Skip to content

The Best 1S Battery Connector of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best 1S Battery Connector of 2022. Check our ranking below.

2,218 Reviews Scanned

Rank No. #1
BETAFPV 8pcs BT2.0 300mAh 1S Battery 4.35V 30C/60C FPV Lipo with 1.0mm Banana Connector for FPV Tiny Whoop 1S Brushless Whoop Drone Like Cetus FPV Kit Meteor65 Micro Whoop Drone
BETAFPV 8pcs BT2.0 300mAh 1S Battery 4.35V 30C/60C FPV Lipo with 1.0mm Banana Connector for FPV Tiny Whoop 1S Brushless Whoop Drone Like Cetus FPV Kit Meteor65 Micro Whoop Drone
  • 【9A Continuous current】BETAFPV exclusive designed BT2.0 Connector AKA 1.0mm Banana connector which can support 9A continuous current and 15A burst while the PH2.0 connector is just support 4.5A continuous current. With this 300mAh 1S BT2.0 battery, all 1S brushless drone will gain powerful and perform perfectly
  • 【Discharge Rate】The discharge of the BT2.0 300mAh 1S lipo is improved a lot that the voltage drops more slowly, so pilots can enjoy more flight time without disturb of low voltage warning by solving the problem of voltage sag
  • 【1.0mm Banana Connector】1.0mm Banana Connector is more durable in terms of fit and conductivity than crimped pin. Highly recommend to use our newest BT2.0 connector to get the best performance from this BT2.0 300mAh 1s battery
  • 【Flight Time】Discharge curve is higher than PH2.0 battery which means it can discharge more current in the same capacity and provide more power. You can get 2mins flight time in full throttle on Meteor65
  • 【Extra Adapter Cable】Pilots can charge BT2.0 battery by PH2.0 charger with BT2.0-PH2.0 adapter cable(NOT INCLUDED), no need to buy additional BT2.0 charger. But we also have BT2.0 Battery Tester & charger for your need
View Product
Rank No. #2
elechawk 10 Pairs 2.0mm Spade 2P Cable 8cm Lead Plug Connector Male and Female for 1S Lipo Battery Charging Drone Syma X5C X5SW SNAPTAIN S5C
elechawk 10 Pairs 2.0mm Spade 2P Cable 8cm Lead Plug Connector Male and Female for 1S Lipo Battery Charging Drone Syma X5C X5SW SNAPTAIN S5C
  • Include 10 pairs male and female cable
  • 2.0mm pitch connector, 22AWG silicone wire, 8cm cable length
  • Suitable as a power cable or charging cable for 1S 3.7V lipo battery
  • The connector is compatible with drone like Syma X5C X5SW, SNAPTAIN S5C, Holy Stone HS170, Hubsan X4 H107C H107D, Walkera Super CP etc.
View Product
Rank No. #3
WMYCONCONG 20 Pairs 2.0mm Spade 2 Pin Cable Lead Plug Connector Male and Female for 1S LiPo Battery RC Quadcopter Drone Multirotors
WMYCONCONG 20 Pairs 2.0mm Spade 2 Pin Cable Lead Plug Connector Male and Female for 1S LiPo Battery RC Quadcopter Drone Multirotors
  • 2.0mm pitch connector, locking tabs, very easy to use, a must need to replace your 2s battery charger, 3.7v lipo battery charger.
  • Suitable as a power cable or charging cable for 1S 3.7V lipo battery, great for adding battery connectors to a lot of buck converters, drones, transmitters, and cameras.
  • 22AWG silicone wire, wires are highly flexible, 8cm cable, extra length makes for easier charging.
  • Application: Compatible with Syma X5C X5SW, SNAPTAIN S5C, Holy Stone HS170, Hubsan X4 H107C H107D, Hubsan X4 H107L, JJRC 1000 2.4GHz, JJRC F180, Walkera Super CP etc.
  • Package Content: 40 pcs Battery Charging Cable. (20xMale, 20xFemale).
View Product
Rank No. #4
BETAFPV 4pcs BT2.0 550mAh 1S Battery 4.35V 40C/80C Lipo Battery with BT2.0 Connector Compatible for 75-85mm 1S FPV Racing Whoop Drone Quadcopters Like Meteor75 Pro Cetus X Cetus Pro FPV Drone
BETAFPV 4pcs BT2.0 550mAh 1S Battery 4.35V 40C/80C Lipo Battery with BT2.0 Connector Compatible for 75-85mm 1S FPV Racing Whoop Drone Quadcopters Like Meteor75 Pro Cetus X Cetus Pro FPV Drone
  • 【Higher Capacity】Compared with the BT2.0 450mAh 1S battery, BT2.0 550mAh 1S battery updated the capacity to 550mAh. It is capable of delivering a discharge rate of 40C (continuous) and 80C (burst). Greatly improved battery discharge performance.
  • 【Powerful Performance】BT2.0 550mAh 1S Battery has stable current and voltage output and high efficiency. Larger capacity ensures strong power and increases the flight time for the whoop drones.
  • 【Suitable Drone】BT2.0 550mAh 1S lipo battery weighs only 14g/pc with a size of 69.5*16.2*6.3mm, it is suitable for all 1S brushless drones on sale that use BT2.0 450mAh 1S batterie, including Meteor75, Meteor75 Pro. Especially for Meteor75 Pro, pilots will achieve dynamic balance and get stable and consistent power.
  • 【BT2.0 Connector】BT2.0 connector decreased the internal resistance of the connector effectively by upgrading the crimped pins to a 1.0mm banana connector and increasing the cross-sectional area of the 1.0mm banana connector.
  • 【BETAFPV Warranty】BETAFPV comes with a 30 days money back and a month's warranty and with 24 hours of customer service&technical support. Please enter “YOU ORDER” to contact us directly if you have any problems with BETAFPV items.
View Product
Rank No. #5
Upgrade 1S LiPo Battery USB 3.8V/4.35V Charger 6 Channel 1S LiHV Charger for EMAX Tinyhawk Blade Inductrix Tiny Whoop Inductrix FPV Plus Battery Micro JST 1.25 JST-PH 2.0 mCX mCPX Connectors
Upgrade 1S LiPo Battery USB 3.8V/4.35V Charger 6 Channel 1S LiHV Charger for EMAX Tinyhawk Blade Inductrix Tiny Whoop Inductrix FPV Plus Battery Micro JST 1.25 JST-PH 2.0 mCX mCPX Connectors
  • ONLY support LiHV 3.8V/4.35V 1S battery, not for 3.7V/4.20V 1S LiPo battery
  • Support 0.2A/0.6A charge current by switch button （ Suggest using 0.2A if you charge six at the same time and 0.6A if you only do 2）
  • USB interface input suggested range: 5V±5% on 0.5-2.4A, suggested 2.4A or above
  • Charger plug: Micro 1.25 and JST-PH 2.0, AKA mCX and mCPX, Charging max 6 batteries at the same time. ( Need to consider width of battery)
  • The 6 LED lights indicate the charging state of the six channels independently, LED solid indicates charging, LED off indicates full charged.
View Product
Rank No. #6
BETAFPV BT2.0 1S Battery Charger Voltage Tester Type-C Charger V2 4.35V/5V 1A/2A for 1S Lipo RC Battery Like 300mAh 1S 450mAh 1S 260mAh 1S with BT2.0 Connector
BETAFPV BT2.0 1S Battery Charger Voltage Tester Type-C Charger V2 4.35V/5V 1A/2A for 1S Lipo RC Battery Like 300mAh 1S 450mAh 1S 260mAh 1S with BT2.0 Connector
  • 【Updated】Compared with the original BT2.0 battery charger voltage tester, BT2.0 battery charger voltage tester V2 comes with the hidden design of the electric display and charging instructions, which is simple and beautiful
  • 【Type-C Input Port】BT2.0 battery charger voltage tester designed with Type-C input port to replace the USB port. The charging is no longer limited by the socket, provides pilots more charging options
  • 【BT2.0 Battery Charger&Voltage Tester】This BT2.0 battery charger voltage tester is customised for RC battery with BT2.0 connector, can also be charged PH2.0 connector battery when you use PH2.0-BT2.0 adapter cable
  • 【High efficiency】It supports charging 2 lipo batteries with BT2.0 connector at the same time. The charging current is up to 2A, which improves its efficiency and shorten the charging time. Lightweight and easy to carry
  • 【How to Use】When power-off, the test port can be used as a battery tester while another port does not possess any function. When power-on, the red LED means charging while the green LED is fully charged
View Product
Rank No. #7
BETAFPV 8pcs 300mAh 1S Lipo Battery 4.35V LiHV 30C/60C Continuous Discharge with PH2.0 Connector Compatible for 1S RC Racing FPV Whoop Drone Quadcopter with PH2.0 Connector
BETAFPV 8pcs 300mAh 1S Lipo Battery 4.35V LiHV 30C/60C Continuous Discharge with PH2.0 Connector Compatible for 1S RC Racing FPV Whoop Drone Quadcopter with PH2.0 Connector
  • The upgrade version 1S 300mAh battery is the great choice of Tiny Whoop Blade inductrix with the connector plug of JST-PH2.0 PowerWhoop connector.
  • Compared with 260mAh battery, you can get a longer flight time of 5'10'' and more power if you use it on Beta65s BNF.
  • This BETAFPV 1S 300mAh battery's weight is 7.7g with the larger capacity of 30C.
  • Newly developed chemistry 1S Battery, longer flight time and safer charging situation. Safer, higher quality and more powerful rate brings you higher speed flying experience.
  • Please Note: As a FPV battery, Don't over-charge, or over-discharge batteries. Don't put it beside the high temperature condition. Don't throw it into fire. Don't throw it into water.
View Product
Rank No. #8
GNB 4pcs 520mAh 1S LiPo Battery 80C HV 3.8v LiHV Battery JST-PH2.0 Connector Upgraded for Inductrix FPV Racing Drone Like EMAX Tinyhawk 2 etc
GNB 4pcs 520mAh 1S LiPo Battery 80C HV 3.8v LiHV Battery JST-PH2.0 Connector Upgraded for Inductrix FPV Racing Drone Like EMAX Tinyhawk 2 etc
  • 【Upgrade Version】Upgrade 520mAh 1S battery with the connector of JST-PH 2.0 AKA Powerwhoop mCPX is customed for larger brushed whoop drones like EMAX Tinyhawk Brushless Micro Indoor Racing Drone Whoop Inductrix FPV Plus, BETAFPV Beta75 brushed drone, Beta75 Pro brushless drone or Kingkong Tiny 7
  • 【Small Size】Small size of 64 * 15 * 6 mm,The weight of the 520mAh 1S Lipo battery is 13.42g heavier than the 450mAh battery, better performance than it
  • 【Better Performance】This 1S lipo tiny whoop battery is a great choice for anyone flying a Tiny Whoop that uses for brushed whoop motors of any size and brushless 1s whoops
  • 【Longer Flying Time】Newly developed chemistry 520mAh 1S Lipo Battery, high voltage gets longer flight time and safer charging situation
  • 【Caution】As a FPV battery, Don't over-charge, or over-discharge batteries. Don't put it beside the high temperature condition. Don't throw it into fire. Don't throw it into water
View Product
Rank No. #9
1S LiPo Battery USB Charger 3.7V/4.20V 6 Channel 1S LiPo Charger Tiny Whoop Blade Inductrix Micro JST 1.25 JST-PH 2.0 mCX mCPX Connectors
1S LiPo Battery USB Charger 3.7V/4.20V 6 Channel 1S LiPo Charger Tiny Whoop Blade Inductrix Micro JST 1.25 JST-PH 2.0 mCX mCPX Connectors
  • ONLY support LiPo 3.7V/4.20V 1S battery
  • Support 0.2A/0.6A charge current by switch button （ Suggest using 0.2A if you charge six at the same time and 0.6A if you only do 2）
  • USB interface input suggested range: 5V±5% on 0.5-2.4A, suggested 2.4A or above
  • Charger plug: Micro 1.25 and JST-PH 2.0, AKA mCX and mCPX, Charging max 6 batteries at the same time. ( Need to consider width of battery)
  • The 6 LED lights indicate the charging state of the six channels independently, LED solid indicates charging, LED off indicates full charged.
View Product
Rank No. #10
Padarsey Upgraded XT30 Parallel Charging Board for 1S 2S 3S LiPo Batteries Compatible with XT30 JST JST-PH 2.0 Connector LiPo Batteries
Padarsey Upgraded XT30 Parallel Charging Board for 1S 2S 3S LiPo Batteries Compatible with XT30 JST JST-PH 2.0 Connector LiPo Batteries
  • 1) High quality XT30 connector charger board.
  • 2) Support 6 packs XT30 1S or 3S LiPo batteries balance charger(note:do not leave your battery charging with this device unattended).
  • 3) Thicken PCB copper foil, allow security using 20A charging current.
  • 4) Balanced port output line with 18AWG multi-strand silicone line.
  • 5) Equipped with 20A fu-se protection between any two groups of batteries, to handle the large battery pressure.
View Product

Last update on 2023-06-24 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best 1S Battery Connector?

Do you get stressed out thinking about shopping for a great 1S Battery Connector? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 1S Battery Connector, which is why we have assembled a comprehensive list of the greatest 1S Battery Connector available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 1S Battery Connector that you consider buying. Your questions might include the following:

  • Is it worth buying an 1S Battery Connector?
  • What benefits are there with buying an 1S Battery Connector?
  • What factors deserve consideration when shopping for an effective 1S Battery Connector?
  • Why is it crucial to invest in any 1S Battery Connector, much less the best one?
  • Which 1S Battery Connector are good in the current market?
  • Where can you find information like this about 1S Battery Connector?

We’re convinced that you likely have far more questions than just these regarding 1S Battery Connector, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for 1S Battery Connector, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 1S Battery Connector. Make sure that you are only using trustworthy and credible websites and sources.

We provide an 1S Battery Connector buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 1S Battery Connector currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of 1S Battery Connector has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an 1S Battery Connector?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your 1S Battery Connector.
  5. Customer Ratings: Number ratings grade 1S Battery Connector objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 1S Battery Connector.
  7. Product Quality: You don’t always get what you pay for with an 1S Battery Connector, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an 1S Battery Connector is should be an indication of how long it will work out for you.

We always remember that maintaining 1S Battery Connector information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding 1S Battery Connector is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: