Skip to content

The Best Ps4 Fightstick Pcb of 2022 – Reviews & Buying Guide

After hours researching and comparing all models on the market, we find out the Best Ps4 Fightstick Pcb of 2022. Check our ranking below.

2,969 Reviews Scanned

Rank No. #1
Brook Universal Fighting Board (UFB) - Pre-installed header version, Arcade Stick PCB For XB Series X/S, XB One, 360, PS4, PS3 Consoles and PC, Upgradable with UFB-UP5
  • Multi-console support PS5 (With UFB-UP5)/Xb Series X/S/ Xb One / Xb 360 / PS4 / PS3 / PC / Wii U / PS Mini / MD mini. Backward-compatible PS4 games are playable on your PS5 console
  • Compatible with Brook UFB-UP5 upgrade Kit. Connect UFB-UP5 with Brook UFB, you can play PS5 fighting games on your Fightsticks
  • Build in SOCD cleaner. Headers are included. PS4 controller touchpad button simulation
  • No 8-minutes timeout issue on PS4. Effortless installation(Screw terminal block for easy connections) and Upgradable firmware
  • Console auto detection(PS3 / PS4 / Xb 360 / Xb One) and Console manual selection(PS4 / PS3 / Xb One / Xb 360 / Wii U / PS classic / MD mini)
SaleRank No. #2
Brook PS4+ Audio Fighting Board - Pre-installed header version, Arcade Stick PCB for PS4, PS3, Switch Consoles and PC, Upgradable with UFB-UP5
  • Multi-console support: PS4/ SWITCH/ PS3/ PC(X-input). Auto-Detect to specific console, compatible with UFB-UP5
  • Supports PS4 audio via headphone jack (note: PS4 audio only, not compatible with PS5, PS3 or Switch). Support Turbo function and LS/DP/RS Stick Mapping. PS4 controller touchpad button simulation.
  • Screw Terminal Block for easy installation, 20-pin Connector for plug
  • Enable or Disable SOCD Cleaner Functionality(Can turn off the SOCD mode that makes you disqualified in Tournament) and Dual Analog Stick Functions.
  • Support Brook UFB-UP5 PS4+Audio Fighting Board is supported by UFB-UP5 to play PS5 Fighting games on it!
Rank No. #3
Brook P5 Plus Fighting Board - Pre-Installed Header Version, Lightning-Quick Response Times to Dominate The Fight. Arcade Stick PCB for PS5 Fighting Games, PS4, PS3, Switch and PC(X-Input) Consoles
  • 【Introducing the Brook P5 Plus Fighting board !】: Say goodbye to tedious welding and hello to extreme gaming precision. With an astonishing latency speed of just 0.8 ms, this Brook fighting board takes your gameplay to the next level.
  • 【Supports Consoles】: Compatible with PS5(Fighting games only)/PS4/PS3/Switch and PC(X-Input), it seamlessly integrates with your favorite consoles. The four different player LEDs and auto-detect gaming consoles ensure a seamless and immersive experience. Noted: Please visit our website to check the list of PS5 fighting games that are supported.
  • 【A frame ?】: Never miss a frame of the action with an ultra-low 0.4ms response time. Fight like a pro with the Brook P5 Plus Fighting board. This arcade stick PCB delivers extremely low latency with speeds of just 0.4 ms, so you can pull off quick combos and react instantly. It's firmware-upgradable to ensure you always have the latest features and compatibility updates.
  • 【SOCD&LS/RS/DP Modes】: With support for four SOCD modes and auto-save functionality, customization is a breeze. Switch effortlessly between LS/RS/DP modes and take advantage of the turbo function. Plus, with firmware upgradability, you'll always stay ahead of the competition. Upgrade your gaming setup today with the Brook P5 Plus Fighting board - Pre-Installed Header Version and unleash your true fighting potential!
  • 【Package Includes】: Brook P5 Plus Fighting board - Pre-Installed Header Version*1, Brook inside sticker*1
Rank No. #4
MAYFLASH F300 Arcade Fight Stick Joystick for Switch, Xbox Series X, PS4,PS3, Xbox One, Xbox 360, macOS, Windows, Steam Deck, NeoGeo mini, NeoGeo Arcade Stick Pro
  • Compatible with Switch, PS4, PS3, Xbox Series S/X, Xbox One, Xbox 360, PC Windows, macOS, Steam Deck, Android, NeoGeo mini.
  • Compatible with Sanwa Denshi buttons and joystick that is perfect for customization
  • Supports the XINPUT and DINPUT when being used on PC
  • Supports the Turbo functions with different speed settings.
  • F300 is compatible with PS5 by MAYFLASH Magic-S Ultimate adapter or third party PS4 Controllers.
Rank No. #5
PXN Arcade Fight Stick 0082 Fight Stick Arcade Game Fighting Joystick PC with Turbo/Macro Functions Compatible with PC, PS4, PS3, Xbox One, Xbox Series X|S, Android TV Box, Switch
  • 【WIDE COMPATIBILITY】: The arcade joystick game controller supports multiple system platforms, whether it is Android phones, tablets, TV, set-top boxes, PC computer emulators, or Switch, Xbox One, Xbox Series X|S, and other game consoles so that you will not restrict the fun of the game because of the game platform. (OTG converter needs to be purchased separately)
  • 【HIGH-PERFORMANCE】: Standard 8 arcade-like buttons and high wear-resistant steel joysticks, the buttons use the strongest sense of paragraph green axis (mechanical keyboard axis), with an excellent sense of confirmation and feedback; 8 directions The metal pillar of the joystick does not only bring higher stability but also has a longer service life. It can support the interchange of joystick and arrow keys according to the type of game.
  • 【SLIP-RESISTANT RUBBER BASE】: The bottom of the PXN joystick adopts 4 powerful suction cups, which can make the bottom of the joystick strongly adhere to the desktop, and prevent the joystick from sliding during the game. The arcade joystick uses a metal joystick that is as thick as an adult man’s pinky finger. It will be very reliable during the game, so you don’t have to worry about breaking the joystick if you use too much force.
  • 【EXQUISITE DESIGN】: The ergonomic design is used to simulate the joysticks and buttons on the arcade machine. The skinned wrist rest design is very soft to the touch, so you won't get calluses on your wrist during intense gaming. An arrow key or D-pad can change the switch of the large joystick mode, depending on the type of game.
  • 【MULTI-FUNCTION BUTTON】: Home button, Share button, Options button, L3/ SL button, and R3/ SR button can match the function buttons of the game console, and support Turbo, Macro; support X-input and D-input when used on a PC. The arcade joystick is compatible with most arcade games: Street Fighter, King of Fighting, Mortal Kombat, Iron Fist, etc.
SaleRank No. #6
HORI PlayStation 5 Fighting Stick Alpha - Tournament Grade Fightstick for PS5, PS4, PC - Officially Licensed by Sony
  • High-end pro fight stick for PlayStation 5, PlayStation 4 and PC
  • Opens for easy customization and maintenance
  • Replaceable top-panel artwork
  • Hayabusa buttons and joystick
  • Officially Licensed by Sony
Rank No. #7
ElecGear 4x Replacement Joystick (EL1 ALPS 10K) + 4x Drift Fix PCB for PS4 Wireless Controller, Analog Stick Controller Sensor Assembly Thumbstick Module for PlayStation 4, Slim and Pro
  • [EL1 ALPS 10K for PS4 Controller] – 4x replacement analog joystick work with PlayStation DualShock 4 controllers. The thumbstick module was made by ALPS. This RKJXV stick controller series comes with 10KΩ trimmer potentiometers. EL1 is widely used in PS4, Slim and Pro controllers and other brands like ‘Scuf’ and ‘Raiju Ultimate’
  • [Compatibility] – We offer two ALPS models for PS4 and PS5. The difference is the resistance value of the potentiometer. Normally, you can distinguish them from the color of the side plastic. EL1 is 10K ohm in gray, while EL6 is 2.1K in black or Green. We strongly suggest measuring the resistance value before ordering
  • [Additional Resistor] – Complicated moving mechanism and daily wear and tear finally caused drifting. Even new sensors cannot be 100% balanced. Calibrating in controller settings might not work. We packed 10x correction resistors to solve the potential problem in hardware level. Solder one or two paralleled tiny resistors onto the potentiometer at the opposite direction against drifting. It will help correct 3 to 5 degrees drifting
  • [When to replace] – The analog joystick needs to be replaced when your controller has the problem of drifting, creeping, stuttering, a blind spot, a dead spot, a dead zone, no reaction when clicking, or it wouldn't center after years of wear and tear. The OEM genuine repair parts ensure accuracy and prolong lifespan
  • [Reminder of DIY] – With as many as 14 prongs, de-soldering and soldering the whole module takes serious skills. We suggest replacing the potentiometers first to solve most of the joystick problems. To desolder the entire joystick module off PCB by a normal soldering iron, please take a look at the desoldering kit at product ID: B0BK7169M8
Rank No. #8
ElecGear 8X ALPS 2.1K Replacement Potentiometer + 4X Drift Fix PCB for PS5 DualSense, PS4 DualShock 4 Wireless Controller, Trim Pot Resistor Thumbstick Module Sensor for ALPS Analog Joystick
  • [ALPS 2.1KΩ Potentiometer] – The OEM trim pot resistor was made by ALPS. It fits ALPS analog joysticks. This trimmer potentiometer works with PS5 DualSense and some PlayStation 4 DualShock 4 wireless controllers with 2.1K ohm ALPS thumbstick module inside
  • [Compatibility] – ALPS sensors come in two different resistance values. Make sure the value is around 2.1K before ordering. Never judge its value by its color. (Be noticed: Choose 10KΩ version for most PS3, PS4, Xbox One, Elite Series 1 and 2, Xbox Series S|X and Switch Pro controllers. ALPS version is not interchangeable with the orange version made by FU.)
  • [Additional Drift Fix PCB] – Several factors cause joystick drifting a common issue. Even new joysticks can drift. The potentiometer was born without precision. Wear to the carbon film, spring fatigue and material stretching made it not centered. Dust, moisture and drop make it worse. We packed PCB to fix the problem of drifting in one direction. Simply adjust the variable resistor to eliminate the drifting
  • [For most joystick problem] – The potentiometer sensor needs to be replaced when the controller has the problem of creeping, stuttering, a blind spot, a dead spot, a dead zone, or it wouldn't center after years of wear and tear. De-soldering the unit with only 3Pins will be a lot easier than replacing the entire joystick with as many as 14 prongs
  • [Reminder of Replacement] – Use a pair of pliers to separate the problem sensor off the joystick module. Try to replace the wiper first, see if it works. De-solder the sensor off the PCB. A metal pick helps to clear the holes. Soldering the new unit in is a breeze. Remember to calibrate the new control sticks in settings
Rank No. #9
ElecGear Hall Joystick Kit Replacement for DualShock PS4 Controller, 2X Hall Effect Control Stick + 2X Calibration PCB + Desoldering Repair Tools for Analog Stick Thumbsticks – HL-PS4
  • [2x Hall Effect Joysticks for PS4] – Hall thumbsticks Replacement for PS4 controller (DS4). With the electromagnetic hallstick sensors inside, the control stick delivers higher sensitivity and accuracy. No more wear of traditional carbon film resistor, say goodbye to drifting. (🔺Warning: Never use DS Tools on Github for it does not work with this MCU.)
  • [2x Added-on Calibration PCB] – The tiny PCB was designed to stack on the back of main board. The moving signal is input to the high speed MCU. The calibrated signal outputs to the main board of controller. Connect the controller to a PC with a USB cable. You can fine reset the center and trim the curve via a web link. The accurate centering with no drift is essential for FPS aiming
  • [Desoldering Tools included] – A copper heating plate melts all the solder joints simultaneously simply with a soldering iron. Solder Wick, Holes Cleaner and simple PCB holder included. With as many as 14 prongs, removing the old problem stick is the most difficult task. It might is not suitable for newbies, though we added these helping hand in the kit
  • [Compatibility and Reminder] – 1. Please carefully study the images for compatible controller. 2. The soldering iron must be more than 60W. And the operation takes serious soldering skill and devices to desolder the old stick off the PCB. 3. Seriously follow the steps we presented on the installation guide for this kit is novel and tricky. 4. 🔺Attention: When calibrating, wait at least 3 seconds after unplugged the USB cable before you plug it in again to re-power on the DS4 controller
  • [What’s in box Model: HL-PS4] – 2x Hall Joysticks, 2x Calibration PCB, 1x Heating Plate, 1x Solder Wick. (🔺Teardown screwdriver tools, USB input cables and wired/wireless controllers, other soldering tools and materials are required, however NOT included.)
Rank No. #10
NACON Daija Arcade Fight Stick Officially Licensed for PlayStation PS5, PS4 and Windows 10 | 11 PC
  • FIGHT LIKE A PRO: Nacon Daija arcade stick officially licensed for PlayStation PS4|PS5 and PC was developed in collaboration with professional gamers and designed for top fighting games like Soulcalibur, Street Fighter, Dead or Alive, Tekken, Mortal Kombat, Dragon Ball, and Guilty Gear Strive
  • SANWA JOYSTICK & ACTION BUTTONS: A leading brand among professional fighting game players and a guarantee of premium quality and durability
  • FULL BUTTON MAPPING: Buttons are fully configurable using the Nacon Daija Arcade Stick software on PC and Mac; you can easily create game profiles with the intuitive and user-friendly software
  • COMFORT & PRECISION: Textured palm rest provides sturdy and comfortable support so you can remain at the top of your game for as long as possible; switch between two different joystick heads to choose the best solution for perfect control and precision
  • LOCK FUNCTION: Enable the button lock feature to prevent accidental presses and avoid interrupting intense fights

Last update on 2025-03-18 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best Ps4 Fightstick Pcb?

Do you get stressed out thinking about shopping for a great Ps4 Fightstick Pcb? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Ps4 Fightstick Pcb, which is why we have assembled a comprehensive list of the greatest Ps4 Fightstick Pcb available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Ps4 Fightstick Pcb that you consider buying. Your questions might include the following:

  • Is it worth buying an Ps4 Fightstick Pcb?
  • What benefits are there with buying an Ps4 Fightstick Pcb?
  • What factors deserve consideration when shopping for an effective Ps4 Fightstick Pcb?
  • Why is it crucial to invest in any Ps4 Fightstick Pcb, much less the best one?
  • Which Ps4 Fightstick Pcb are good in the current market?
  • Where can you find information like this about Ps4 Fightstick Pcb?

We’re convinced that you likely have far more questions than just these regarding Ps4 Fightstick Pcb, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Ps4 Fightstick Pcb, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Ps4 Fightstick Pcb. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Ps4 Fightstick Pcb buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Ps4 Fightstick Pcb currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Ps4 Fightstick Pcb has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Ps4 Fightstick Pcb?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Ps4 Fightstick Pcb.
  5. Customer Ratings: Number ratings grade Ps4 Fightstick Pcb objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Ps4 Fightstick Pcb.
  7. Product Quality: You don’t always get what you pay for with an Ps4 Fightstick Pcb, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Ps4 Fightstick Pcb is should be an indication of how long it will work out for you.

We always remember that maintaining Ps4 Fightstick Pcb information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Ps4 Fightstick Pcb is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: