Skip to content

The Best Anet A8 Build Plate of 2022 – Reviews & Buying Guide

After hours researching and comparing all models on the market, we find out the Best Anet A8 Build Plate of 2022. Check our ranking below.

2,099 Reviews Scanned

Rank No. #1
220x220mm Ultrabase Platform Glass Plate Build Surface + Aluminum Heated Bed Hotbed 12V with Wire Cable for Anet A8 A6 for ANYCUBIC I3 Mega for Ender 3 /Ender 3 Pro 3D Printer
  • Excellent adhesion, ultrabase covered by microporous coating, shows strong adhesion in printing.
  • Easy to take off models by hand or with a little help from the scrapper for very large models.
  • Ultrabase integrated with heated bed: Super flatness, fast and uniform heating.
  • The special coating is inorganic, hardness of 8 Mohs, which makes it be able to work at 400ºC.
  • Durable to use, easy to clean by alcohol or water.
Rank No. #2
Pei Sheet Double Side Textured Build Plate Mat Spring Steel Magnetic Flexible Heated Bed 220x220mm Platform for The Anet A8, Maker Select Plus, Wanhao Tronxy xy-2, and P802M 3D Printers Printer
  • Double Sided Design - The Pei Foil consists of 2 parts, a flexible steel platform with double-textured Pei surface and a magnetic print bed with adhesive on the back. Simply stick the PEI magnetic sheet onto your heated bed, then place the steel platform with PEI coat on top.
  • Pei Build Plate - Our 3d printing plate can be placed on any existing magnetic base. It is resistant to 200℃ and the magnetic bottom sheet is not suitable for high temperature printing applications above 80℃. Compatible with PLA / PETG / PEEK / ABS and other filaments.
  • Easy To Remove Model - This surface with excellent adhesion, easy to paste and remove, no glue or shovel required. When the build surface cools down to room temperature, models can be removed by slightly bending the steel plate.
  • Wide Application - The size of pei sheet 220x 220 mm, not warped. It is applicable with 3D printers such as MK2/MK2A, Anet A8, Anet A6, Reprap, Mendel, Wanhao Duplicator i3, Monoprice Maker, not suitable for Ender 3, 5 etc. Please confirm your printer platform size before ordering. If your 3D printer with 220x220mm heat bed platform, then this PEI sheet is compatible with your 3D printer.
  • Satisfaction Guarantee - As a specialized pei printing plate manufacturer, we promise that we will only supply quality products to customer. If you encounter any problem when using this pei plate, please contact us directly. We will reply you within 24 hours. 30 days money back guarantee with 1 year additional replacement warranty.
Rank No. #3
CHPOWER Ender 3 s1 Magnetic 220x 220mm Print Bed(A+B), Magnetic Build Surface for Ender3 s1, Ender3 s1 pro, WanHao, Anet A8/ A6, Reprap, Mendel, MK2/ MK2A and MK3, Black
  • UNIVERSAL: Widely used in all FDM printer models, and all heated and non-heated 3D printer beds.
  • ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design.
  • CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
  • EASY MODEL REMOVAL: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.
  • DURABILITY & EASY CLEAN: It is capable to work at 70ºC.Can be used repeatedly,resistance, Durable, Strong magnetic,Easy clean with alcohol.
Rank No. #4
IdeaFormer-3D Printer Bed Textured PEI+ Smooth PEO 220x220mm Spring Steel Build Plate with Magnetic Sticker Base for Artillery Genius/Pro/MK2/MK2A/Anet A8/Anet A6
  • 【PEO+PEI Printing Bed Design】PEO+PEI print bed double-sided, one side is smooth PEO plate, the bottom of the printed model is smooth, and the model is easy to remove and clean. The other side is PEI frosted plate surface, presenting the frosted sticker surface a distinctive frosted touch, provides greater adherence to the model and prints without warping.
  • 【Compatible Filaments】PEO build plate surface only prints PLA filaments; PEI surface bed print most filaments like PLA/ABS/PETG/TPU/Nylon.
  • 【High Resistance】The PEO printing plate surface is resistant to high temperature 120℃ and the PEI sheet coating is 260℃.
  • 【Easy to Use and Remove】No more tape, glue, shovel and release your pressure anxiety. Prints can be easily removed by hand once the build plate surface has cooled.
  • 【Compatible 3D Printer】Our double-sided textured PEO+PEI spring steel plate fit 3D printers with a platform size of 220x220, such as MK2/MK2A, Anet A8, Anet A6, Reprap, Mendel, Wanhao Duplicator i3, Monoprice Maker. Not Suitable For Ender 3, 5 series. Please confirm your 3D printer bed size before ordering.
Rank No. #5
Twotrees Double PEI Sheet 220x220mm/8.67x 8.67 inch Flexible Spring Steel Magnetic Build Plate【Textured/Smooth Double Sided】 for Anet A8 Wanhao Duplicator i3 Monoprice Maker 3D Printers.
  • 【Special Design】: Excellent double-sided PEI magnetic build plate design. The smooth surface and matte texture can meet your needs at the same time. Genuine PEI powder coating is heat resistant which temperature resistance can be up to 200℃ with no deformation.Higher cost performance and One multi-purpose.
  • 【Easy to Use and Long life】:No glue, No tape, PEI printed bed with authentic 3M has strong adhesion; No scraping, easy to remove the printed matter from the bed by bending. Through hundreds of experimental tests, repeated use is still as new. After many times printings, lightly scour the surface of the PEI with some mild steel wool with 400 grit will have great adhesion or use alcohol to clear it and let it dry.
  • 【High Quality】: Made of high quality stainless steel and strong magnetic base, tear off the backing paper and stick it to the bed, stick the magnetic base to your build plate, then put the steel plate on the magnetic plate. Please remove the protective film on the surface before printing. Flexible, detachable, high strength, heat-resistant, four-layer design, thicker and more durable. Easily handles temperatures up to 130°C. Great for PLA/PETG/PEEK/ABS and other filaments.
  • 【Wide application】: Three sizes are available: 220mm, 235mm, 310mm. Magnetic PEI sheets are compatible with Ender 3 / Ender 3X / Ender 3 Pro / V2 / 3 Ender 3 Prox / Ender 5 / Ender 5 Pro, CR-20, CR-20 Pro, etc.
  • 【 Notice】: There is a transparent protective film on the surface of the smooth PEI sheet spring steel build plate, which needs to be torn off before use. If there are bubbles on the film, it is not a quality problem, just tear it off, it will not affect the use.If you have any questions about product quality and suggestions, please feel free to contact us and we will reply within 24 hours.
Rank No. #6
Twotrees Double Side Smooth Textured PEI Sheet 220x220mm Magnetic PEI Bed for I3 Mega S Anets A8 A6 Voron 2.4 Magnetic Spring Steel Build Plate
  • 【Kit Includes】1 pcs Double-sided PEI sheet (One side smooth PEI, one side textured PEI). 1 pcs Flexible adhesive backed magnetic base. Double-sided PEI sheets produced using advanced technology.
  • 【Easy to install】Stick the soft magnetic base to the heating bed of your 3D printer, then put the stacked PEI steel foil platform on top and you are ready to use. the PEI surface sticks to the magnet almost too well, it makes it so easy to switch between smooth bottom surfaces and textured bottom surfaces.
  • 【Easy to use】For most filaments, no need for stick glue, tape or other adhesive. Good adhesion can be achieved when the temperature of the heated bed is around 60°C. When the PEI building surface has cooled, the print can be easily removed by hand by simply bending the spring steel PEI slightly. The maximum printing temperature of PEI is 120°C, it is compatible with most of filament, such as: PLA/ ASA/ PLA+/ ABS etc.
  • 【Compatibility】The size of PEI sheet is 220*220mm, not warped. It is suitable for I3 mega S, Anets A8/A6 and other 3D printers. If your 3D printer has a 220x220mm heat bed platform, This PEI sheet is compatible with your 3D printer.
  • 【Outstanding service】If there is a issues with the product you received, send us a message and we will help you out. If the product is damaged during use, we will replace it with a new one for you. Thanks.
Rank No. #7
Double Sided Textured PEI Sheet, 3D Printer Parts Printing Plate Frosted PEI Surface 310 x 310 mm for CR-10 CR-10S Anet A8+, E12,3D Printers(Without Magnetic Bottom Sheet)
  • 【Upgrade PEI Sheet 】:310mm x 310mm/12.2x12.2 inch, compatible with CR-10 10S Pro CR-X MP Maker Pro, Long LK1/ PRO LK5 PRO/Artilery X1ease measure your bed, not rely on build volume/printing size.
  • 【Double-sided】】:PEI magnetic Flexible bed has double-sided PEI coating, both sides can be used.
  • 【High Temperature Resistance】:Genuine PEI powder coating is heat resistant which temperature resistance can be up to 200℃ with no deformation
  • 【Textured Surface】:The textured side makes the bottom of the prints show a matte texture and retain the frosted feeling.And perfect for PLA/ABS/TPU/PEFG/Nylon.
  • 【Easy to use】PEI Spring steel Easy to remove the plastic parts by bending and popping it off when cooling, easy to print, easy to maintain
Rank No. #8
Fulament PEI Sheet Plate for Anet A8, Cocoon 3D Printer Touch, TronXY X2, P802M, Ultimaker 1, MonoPrice Maker, Ultimate and V2, Robo R2 | Smooth & Textured Magnetic Bed | Fula-Flex 2.0 | 220 x 220
  • [ TWO SIDES. TWO FINISHES ] - Fulament flex bed is made with high-quality spring steel that makes it a highly durable PEI sheet for 3D printing. We use 75% thicker PEI and 25% thicker spring steel, significantly increasing Fula-Flex longevity. Our PEI build plate is double-sided, with one textured and one smooth side. The textured powder-coated side of the PEI bed leaves a textured matte finish. The Smooth side of the PEI bed finish leaves a glossy, reflective finish on the bottom of your print
  • [ EASY TO INSTALL ] - Fulament PEI build plate is very easy to use. Simply stick the magnetic sheet onto your heated bed and place the flexible PEI build plate platform with a PEI surface on top. The magnetic sheet surface holds the flexible build plate very tightly. Once you have finished printing, remove the spring steel plate, flex the print off, and snap the Fula-Flex back onto the magnetic sheet. Prints are removed easily without any scratches or damage
  • [ STRONG GRIP WHEN HEATED. EASY RELEASE WHEN COOLED ] - Keeping our customers' needs in mind, we build a 3D print mat that increases printing success. Our 3D printing mat grips the parts with strength when heated and releases them effortlessly when cooled. Print across the entire build plate with confidence. The magnetic sheet can sustain higher temperatures of 130°C, making it perfect for materials like PLA, PETG, ABS, TPU, ASA, Nylon, and Polycarbonate!
  • [ COMPATIBILITY ] - Fulament 3d printer magnetic build plate 220mm x 220mm fits Anet A8,Cocoon 3D Printer, Wanhao Duplicator i3 V1 / Plus, Wanhao Duplicator 6, Ultimaker 1, Monoprice Maker Select Plus / Ultimate / V2, Tronxy X2, P802M, Robo R2, Mega Pro, Mega S
  • [ FULAMENT'S PROMISE ] - Fulament is a USA-based company, and our products are made by enthusiasts for enthusiasts. We know you'll love our 3D printer bed mat as much as we do. All of our products feature a 12-month warranty PLUS knowledgeable tech support. If you have any kind of question or problem regarding our product, feel free to contact us, and we will be happy to assist you shortly. “FULAMENT” is a Trademark Registered Brand
Rank No. #9
Textured PEI & Carbon Fiber with Magnetic Pad Build Plate Double Side Spring Steel Sheet 220x220MM Hotbed Plate for Anet A8 A6 ET4 ET4X ET4Pro 3D Printer Parts (220x220mm)
  • Name: 3D Printer Hot bed PEI Spring Steel Sheet
  • Style: PEI-Carbon Fiber
  • Size: 220x220mm
  • Material: Steel with PEI coated and Carbon Fiber coated
  • 【Compatible 3D Printers】220x220mm Compatible for Anet A8 A6 ET4 ET4X ET4P
SaleRank No. #10
Upgraded PEI Sheet 310x310mm Specular Effect Pea Smooth Spring Steel Build Plate Magnetic Flexible Print Bed with Base for Cr-10s Cr-10 Anet A8+ Artillery SW-X1 X2 3D Printer.
  • 1.【Innovative Material 】:The innovative PEA material makes the bottom of printed parts flatter and smoother, while retaining a glass-like reflectivity, maintains stronger adhesion and durability than PEO/PET, and performs better in low-temperature printing, completely eliminates the problem of bubbles.
  • 2.【Proven Solution】: Flexible, removable, high strength and heat resistance, thicker and more durable. Easily handle temperatures up to 130°C. And perfect for PLA, PEEK, ABS. No scraping, easy to remove the printed matter from the platform by slightly bending. The solution has been successfully applied to various sizes and models of 3D printers, and the experimental results show that the product can be repeated use is still as new Through hundreds of tests.
  • 3.【Easy to Use】:Do not need glue, beauty pattern paper and other fixed ways, just use isopropyl alcohol to clean the flexible build plate surface, heat the hotbed to the right temperature according to the kind of filament (generally PLA materials need a hot bed to about 60 °), and then start printing.After printing, just slightly bend the PEI sheet platform, you can remove the print easily.(Note:The smooth surface has a factory protective film that needs to be removed.)
  • 4.【Good Quality】: Size 310x310mm/12.2x12.2inch Upgraded PEA sheet is suitable for Creality Cr-10s/ Cr-10/ Anet A8+ /Tevo Tornado/ Nereus /Artillery /SW-X1/ X2/ Tenlog D3 Pro/ Longer LK1 3D Printer. While PEA may be more expensive than other materials, we believe in providing the best quality products to our customers
  • 5.【Commitment】:All products are inspected before shipment.Considering that the transportation time is long,if you have any questions about product quality and suggestions, please feel free to contact us and we will reply within 24 hours.Please measure the size of your printing platform before purchasing. We are very grateful for your love and care for the product.

Last update on 2023-12-01 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best Anet A8 Build Plate?

Do you get stressed out thinking about shopping for a great Anet A8 Build Plate? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Anet A8 Build Plate, which is why we have assembled a comprehensive list of the greatest Anet A8 Build Plate available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Anet A8 Build Plate that you consider buying. Your questions might include the following:

  • Is it worth buying an Anet A8 Build Plate?
  • What benefits are there with buying an Anet A8 Build Plate?
  • What factors deserve consideration when shopping for an effective Anet A8 Build Plate?
  • Why is it crucial to invest in any Anet A8 Build Plate, much less the best one?
  • Which Anet A8 Build Plate are good in the current market?
  • Where can you find information like this about Anet A8 Build Plate?

We’re convinced that you likely have far more questions than just these regarding Anet A8 Build Plate, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Anet A8 Build Plate, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Anet A8 Build Plate. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Anet A8 Build Plate buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Anet A8 Build Plate currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Anet A8 Build Plate has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Anet A8 Build Plate?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Anet A8 Build Plate.
  5. Customer Ratings: Number ratings grade Anet A8 Build Plate objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Anet A8 Build Plate.
  7. Product Quality: You don’t always get what you pay for with an Anet A8 Build Plate, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Anet A8 Build Plate is should be an indication of how long it will work out for you.

We always remember that maintaining Anet A8 Build Plate information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Anet A8 Build Plate is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: