The Best 100W Resistor of 2022 – Reviews & Buying Guide
After hours researching and comparing all models on the market, we find out the Best 100W Resistor of 2022. Check our ranking below.
2,174 Reviews Scanned
- Brand new.
- Size: approx. 60mm x 22mm x 15mm.
- 5 styles for your choosing: 1Ohm 1R, 2 Ohm 2R, 4 Ohm 4R, 8 Ohm 8R, 10 Ohm 10R.
- ACOUSTICS; frequency divider and high requirements in bad industrial equipment use.
- Aluminum shell resistance (golden aluminum shell) series, the shell is made of aluminum alloy.
- 🔷Package Content:4 x Wirewound Resistors
- 🔷Good heat dissipation,high insulation,suitable for heat sink installation
- 🔷Body Size:60x15mm/2.36"x0.59"(L*W)
- 🔷Rated Power:100W;Resistance Value:8 ohm
- 🔷Material:Aluminum;Color:Green
- 100W 50ohm Dummy Load RF RFP 1109 Resistor
- Resistance Range: 50 ohms, ± 5%;Power: 100 Watts
- Frequency Range : DC 0-6.0 Ghz,Operating temperature -55 ° ~ + 155 °
- Material: Electrical components
- Package included: 5x RFP1109 Microwave Resistors 50Ω 100W
- 100 Wattage and 10 Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.
- Aluminum Housed. An insulated cover on the wounded wires would block out the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
- This 100W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.
- Board length 2.32 inches(59mm) and two rods with 2mm hole for a soldering connection. Dia. 3.2mm antisymmetric anchoring hole for holding
- Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.
- Fix Resistance : 1R ohms, Power : 100 W watt, Tolerance : 0.05 ±5%
- 2 Pieces Aluminum House Resistors for Heat Dissipation, Suitable for Cooling Plate Installation, Can be Used in Atrocious Environment.
- Dimension : 70x29x15.5mm/2.8x1.1x0.6 inch(L*W*H), Length Without Pin : 11mm, Small Size, high Power Load, Standard and Non-inductive Winding Types
- High Insulating Capacity, Good Performance in Vibration.
- Suitable for Inverter, LED Lights, Speakers, Frequency Divider, Servo Industry, Speaker Equipment and Other Industrial Control, Widely used in Power Supply, Transducer, Elevator, Arena Audio, Tail Light.
- WHAT WILL YOU GET - You will get 4 pcs wirewound resistor, Aluminum case resistor body size is 8.5cm x 1.5cm x 1.5cm/3.36inch x 0.59inch x 0.59inch (LxWxT). Mounting hole dia is 3.4mm/0.13inch. Power rating is 100W, resistance value is 8 Ohm, resistance tolerance is ± 5 percent (J).
- HIGH QUALITY RESISTOR - Aluminum shell resistors are made of high-quality aluminum shell, small size, high power, high precision characteristics, using professional process potting, stable performance, more sturdy when exposed to heat, more resistant to high temperatures.
- MULTIPLE USE - Aluminum housed case resistor are widely used in power supplies, inverters, LED lights, automation equipment, audio, frequency dividers, servo industries and other harsh industrial control environments.
- EASY TO INSTALL - The installation is very simple, just use a screwdriver to install it. There are screw tabs on the aluminum case, you can screw the resistor on a chassis or heat sink for better heat dissipation. Wirewound resistor kit is suitable for cooling plate installation.
- QUALITY SERVICE - Thank you very much for your support. Piutouyar provides 30 days return and exchange service. Customer 100% satisfaction is our top priority. If you have any questions, please feel free to contact us and we will try our best to help you.
- Aluminum Housed Resistor--aluminum housing for heat dissipation, suitable for cooling plate installation, can be used in atrocious environment.
- Rated Power:100W;Resistance Value:2 Ohm
- Mounting type: chassis mounted with Screws. Color: yellow.
- Product Size: 85x20x15mm/3.35"x0.79"x0.59"; Weight: 30.5g/pc; Quantity: 5 pcs
- Adapted To:Nest Hello Doorbell, and transformer, power supply, car LED light, transducer, audio, frequency converter, frequency divider, elevator, arena audio and Other High Requirement Equipment Industry.
- Package Content : 2pcs x Aluminum Housed Resistor
- Resistance Value : 100 Ohm; Power Rating: 100W; Resistance Tolerance: ± 5 percent (J)
- Body Size: 59 x 15mm/ 2. 3" x 0. 6" (L * D); Mounted Hole Size: 3. 3mm/0. 129"; Total Size: 82 x 21 x 17mm/ 3. 2" x 0. 8" x 0. 7" (L*W*T)
- Aluminum case has the screw tabs on it so you can tighten them against a chassis or heat sink for greater heat dissipation. Suitable for cooling plate installation.
- This resistors features with high temperature resistance, strong overload capacity, high weather resistance, high weather resistance, low standard induction resistance and etc.
- 100 Wattage and 500 Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.
- Aluminum Housed. An insulated cover on the wounded wires would block out the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
- This 100W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.
- Board length 2.32 inches(59mm) and two rods with 2mm hole for connection. Dia. 3.2mm antisymmetric anchoring hole for holding, which will fit #2 Screws(or M2.3 nuts)
- Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.
- ♥Package Content - 2 x Aluminum Housed Resistor
- ♥Total Size:81 x 21 x 15mm/ 3.2" x 0.83" x 0.59" (L*W*T)
- ♥Specification - 100 watt power and 2.5Ohm resistance value
- ♥High power load, standard and non-inductive winding types, High insulating capacity, good performance in vibration.
- ♥Aluminum housing for heat dissipation; Suitable for cooling plate installation; They can be used in atrocious environment.
Last update on 2023-04-25 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best 100W Resistor?
Do you get stressed out thinking about shopping for a great 100W Resistor? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 100W Resistor, which is why we have assembled a comprehensive list of the greatest 100W Resistor available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 100W Resistor that you consider buying. Your questions might include the following:
- Is it worth buying an 100W Resistor?
- What benefits are there with buying an 100W Resistor?
- What factors deserve consideration when shopping for an effective 100W Resistor?
- Why is it crucial to invest in any 100W Resistor, much less the best one?
- Which 100W Resistor are good in the current market?
- Where can you find information like this about 100W Resistor?
We’re convinced that you likely have far more questions than just these regarding 100W Resistor, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for 100W Resistor, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 100W Resistor. Make sure that you are only using trustworthy and credible websites and sources.
We provide an 100W Resistor buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 100W Resistor currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of 100W Resistor has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an 100W Resistor?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your 100W Resistor.
- Customer Ratings: Number ratings grade 100W Resistor objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 100W Resistor.
- Product Quality: You don’t always get what you pay for with an 100W Resistor, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an 100W Resistor is should be an indication of how long it will work out for you.
We always remember that maintaining 100W Resistor information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding 100W Resistor is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
