Skip to content

The Best raised scope mounts of 2022 – Reviews & Buying Guide

After hours researching and comparing all models on the market, we find out the Best raised scope mounts of 2022. Check our ranking below.

2,083 Reviews Scanned

Rank No. #1
Modkin 1'' Weaver Scope Rings, Rifle Scope Mount High Profile Scope Mounts for Picatinny/Weaver Rail (1 inch, Set of 2)
  • Sturdy 1'' scope ring mount for Picatinny/ Weaver Rail (21 mm).
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope.
  • Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
  • The ring is for most scopes which are in 1''/ 25.4 mm scope tube. High profile, 0.98'' gap from base of mount to bottom of rings. ( Item height: 2.1'')
  • With only 1 rail clamp screw and 1 scope clamp screw per side, just twist off the nut and mount the base on the 20 mm rail easily.
Rank No. #2
Vortex Optics Hunter 1-inch Riflescope Rings - High Height (1.22 inches), Matte Black
  • These Vortex Hunter Rings position the center of the riflescope tube at a height of 1.22 inches (31.0 mm) from the base.
  • Mounting to a Picatinny or Weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups. Do not recommend the Hunter Rings for use on heavy recoiling rifles.
  • Made from aircraft-grade 6061-T6 aluminum for optimum strength. Torque Specs: Base Clamp Screws-25-30 in/lbs, Ring Screws-15 in/lbs.
  • Sold two rings per package.
  • Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damaged/defective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance.
Rank No. #3
CVLIFE 1 Inch Scope Rings High Profile Mounts - Compatible with Weaver and Picatinny Rails - 20mm See Through Rifle Scope Mount - 2 Pieces
  • Solid High Picatinny Scope Rings: 1 inch scope rings position the center of the scope tube at a height of 1.5 Inches from the base. 1 inch diameter scope rings are compatible with Weaver and Picatinny rails
  • Lightweight See-Through Solid Scope Mounts: Made of aircraft-grade 6061-T6 aluminum alloy with a black anodized finish, sturdy and lightweight. The see-through design is very lightweight and provides potential visibility
  • Optics Rings with Tape Protection: The tape prevents the scope from being scratched and prevents the scope from moving forward due to recoil
  • Easy and Precise Mounting: scope rings with 1 rail clamp screw and 2 scope clamp screws, quick and easy to install. Precision and repeatable alignment
  • Ideal 1" CVLIFE Scope Mounts: The package includes two riflescope rings and a wrench. Each ring weighs 1.3 oz. Compatible accessoies for: Airsoft, 10/22, Rimfire, .22 Pellets, .22lr, .177, .17 hmr
SaleRank No. #4
Monstrum ZR255 H-Series V2 Ultralight Offset Picatinny Scope Mount | 1 inch Diameter
  • Dual ring scope mount for Picatinny rail platforms available for both 1 inch and 30 mm tube diameter rifle scopes
  • Hollow frame design weighs in at 4.3 ounces - 30% lighter than our previous generation scope mount models
  • Two inches of forward offset for flexible scope positioning and optimum eye relief
  • Uses hardened steel Torx mounting hardware to prevent stripping of the bolts
  • All Monstrum mounts and accessories come with a lifetime warranty
Rank No. #5
Pinty Riser Rail Mount 2 Pack 3 Slot Slanted Riser Scope Mount for 20mm Base Picatinny Weaver Dovetail Rail Slanted Riser Mount for Rifle Pistol Airsoft Flashlights Laser Sights and More, Set of 2
  • SET OF TWO: Pinty's 2 slanting riser mounts hook onto 20mm Picatinny, Weaver, and dovetail rails, allowing you to attach your red dot scopes, lasers, and other hunting and shooting accessories with just the right amount of clearance over your front sights for optimal positioning
  • RAISE IT UP: Our new slanted riser mounts incorporate a hollow-body design to give you the same heavy-duty strength with less weight and more utility
  • LOCK IT DOWN: The redesigned locking nut fastens securely via screwdriver, wrench, or even hand to hold your mount securely under even heavy recoil
  • DURABLE CONSTRUCTION: These tactical riser mounts are constructed from sturdy 6063 aluminum alloy anodized to provide superior strength and corrosion-free performance; the locking nut's heat treatment offers similar power and durability
  • SATISFACTION GUARANTEED: Pinty backs both of these handgun and rifle attachments with our usual strong warranty and friendly 24/7 customer service, ensuring you'll enjoy their use for years to come!
Rank No. #6
Modkin Scope Rings, Rifle Scope Mount High Profile Scope Mounts for Picatinny Rail (1 inch, Set of 2)
  • Sturdy scope ring mount for Picatinny/ Weaver Rail (21 mm).
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope.
  • Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
  • The ring is for most scopes which are in 1 inch / 25.4 mm scope tube. High profile, 0.71 inch gap from base of mount to bottom of rings. ( Item height: 2 inch)
  • With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1 inch scope firmly, just twist off the nut and mount the base on the 21 mm rail easily.
Rank No. #7
Monstrum Lockdown Series Lightweight Riser Mount | High Profile | 5.5 inch L / 13 Slot
  • Single piece machined aluminum with a hollow body profile, designed to shave precious ounces of weight off your rifle build
  • Redesigned locking nut fastens securely via hand, screwdriver, or wrench and is guaranteed to hold zero against the heaviest of recoil
  • 5.5 inches in length with 13 Picatinny rail slots, accepts all Picatinny or Weaver based scopes, red dots, or optics
  • High profile mount provides 0.92 inches of rise
  • All Monstrum Tactical Lockdown Series Riser Mounts come with a lifetime warranty
SaleRank No. #8
CVLIFE Cantilever Scope Mounts, 7075 Aluminum Scope Mount 1 inch with 2.8" Ring Space, Offset Dual Ring One-Piece Scope Mount for Long Scope
  • High Strength: This CVLIFE scope mount is made of 7075 Aluminum. Compared with conventional 6061 aluminum, it has higher tensile strength and shear strength, can better resist impact, prevent displacement, and hold zero well.
  • Hard Anodized Finish: This offset scope mount adopts the hard anodized finish process, which has higher wear resistance and corrosion resistance, provides better protection in various harsh outdoor weather, and will not deform after long-term use.
  • Lightweight and User-Friendly Design: The two rings adopt a wider and thicker design to better grip the scope and ensure the stability of the cantilever mount. The hollow design in the middle appropriately reduces the weight, making the whole body lighter without adding extra weight.
  • Comes with Torx Mounting Hardware: Includes T25 torx wrench and additional 4 T25 torx screws. Base torque: 30 in/lbs, ring torque: 18 in/lbs.
  • Specifications: The one piece scope mount features a 2.8'' ring spacing, 1.57'' ring center height, and 3.56'' base length. Available in 1 inch, and 30mm and are compatible exclusively with picatinny rails.
Rank No. #9
Monstrum High Profile Picatinny Scope Rings with See-Through Base | 1 Inch Diameter
  • High profile scope rings for the Picatinny mounting platform with a see-through channel to allow for concurrent usage of the front iron sights
  • Available in 1 inch and in 30 mm diameter versions. Please check the tube diameter of your scope before purchasing.
  • Mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil.
  • Uses hardened steel Torx mounting hardware to prevent stripping of the bolts
  • All Monstrum mount and accessory products come with a lifetime guarantee
Rank No. #10
Monstrum High Profile Picatinny Riser Mount (1" H x 5.7" L), for Scopes and Optics
  • 1-inch-high riser mount for scopes and optics, allows for sight clearance over front sights
  • 5.7 inches in length, Picatinny rail mount, will accommodate all Picatinny or Weaver standard scopes, red dots, and optics
  • See through design for use with iron sights
  • Sturdy and lightweight, 6 ounces in weight, crafted from aircraft grade aluminum
  • All Monstrum Tactical mount and accessory products come with a lifetime guarantee

Last update on 2024-08-28 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best raised scope mounts?

Do you get stressed out thinking about shopping for a great raised scope mounts? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching raised scope mounts, which is why we have assembled a comprehensive list of the greatest raised scope mounts available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for raised scope mounts that you consider buying. Your questions might include the following:

  • Is it worth buying an raised scope mounts?
  • What benefits are there with buying an raised scope mounts?
  • What factors deserve consideration when shopping for an effective raised scope mounts?
  • Why is it crucial to invest in any raised scope mounts, much less the best one?
  • Which raised scope mounts are good in the current market?
  • Where can you find information like this about raised scope mounts?

We’re convinced that you likely have far more questions than just these regarding raised scope mounts, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for raised scope mounts, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible raised scope mounts. Make sure that you are only using trustworthy and credible websites and sources.

We provide an raised scope mounts buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available raised scope mounts currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of raised scope mounts has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an raised scope mounts?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your raised scope mounts.
  5. Customer Ratings: Number ratings grade raised scope mounts objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their raised scope mounts.
  7. Product Quality: You don’t always get what you pay for with an raised scope mounts, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an raised scope mounts is should be an indication of how long it will work out for you.

We always remember that maintaining raised scope mounts information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding raised scope mounts is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: