3.93" x 2.67" x 1.49" (100mm x 68mm x 38mm), portable and convenient, easy to use.
Rank No. #8
Riiai DC 0-10V 0/4-20mA Current Voltage Signal Generator, Built-in Battery Power Supply Interface Analog Simulator, Adjustable 4-Digit Display, for PLC, Panel Debugging, Device Testing
  • 【2-in-1 Voltage & Current Generator】--- Voltage Output: -10V~+10V, precision is 0.01V, current output: 0-22mA, precision is 0.01mA, rotate the encoder knob to adjust output voltage and current, switchable and adjustable, can be calibrated. Encoder knob rotate one circle has 20 pulses.
  • 【Multiple 4-Digit Display】--- With 4 different types of digit display, two decimal points, you can press "Mode" button to switch the display mode between voltage and current, you can also follow the instructions to switch 0-100 percent or 0-50HZ display.
  • 【Different Power Supply Modes】--- With 1000mAh 3.7V built-in rechargeable battery embedded inside (charged via micro USB port), it can be powered via various ways, micro USB-5V, external power DC 15-30V, each can make the signal generator to work.
  • 【Safe to Use】--- Output range: passive or active 0-22mA, -10~+10V, voltage output can be exactly 0.00V; output range and precision are programmable and adjustable. Output is with short circuit protection, power supply with reverse connection protection, which is safe for you to use. User can set 9 x fast signal output points, more convenient to do debugging.
  • 【Wide Application】--- It can be used for PLC and panel debugging, device testing, frequency converter, flow valve, servo motors speed regulation, light dimmer and ect. With small size design, it is easy and convenient for you to carry it.
Rank No. #9
UCTRONICS DC ±10V 0/4-20mA Current Voltage Signal Generator, USB Power Supply Interface Analog Simulator for PLC and Panel Debugging, Device Testing, Frequency Converter, Flow Valve
  • Power Supply: external connection micro USB-5V or external power DC 15-30V, each way makes the generator work, both ways also can be connected at the same time. Battery is not included.
  • Voltage Output: DC ±10V, precision is 0.01V, rotate the encoder knob to adjust output voltage, can be calibrated.
  • Current Output: 0-22mA, precision is 0.01mA, rotate the encoder knob to adjust output current, can be calibrated.
  • Multiple display: just push the small botton to switch the display mode between voltage and current, you can also follow the instructions to switch 0-100 percent or 0-50HZ display.
  • Product Dimension: 3.94” x 2.36” x 0.79” (100mm x 60mm x 20mm), portable and convenient.
SaleRank No. #10
NOYITO Current to Voltage Converter Signal Conversion Module 4-20mA 0-20mA to 0-3.3V 0-5.0V 0-10.0V Amp to Volt Transmitter Board
  • NOYITO current to voltage converter module will be powered by 7-36V, current input range is 4-20mA/0-20mA, voltage output range is 0-3.3V/0-5V/0-10V.
  • Usage: In the process of signal transmission, the voltage signal will be weaker with the increase of transmission distance. Current transmission can avoid the signal weakening.
  • High accuracy: The current signal sampling resistor adopts high-precision color ring resistance, offers high accuracy, small temperature drift and high power.
  • Adjustable: Zero and full range can be adjusted as your needs; the module is with high stability, good linearity, industrial grade.
  • Reserve connection protection: It is designed with reverse connection protection, if wires connect reversely, it will protect the module from burning.

Last update on 2023-11-11 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best 0 10V To 4 20Ma?

Do you get stressed out thinking about shopping for a great 0 10V To 4 20Ma? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 0 10V To 4 20Ma, which is why we have assembled a comprehensive list of the greatest 0 10V To 4 20Ma available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 0 10V To 4 20Ma that you consider buying. Your questions might include the following:

  • Is it worth buying an 0 10V To 4 20Ma?
  • What benefits are there with buying an 0 10V To 4 20Ma?
  • What factors deserve consideration when shopping for an effective 0 10V To 4 20Ma?
  • Why is it crucial to invest in any 0 10V To 4 20Ma, much less the best one?
  • Which 0 10V To 4 20Ma are good in the current market?
  • Where can you find information like this about 0 10V To 4 20Ma?

We’re convinced that you likely have far more questions than just these regarding 0 10V To 4 20Ma, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for 0 10V To 4 20Ma, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 0 10V To 4 20Ma. Make sure that you are only using trustworthy and credible websites and sources.

We provide an 0 10V To 4 20Ma buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 0 10V To 4 20Ma currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of 0 10V To 4 20Ma has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an 0 10V To 4 20Ma?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your 0 10V To 4 20Ma.
  5. Customer Ratings: Number ratings grade 0 10V To 4 20Ma objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 0 10V To 4 20Ma.
  7. Product Quality: You don’t always get what you pay for with an 0 10V To 4 20Ma, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an 0 10V To 4 20Ma is should be an indication of how long it will work out for you.

We always remember that maintaining 0 10V To 4 20Ma information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding 0 10V To 4 20Ma is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: