The Best 3D Printer Screen of 2022 – Reviews & Buying Guide

After hours researching and comparing all models on the market, we find out the Best 3D Printer Screen of 2022. Check our ranking below.

2,024 Reviews Scanned

Rank No. #1

Creality Official Ender 3 V2 Screen Kit Intelligent 4.3 inch Color HD LCD Display Screen Replacement Screen Upgrade Kit with Mass Memory User Friendly Interfacefor Ender 3 V2 3D Printer

It is 100% Creality original Ender 3 V2 color screen kit.
【Mass memory】It provides sufficient storage space, and supports to store pictures in JPEG compression mode, further increasing the number of stored files.
【User-friendly UI interface】Brand-new screen allows easier operation via its simple UI interface.
【Modular design Easy installation】The screen is tilted to make a wide vision and easy to operate. It can be fixed directly on the 3D printer base.
If you have any question about this screen kit, please free to contact us!

Rank No. #2

BIGTREETECH Mini12864 V2.0 LCD Graphic Smart Display Control Board with Adapter and Cable for Ender-3 VORON 2.4 Prusa-i3 3D Printer RAMPS 1.4 RepRap 3D Printer Mendel Prusa Arduino

The Mini12864 display panel has RGB multi-color backlight and can support 8 RGB, which is even more cool
With a SD card base on back, put slicing file into the SD card and select the file on the LCD, then can be printing
Product comes encoder parameter adjustment can be achieved, and the file selection print
Plug and play on the RAMPS, but need to modify the firmware to support
Do not worry about the problem of after-sales, if there is any need, get in touch with us, we will help you solve it

Rank No. #3

Sovol 3D 2 Pack Stick On Gasket, Screen Protector for 5.5" & 6.1" 3D Resin Printers, Universal Protection from Resin Spill, Fits for Mars Series ANYCUBIC Photon QIDI Tech 5.5s - Resin Resistant

[Keep your printer safe from resin spills] - Our stick on gasket protects the internals of your printer from damage by sealing the gap between the LCD and printer chassis and avoid expensive repairs. It also helps keep the FEP film from creating suction and pulling on the LCD, which can dislodge it while attempting to remove the vat.
[Suitable for both 5.5" & 6" resin printer] – Works on multiple 5.5 inch or 6.1 inch LCD resin printers. Compatible with EPAX X1, Elegoo Mars/Mars Pro/Mars C/Mars 2/Mars 2 pro, Anycubic Photon/Photon-S, Prusa LD-002R, QIDI Tech Shadow 5.5 (NOT 6.0) & Longer Orange 30 UV Resin Printers. Please note: You must re-level your build plate per the instructions included after installation.
[Extra durable] - Made of high-quality polypropylene, our gasket is built to last. It is resin-proof and safe from tears and abrasion, while remaining very flexible.
[Save your prep time] - Two-piece backing ensures easy installation. Now you're no longer forced to tidy up your printer right after a print. With our stick on gasket, you will have peace-of-mind knowing that your printer internals and LCD are protected from resin leaks.
[High light transmittance] - It would not affect the performance of LCD screen. Any questions or issues about sovol products please feel free to contact us.

Rank No. #4

Mach5ive Screen Saver- Clear Screen Protector for Resin 3D Printers (5.5" & 6.x Screens - 3 Pack, Clear)

SAVE YOUR SCREEN! The Mach5ive Screen Saver is your clear screen protection solution for resin 3D printers with smaller screens. Protects your screen and printer internals from the damage that a resin spill can cause. Seals the gap between the screen and printer chassis. You must re-level your build plate per the instructions included after install. You may need to increase your exposure times, as the Screen Saver will allow greater than 93% of the light through.
SAVE TIME WITH PREP - Now you're no longer forced to tidy up your printer right after a print. Apply our Screen Saver and have peace-of-mind knowing that your printer internals and LCD are protected from resin leaks.
QUALITY PROTECTION – Why take the risk of damaging your printer internals, LCD or FEP film? Avoid expensive repairs by applying our Screen Saver and protecting your printer. Several sizes are available!
EXTRA DURABLE - Made of high-quality PET, our Screen Saver is built to last. At .13 mm thick installed, it is resin-proof and safe from tears and abrasion, while remaining very flexible. Kit includes 3 Screen Savers, instructions, cleaning cloth, alcohol wipe, & squeegee.
IMPORTANT - Installation requires some skill. Although a bubble-free installation is ideal, a few small bubbles will not affect your prints. Bubbles around the perimeter of the screen, where it does not light up, is normal. Peeling off the protective film may generate static electricity and attract dust. Install in a clean environment. Protectors are designed to be larger than the screen in order to prevent resin seepage into the machine. PLEASE CONTACT US FIRST FOR HELP with any issues.

Rank No. #5

M5C Display Screen Kit, 2.4 inch 240×320 TFT, Compatible with 500 mm/s High-Speed Printing for M5C 3D Printer, Customize Case with Fun New Models, See Detailed Printing Info in Real-Time, User-Friendl

See Detailed Printing Info in Real-Time
2.4 inch 240×320 TFT
Accessorize Your M5C Display With Fun New Models

SaleRank No. #6

Creality Sonic Pad Based on Klipper Firmware 7 Inch Touch Screen 3D Printer Smart Pad with Higher Printing Speed for Creality Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro FDM Ender 3D Printers

【Speed Up Printing While Keep the Quality】Creality sonic pad uses precision-oriented algorithms to command the motors for higher printing speed. The built-in input shaper fanction will mitigate oscillation during high-speed printing and smooth out ringing, thus keeping the model quality.
【Highly Integrated with Strong Computing Power】Beneath the large 7-inch touch control screen, the Klipper firmware runs in full swing on a powerful 64-bit computing platform. With software-hardware integration, you will get stunning performance.
【Wide Compatibility】Sonic pad based on klipper firmware can connect to almost any ender 3D printer on the market via a USB cable. By updating the system, it has been pre-configured for Ender-3 V2/Neo,Ender-3 Max/Neo, Ender-3 Pro,Ender-3 Neo,Ender-3 S1,Ender-3 S1 Pro,Ender-3 S1 Plus,Ender-5 S1,Ender-5 Pro,Ender-5 Plus, Ender 2 Pro,Ender 5/6/7,CR-M4,CR-6,CR-10 Series 3D Printer, so you can get it going in seconds. The rest of Compatible Creality 3d printers will catch up soon.
【Intuitive Model Preview】Creality 3d printer smart pad supports G-code model preview when slicing with the Creality Print, Ultimaker Cura, Pursa Slicer and Super Slicer.
【Rich Expansion Interface】For this fdm ender 3d printers touchscreen, USB port x4, RJ45 port x1 and WiFi module x1 are included. Connect USB camera can achieve real-time monitoring and time-lapse photography function. (Note: USB camera is not included)

Rank No. #7

Anycubi Photon MONO 2 Screen Protector,Original 3D Printer Protective Film 5Pcs Compatible with 6.6 inch LCD SLA UV Resin 3D Printers-Thickness 0.1mm-ONLY for Photon MONO 2

【Application】:100% ANYCUBIC original parts,compatible with 6.6inch Resin 3D Printers.ONLY Works perfectly on Anycubic Photon MONO 2;
【Better Adhesion】:Official ANYCUBIC screen protector has a perfect adhesion for screen.
【Good Protection】:The screen protector can not only protect the screen from being scratched but can also prevent resin leakage from contaminating the screen due to damage to the release film.
【High Transmittance】: 96.9% light transmittance which ensures high stability of UV lighting and won’t affect the printing result.
【Product Size】: 220*146mm ; Thickness: 0.1mm

Rank No. #8

KOYOFEI 5PCS Screen Protector for Mars 3 Pro LCD Resin 3D Printer, Screen Protective Film for Elegoo Mars 3, 3Pro 6.66 inch Monochrome LCD Resin 3D Printer

Screen Protector: 6.66-inch screen protector can just cover the LCD screen of the 6.66 inch resin 3D printers, preventing the resin from contaminating the screen when FEP damaged, adding or recycling resin, thereby prolonging the use time of the LCD screen and saving the cost of replacing the screen.
Light transmittance of more than 95%: The light transmittance of the 6.66 screen protective film is above 95%, which will not affect the 405nm wavelength of ultraviolet rays through the protective film and curing the resin, which can maintain the printing accuracy of the 3D printer.
High quality screen protectior: Screen Protector is made of high-quality PET material imported from Japan. The double-sided lamination ensures that it will not be scratched before use, and the edge will not produce white edges after being posted. Therefore, it will not affect the print volume after installation, and only needs to be re-leveled.
Included tool kit: This kit comes with a tool kit for easy installation of the protective film, you can refer to the installation steps in the picture to operate, and use the scraper to avoid air bubbles during the installation process.
Compatible Models: Protective film compatible with Elegoo Mars 3 4K, Mars 3 Pro (This kit is not compatible with Photon Mono 2) LCD Resin 3D Printer.

Rank No. #9

BIGTREETEHCH TFT35 E3 V3.0.1 Touch Screen Display with Two Working Modes Compatible 12864 LCD Display WiFi for Ender 3 CR-10 SKR MINI E3 V3.0/SKR V1.4 Turbo Octopus V1.1 SKR 3 3D Printer Control Board

Main Control Chip: BIGTREETECH TFT35 E3 V3.0.1 touch screen display adopts ARM Cortex-M3 series GD32F205VCT6 master controller with 32-bit main frequency of 120MHz, it is designed for ENDER 3 3d printer especially, which can perfectly replace the original LCD screen of Ender 3 Printer. When running Klipper, only support 12864 mode. If want to touchscreen, can choose HDMI5 V1.2 Klipper touchscreen.
Dual Modes: BTT TFT35-e3 v3.0 display touch screen two working modes, support UART serial port screen mode and 12864 screen mode support two printing Modes：SD Card and U disk with one catering the Marlin-style interface, and the other offering a full colour touch interface with the option to switch between them within seconds while the machine is running.
Multi function expansion interface: BIGTREETECH TFT35 E3 V3.0.1 is a 3D printer upgrade that offers both SD card and USB functionality, reserve the extension port of filament breaking detection,automatic shutdown after printing，WIFI function can be realized by external WIFI module through WIFI port.
Wide Compatiblity: Not only is this BTT TFT35 E3 V3.0.1 smart display compatible with Ender series printers,but can also be used on a host of other 3D Printers too, as long as you are willing to print your own enclosure for other display panel styles,compatible with SKR MINI E3 V3.0/SKR MINI E3 V2.0/Octopus/SKR V1.4 Turbo/SKR 3/SKR 3 EZ/SKR Pro V1.2 etc motherboard
Satisfying After-sales Services: If you have any questions regarding Bigtreetech TFT35-E3 V3.0.1 touch screeen, please writer to us on Amazon. Our technical supports team will help you solve it

Rank No. #10

Aladrs 5pcs Screen Protector for Mono 2, 3D Printer Screen Protector Film for Anycubic Photon Mono 2 6.6inch 4K Resin 3D Printer-Thickness 0.1mm

【Screen Protector 】: This screen protector can just cover the LCD screen of the 6.6inch resin 3D printers, preventing the resin from contaminating the screen when FEP damaged, adding or recycling resin, thereby prolonging the use time of the LCD screen and saving the cost of replacing the screen.
【Light transmittance】:more then 95% light transmittance which ensures high stability of UV lighting and won’t affect the printing result.
【Quanlity Protection】: This film is Made of high quality PET with 0.1mm thickness. The PET is with double-sideed lamination ensures it will not easy scratched. And the film is also resin-proof and safe from tears and abrasion, while remaining very flexible.
【High Quality】:The screen protector is made of imported high-quality PET material.The PET is with double-sideed lamination ensures it will not easy scratched.Therefore, the print volume will not be affected after installation, and it only needs to be re-leveled.
【Compatible Models】: This Protective film is suitable for ANYCUBIC Photon Mono 2 LCD Resin 3D Printers.

Last update on 2024-01-14 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best 3D Printer Screen?

Do you get stressed out thinking about shopping for a great 3D Printer Screen? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 3D Printer Screen, which is why we have assembled a comprehensive list of the greatest 3D Printer Screen available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 3D Printer Screen that you consider buying. Your questions might include the following:

Is it worth buying an 3D Printer Screen?
What benefits are there with buying an 3D Printer Screen?
What factors deserve consideration when shopping for an effective 3D Printer Screen?
Why is it crucial to invest in any 3D Printer Screen, much less the best one?
Which 3D Printer Screen are good in the current market?
Where can you find information like this about 3D Printer Screen?

We’re convinced that you likely have far more questions than just these regarding 3D Printer Screen, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for 3D Printer Screen, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 3D Printer Screen. Make sure that you are only using trustworthy and credible websites and sources.

We provide an 3D Printer Screen buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 3D Printer Screen currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of 3D Printer Screen has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an 3D Printer Screen?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your 3D Printer Screen.
Customer Ratings: Number ratings grade 3D Printer Screen objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 3D Printer Screen.
Product Quality: You don’t always get what you pay for with an 3D Printer Screen, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an 3D Printer Screen is should be an indication of how long it will work out for you.

We always remember that maintaining 3D Printer Screen information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding 3D Printer Screen is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

The Best 3D Printer Screen of 2022 – Reviews & Buying Guide

How Do You Buy The Best 3D Printer Screen?

Related Post: