The Best Digiyes of 2022 – Reviews & Buying Guide
After hours researching and comparing all models on the market, we find out the Best Digiyes of 2022. Check our ranking below.
2,497 Reviews Scanned
SaleRank No. #1
DiGiYes Bluetooth Power Amplifier Board with Subwoofer 2.1 Channel 50W x 2+100W DC 12V-24V Audio Power Amplifier Module for DIY Bluetooth Audio and Store Home Theater with Treble and Bass Control
- The ZK-MT21 power amplifier board uses Bluetooth 5.0, and its transmission distance can reach 49 feet (without obstruction). At the same time, this power amplifier board has a 3.5mm AUX audio input interface. No matter what kind of input method, you can always find a method that suits you.
- With bass, treble, subwoofer frequency and volume control, easy to adjust volume, enjoy the music tone what you want. If you are tired of the inherent high & low bass, why not try the high & low control knob. This will make you feel like being in a movie theater.
- Bluetooth audio amplifier module 2.1 channel, Max output power 2X50W+100W. The signal is better, the efficiency is high, and the anti-interference ability is strong.
- ZK-MT21 Bluetooth power amplifier board has multiple protection mechanisms to ensure its safe operation. It has short circuit protection, over-current, over-heat, and anti-reverse protection. When an overload occurs, the device reports the fault condition to the processor to protect itself from damage.
- It adopts copper DC connector and fence type terminal. It can withstand large current, no heat, no damage to the wire. Using a universal 5.5mm * 2.1mm plug interface for power supply.
SaleRank No. #2
DiGiYes AC Motor Speed Controller Fit for Fan Electric Motor Router Rheostat, SCR Voltage Controller 110V 220V 18A 4000W Max
- This is a stepless adjustable voltage speed controller, the input voltage is AC 110V / 220V, the output voltage is 10-110V / 10-220V (stepless adjustable), the maximum power is 4000W, the rated current is 9A, can withstand a maximum current of 18A.
- The voltage controller has variable thyristor and electronic voltage regulator. The maximum power of connecting inductive loads (such as fans, routers) is about 2000W, and the limit power of connecting resistive loads (such as electric furnaces, heating wires) is 4000W.
- The output voltage of the product is a virtual voltage when there is no load. When a load (20W or more) is connected, the actual output voltage value is shown on the display. This motor speed controller is equipped with a new bi-directional high power SCR inside. You can easily control the speed of your motor to your desired level using the rheostat.
- Our voltage stabilizer adopts high premium chip thyristor, all aluminum heat sink is suitable for high temperature circuits, and adopts multi-functional industrial sockets. The copper parts are thicker inside, with high current, good contact and high safety. The fan speed control switch has a power light, and the heat dissipation connector can help quickly dissipate heat and prevent burnout.
- Zero lag, zero delay, with peak-voltage absorption circuit to effectively protect high power Thyristor anti surge, anti peak-voltage, RC absorption multiple protection.
Rank No. #3
DiGiYes GT2 Timing Belt Idler Pulley 20 Toothless 5mm Bore 10mm Width Timing Belt Idler Pulley Wheel for 3D Printer
- Product Contain: 5 x Timing belt pulleys, suitable for 10mm wide timing belt
- Size: Teeth Type 20 Toothless, Bore 5mm.
- Material: High quality Aluminum, Adopt surface oxidation treatment, anti-Rust and Anti-corrosion effectively.
- Double bearings: Use High-quality Motor-grade bearings to ensure that the machine is works good.
- Application: Widely used in milling machines, gear forming machines, drilling machines, CNC machine tools, hobbing machines or other mechanical transmission applications.
SaleRank No. #4
DiGiYes PWM DC Motor Speed Controller, DC 10-55V 60A LED Display Stepless 12V 24V 36V 48V DC Brushed Motor Speed Controller with Adjustable Potentiometer and Forward-Brake-Reverse Switch
- Note: Please follow our Figure 2, otherwise the module would be smoking when plugged in.
- Input supply voltage is DC 10V - 55V, maximum current is 60A, continuous current is 40A, speed range is 0 -100 percent, control frequency is 15KHz, apply to DC brush motor.
- PWM DC motor speed controller is specially developed for motor DIY enthusiasts. Perforated aluminum alloy casing can protect users from electricity and help dissipate heat. The display screen allows you to easily understand the percentage of actual motor speed to rated speed. The potentiometer knob can help you easily control the motor speed. The switch provides CW and CCW rotation direction selection for the motor.
- The stepless motor controller has a simple potentiometer knob adjusts the motor speed from 0 - 100 percent smoothly. With 100K ohm potentiometer, it adjusts the output voltage accurately to control motor speed. The plastic knob can be separated from the potentiometer. Then you can fix the knob to your control panel.
- The PWM DC motor speed controller come with switch function, provide forward and reverse rotation choice for you. High power speed controller switch which is much more adaptable and convenient to change the motor direction.
Rank No. #5
DiGiYes 120pcs Breadboard Jumper Wires 10cm 40pin Male to Female Multicolored Connection Wire for Arduino
- Connector Type: Standard 2.54mm Pitch 1Pin-1Pin Dupont Housing Connector, with brass nickel plated terminals, provides excellent electrical conductivity and oxidation resistance.
- Package include: 3 x 40pin Male to Female jumper wires (Total 120pcs).
- Cable length: 10cm (3.9 inch) / Cable material: 12-core pure copper wire.
- Cable Feature: The dupont wires can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers.
- Application: For Raspberry pi / Parallax / DIY experiment / Electronic projects / Arduino breadboard / PC motherboard / PCB project.
Rank No. #6
DiGiYes 4Pcs VL53L0X Time-of-Flight (ToF) 940nm Laser Ranging Sensor Breakout GY-VL53L0XV2 Distance Measurement Module Fit for Arduino
- The VL53L0X time-of-flight range sensor is a next generation laser range module. The VL53LOX is a fully integrated sensor with embedded infrared, human eye safe laser, advanced filters and ultra high speed photon detection arrays for longer range, speed and accuracy.
- The VL53LOX ToF laser ranging module housed in the smallest package on the market today, providing accurate distance measurement whatever the target reflectance unlike conventional technologies. It can measure absolute distances up to 2m, setting a new benchmark in ranging performance levels, opening the door to various new applications.
- The VL53LOX integrates a leading-edge SPAD array (Single Photon Avalanche Diodes) and embeds second generation flight sense patented technology.
- The VL53LOX's 940nm VCSEL emitter (Vertical Cavity Surface Emitting Laser), is totally invisible to the human eye, coupled with internal physical infrared filters, it enables longer ranging distance, higher immunity to ambient light and better robustness to cover glass optical cross-talk.
- The sensing capability of the VL53LOX can support a wide range of functions including gesture or proximity detection for a variety of innovative user interfaces, obstacle detection and collision avoidance systems for floor sweepers and service robots, user presence detection or power on/off monitors for home appliances and laptops, as well as drones and Internet of Things (IoT) products.
Rank No. #7
DiGiYes 20Pcs WH148 Single-Joint Potentiometer B10K Variable Resistors 15mm Shaft 3Pins 10K Ohm Potentiometer (10K-20pcs)
- WH148 B10K / B50K / B100K single potentiometer, short handle 3 output pins, shaft length 15mm, 10K / 50K / 100K adjustable resistance, linear diversify of resistance.
- A potentiometer is an adjustable electronic component whose function in a circuit is to obtain an output voltage that is proportional to the input voltage (applied voltage).
- Potentiometer is composed of a resistor and a rotating system. By manually adjusting the rotating shaft, the position of the moving contact on the resistor body can be changed to achieve changes in voltage and current.
- The function of a potentiometer is to divide and divide voltage, and to serve as a rheostat. It is commonly used in situations where the resistance value is frequently adjusted and requires stable and reliable resistance. In circuits, the voltage and current are mainly adjusted by changing the resistance value. It is commonly used in various electronic products that need to adjust the working point and frequency point, such as multimedia, power amplifiers, audio systems, electronic devices, etc.
- The potentiometer has 3 outgoing terminals, of which 2 are fixed terminals, with the highest resistance between them, which is the standard value of the potentiometer. Another is the movable terminal, which changes the resistance size by changing the position between the movable terminal and the fixed terminal.
Rank No. #8
DiGiYes ESP32 S2 Mini V1.0.0 WiFi Board Based ESP32-S2FN4R2 ESP32-S2 4MB Flash Type-C Connect Fit for MicroPython
- Based on ESP32-S2FN4R2 WIFI IC TYPE-C USB development board.
- Supports ADC, DAC, I2C, SPI, USRT, and USB OTG.
- 27 digital input / output pins, all of which support interrupt / PWM / single wire.
- Type-C USB
- 4MB Flash;2MB PSRAM
Rank No. #9
DiGiYes 3D Printer Filament Rack Spool Bracket Holder with Bearing Rotatable Fit for Sidewinder X1 / Ender 3 / CR10 Series
- The 3D printer filament holder is rotatable and will not entangle the filament, making it very convenient to use.
- Our printer filament material mount rack bracket kit is made of stainless steel, aluminum alloy, and ABS plastic, which is securely installed and provides smooth wire feeding.
- ABS has light weight, strong durability, and strong corrosion resistance. Equipped with 608ZZ rotatable bearings to reduce the pulling force of the extruder when pulling the filament.
- Stainless steel sheet metal bracket and barrel shaft, with strong load-bearing capacity. Our filament spool holder bracket can support a maximum weight of 2.5KG.
- The installation is simple and fast, and the rotating barrel holder adopts a snap design, suitable for 0.5-2mm thick brackets. The sheet metal bracket is fixed with 2pcs M5 screws, which are stable and not loose.
Rank No. #10
DiGiYes 120pcs Breadboard Jumper Wires 10cm 40pin Female to Female Multicolored Connection Wire for Arduino
- Connector Type: Standard 2.54mm Pitch 1Pin-1Pin Dupont Housing Connector, with brass nickel plated terminals, provides excellent electrical conductivity and oxidation resistance.
- Package include: 3 x 40pin Female to Female jumper wires (Total 120pcs).
- Cable length: 10cm (3.9 inch) / Cable material: 12-core pure copper wire.
- Cable Feature: The dupont wires can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers.
- Application: For Raspberry pi / Parallax / DIY experiment / Electronic projects / Arduino breadboard / PC motherboard / PCB project.
Last update on 2025-04-10 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best Digiyes?
Do you get stressed out thinking about shopping for a great Digiyes? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Digiyes, which is why we have assembled a comprehensive list of the greatest Digiyes available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Digiyes that you consider buying. Your questions might include the following:
- Is it worth buying an Digiyes?
- What benefits are there with buying an Digiyes?
- What factors deserve consideration when shopping for an effective Digiyes?
- Why is it crucial to invest in any Digiyes, much less the best one?
- Which Digiyes are good in the current market?
- Where can you find information like this about Digiyes?
We’re convinced that you likely have far more questions than just these regarding Digiyes, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Digiyes, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Digiyes. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Digiyes buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Digiyes currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Digiyes has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Digiyes?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Digiyes.
- Customer Ratings: Number ratings grade Digiyes objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Digiyes.
- Product Quality: You don’t always get what you pay for with an Digiyes, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Digiyes is should be an indication of how long it will work out for you.
We always remember that maintaining Digiyes information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Digiyes is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
