The Best Active Poe Splitter of 2022 – Reviews & Buying Guide
After hours researching and comparing all models on the market, we find out the Best Active Poe Splitter of 2022. Check our ranking below.
2,868 (random num) Reviews Scanned
Rank No. #1
Bawofu Active PoE Power Over Ethernet Splitter Adapter 48V to 12V, 5.5x2.1mm DC, IEEE 802.3AF/at Compliant 10/100Mbps PoE Splitter with 12V Output for Surveillance Camera CCTV & VoIP Phone, 2 Pack
- Adaptive 10/100Mbps network data transmission: This poe splitter compatible with IEEE802.3-AF/AT transport protocol uses six types of all-copper cables for real-time data transmission without jamming
- Input Power Voltage: Power Over Ethernet Splitter Adapter for Security Camera CCTV Surveillance DC44-57V from poe switch or poe injector, deliver power up to about 100m (328 feet).The maximum power consumption is 15.4W, and the POE input voltage range is 48V-57V. 5.5x2.1mm DC Plug Cable. DC Jack(Male) output DC voltage is 12V and the maximum output DC current is 1.2A
- Plug-and-Play - Require no configuration: A simple solution to expand your network to where you wish to place network devices but has no power outlet, powerline ethernet adapter
- Easy to install and operate: Any device which connects to a network via an ethernet cable,needs only one cable connection to power and operate if you use PoE.POE makes installation simpler and less expensive, helps to scaling up networks and adding new connections and devices. POE splitter can make non-POE device works via POE.Say goodbye to the wiring annoyance of multiple lines by simply connecting one network cable to transmit data and power at the same time
- Typical application areas include malls, hospitals, companies, parking lots, urban streets, residential buildings, etc. M2C mode sales, the powerful production capacity of background factories, while ensuring capacity and quality, directly give the buyer (consumers), so that the buyer can buy high performance-price ratio products, so that the buyer can buy with confidence
Rank No. #2
Active PoE Splitter - Power Over ethernet Splitter Adapter, 48V to 12V, IEEE 802.3af Compliant, 10/100Mbps PoE Splitter for Surveillance Camera, WAP and VoIP Phone, up to 100m, 2 Pack
- Output Power: 12V/1A, 15.4W, full IEEE 802.3af compliant. Widely use with most 12-volt devices.
- Input Power Voltage: DC 44-57V standard POE switches, overvoltage protection.
- Data Rate: 100/100Mbps; DC Jack: 5.5*2.1mm.
- Plug and play, no configuration required; Available with IP camera, IP phone, wireless AP and other 12V Non-POE devices.
- Package content: 2 x PoE splitters. Ipolex products are thoroughly tested to ensure premium quality. We also provide exclusive FREE 1-year warranty and lifetime technical support. If you have any further queries, please do not hesitate to contact us. We will reply as soon as possible. 🙂
Rank No. #3
DSLRKIT Active PoE Splitter 48V to 5V 2.4A USB Type A Female 802.3af Power Over Ethernet
- Active PoE Splitter Power Over Ethernet with USB TYPE A Female
- Compliant with IEEE802.3af
- With 2.5KV isolation
- The product must be used in conjunction with a PoE switch or PoE injector
- Output voltage of 5.2V, the maximum output current of 2.4A. Suitable for the Tablet PC or mobile and other DC5V device
Rank No. #4
DSLRKIT DC 5V 2.4A Active PoE Splitter Power Over Ethernet 802.3af 5.5x2.1mm
- 5.5x2.1mm DC Plug Active PoE Splitter，48V to 5V 2.4A (Max. 12watt)
- 10/100Mbps Ethernet，Compliant with IEEE802.3af，With 2.5KV isolation
- This POE Splitter is suitable for household IP camera with DC 5V power (as the kind in the photo of the instruction),it does not suit equipments with DC 12V power
- Some managed intelligent Gigabit PoE switches need to set the LAN port of this connected splitter to Manual 100Mb/s mode in the management Settings of switches, otherwise the power supply may work normally but the network connection will not work, such as the following switch, HP 3500-48G-PoE yl Switch (J8693A)
- Please note that Philips changed the size of the DC socket on the Bridge. If you have a v1 Bridge the DC socket is 5.5×2.1mm. If you have a v2 Bridge the DC socket is 5.5×2.5mm, this splitter is not compatible.
Rank No. #5
DSLRKIT 2.5G Gigabit Active PoE Splitter 12V 2A 24watt DC 5.5x2.1mm Ethernet 802.3AT
- The POE splitter must be connected to the POE switch, POE midspan or 48V~52V POE injector for proper operation
- Output power Max.12Watt (DC12V1.25A) when used with the IEEE802.3af standard PoE switch(or 802.3af PoE injector)
- Output power Max.20Watt (DC12V2A) when used with the IEEE802.3at standard PoE switch (or 802.3at PoE injector)
- Output power Max.20Watt (DC12V2A) when used with the DSLRKIT Non-standard 48V~52V Passive PoE switches (or 48V~52V Passive PoE injector)
- 5.5x2.1mm DC OUTPUT 12V 2A/24Watt
Rank No. #6
ANVISION Gigabit PoE Splitter, 48V to 5V 2.4A Micro USB Ethernet Adapter, Compatible with Raspberry Pi 3B+, IP Camera and More
- 5V DC power output ( 2.4A / 12watts Max.), 10/100/1000Mbps ethernet data rate, IEEE 802.3af compliant
- Input Power Voltage: DC44-56V from poe switch or poe injector, deliver power up to about 100m (328 feet)
- Plug-and-Play - Require no configuration, a simple solution to expand your network to where you wish to place network devices but has no power outlet
- Works with Raspberry Pi 3B+ and previous models / IP Camera / Tablets / Dropcam or other devices with 5V Micro USB input
- 2-Years warranty and unlimited technical support, Package content: 1x PoE gigabit splitter
Rank No. #7
Active 48V to 12V Waterproof PoE Splitter Adapter, IEEE 802.3af Compliant 10/100Mbps, Outdoor Power Over Ethernet Splitter, for Surveillance IP Camera, Wireless AP and VoIP Phone(White, 2-Pack)
- 【Non-PoE to PoE+】The Waterproof PoE splitter to split the PoE signal into 12V power supply and 10/100M Ethernet source in RJ45 so that non-PoE devices can be powered over Ethernet located up to 150-meter(492ft.) away. It’s a perfect solution for devices that don't support PoE in a PoE environment.
- 【12V/1-2A & 10/100Mbps】Output Power: 12V/1-2A, 15.4W(IEEE 802.3af), 25.5W(IEEE 802.3at). Plug Output: Data (1,2+/3,6-).
- 【Waterproof Protection】Support waterproof protection, adopts one-piece injector molding and injection holes, accessories tightly connected, has good waterproof performance; Support the isolation circuit protection, can effectively protect electrical equipment; Support the short circuit, overvoltage protection, 1500V high voltage isolation.
- 【Visualized LED Indicator】Equipped with LED indicator, indicator yellow LED light on indicates the voltage output is normal.
- 【Widely Application】Support international standard IEEE 802.3 I, IEEE 802.3 u, IEEE 802.3 x, IEEE 802.3 af, IEEE 802.3 at, compatible with DC voltage 48-55V standard POE switches. Plug and play, available with IP camera/phone, wireless AP and other 12V Non-POE devices for home, ffice, factory, mall, warehouse, etc.
Rank No. #8
DSLRKIT Gigabit USB Type C Active PoE Splitter 48V to 5V IEEE802.3af Power Over Ethernet for Raspberry Pi 4 4B
- The POE splitter must be connected to the POE switch, POE midspan or 48V~52V POE injector for proper operation
Rank No. #9
UCTRONICS PoE Splitter USB-C 5V - Active PoE to USB-C Adapter, IEEE 802.3af Compliant for Raspberry Pi 4, Google WiFi, Security Cameras, and More
- What is it - A UCTRONICS PoE splitter to split the PoE signal into 5V USB-C power supply and gigabit Ethernet in RJ45 so that non-PoE devices can be powered over Ethernet.
- What is PoE – Deliver power and data with a single Ethernet cable for fewer wall plugs and messed cables. Extend powerline to where no AC outlets are nearby, up to 300 feet away from the power source
- Why PoE to USB-C – A cost-effective way to add plug-and-play PoE support to 5V USB-C powered devices and make full use of PoE switches, or for a Raspberry Pi 4 setup where a PoE HAT is not applicable
- What else needed - You need an IEEE 802.3af compliant PoE switch or injector to serve as the PSE (Power Source Equipment) and an Ethernet cable with PoE signal to feed the splitter.
- Note – 1. This splitter does not support PD or QC fast charging protocols. 2. This splitter provides a maximum output of 2.4A with its 802.3af compliance. Check B07V35DH5F for power-hungry applications. 3. Just put the split Ethernet aside if you don’t need the data. 4. The Split Ethernet cable does not carry power anymore.
Rank No. #10
ANVISION Active Gigabit PoE Splitter Adapter with Multi-Size Tips, IEEE 802.3af Compliant, DC 5V 9V 12V Power Output, for IP Camera AP Voip Phone and More
- Output Voltage: 5V/9V/12V DC adjustable voltage, up to 18-24watts
- Data Rate: 100/100/1000Mbps, full IEEE 802.3af compliant
- Input Voltage: DC 36-48V, Gigabit (10/100/1000Mbps), Plug-and-Play
- Works with IP camera, IP phone, AP and other 5v/9v/12v Non-POE devices, Require no configuration
- Warranty: Two Years; Package content: 1x 5V/9V/12V PoE splitters
Last update on 2024-01-28 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best Active Poe Splitter?
Do you get stressed out thinking about shopping for a great Active Poe Splitter? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Active Poe Splitter, which is why we have assembled a comprehensive list of the greatest Active Poe Splitter available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Active Poe Splitter that you consider buying. Your questions might include the following:
- Is it worth buying an Active Poe Splitter?
- What benefits are there with buying an Active Poe Splitter?
- What factors deserve consideration when shopping for an effective Active Poe Splitter?
- Why is it crucial to invest in any Active Poe Splitter, much less the best one?
- Which Active Poe Splitter are good in the current market?
- Where can you find information like this about Active Poe Splitter?
We’re convinced that you likely have far more questions than just these regarding Active Poe Splitter, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Active Poe Splitter, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Active Poe Splitter. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Active Poe Splitter buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Active Poe Splitter currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Active Poe Splitter has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Active Poe Splitter?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Active Poe Splitter.
- Customer Ratings: Number ratings grade Active Poe Splitter objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Active Poe Splitter.
- Product Quality: You don’t always get what you pay for with an Active Poe Splitter, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Active Poe Splitter is should be an indication of how long it will work out for you.
We always remember that maintaining Active Poe Splitter information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Active Poe Splitter is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
