Skip to content

The Best Mks Gen L Board of 2022 – Reviews & Buying Guide

After hours researching and comparing all models on the market, we find out the Best Mks Gen L Board of 2022. Check our ranking below.

2,400 Reviews Scanned

Rank No. #1
MKS Gen L V2.0 3D Printer Integrated Motherboard Controller PCB Board A4988/DRV8825/TMC2208/TMC2130 Like Ramps 1.6 MKS Gen V1.4 Mainboard 1PCS
  • ❤️ Integrate 2560 and Ramps1.4 one PCB,easier wiring and more stable
  • ❤️Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly
  • ❤️ Support a variety of stepper drivers:4988,8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS
  • ❤️TFT24/28/32/35 & Available to connect external large stepp drivers Accept 24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently
  • ❤️Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces
Rank No. #2
MKS GEN L V1.0 Controller Board 3D Printer Kit Mainboard Ramps1.4 Dual Extruder Touch for 3D Printer Accessories
  • Use CH340 Serial Port Chip -- Stable and reliable filter circuit greatly reduces interference and avoids crashes as possible in the process of printing. Use CH340 serial port chip, more easily install the drive than 16U2.
  • Compatible With -- Support Ramps 1.4, 2004LCD,12864LCD, TFT28 and TFT32. X-axis, Y-axis and Z-axis with different color terminal controls the stepper motors and endstops, which is convenient to wire.
  • Support 24V Input -- The heated bed current can be reduced to 1/4 at the same system power which effectively resolves the problem that the MOSFET of heated bed heats. Run Marlin firmware, the configuration is completely same as Ramps 1.4.
  • Support a Variety of Stepper Drivers -- 2560 and Ramps 1.4 are integrated in the board, which avoids the problem of complicated connectors and malfunctioning. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100, available to change the stepper drivers and motors as users like.
  • Reserve External Driver Signal -- available to connect external high-current driver to drive the 57 and 86 stepper motors. Use high-quality MOSFET, better cooling effect and more stable. Use specific power chip, support 12V-24V power input, and resolve t.
Rank No. #3
Ickiya MKS Gen L V2.1 3D Printer Control Board Motherboard, Open Source Marlin Support TMC2209/TMC2208/TMC2208/TFT35 V3.0/TFT35 E3/BL TOUCH/LCD12684 for Ramps 1.4 /Ramps 1.5/Ramps 1.6 3D Printer
  • ✅Integrate 2560 and ramps1.4 are intergrated on a piece of board, which solves the problem of complicated and easy failure for Ramps1.4 composite interface.Users can change their own motor drive, support A4988/TMC2209/TMC2208/TMC5160/DRV8825 stepper drivers
  • ✅Using CH340 serial chip to ensure the stable and reliable premise, reduce the cost, and to solve the problem of the previous 16U2 hard drive.Using the open source firmware for Marlin, the configuration is exactly the same as for ramps1.4, and can replace for Ramps1.4 directly.
  • ✅24V input can be accepted, and the same system power can reduce the hot bed current to 1/4, effectively solving the hot bed MOS tube heating problem.
  • ✅It can be directly connected to 2004LCD display and 12864LCD display, and can be supported by TFT28 /TFT32/TFT35/TFT50/TFT70 touch screen.
  • ✅The XYZ axis adopts the terminals of different colors to correspond to the motor and the limit switch, and the connection is convenient,reduces the probability of inserting and reversing, and prevents the main board from being damage by the oppsite inserted of the drive.
Rank No. #4
MKS Gen L V2.1 3D Printer Integrated Motherboard Controller PCB Board A4988/DRV8825/TMC2208/TMC2130 Like Ramps 1.6 MKS Gen V1.4 Mainboard
  • Integrate 2560 and Ramps1.4 one PCB,easier wiring and more stable.
  • Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly.
  • Support a variety of stepper drivers:4988,8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS.
  • TFT24/28/32/35 & Available to connect external large stepp drivers Accept 24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently.
  • Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces.
Rank No. #5
Aoicrie MKS Gen L V1.0 3D Printer Integrated Mainboard Controller PCB Board Compatible Ramps1.4/Mega2560 R3 with A4988 Motor Driver for 3D
  • Integrate 2560 and Ramps1.4 one PCB,which designed to avoid complicated connections, easier wiring and more stable Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Run Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly.
  • Use high quality MOSFET tube,better cooling and more stable.Use special power chip,support 12-24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently and power shortage.
  • Support a variety of stepper drivers: A4988,DRV8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS TFT24/28/32/35 & Available to connect external large stepp drivers, A4988 driver board widely used in 3D printers and small CNC machines.
  • Support functions: Non-trace resumption after power off, run out filament ,and auto shut down, XTZ axis with different color terminal controls the motors and end stop,which is convenient to wire.Use high-quality 4 layer PCB&Use special power chip.Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces.
  • Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step.Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor's rated voltage toachieve higher step rates.Use the configuration file to set the driving current mode, avoid manual adjustment of the current to cause the burned drive, convenient, safe and reliable.
Rank No. #6
KOOBOOK 1Pcs 3D Printer Control Board Controller PCB Board MKS Gen L V1.0 Integrate Ramps Motherboard 12/24V
  • 2560 and ramps1.4 are intergrated on a piece of board, which solves the problem of complicated and easy failure for Ramps1.4 composite interface.Users can change their own motor drive, support 4988 drive and 8825 drive, TMC2100 drive.
  • Using CH340 serial chip to ensure the stable and reliable premise, reduce the cost, and to solve the problem of the previous 16U2 hard drive.Using the open source firmware for Marlin, the configuration is exactly the same as for ramps1.4, and can replace for Ramps1.4 directly.
  • 24V input can be accepted, and the same system power can reduce the hot bed current to 1/4, effectively solving the hot bed MOS tube heating problem.
  • It can be directly connected to 2004LCD display and 12864LCD display, and can be supported by TFT28 and TFT32 touch screen.
  • The XYZ axis adopts the terminals of different colors to correspond to the motor and the limit switch, and the connection is convenient,reduces the probability of inserting and reversing, and prevents the main board from being damage by the oppsite inserted of the drive.
Rank No. #7
MKS GEN L V1.0 3D Printer Controller Board Touch Controller Board 3D Printer Kit MKS 3D Printer Board, MKS V1.4 3D Printer, for 3D Printer
  • Support Ramps 1.4, 2004LCD,12864LCD, TFT28 and TFT32. X-axis, Y-axis and Z-axis with different color terminal controls the stepper motors and endstops, which is convenient to wire.
  • Support 24V input, the heated bed current can be reduced to 1/4 at the same system power which effectively resolves the problem that the MOSFET of heated bed heats. Run firmware, the configuration is completely same as Ramps 1.4, and available to
  • Reserve external driver signal, available to connect external high-current driver to drive the 57 and 86 stepper motors. Use high-quality MOSFET, better cooling effect and more stable. Use specific power chip, support 12V-24V power input, and resolve t
  • 2560 and Ramps 1.4 are integrated in the board, which avoids the problem of complicated connectors and malfunctioning. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100, available to change the stepper drivers and motors as users like
  • Stable and reliable filter circuit greatly reduces interference and avoids crashes as possible in the process of printing. Use CH340 serial port chip, more easily install the drive than 16U2.
SaleRank No. #8
3D Printer MKS V1.4, Dual Extruder Controller Board 3D Printer Kit 3D Printer Controller Board 3D Printer Board MKS, 3D Printer MKS GEN L V1.0 for 3D Printer
  • Support 24V input, the heated bed current can be reduced to 1/4 at the same system power which effectively resolves the problem that the MOSFET of heated bed heats. Run firmware, the configuration is completely same as Ramps 1.4, and available to
  • Support 24V input, the heated bed current can be reduced to 1/4 at the same system power which effectively resolves the problem that the MOSFET of heated bed heats. Run firmware, the configuration is completely same as Ramps 1.4, and available to
  • Support 24V input, the heated bed current can be reduced to 1/4 at the same system power which effectively resolves the problem that the MOSFET of heated bed heats. Run firmware, the configuration is completely same as Ramps 1.4, and available to
  • 2560 and Ramps 1.4 are integrated in the board, which avoids the problem of complicated connectors and malfunctioning. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100, available to change the stepper drivers and motors as users like
  • Support Ramps 1.4, 2004LCD,12864LCD, TFT28 and TFT32. X-axis, Y-axis and Z-axis with different color terminal controls the stepper motors and endstops, which is convenient to wire.
Rank No. #9
FYSETC 3D Printer Parts Stepstick Mute TMC2209 V3.1 Stepper Motor Driver UART Mode with Heatsink for Reprap Ram1.4 MKS Gen/SKR V1.3 MKS GEN L Ramps 1.4/1.5/1.6 Control Motherboard-5Pcs
  • TMC2209 V3.1: ultra-silent motor driver, 2020 New Version, compatible to a number of legacy drivers as well as to the TMC2208, Support UART mode, compatible with popular motherboards such as FYSETC S6/F6, MKS SGENL, MKS GENL v2.0, MKS Robin E3D, SKRv1.3/1.4. Heat sink color is random: Blue or Black.
  • Upgrade Tips: add CLK pin, not connect in default, tie to GND via 0R; SPREAD pin is floating. Reserve pull-up and pull-down resistors. Move TX from 3 to 5.
  • Advantage 1: StallGuard for sensorless homing. The integrated power MOSFETs handle motor currents up to 2A RMS with protection and diagnostic features for robust and reliable operation. A simple to use UART interface opens up tuning and control options. Store application tuning to OTP memory.
  • Advantage 2: Industries’ most advanced STEP/DIR stepper motor driver family upgrades designs to noiseless and most precise operation for cost-effective and highly competitive solutions.
  • Advantage 3: Step/Dir Drivers for Two-Phase Bipolar Stepper Motors up to 2.8A peak –StealthChop for Quiet Movement – UART Interface Option –Sensorless Stall Detection StallGuard4.
Rank No. #10
Genuine 12/24V MKS Gen L V1.0 Integrated Ramps 1.4 Control Board Controller Motherboard for 3D Printer Parts Accessories
  • 100% Brand new and good quality.
  • 85% conventional orders will be delivered within 7-18days.Some remote countries will take longer.We provide DHL expedited service. The time limit is 3-7 days. (Excluding preparation time.) If the order amount is more than 150$, we will use the DHL service free of charge.
  • We offer tens of thousands of electronic accessories and modules. You just need to search for keywords in my store.
  • If the packages not be delivered on time or the products may not be satisfactory. You just need to send a refund request, we will full refund for you without asking.
  • We make every effort to provide customers with satisfactory service.

Last update on 2023-03-03 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best Mks Gen L Board?

Do you get stressed out thinking about shopping for a great Mks Gen L Board? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Mks Gen L Board, which is why we have assembled a comprehensive list of the greatest Mks Gen L Board available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Mks Gen L Board that you consider buying. Your questions might include the following:

  • Is it worth buying an Mks Gen L Board?
  • What benefits are there with buying an Mks Gen L Board?
  • What factors deserve consideration when shopping for an effective Mks Gen L Board?
  • Why is it crucial to invest in any Mks Gen L Board, much less the best one?
  • Which Mks Gen L Board are good in the current market?
  • Where can you find information like this about Mks Gen L Board?

We’re convinced that you likely have far more questions than just these regarding Mks Gen L Board, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Mks Gen L Board, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Mks Gen L Board. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Mks Gen L Board buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Mks Gen L Board currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Mks Gen L Board has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Mks Gen L Board?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Mks Gen L Board.
  5. Customer Ratings: Number ratings grade Mks Gen L Board objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Mks Gen L Board.
  7. Product Quality: You don’t always get what you pay for with an Mks Gen L Board, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Mks Gen L Board is should be an indication of how long it will work out for you.

We always remember that maintaining Mks Gen L Board information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Mks Gen L Board is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: