The Best offset scope mount of 2022 – Reviews & Buying Guide
After hours researching and comparing all models on the market, we find out the Best offset scope mount of 2022. Check our ranking below.
2,689 (random num) Reviews Scanned
- Dual ring scope mount available for both standard 1 inch and standard 30mm tube rifle scopes
- Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount
- Mounts to any flat top Picatinny rail equipped rifle
- 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
- 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings
- Distinctive offset reversible design allows for added flexibility for scope placement and optimum eye relief. The rings extend forward 1.5 inch from the base and can be mounted in either direction dependent on your preferred scope placement and your mounting system.
- Mounts to any standard Picatinny rail mounting platform | Not compatible with Weaver bases
- High profile in height, 0.8 inches from base of mount to bottom of rings
- Available in 1 inch diameter and 30 mm diameter sizes
- All Monstrum Tactical mount and accessory products are covered by a lifetime guarantee
- Use this cantilever mount for mounting 30 mm telescopic sights.
- The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement.
- The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches (40.39 mm) from the base. Weighs 6.7 ounces.
- Aluminum construction
- Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damaged/defective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance.
- All new rigid unibody design with strategically placed lightening cuts to reduce weight
- A lightweight 3.7 ounces for the inline version to 3.9 ounces for the long offset version- 25% lighter than our previous generation Slim Profile Series scope mounts
- Available in 3 different mount configurations allowing for optimum placement of your optic: Inline Rings, 1 Inch Offset Cantilever Rings, and 2 inch Offset Cantilever Rings. Available in 1 inch, 30 mm, and 34 mm diameter configurations.
- Mounts to any flat top Picatinny equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatinny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil
- All Monstrum products are backed by a lifetime guarantee
- UNIVERSAL MOUNTING SOLUTION - One configuration that you will be fond of is the use of an optic and accessories mounted at a 45-degree angle; With the growing popularity of this configuration, there is a 45-degree Offset Picatinny Rail Mount by TruGlo
- GREAT CONSTRUCTION - This small but significant piece for avid shooters is made using CNC-machined 6061-T6 aluminum for years of service; Constructed with a slim design 45-degree Offset Picatinny Rail Mount minimizes weight and bulk
- GUN COMPATIBILITY -This universal tactical piece mounts easily to standard Picatinny / 1913 / Weaver-style rails bringing the versatility of 45-degree installation; It mounts in any configuration: left or right side, top, or bottom rail
- ACCESSORY COMPATIBILITY - Designed to accommodate a diversity of tactical gear, this 45-degree offset mount is ideal for mounting lights or lasers without blocking optical sight; It is also great for backup optics and other rail accessories
- BEST PERFORMANCE - Angled mount provides a fast transition to the backup optic allowing instant change of aiming tactic; In addition to this flexibility, the design style & look of this universal sight mount will really strike you as sleek & versatile
- 1 Inch Scope Mount: CVLIFE 1" scope mount is suitable for scopes with a diameter of 1", the spacing between the rings is 2.36", the center to base height is 1.57", base length is 3".
- Hold Well Zero: Two screws on each side of the ring provide a recoil-resistant grip to your scope, with great alignment between the front and rear rings. It has four fastening recoil lugs for tight mounting on the picatinny rail, which can hold your optic very securely.
- Offset Cantilever Mount: Scope mount features a 2.4" forward extension, which can provide better head placement flexibly and find proper and correct eye relief, increasing comfort and reducing fatigue, which is important for all-day use.
- Lightweight Material: This offset dual ring scope mount is made of 6061 aviation aluminum material and weighs only 5.8 oz, which doesn’t add much extra weight to you.
- Torx Screws: Strong torx screws allow for precise tightening and reduce stripping. Comes with spare 4 torx screws, which can be replaced at any time, increasing durability and service life.
- Dual ring scope mount for mounting standard 30 millimeter diameter tube rifle scopes to Picatinny equipped rifles
- Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount
- Attaches and detaches easily via integrated quick release mechanism, without additional tools or tightening
- 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
- 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings
- Dual ring scope mount for mounting standard 1 inch tube rifle scopes
- Mounts to any flat top Picatinny rail equipped rifle
- 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
- Lightweight 6061 grade aluminum construction
- All Monstrum products are backed by a lifetime guarantee
- Monstrum Low Profile Series Offset Scope Mounts offer the same ruggedness and reliability as our previous scope mounts but with a new low profile design allowing you to mount your scope as close to the barrel as possible
- Low Profile Series mounts have a 1.0 inch center height - measured from the top of the receiver rail to the center of the scope rings - versus a 1.5 inch+ center height for our other offset scope mount models
- Low profile scope mounting allows for a tighter cheek weld and provide closer alignment between your optic and the bore of the barrel giving you more precise targeting, particularly at closer distances
- Low Profile Series mounts are built specifically for LPVOs or slender scopes with a smaller objective bell and eyepiece - it will not provide enough clearance over the receiver for scopes with an objective bell diameter of greater than 2 inches. Please measure the dimensions of your scope before purchasing.
- Picatinny base mounts to any standard Picatinny mounting platform with custom Picatinny locking bolts that slot seamlessly into rail slots with zero wiggle for maximum gripping surface
- package dimensions :5.6 cm L x 8.0 cm W x 18.4 cm H
- Product type :SPORTING GOODS
- country of origin:China
- Package weight :3.0lbs
- Designed with Significant Lightening Cuts to Massively Reduce Weight Without Compromising Durability
Last update on 2024-08-30 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best offset scope mount?
Do you get stressed out thinking about shopping for a great offset scope mount? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching offset scope mount, which is why we have assembled a comprehensive list of the greatest offset scope mount available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for offset scope mount that you consider buying. Your questions might include the following:
- Is it worth buying an offset scope mount?
- What benefits are there with buying an offset scope mount?
- What factors deserve consideration when shopping for an effective offset scope mount?
- Why is it crucial to invest in any offset scope mount, much less the best one?
- Which offset scope mount are good in the current market?
- Where can you find information like this about offset scope mount?
We’re convinced that you likely have far more questions than just these regarding offset scope mount, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for offset scope mount, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible offset scope mount. Make sure that you are only using trustworthy and credible websites and sources.
We provide an offset scope mount buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available offset scope mount currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of offset scope mount has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an offset scope mount?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your offset scope mount.
- Customer Ratings: Number ratings grade offset scope mount objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their offset scope mount.
- Product Quality: You don’t always get what you pay for with an offset scope mount, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an offset scope mount is should be an indication of how long it will work out for you.
We always remember that maintaining offset scope mount information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding offset scope mount is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
Related Post:
- offset piano hinge
- 45 Degree Offset Sights
- International Holster Belt Paddle Drop Offset Holster Comp Tac
- Wusthof Gourmet Offset Slotted Spatula 6 1 2 Inch
- Tekton 3 Pc Offset Screwdriver Set
- Grand Patio Deluxe 10 Ft Curvy Aluminum Offset Patio Umbrella
- Offset Cake Knife
- Offset Table Legs
- Fire Basket For Offset Smoker
- Wusthof Gourmet Offset Slotted Spatula
