Skip to content

The Best Dissolvable Filament of 2022 – Reviews & Buying Guide

After hours researching and comparing all models on the market, we find out the Best Dissolvable Filament of 2022. Check our ranking below.

2,906 Reviews Scanned

Rank No. #1
Polymaker PVA Filament 1.75mm Water Soluble Filament 750g Cardboard Spool - PolyDissolve S1 Support Material for PLA 3D Printer Filament, Soluble PVA Filament 1.75 3D Printing PVA Dissolvable Filament
  • 💧 【PVA Water Soluble Filament Support Material for PLA / TPU / PVB / Nylon】 - PolyDissolve S1 PVA filament 1.75mm is a 3D printer filament soluble developed for normal printing temperature 3D filament such as PLA filament, TPU filament, PVB filament and Nylon filament 1.75mm, ideal for printing complex geometry model such as art sculptures, figurines, models with internal cavities, all-in-one mechanisms or architectural models
  • 🧵 【Tangle Free & Moisture Free】 - Polymaker PolyDissolve filament water soluble support material filament is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please make sure to NEVER let go the tip of the filament as it may create nodes. Holes on the side of the spool can be used to prevent this issue
  • ♻️ 【Cardboard Spool】 - Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box
  • ⚙️ 【PolyDissolve S1 Printing Settings】 - Nozzle: 215˚C - 225˚C; Bed: 25˚C - 60˚C; Speed: 30mm/s - 40mm/s( 3D printing PVA Filament 1.75 )
  • 🛡️ 【Risk Free & Lifetime Technical Support】 - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need
Rank No. #2
Fused Materials PVA 3D Printer Filament, 1.75mm, 0.5kg roll - Dissolvable Filament - Water Soluble Filament for 3D Printers and 3D Pens
  • An Innovative Material - Fused Materials Polyvinyl Alcohol (PVA) is a water-soluble filament that offers many unique uses, such as printing dissolvable support structures that would otherwise be difficult to remove by hand, creating casts, complex geometries, and more. PVA is primarily used with dual-extruder 3D printers.
  • Easily Remove Support Structures - Once your print is complete, simply place it in water at room temperature, and the PVA support structures will begin to dissolve. Soon after, you'll be ready to effortlessly peel off the supports from your print, thus avoiding the traditional risk of imperfections caused by chipping-off support structures.
  • Create Complex Prints - When using a 3D printer, support material like PVA enables you to print models that would otherwise be impossible. A filament like PVA supports the material above it, allowing you to print objects that contain cavities or overhangs/bridges. This immensely expands your design freedom.
  • High Performance and Versatility - Fused Materials PVA works on all dual extruder 3D printer brands. PVA works with various materials, but it works best with PLA. After using PVA, we recommended using Fused Materials Cleaning Filament to prevent PVA from sitting in your extruder (available on Amazon).
  • Dimensional Accuracy and Consistency - We use CCD diameter measuring and a self-adaptive control system to ensure our PVA filament is consistently 1.75mm in diameter. Dimensional accuracy +/- 0.03 mm; 0.5 kg spool (1.1lbs).
SaleRank No. #3
SainSmart 1.75mm PVA Dissolvable 3D Printers Filament -0.5kg/1.1lbs (Natural)
  • 0.5 KG (approximately 1.10 lbs) Spool
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
  • PVA 3D Printer Filament Vacuumed Sealed With Desiccant
  • Recommended Extrusion/Nozzle Temperature 160°C - 180°C (320°F - 356°F)
  • Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 1.50"
Rank No. #4
Fused Materials PVA 3D Printer Filament, 1.75mm, 1kg roll - Dissolvable Filament - Water Soluble Filament for 3D Printers and 3D Pens
  • PREMIUM PVA: Our professional grade filament ensures better dissolvability, stronger toughness, smoother printing, no bubbles, no warping, and a pleasant tangle-free experience. ROHS and CE certified.
  • DISSOLVABLE FILAMENT - Fused Materials PVA is a water-soluble filament used with dual extruder 3D printers to print support structures, molds, complex shapes and more!
  • OPTIMIZED FOR PLA – Fused Materials PVA was designed to be a user-friendly dissolvable material and works best with many common materials such as PLA.
  • VACUUM SEALED: Fused Materials PVA is comes packaged in a vacuumed resealable mylar pouch with an added desiccant to preserve the filament quality. When the filament is not in use, easily reseal the bag to prevent dust build up and moisture buildup.
  • TECHNICAL SPECIFICATIONS: Consistent Diameter - +/- .03mm dimensional accuracy. Spool Diameter: 8" - Spool Width: 2.5" - Spool Hub Hole Diameter: 1.50; 1 kg spool (2.2lbs). Recommended extrusion/nozzle temperature 190°C - 220°C, bed 50-80℃. Works perfectly with all common 1.75mm FDM 3D printers.
Rank No. #5
eSUN Water Soluble PVA Filament 1.75mm, 3D Printer Filament PVA, 0.5KG Spool 3D Printing Filament for 3D Printers, Natural
  • 【Water Soluble PVA】Water-soluble Polymer. Excellent Water Solubility. Easy to Peel off, Will not Damage Printed Surface. Good Bonding to Various Material Such as PLA. Environmental-friendly and Non-toxic. Ideal for Complex Prints!
  • 【Stable Dimensional Tolerance】Minimum tolerance and low warping to ensure consistent feeding and stable prints, no clogging, no bubbles, extremely high successful rate, resulting in an outstanding surface finish and are highly precise.
  • 【Tangle Free & No Plugging】Full 0.5KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, does not overlap or tangle, less stringing, strong layer adhesion. Melt well, feed smoothly and constantly without clogging the nozzle or extruder.
  • 【Support Material】Thanks to its solubility in water, makes it possible to print complex models and mobile constructions that no longer need to be assembled from individual parts. Simply wash away the support structure by immersing the model in water.
  • 【Vacuumed Sealed Packaging】0.5KG Spool Water Soluble PVA Filament comes in a sealed vacuum bag with a desiccant bag, easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.
Rank No. #6
PVA Filament, Water Soluble Support 3D Printer Filament,1.75mm 0.5KG Spool for 3D Printers, Natural…
  • 【TECHNICAL SPECIFICATIONS】 Spool Diameter: Diameter 1.75mm, dimensional accuracy + / - 0.02 mm; 0.5 kg spool (1.1lbs). Recommended extrusion/nozzle temperature 230°C - 240°C, bed 50-80℃. Works perfectly with all common 1.75mm FDM 3D printers.
  • 【Water Soluble PVA】Water-soluble Polymer. Excellent Water Solubility. Easy to Peel off, Will not Damage Printed Surface. Good Bonding to Various Material Such as PLA. Environmental-friendly and Non-toxic. Ideal for Complex Prints!
  • 【HIGH PERFORMANCE】 With even tight winding, clog-free and bubble-free, always maintain a smooth feeding during printing, effectively reduce unexpected printing interruptions. Enjoy design and bring to life your inventions.
  • 【VACUUM SEALED】Our printer filament came in a sealed vacuum bag and a desiccant to remove any moisture inside the bag so it stayed dry (wet filament don't print well). And please keep it dry and dust-free after after opening the sealed package to prevent it becomes brittle or jams the nozzle.
  • 【Support Material】Thanks to its solubility in water, makes it possible to print complex models and mobile constructions that no longer need to be assembled from individual parts. Simply wash away the support structure by immersing the model in water.
Rank No. #7
YXPOLYER New Alkali Soluble Support Filament,1.75mm Dissolvable Filament,Support Material for pc/abs/Nylon etc filaments,Temperature Resistance 120℃ Instead of PVA,1kg Spool,Natural White
  • ★【YXPOLYER high performance support filament】YXPOLYER AquaSol-120 is a new type of soluble support material, which dissolves quickly and is easy to operate. It meets the needs of engineering materials for soluble printing supports, and can realize the freedom of complex geometric design. It can be used with Sol-120 fast catalytic dissolver.
  • ★【Features & applications 】High temperature resistance: up to 120 degrees, supporting materials that need to be heated by the cavity;Good solubility: the material has excellent alkali solubility and will not leave any residue on the printed model;Strong adhesion: tightly adhere to the supported body, highly restored prototype design of the model;High compatibility: suitable for printing support of general engineering plastics such as ABS, PA, PC, PETG and composite materials;
  • ★【High compatibility】Dimensional Accuracy +/- 0.04mm. Its compatibility with other industrial grade printing materials is higher than other support materials, especially with YXPOLYER products!YXPOLYER filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers.
  • ★【1.75mm engineering Filament Diameter】Dimensional Accuracy +/- 0.04mm. YXPOLYER filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers.
  • ★【Triple waterproof protective packaging】Our packaging is vacuum sealed with semi-aluminum foil bags with desiccant,which can better isolate air and water molecules.Vacuum bag with sealing mouth, can be reused.We use a transparent plastic film to adhere to the surface of the box by hot pressing, so that the periphery of our box has a waterproof function!Unique packaging gives our material a Triple Waterproof protection!
Rank No. #8
SainSmart 1.75mm PVA Dissolvable 3D Printers Filament, Water Soluble Support Filament for 3D Printers -0.5kg/1.1lbs (Natural), Dimensional Accuracy +/- 0.05mm
  • Faster Dissolution Rate: PVA filament begins to dissolve after 1-2 minutes in water at 50°C.
  • Creative Freedom: Sainsmart PVA filament provides stable support to complex designs, even those with features like cavities, and intricate internal details.
  • Compatible with PLA: PVA is used in conjunction with PLA not ABS because it adheres well to PLA. The extrusion temperature difference can also be problematic with ABS.
  • Printing Setting: Recommended Extrusion/Nozzle Temperature 190ºC- 210ºC (212ºF - 410ºF); Recommended bed Temperature 60ºC- 80ºC (140ºF - 176ºF).
  • Package: PVA 3D Printer Filament Vacuumed Sealed With Desiccant.
Rank No. #9
Fused Materials PVA 3D Printer Filament, 2.85mm, 0.5kg roll - Dissolvable Filament - Water Soluble Filament for 3D Printers and 3D Pens
  • An Innovative Material - Fused Materials PVA is a water soluble filament used with dual extruder 3D printers to print support structures
  • Consistent Diameter - +/- .03mm dimensional accuracy
  • Optimized for PLA - PVA works with a variety of materials but it works best with PLA
  • Low-print temperature - PVA work best at low-temperatures. Refer to the instructions on the box!
  • Works on all major dual extruder 3D printer brands
Rank No. #10
Fused Materials PVA Filament with Cleaning Filament Bundle, 1.75mm - Dissolvable Filament for 3D Printers – Bundle Includes .5Kg Roll of PVA and 0.1Kg Roll of Cleaning Filament
  • Dissolvable PVA Filament: The bundle includes a 0.5kg roll of PVA (Polyvinyl Alcohol) filament, renowned for its water-soluble properties. PVA serves as an excellent support material for intricate 3D prints, dissolving easily in water, leaving behind clean and detailed final prints.
  • Cleaning Filament for Maintenance: This bundle goes beyond just support material. It includes a 0.1kg roll of cleaning filament designed to assist in maintaining the health of your 3D printer. Cleaning filament helps purge residues from the nozzle, ensuring optimal performance and print quality.
  • 1.75mm Diameter for Compatibility: With a universal 1.75mm diameter, both the PVA and cleaning filaments are compatible with a wide range of 3D printers. This ensures ease of use and versatility, allowing users with different printer models to benefit from the bundle.
  • Varied Roll Sizes for Different Needs: The bundle includes different roll sizes, with 0.5kg for PVA and 0.1kg for cleaning filament. This variation accommodates different project sizes and maintenance needs, reducing waste and providing flexibility for users with varying requirements.
  • Complete Solution for 3D Printing: This bundle offers a comprehensive solution for 3D printing needs, combining dissolvable support material with a specialized cleaning filament. The combination enhances the overall printing experience by simplifying support removal and ensuring consistent printer maintenance.

Last update on 2022-10-28 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best Dissolvable Filament?

Do you get stressed out thinking about shopping for a great Dissolvable Filament? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Dissolvable Filament, which is why we have assembled a comprehensive list of the greatest Dissolvable Filament available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Dissolvable Filament that you consider buying. Your questions might include the following:

  • Is it worth buying an Dissolvable Filament?
  • What benefits are there with buying an Dissolvable Filament?
  • What factors deserve consideration when shopping for an effective Dissolvable Filament?
  • Why is it crucial to invest in any Dissolvable Filament, much less the best one?
  • Which Dissolvable Filament are good in the current market?
  • Where can you find information like this about Dissolvable Filament?

We’re convinced that you likely have far more questions than just these regarding Dissolvable Filament, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Dissolvable Filament, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Dissolvable Filament. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Dissolvable Filament buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Dissolvable Filament currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Dissolvable Filament has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Dissolvable Filament?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Dissolvable Filament.
  5. Customer Ratings: Number ratings grade Dissolvable Filament objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Dissolvable Filament.
  7. Product Quality: You don’t always get what you pay for with an Dissolvable Filament, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Dissolvable Filament is should be an indication of how long it will work out for you.

We always remember that maintaining Dissolvable Filament information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Dissolvable Filament is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: