The Best Obd Saver of 2022 – Reviews & Buying Guide
After hours researching and comparing all models on the market, we find out the Best Obd Saver of 2022. Check our ranking below.
2,119 Reviews Scanned
Rank No. #1
Schumacher OBD-L Memory Saver Detector - Save Your Vehicle Settings During Battery Removal
- SAVE ON-BOARD DATA: Save settings and data from your vehicle’s microprocessor-controlled devices when your battery is disconnected
- MEMORY SAVER DETECTION: No-fuss design automatically identifies vehicle compatibility
- FUSE-PROTECTED: Standard fuse-protected aux input plug offers reliable connection
- EASY ATTACHMENT: Attach between a portable power unit and a vehicle’s On-Board Data (OBDII) diagnostic port
- LED INDICATORS: Colored LED indicator lights with printed instructions on the unit for ease of use
SaleRank No. #2
OBD ll Connector Vehicle Memory Saver Reliable and Easy 9 Volt Battery Powered
- Much more reliable than similar 12v Cigarette outlet models -- Assembled in the USA
- Retains radio presets, bluetooth devices, Diagnostic codes and learned procedures up to 2 hours
- Safe voltage blocking diode installed for safe 9 volt battery use
- For maintaining voltage continuity to engine computer, clock and radio memory when vehicle battery is disconnected
- Instructions are included for perfect results ------- Uses 9 volt battery (Not Included)
SaleRank No. #3
SOLAR ESA30 OBD II Memory Saver Connector
- Turns any jump starter with a 12v power port into a memory saver
- Interface connector between a jump starter and a vehicle's OBD II port
- Prevents electronic memory loss when disconnecting a vehicle's battery
- LED confirms a proper connection has been made to the OBDII port
SaleRank No. #4
VSTM OBD II Vehicle ECU Emergency Power Supply Cable Memory Saver (3Meter) with Alligator Clip-On 12V Car Battery Cigarette Lighter Power Extension Socket
- Compared by most of OBD metal pins in market with zinc plating, ours are gold plating. Better reliable on contact and electric transmission. Compared by most of OBD II Memory Saver (or Automotive Computer Memory Saver) in market with 3 ~ 5 ft in cable length, ours with super long 10 ft (3meters) cable. In this way, you can change your car battery, also by get the alternative 12V power source from another car, when you not have a jump starter on hand
- 8 amp fuse built into the memory saver, better reliable on overload protection. Powered by any jump starter with a 12V outlet into an OBD II Memory Saver. Interface connector between a 12V DC power source and vehicle's OBD II port. Preserves vehicle codes and electronic presets. Replacing a car battery on older vehicles used to be simple!! You unhook the old battery and install the new one.
- Late-model vehicles, however, rely on computers that operate everything from the stereo to the transmission. If power is lost to the computer, the settings are lost and have to reset to default. That means the vehicle may feel different when driven, and you may have to enter a security code to access the stereo.
- Using this simple memory saving device when replacing your car battery will help you avoid these problems. This device can work with any 12V DC power source, including jump starter, DC 12V Lead-acid battery, or another car’s DC 12V power outlet.
- As our device with 3 meter cable, it will be a convenient way, should you not have jump starter (or Lead-acid battery) on hand, and the device can also get the 12v power supply from cigarette lighter of another good car. Just insert the Cigarette lighter plug to this car and insert into 16 pin plug to the OBD port of the car you want to replace battery. You can replace the battery.
SaleRank No. #5
OLLGEN 3M/10ft OBD II Vehicle ECU Emergency Power Supply Cable Memory Saver with Alligator Clip-On 12V Car Battery Cigarette Lighter Power Socket Extension Cable
- Cigarette Lighter with Alligator to OBD2 16 Pin Male Connector Power Cable :Powered by any jump starter with a 12V outlet into an OBD II Memory Saver.Plug it into the OBD Male connector of the vehicle, plugging the cigarette connector into the clip cords, hooking it up to a 12V battery source.Note:This device can work with any 12V DC power source, including jump starter, DC 12V Lead-acid battery, or another car’s DC 12V power outlet.
- Super Long 10ft (3meters) Cable: plenty long until you try connecting it to another car's battery or cigarette lighter. In this way, you can change your car battery, also by get the alternative 12V power source from another car, when you not have a jump starter on hand.
- 8 amp fuse built into the memory saver, better reliable on overload protection. Powered by any jump starter with a 12V outlet into an OBD II Memory Saver. Interface connector between a 12V DC power source and vehicle's OBD II port. Preserves vehicle codes and electronic presets. Replacing a car battery on older vehicles used to be simple!! You unhook the old battery and install the new one.
- Work no problem as all ODBII ports :It works on any vehicle with OBDII which is 1996 and later (You will be plugging one end into it). It is not needed or required to change your battery. It is used to keep the memory of you radio setting and other memory computer controlled devices on the vehicle (EMCU for example.) It is used as a convenience as to not erase the memory.
- EASY TO REPLACE :Should you not have jump starter (or Lead-acid battery) on hand, and the device can also get the 12v power supply from cigarette lighter of another good car. Just insert the Cigarette lighter plug to this car and insert into 16 pin plug to the OBD port of the car you want to replace battery.
Rank No. #6
USB/9V Powered OBD Connector Memory Saver for Vehicle Battery Replacement/Disconnect Short/Long Term Memory Storage
- Much more reliable than with similar 12v Cigarette outlet models
- Retains radio presets, Diagnostic codes and ECU learned procedures
- Safe voltage blocking diode installed for safe USB adapter or 9V battery use
- For maintaining voltage continuity to engine computer, clock and radio memory when vehicle battery is disconnected
- Instructions are included for perfect results ------- Uses USB power source or 9V battery(Not included)
Rank No. #7
Schumacher SEC-12V-OBD Memory Saver Adapter Cable - 12V - Save Your Vehicle Settings During Battery Removal
- 3 feet long cable assembly that plugs an external power source into the vehicle's OBDII port
- Lightweight and easily transportable
- Preserves the stored fault codes and programmed electronic settings such as clocks, seat positions, and alarms
Rank No. #8
vgate OBD II Memory Saver Connector with Two 2 Alligator Clips
- 🔋 【Avoid Information Loss】- Prevents electronic memory loss when disconnecting a vehicle's battery. Keep the car computer memory dashboard information, acoustics, memory seats, digital clock etc. Preserves vehicle codes and electronic presets.
- 🔋 【Design】- Red clip link back-up battery positive, negative black negative. Interface connector between a 12V DC power source and vehicle's OBD2 port.
- 🔋 【Easy to Use】Plug and play, Vgate ECU Memory Saver can work with any 12V DC power source, including jump starter, DC 12V Lead-acid battery, or another car's DC 12V power outlet.
- 🔋 【Safety & Protective】- 8 amp fuse built Into the memory saver, better reliable on overload protection.
- 🔋 【Good Quality】- The use of environmentally friendly high-quality materials, no odor non-toxic ingredients, tough and soft wear resistance, not winding, environmental protection and durability.
Rank No. #9
OLLGEN 3M/9.8ft Car OBDII Vehicle ECU Emergency Power Supply Cable Car Memory Save Any 12V DC Power Source OBD Male Connector Cable Adapter
- Cigarette Lighter to OBD2 16 Pin Male Connector Power Cable : This 3m/9.8ft cable is 12V in Male OBD out adapter you can use it to connect to an OBD II in a car.
- Interface connector between a 12V DC power source and vehicle's OBD II port :Compatible all OBD2 diagnostic tools with a 16 pin socket .
- Powered up OBD2 device : This Cigarette lighter to OBD2 16pin male power cable can preserve vehicle codes and electronic presets , and it also can save you radio information.This device can work with any 12V DC power source, including jump starter, DC 12V Lead-acid battery or another car’s DC 12V power outlet.
- Compatible with most of OBD II Memory Saver (or Automotive Computer Memory Saver) in Current Market : Use this to power your HUD without having to plug into OBD port (the HUD usually plugs into the OBD port for power). Use this cable to power any OBD port powered devices that don't need to talk to the car.
- Great Product :High-quality materials can make the cable Sturdy and flexible.
Last update on 2023-02-01 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best Obd Saver?
Do you get stressed out thinking about shopping for a great Obd Saver? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Obd Saver, which is why we have assembled a comprehensive list of the greatest Obd Saver available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Obd Saver that you consider buying. Your questions might include the following:
- Is it worth buying an Obd Saver?
- What benefits are there with buying an Obd Saver?
- What factors deserve consideration when shopping for an effective Obd Saver?
- Why is it crucial to invest in any Obd Saver, much less the best one?
- Which Obd Saver are good in the current market?
- Where can you find information like this about Obd Saver?
We’re convinced that you likely have far more questions than just these regarding Obd Saver, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Obd Saver, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Obd Saver. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Obd Saver buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Obd Saver currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Obd Saver has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Obd Saver?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Obd Saver.
- Customer Ratings: Number ratings grade Obd Saver objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Obd Saver.
- Product Quality: You don’t always get what you pay for with an Obd Saver, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Obd Saver is should be an indication of how long it will work out for you.
We always remember that maintaining Obd Saver information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Obd Saver is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
