The Best 10S Bms of 2022 – Reviews & Buying Guide

After hours researching and comparing all models on the market, we find out the Best 10S Bms of 2022. Check our ranking below.

2,583 Reviews Scanned

Rank No. #1

DALY 4S-16S BMS 15A to 200A Protection Board with Balance Wire and Temperature Sensor for Lithium Battery Pack（Li-ion 10S 36V,20A）

【DALY BMS】Adopt injection molding sealing process, with dustproof, shockproof, waterproof, anti-accumulation function
【Multi -Function Protection】Over-charging,Over-discharging,Over-current,Temperature and Short-circuit protection functions.--- ISO/ FCC/ RoHS/ PSE/ CE APPROVED
【New Upgrade】Smaller size; Low temperature rise;Consistent Chg/Dischg cuurrent.
【Easy to install】Easy to plug and unplug, which allows you to effortlessly create an electrical connection between the battery pack and the BMS.
【Note】Standard BMS dosen't have communication functions.If you need smart BMS, active balancer, parallel module or other accessories, please contact online customer service.We offer 24-hour one-on-one customer service and lifetime technical support.

Rank No. #2

Bisida 10S BMS 36V 20A Li-ion PCB Protection Board with Balance Wire and NTC, Ten Functional protections, Split Ports, for Lithium-ion Battery Pack (10S 36V 20A)

【Multi -Function Protection】Bisida's BMS has a variety of protection functions, such as over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection, isconnect protection, Voltage balance(passive balance), etc.
【Operating Temperature】Bisida's BMS supports (3.7V) lithium-ion battery charging and discharging in zones from 2.65V to 4.25V, with low temperature protection up to -20°C and high temperature protection up to 70°C. Different voltages and currents have different parameter details. Confirmation required. Please communicate with the seller to confirm accurate data.
【Preparation Before Installation】Before installing the BMS protective board, it is necessary to match the voltage, capacity, and internal resistance (the voltage difference between the battery per section is not higher than 0.05V, the difference between the internal resistance is not more than 5MΩ, and the capacity difference is less than 30mAh). Otherwise the battery pack will not be able to charge.
【Wiring Method】The wiring methods of Split Ports of BMS: B- connection battery pack negative, C- connection charging negative, P- connection output negative. All the positive electrodes are the total positive pole from the battery pack.
【High Quality】Bisida's BMS utilizes top quality (A-level) protective integrated circuit IC, from the solution of Industry car level.BMS manufactured by high quality Mos and IC imported.Support OEM/ODM customization, if you have special needs, you can contact customer service.

Rank No. #3

KOOBOOK 1Pcs 10S 30A 36V Li-ion Cell 18650 Battery Protection BMS PCB Board with Balance Function for Motorcycle Scooter Protection Board

Li-ion cell 18650 battery protection board.Suitable for 10 series cell Li-ion batteries, can be used for 3.7V ternary batteries, manganese acid batteries and cobalt acid batteries.
Has balance function which would ensure each battery cell being fully charged at same time.
Overcharge protection, over-discharge protection and short circuit protection.
With temperature control protection function.
Suitable for electric car, electric power assistant car, skateboard car, inverter, etc.

Rank No. #4

Bisida 10S BMS 36V 50A Li-ion PCB Protection Board with Balance Wire and NTC,Ten Functional protections, Common Port, for Solar Energy Storage, Balance Car Lithium-ion Battery Pack (10S 36V 50A)

【Multi -Function Protection】Bisida's BMS has a variety of protection functions, such as over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection, isconnect protection, Voltage balance(passive balance), etc.
【Operating Temperature】Bisida's BMS supports (3.7V) lithium-ion battery charging and discharging in zones from 2.65V to 4.25V, with low temperature protection up to -20°C and high temperature protection up to 70°C. Different voltages and currents have different parameter details. Confirmation required. Please communicate with the seller to confirm accurate data.
【Preparation Before Installation】Before installing the BMS protective board, it is necessary to match the voltage, capacity, and internal resistance (the voltage difference between the battery per section is not higher than 0.05V, the difference between the internal resistance is not more than 5MΩ, and the capacity difference is less than 30mAh). Otherwise the battery pack will not be able to charge.
【Wiring Method】The wiring methods of Common ports of BMS: B- connection battery pack negative , C- connection charging negative/output negative. All the positive electrodes are the total positive pole from the battery pack.
【High Quality】Bisida's BMS utilizes top quality (A-level) protective integrated circuit IC, from the solution of Industry car level.BMS manufactured by high quality Mos and IC imported.Support OEM/ODM customization, if you have special needs, you can contact customer service.

Rank No. #5

BMS 10S 36V 15A Li-ion Lipolymer 18650 Battery Charge Board for Ebike Scooter

Type: 10S 36V 15A Wiring mode: same port Working power consumption: ≤40uA Main circuit conduction internal resistance: ≤15mΩ Temperature range: 40 to +80°C Disconnection protection: Yes Cable size: 2.0MM pitch/40CM length
Discharge Single battery over-discharge voltage: 2.7V±0.08V Continuous working current: 15A Instant protection current: 80A Overcurrent recovery conditions: charge recovery/disconnect load Short-circuit recovery conditions: charge recovery/disconnect load
Recharge Single battery overcharge voltage: 4.25V±0.025V Continuous charging current: 15A Charger voltage: 56V-60V (recommended)
Over temperature protection Charging over temperature: default 63℃ Discharge over temperature: default 85℃

Rank No. #6

Akozon Protection Board 35A 36V 10S BMS PCB Protection Board with Balance and Heat Dink for 18650 Li-ion Battery Cell

【Scope of application】The 35A 36V 10S BMS PCB Protection Board is suitable for 10-cell lithium-ion batteries, such as ternary batteries, manganic batteries and cobalt acid batteriesbms 36v 10s
【Excellent performance】The charging and discharging interfaces are the same. With balanced heat sink and 10 low internal resistance high power MOS. The continuous discharge current is 35A. Instantaneous discharge current is 100A. It has a balancing function that ensures that each battery unit is fully charged at the same time
【Unique design】wiring is neat, avoiding right-angled lines and curveing the edges; reduce signal vias to avoid signal distortion and cross interference; the wiring identifications clear and easy to understand avoid misconnection
【Necessity】The material characteristics of the lithium battery make it impossible to overcharge, over discharge, overcurrent, etc. during use, so choosing the right protection board and applying it properly is critical to the battery life.This protection board provides stable various charging and discharging protection functions such as overcharge protection, overdischarge protection, overcurrent protection and short circuit protection
【Note】Before installing the protection board, the batteries must be matched well. The better the battery consistency is, the farther the running distance is, the best performance of the protection board is; the battery should be connected in parallel and then in series.Make sure the welding is correct (18650 battery with nickel spot welding, other batteries with solder welding), do not use screws to avoid burning the IC of the protection board

Rank No. #7

Bisida 10S BMS 36V 15A Lithium Ion Protection Board with Wire and NTC, Split Ports, Multiple Protection, Battery Management System for Scooter Batteries Lithium-ion Battery Pack

【Multiple Protection】Bisida 36V BMS has a variety of protection functions, such as Overcharge Protection, Overdischarge Protection, Overcurrent Protection, Short circuit Protection, Temperature Protection, Disconnection protection.
【Operating Temperature】Bisida BMS Lithium Ion supports (3.7V) lithium-ion battery charging and discharging in zones from 2.65V to 4.25V, with low temperature protection up to -20°C and high temperature protection up to 70°C. (Different voltages and currents have different parameter details. Confirmation required. Please communicate with the seller to confirm accurate data)
【Wiring Method】The wiring methods of Split Ports of BMS: B- connection battery pack negative, C- connection charging negative, P- connection output negative. All the positive electrodes are the total positive pole from the battery pack
【Notice】Before installing the BMS protective board, it is necessary to match the voltage, capacity, and internal resistance (the voltage difference between the battery per section is not higher than 0.05V, the difference between the internal resistance is not more than 5MΩ, and the capacity difference is less than 30mAh). Otherwise the battery pack will not be able to charge.
【High Quality】Bisida's BMS utilizes top quality (A-level) protective integrated circuit IC, from the solution of Industry car level.BMS manufactured by high quality Mos and IC imported.Support OEM/ODM customization, if you have special needs, you can contact customer service.

SaleRank No. #8

1000W Lithium Battery Board 10S 36V 30A PCB Battery Protection Board with Balance Function

The board is suitable for 10 series connected lithium-ion batteries, which can be used for 3.7V ternary batteries, manganese- batteries, cobalt- batteries.
The lithium battery board provides a variety of functions, the board supports overcharge , overdischarge , overcurrent and short circuit .
The board has the function of ensuring that each battery is fully charged at the same time, which saves time and effort.
The board is widely used in electric cars, electric assisted vehicles, scooters, inverters and other tools.

SaleRank No. #9

DALY Smart 10S BMS 36V 40A with WiFi Module and CAN 485 Communication Protection Board for Li-ion Lithium Battery Pack(Li-ion 10S 36V，40A)

【Multiple Protection】Overcharge Protection; Overdischarge Protection; Overcurrent Protection; Short circuit Protection; Temperature Protection;Waterproof Protection.
【New Upgrade】Smaller size; Parallel protection; Pre-charging function; 100mA passive equalization current; Low temperature rise; Working condition indicator;Consistent Chg/Dischg cuurrent.
【Smart BMS】With the WiFi module, lithium batteries can be remotely monitored through the Internet, regardless of the distance.When the BMS detects any abnormality in the battery pack, it will send alert via the smartphone app.
【DALY BMS】Multiple communication functions+ expansion function ports,CAN, RS485, dual UART communication interfaces,rich expansion applications.If you need Touch Screen,active balancer, parallel module or other accessories, please contact online customer service.
【Quality Guarantee】We provide 24-hour one-on-one customer service and technical support.If you have any questions,please feel free to contact us.--- ISO/ FCC/ RoHS/ PSE/ CE APPROVED

Rank No. #10

BMS 10S 30A 36V Lithium Battery Charge Board with Protection Balancer

For 3.7V Ternary , Lithium cobaltate , Lithium manganese oxide battery Suitable power and voltage : 36V ,less than 1000W
Over charge protection Over discharge protection Over current protection
Output short circuit protection Over temperature protection (discharge max temperature 75 degree ,charge min temperature -7 degree)
Working current : 30A (max) Continuous working current : 25A (max) Over-discharge protect voltage : 2.6V Over-charge protect voltage : 4.25V Charge current : 10A
Balance charge voltage : 4.2V

Last update on 2025-07-05 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best 10S Bms?

Do you get stressed out thinking about shopping for a great 10S Bms? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 10S Bms, which is why we have assembled a comprehensive list of the greatest 10S Bms available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 10S Bms that you consider buying. Your questions might include the following:

Is it worth buying an 10S Bms?
What benefits are there with buying an 10S Bms?
What factors deserve consideration when shopping for an effective 10S Bms?
Why is it crucial to invest in any 10S Bms, much less the best one?
Which 10S Bms are good in the current market?
Where can you find information like this about 10S Bms?

We’re convinced that you likely have far more questions than just these regarding 10S Bms, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for 10S Bms, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 10S Bms. Make sure that you are only using trustworthy and credible websites and sources.

We provide an 10S Bms buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 10S Bms currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of 10S Bms has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an 10S Bms?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your 10S Bms.
Customer Ratings: Number ratings grade 10S Bms objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 10S Bms.
Product Quality: You don’t always get what you pay for with an 10S Bms, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an 10S Bms is should be an indication of how long it will work out for you.

We always remember that maintaining 10S Bms information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding 10S Bms is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

The Best 10S Bms of 2022 – Reviews & Buying Guide

How Do You Buy The Best 10S Bms?

Related Post: