The Best 2.2Kw Spindle of 2022 – Reviews & Buying Guide
After hours researching and comparing all models on the market, we find out the Best 2.2Kw Spindle of 2022. Check our ranking below.
2,309 Reviews Scanned
- 【Package Include】: ①1 x 2.2KW Square Air Cooled Spindle Motor ②1 x 2.2KW VFD with cable
- 【2.2KW Spindle Motor】: ①This is a 220V-2.2KW air-cooled 6A spindle motor come with a ER20 nut and collet. Frequency is 400HZ, precision tapered bore is less than 0.005mm and runout off is Less than 0.01mm. ②Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the spindle does not support reversal.
- 【2.2KW VFD】①Technical Parameters - Control Model: SPWN. Power: 2.2KW. Input:1 or 3 phase 220V 0-50Hz/60Hz. Output:3phase 220V 0-400Hz. Communication Control: RS-485. Vibration: below 0.5G. Operation Temperature: -10 ~40℃. Five-Digits Display and Status Indicator Lamp display frequency, current, revolution, voltage, counter, temperature, foward or reverse running, fault, ect.
- ②Multi-Protection Functions - Including overload protection, FUSE broken-motor stops protection, over-voltage / low-voltage protection, restarted by frequency track after instantaneous stop, anti-stall during acceleration/deceleration operation, electronic circuit protection. And many other protection functions, such as over-heat protection, restriction of reverse running, direct start after power on, fault reset, parameter lock PID, one-drive-more, ect.
- 【How to Connect Spindle Motor and VFD】The spindle motor's aviation plug marked with number U1, V1, W1. Number U1, V1, W1 port are connected with inverter's port U, V, W respectively.
- 【PACKAGE LIST】-1pcs 110V 2.2KW air Cooled Spindle Motor +1pcs 110V 2.2KW VFD + 1pcs Φ80mm Clamp Mount +13pcs ER20 Collet(1mm-13mm) +10Pcs Nano Blue Coat End Mill CNC Router Bits, 0.8-3mm, 1/8" Shank+ aviation wire(We offer 2 meters 18AWG wire in this kit, if you need longer wire, pls buy it in our store)+power wire+2pcs wrenches
- 【EASY AND FAST TO ASSEMBLE 】-The VFD had been pre-programmed for basic parameters , you don't need to make extra setting up.We offer fully complete accessories including pre-soldered aviation wire with connector and power wire, It will take just 5 minutes to install all and make all functions running.
- 【SPINDLE ADVANTAGE 】- Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor; Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process; Runout off less than 0.005mm that 10 times precision beyond normal spindle motor.
- 【WIDE APPLICATION】-Kinds of engraving and drilling material :Kinds of drilling and engraving materials , such as plastics, soft aluminum,brass, acrylics, PVC, PCB, wood,plywood, nylon.
- 【WARRANTY ASSURANCE】-We have 20 years manufacturing experience , pls contact us for any question or problem. We are proficient in customizing products according to various requests and applications. If you have special inquiry, pls let us know.
- 【Package Include】1x 220V-2.2KW VFD--1x2.2KW Φ80mm 24000RPM ER20 Spindle--1x 220V-75W Water Pump --1x 80mm spindle clamp--1x5m horse
- Easy to connect the motor/easy to use//basic parameters have been set, you can directly connect and run when receiving the kit
- The kit has the advantages of low noise and low electromagnetic interference
- VFD drive supports remote potentiometer speed control and remote switch start/stop
- The spindle adopts P4 imported bearings with strong torque force,high precision
- ✅【How to Connect The Spindle Motor】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected with inverter's port U, V, W respectively. Number 4 is the ground wire, no wiring is required.
- ✅【Simple Introduction】This is a 220V-2.2KW water-cooled 8A Φ 80x213mm spindle motor come with a ER20 nut and collet. Frequency is 400HZ, 0.003--0.005 accuracy and runout off is less than 0.01mm. It is mainly suitable for non-metallic engraving,such as wood carving/engraving machine, advertisement engraving machine,CNC machine.
- ✅【Speed of The Spindle Motor】0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the spindle only can rotate clockwise but not counterclockwise.
- ✅ ISO9001 quality certifications which means this item is the top quality item. In extremely high speed working environment, ordinary bearing can not ensure this high rotate speed for using for long time.
- ✅【1 Year Warranty】We offer 1 year warranty, if you have any questions about the product, please contact the seller for a satisfactory solution.
- 【BASIC INFORMATION】- 2 Poles, Collet ER20,Voltage: 110V ,Power: 2.2KW, Frequency: 400 Hz, Current: 10A, Speed: 5000-24000 RPM, weight:17.6lbs,,Runout off: less than 0.005 mm.
- 【EASY AND FAST TO ASSEMBLE 】-It includes aviation wire,power wire and 2pcs wrenches to connect spindle motor to VFD. The appearance design of square spindle motor have 2 sides mounting holes to fix. It will take just 3 minutes to install all and make all functions running.
- 【SPINDLE ADVANTAGE 】- Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor; Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process; Runout off less than 0.005mm that 10 times precision beyond normal spindle motor.
- 【WIDE APPLICATION】-Kinds of drilling and engraving materials , such as plastics, soft aluminum,brass, acrylics, PVC, PCB, wood,plywood, nylon.
- 【WARRANTY ASSURANCE】-We have 20 years manufacturing experience , pls contact us for any question or problem. We are proficient in customizing products according to various requests and applications. If you have special inquiry, pls let us know.
- 【Simple discreption】This is a 220V 2.2KW Square air-cooled spindle motor come with a ER20 nut and collet. Current is 6A, frequency is 400HZ, precision tapered bore is less than 0.005mm and runout off is Less than 0.01mm.
- 【Spindle speed】The speed of the spindle motor is 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lowered than 9000 rpm during the use of the spindle. Also ,it should be noted that the spindle only can rotate clockwise but not counter-clockwise.
- 【How to wring it to Inverter】The spindle’s terminal U1, V1, W1 are connected separately to inverter’s terminal U, V,W. Connect any 2pin terminal "R", "S" or "T" of the inverter to "220VAC".
- 【Note】Before driving, turn the shaft by hand first. The temperature's rise caused by the high-speed rotation of the spindle motor can be eliminated by the coolant circulation system.
- 【Main application】Wood, Aluminum, Glass, PVC industry.The Spindle motor is mainly suitable for NON-metallic engraving.
- 【4pcs Powerful Bearings】Adopts imported P4 bearings with large torque ,high accuracy, precision, and durability. Significantly improve the hardness and anti-rust performance.
- 【24000RPM High Speed】Because it is a high-speed motor, it is recommended to run at 8000-24000RPM, if it is a low speed rotation, it will produce a relatively strong current
- 【Basic function】It is mainly suitable for non-metallic engraving, such as wood carving/engraving machine, advertisement
- 【High Precision Collet】ER20 Standard Collet, The collet of the CNC spindle is quenched with manganese steel, and the runout is less than 0.005 mm, which has high precision and is not easy to break the knife, increasing the stability of the working process. Dynamic balance technology can effectively reduce noise during use.
- 【Low Noise】The dynamic balance technology can effectively reduce the noise during use. The scientifically designed water circulation system has a better heat dissipation effect to ensure smooth operation.
- 【Package Include】: 1 x 2.2KW 220V Air Cooled Spindle Motor + 1 x 2.2KW VFD Inverter 220V + 1 x 80mm Spindle Motor Mount(with 3pcs screws)
- 【2.2KW Spindle Motor】: ①This is a 220V-2.2KW air-cooled 8A Φ 80x195mm spindle motor come with a ER20 nut and collet. Frequency is 400HZ, 0.005 accuracy and runout off is Less than 0.01mm. ②Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the spindle motor only can rotate clockwise but not counterclockwise.
- 【2.2KW VFD Parameters】Control Model: SPWN. Power: 2.2KW. Input:1 or 3 phase 220V 0-50Hz/60Hz. Output:3 phase 220V 0-400Hz. Communication Control: RS-485. Vibration: below 0.5G. Five-Digits Display and Status Indicator Lamp display frequency, current, revolution, voltage, counter, temperature, foward or reverse running, fault, ect.
- 【How to Connect Spindle Motor and VFD】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected separately with inverter's port U, V, W. Number 4 is the ground wire, no wiring is required.
- 【80mm Spindle Motor Mount】Material is aluminum,surface sandblasted. Compared with the aluminium profile fixture,the accuracy is much eavier, much higher, and it is hard to deform. Fit for CNC 80mm diameter spindle motor.
- 【4pcs Powerful Bearings】Adopts imported P4 bearings with large torque ,high accuracy, precision, and durability. Significantly improve the hardness and anti-rust performance.
- 【24000RPM High Speed】Because it is a high-speed motor, it is recommended to run at 8000-24000RPM, if it is a low speed rotation, it will produce a relatively strong current
- 【Basic function】It is mainly suitable for non-metallic engraving, such as wood carving/engraving machine, advertisement
- 【High Precision Collet】ER20 Standard Collet, The collet of the CNC spindle is quenched with manganese steel, and the runout is less than 0.005 mm, which has high precision and is not easy to break the knife, increasing the stability of the working process. Dynamic balance technology can effectively reduce noise during use.
- 【Low Noise】The dynamic balance technology can effectively reduce the noise during use. The scientifically designed water circulation system has a better heat dissipation effect to ensure smooth operation.
- Technical Parameters: Spec: φ3.15 x 8.5 in (Diameter: 8 cm x Length: 21.5 cm); Power: 2.2 KW; Voltage: 220V~250V; Current: 8A; Collet Size: ER20; Bearings: 3 bearings; Frequency: 400 Hz; Speed: 8000-24000 R/min; Runout off: less than 0.005 mm. The CNC spindle motor is mainly used for engraving machine or used with frequency converter.
- ER20 Standard Collet: The collet of the CNC spindle is quenched with manganese steel, and the runout is less than 0.005 mm, which has high precision and is not easy to break the knife, increasing the stability of the working process. Dynamic balance technology can effectively reduce noise during use.
- Powerful Bearing: The water cooled spindle motor adopts imported bearings with high accuracy, precision, and durability. Significantly improve the hardness and anti-rust performance.
- Low Noise & Heat Dissipation: The dynamic balance technology can effectively reduce the noise during use. The scientifically designed water circulation system has a better heat dissipation effect to ensure smooth operation.
- Fine Workmanship: The body of the CNC router spindle is made of high-quality stainless steel, equipped with a pure copper rotor. The upgraded version of the aviation plug can ensure the stability and security of the input power, and the dust cover prevents dust from entering the body.
Last update on 2025-03-23 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best 2.2Kw Spindle?
Do you get stressed out thinking about shopping for a great 2.2Kw Spindle? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 2.2Kw Spindle, which is why we have assembled a comprehensive list of the greatest 2.2Kw Spindle available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 2.2Kw Spindle that you consider buying. Your questions might include the following:
- Is it worth buying an 2.2Kw Spindle?
- What benefits are there with buying an 2.2Kw Spindle?
- What factors deserve consideration when shopping for an effective 2.2Kw Spindle?
- Why is it crucial to invest in any 2.2Kw Spindle, much less the best one?
- Which 2.2Kw Spindle are good in the current market?
- Where can you find information like this about 2.2Kw Spindle?
We’re convinced that you likely have far more questions than just these regarding 2.2Kw Spindle, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for 2.2Kw Spindle, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 2.2Kw Spindle. Make sure that you are only using trustworthy and credible websites and sources.
We provide an 2.2Kw Spindle buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 2.2Kw Spindle currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of 2.2Kw Spindle has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an 2.2Kw Spindle?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your 2.2Kw Spindle.
- Customer Ratings: Number ratings grade 2.2Kw Spindle objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 2.2Kw Spindle.
- Product Quality: You don’t always get what you pay for with an 2.2Kw Spindle, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an 2.2Kw Spindle is should be an indication of how long it will work out for you.
We always remember that maintaining 2.2Kw Spindle information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding 2.2Kw Spindle is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.