The Best Jumbospot of 2022 – Reviews & Buying Guide

After hours researching and comparing all models on the market, we find out the Best Jumbospot of 2022. Check our ranking below.

2,894 (random num) Reviews Scanned

Rank No. #1

AURSINC MMDVM Hotspot Spot Radio Station WiFi Digital Voice Modem Work Contained with Raspberry Pi Zero W with Firmware V1.5.2 UHF Supports C4FM YSF POCSAG NXDN DSTAR P25 DMR

[EASY SET UP] Preload sofeware Pi-Star on TF card, no need to download again. Radio Frequency: (UHF:430-440) This is upgraded version, do not need to set RXOFFSET and TXOFFSET, they're default 0. Note: when you flash the TF card with new version software, please DO NOT copy on the TF card directly, use a write in tool to write the software on TF card
[EASY CHARGING] Free micro USB charging cable included, charged with power bank or connect to laptop or computer. The Hotspot will also work mobile in your vehicle if you tether it to your mobile phone network
Firmware V1.5.2, the MMDVM hotspot board supports updating to V1.6.1 (How to Update MMDVM_HS for WPSD 1.6.1: jumbo5566 .github.io). To speed up the operation, it is recommended to switch to an optimized system：https:// w0chp.radio/ wpsd/
SUPPORT: C4FM YSF NXDN DSTAR P25 DMR and default work with UHF. Not compatible with Baofeng UV-5R, Baofeng RD-5R, 5X, 5R+, 5R Plus, etc UV series, BF series. Our test is in DMR mode, if you want to change the working mode, you need to configure it as needed Working mode parameters
[WIFI SSID] Need the 2.4GHz SSID as Pi Zero W doesn't support 5.8GHz. Ensure WiFi Password Type is WPA, not WEP. Power on hotspot for 2 minutes to auto-connect or follow instructions to connect the Hotspot to your router. After power on 2 minutes, go to pi-star /admin/ configure.php

Rank No. #2

AURSINC MMDVM Hotspot Board (V1.5.2) + Antenna Support UHF VHF Support P25 DMR YSF DSTAR NXDN POCSAG for Raspberry Pi-Zero W, 2W, Pi 3, 3B, 3B+, 4 (with OLED)

[Frequency Range] MMDVM hotspot supports UHF VHF, frequency range: 144MHz-148MHz, 420MHz-475MHz, 842MHz-950MHz (depending on ADF7021 and TCXO, HAT firmware amateur radio brand license restrictions)
[Multifunction] Hotspot board saves electricity, High quality TCXO, stable, low BER. Support MMDVM mode DMR / YSF / P25 / NXDN / DSTAR / POCSAG. Support online upgrade, User-friendly OLED and Nextion special design location, reserved for additional installation of Bluetooth modules
[Applicability] AURSINC hotspot board supports Raspberry Pi 4, 3B, 3B +, Pi Zero W, Pi Zero 2W, compatible with NanoPi NEO, Orange Pi, compatible with BlueDV (requires USBtoTTL or Bluetooth model). if you want a little processor power install on Pi 3 or Pi4, this is a great little hat for digital voice modes
When connecting the MMDVM board to a RPi 4, please note: If it works normally, no additional settings are required. If the SVC indicator does not flash, choose one of these methods (refer to the product diagram): 1. Remove the R1 resistor on the hotspot board. 2. Cut off the 2 RPi pin headers on the corners of the board
[Firmware Update] If the Raspberry fails to connect the hotspot board, please try update the firmware of the hotspot board by conducting the command: sudo pistar-mmdvmhshatflash hs_hat. More info pls view: amateurradionotes.com/pi-star-notes.htm#hotspotfwupdate. How to Update MMDVM_HS for WPSD 1.6.1: jumbo5566.github.io

Rank No. #3

C4Labs - JRZ-1S case for Raspberry Pi Zero/Zero W & JumboSPOT or Lonestar MMDVM Simplex

This is case kit. Assembly is required. No components are included.
Full body coverage for Raspberry Pi, JumboSPOT or LoneStar MMDVM Simplex and OLED screen (not waterproof). Note: Raspberry Pi Zero 2 has not been tested for heat issues. Enough room for .96″ OLED screen to be mounted directly to JumboSPOT or LoneStar MMDVM Simplex by customer
Cut outs for easy access to SD card and camera ports
Comes with 2 tops: one with antenna hole and one without
Pin-hole access to boot and reset buttons on top of case

Rank No. #4

AURSINC MMDVM Hotspot Spot Radio WiFi Digital Voice Modem Work Contained with Raspberry Pi Zero W with Firmware V4.1.5 UHF VHF, Supports C4FM YSF NXDN DSTAR P25 DMR (with Ethernet Cable)

[EASY SET UP] Preload sofeware Pi-Star on TF card, no need to download again. Radio Frequency: (UHF:430-440,VHF:144-146) This is upgraded version, do not need to set RXOFFSET and TXOFFSET, they're default 0
[EASY CHARGING] Free micro USB charging cable included, charged with power bank or connect to laptop or computer. The Hotspot will also work mobile in your vehicle if you tether it to your mobile phone network
To speed up the operation, it is recommended to switch to an optimized system：https:// w0chp.radio/ wpsd/. Firmware V1.5.2, the MMDVM hotspot board supports updating to V1.6.1 (How to Update MMDVM_HS for WPSD 1.6.1: jumbo5566 .github.io)
SUPPORT: C4FM YSF NXDN DSTAR P25 DMR and default work with UHF. Not compatible with Baofeng UV-5R, Baofeng RD-5R, 5X, 5R+, 5R Plus, etc UV series, BF series. Our test is in DMR mode, if you want to change the working mode, you need to configure it as needed Working mode parameters
[WIFI SSID] Need the 2.4GHz SSID as Pi Zero W doesn't support 5.8GHz. Ensure WiFi Password Type is WPA, not WEP. Power on hotspot for 2 minutes to auto-connect or follow instructions to connect the Hotspot to your router. After power on 2 minutes, go to pi-star /admin/ configure.php

Rank No. #5

C4Labs Case for JumboSPOT & Pi4, Pi3B+ | Includes 2.4″ Enhanced Nextion Screen (JRPi-1NSX)

Case kit requires assembly. Designed to fit Raspberry Pi 4, 3B+, 3B, 2B, and B+ (not included), and JumboSPOT or N5BOC Lonestar Board. No boards are included.
Includes a 2.4" Enhanced Nextion Touchscreen. Please note that connecting the Nextion screen to your JumboSPOT or LoneStar may require additional soldering of pins or wires which is not covered in the case instructions.
The new inner layers have been designed to fit the Pimoroni Fan SHIM (not included). Heatsinks and rubber feet included.
Designed and Crafted in Tacoma, WA USA

Rank No. #6

Mokxihit MMDVM Hotspot Board Digital Voice Modem Support DMR DSTAR YSF P25 NXDN for Raspbery P Zero W 2w Pi 1 2 3 B Series Two Colors OLED(Board OLED)

High Quality TCXO: The MMDVM Hotspot Board features a high-quality TCXO which ensures a stable and reliable performance with a low BER (Bit Error Rate). This feature is particularly important for users who require high-performance communication.
Zero Txoffset and Rxoffset: The board also comes with zero Txoffset and Rxoffset, which further enhances its reliability and stability in data transmission.
Wide Compatibility: The MMDVM Hotspot Board is compatible with various Raspbery P models, including the Zero W, 2W, Model 1B+, 2B, 3B, and 3B+. This makes it a versatile and flexible option for a wide range of users.
Preloaded Software: The board comes with an 8G TF card that is preloaded with the latest Pi-star software. This saves users the hassle of having to download and install the software themselves.
Easy Configuration: Most configurations are already set up in the TF card, making it easy for users to get started with the MMDVM Hotspot Board without having to go through a complex setup process.

Rank No. #7

GOOZEEZOO MMDVM Hotspot Board (V1.5.2) + Antenna Support UHF VHF Support P25 DMR YSF DSTAR NXDN POCSAG for Raspberry Pi-Zero W, Pi 3 (OLED Board)

Frequency Range: MMDVM hotspot supports UHF VHF, frequency range: 144MHz-148MHz, 420MHz-475MHz, 842MHz-950MHz (depending on ADF7021 and TCXO, HAT firmware amateur radio brand license restrictions)
Applicability: GOOZEEZOO hotspot board supports Raspberry Pi 3B, 3B +, Pi ZERO, compatible with NanoPi NEO, Orange Pi, compatible with BlueDV (requires USBtoTTL or Bluetooth model). if you want a little processor power install on Pi 3 or Pi4, this is a great little hat for digital voice modes
[Multifunction] Hotspot board saves electricity, High quality TCXO, stable, low BER. Support MMDVM mode DMR / YSF / P25 / NXDN / DSTAR / POCSAG. Support online upgrade, User-friendly OLED and Nextion special design location, reserved for additional installation of Bluetooth modules
[Firmware Update] If the Raspberry fails to connect the hotspot board, please try update the firmware of the hotspot board by conducting the command: sudo pistar-mmdvmhshatflash hs_hat. More info pls view: amateurradionotes.com/pi-star-notes.htm#hotspotfwupdate (It can be update the MMDVM firmware version to V1.6.1.)
[Compatible with P4 settings] Since our mmdvm board is defautly setup for Pi-Zero W, Pi 3. and if you do want to connect it with your Pi 4, you could try below methods. PICK ONE. Method 1: Remove the R1 resistance of the hotspot board(single/dual) ; Method 2: Cut off the 2 Raspberry Pi pin headers on the corners of the board ( pick one to operate on your MMDVM board, refer to the product image for the R1 and 2 pin headers locations)

Rank No. #8

AURSINC MMDVM Hotspot Hat Board(V1.5.2) with UHF 433MHz Antenna OLED Display Aluminium Case, MMDVM Pi Hat for Raspbery Pi 3 4 3B 3B+ Zero W Zero 2W Digital Hotspot Ham Radio(Raspberry pi not Included)

MMDVM hotspot supports UHF VHF, frequency range: 144MHz-148MHz, 420MHz-475MHz, 842MHz-950MHz (depending on ADF7021 and TCXO, HAT firmware amateur radio brand license restrictions)
Aursinc mmdvm hat supports Raspberry Pi 4, 3B, 3B +, Pi Zero W, Pi Zero 2W, compatible with NanoPi NEO, Orange Pi, compatible with BlueDV (requires USBtoTTL or Bluetooth model). Great way to roll your own hotspot. Added a Pi Zero 2W, power supply, microSD, and loaded with WPSD. You will have a great simple hotspot, great way to help learn about DMR
Firmware Update: If the Raspberry fails to connect the hotspot board, please try update the firmware of the hotspot board by conducting the command: sudo pistar-mmdvmhshatflash hs_hat(How to Update MMDVM_HS for WPSD 1.6.1: jumbo5566.github.io)
[Multifunction] Hotspot board saves electricity, High quality TCXO, stable, low BER. Support MMDVM mode DMR / YSF / P25 / NXDN / DSTAR / POCSAG. Support online upgrade, User-friendly OLED and Nextion special design location, reserved for additional installation of Bluetooth modules
When connecting the MMDVM board to a RPi 4, please note: If it works normally, no additional settings are required. If the SVC indicator does not flash, choose one of these methods (refer to the product diagram): 1. Remove the R1 resistor on the hotspot board. 2. Cut off the 2 RPi pin headers on the corners of the board

Rank No. #9

Upgraded MMDVM Hotspot Spot Assembled Radio Station OLED Antenna WiFi Digital Voice Modem P25 DMR YSF Raspbery P Zerow

MMDVM hotspot supports D-STAR DMR YSF P25 NXDN POCSAG, enables the different mode of digital two way radio to communicate with each other (YSF2DMR / YSF2NXDN / YSF2P25 / DMR2YSF / DMR2NXDN) and works great in UHF.
HOTSPOT size: 2.8 x 1.3 x 0.9” inch
Setup: Set the same freq as Radio Mobile, for example: 433.550000MHZ. DMR WIFI SSID:pi-star,PASSWORD:raspbery. Need the 2.4GHz SSID as the Pi Zero W. doesn't support 5.8GHz
Power Supply: Mobile charger or a USB cable connected to your computer or laptop..
Best customer services: fully-assembled. The firmware is pre-loaded. Contact us if any question, we will reply within 6 hours. 73.

Rank No. #10

AURSINC MMDVM Hotspot Board (V1.5.2) + Antenna Support UHF VHF Support P25 DMR YSF DSTAR NXDN POCSAG for Raspberry Pi-Zero W, 2W, Pi 3, 3B, 3B +, 4

[Frequency Range] MMDVM hotspot board is the latest firmware. Supports UHF VHF, frequency range: 144MHz-148MHz, 420MHz-475MHz, 842MHz-950MHz (depending on ADF7021 and TCXO, HAT firmware amateur radio brand license restrictions)
[Compatible] Hotspot board support Raspberry Pi 4, 3B, 3B +, Pi Zero W, Pi Zero 2W, compatible with NanoPi NEO, Orange Pi, compatible with BlueDV (requires USB to TTL or Bluetooth model). If you want a little processor power install on Pi 3 or Pi4, this is a great little hat for digital voice modes.
[Support MMDVM Mode] MMDVM board saves electricity, High quality TCXO, stable, low BER. Support MMDVM mode DMR / YSF / P25 / NXDN / DSTAR / POCSAG
[Features] Support online upgrade, user-friendly OLED and Nextion special design location, reserved for additional installation of Bluetooth modules. It can be update the MMDVM firmware version to V1.6.1 (How to Update MMDVM_HS for WPSD 1.6.1: jumbo5566.github.io)
When connecting the MMDVM board to a RPi 4, please note: If it works normally, no additional settings are required. If the SVC indicator does not flash, choose one of these methods (refer to the product diagram): 1. Remove the R1 resistor on the hotspot board. 2. Cut off the 2 RPi pin headers on the corners of the board

Last update on 2025-05-28 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best Jumbospot?

Do you get stressed out thinking about shopping for a great Jumbospot? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Jumbospot, which is why we have assembled a comprehensive list of the greatest Jumbospot available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Jumbospot that you consider buying. Your questions might include the following:

Is it worth buying an Jumbospot?
What benefits are there with buying an Jumbospot?
What factors deserve consideration when shopping for an effective Jumbospot?
Why is it crucial to invest in any Jumbospot, much less the best one?
Which Jumbospot are good in the current market?
Where can you find information like this about Jumbospot?

We’re convinced that you likely have far more questions than just these regarding Jumbospot, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Jumbospot, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Jumbospot. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Jumbospot buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Jumbospot currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Jumbospot has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Jumbospot?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Jumbospot.
Customer Ratings: Number ratings grade Jumbospot objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Jumbospot.
Product Quality: You don’t always get what you pay for with an Jumbospot, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Jumbospot is should be an indication of how long it will work out for you.

We always remember that maintaining Jumbospot information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Jumbospot is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

The Best Jumbospot of 2022 – Reviews & Buying Guide

How Do You Buy The Best Jumbospot?

Related Post: