The Best Totalboat Epoxy Fairing Compound of 2022 – Reviews & Buying Guide

After hours researching and comparing all models on the market, we find out the Best Totalboat Epoxy Fairing Compound of 2022. Check our ranking below.

2,933 Reviews Scanned

Rank No. #1

TotalBoat-409337 TotalFair Marine Epoxy Fairing Compound for Fiberglass, Wood, Aluminum and Steel (Gallon Kit)

HIGH-STRENGTH, LIGHTWEIGHT TWO-PART EPOXY FILLER smooths out the rough spots and fills the voids; ideal for filling and fairing dents, holes and gouges on your boat, canoe or other watercraft. Marine-grade putty is also great for home, rv and auto repair
SUPER SMOOTH FINISH FOR PERMANENT, WATERPROOF REPAIRS: Marine filler bonds strongly to damaged areas and cures without pinholes on wood, aluminum, steel and fiberglass repair areas; cured TotalFair is waterproof; use above and below the waterline
EASY TO MIX AND APPLY: Foolproof 1 to 1 mix ratio - just mix the blue and yellow components until they turn green. Creamy smooth consistency makes it easy to spread and feather to a fine edge; won't sag on vertical and overhead surfaces
CURES FAST. EASY TO SAND AND PAINT: Quick-drying compound is ready to sand in just 3 hours at 80°F; cured fairing compound sands easily; compatible with latex and epoxy primers and paints
CHOOSE KIT SIZE: 2-PINT KIT, 2-QUART KIT or 1-GALLON KIT. NOTE: TotalBoat Gelcoat should not be applied directly over TotalFair or gelcoat will not cure properly. Before applying gelcoat, apply TotalBoat 2-Part Epoxy Primer or TotalProtect over TotalFair

Rank No. #2

TotalBoat - 512949 Polyester Fairing Compound (Quart Kit)

PREMIUM MARINE-GRADE 2-part polyester fiberglass filler and fairing compound for cosmetic repairs on gelcoat, fiberglass and other composite surfaces above the waterline; fill pinholes, print-through, spider cracks, sanding marks & other surface defects
VERSATILE FIBERGLASS FAIRING COMPOUND has multiple uses, including repairing fiberglass parts & molds, and quick cosmetic repairs to fiberglass decks and hulls
EASY TO APPLY by trowel or spreader; buttery consistency spreads smoothly to a feathered edge, and won't sag on vertical surfaces; ideal as a finishing putty over high-strength TotalBoat Polyester Structural Repair Putty
CURES FAST, EASY TO SAND: Fast-setting fairing filler cures in just 20-30 minutes at 77°F, with minimal shrinkage and no pinholes; easy to sand smooth in preparation for gelcoat or primer and paint
AVAILABLE IN 2 SIZES: QUART KIT AND GALLON KIT: Each includes MEKP catalyst; At 77°F, add 14-16 drops of MEKP to one ounce of TotalBoat Polyester Fairing Compound for a working time of 10-15 minutes, with a cure time of roughly 20-30 minutes

Rank No. #3

TotalBoat - 512952 - Polyester Structural Repair Putty - Marine Grade Long Strand Fiber Fiberglass Reinforced Filler for Boat and Automotive Repair (Gallon Kit)

PRE-THICKENED FIBER REINFORCED POLYESTER PUTTY for high-strength structural filling, fitting, bonding, bedding & radius forming; great for boat building & repair on fiberglass, wood, metal, polyester laminates & core materials; use above or below waterline
MARINE FILLER has premium polyester resin and long strand glass fibers for strength, impact resistance & elasticity; ideal for bonding decks, stringers & liners to hulls; filleting and bonding bulkheads, and filling screw holes, bolt holes, chips & dents
EASY TO MIX, EASY TO APPLY: For a 100g mass, catalyze with 1% MEKP to get 15-20 min. of working time at 70°F (14 drops of MEKP per ounce of putty); adjust amount of catalyst to control working time; paste-like consistency is easy to spread and won’t sag
FAST-SETTING STRUCTURAL ADHESIVE is ideal for fiberglass & gelcoat repair; for cosmetic fairing, overcoat Polyester Structural Repair Putty with TotalBoat Polyester Fairing Compound; it sands smooth easily & can be finished with TotalBoat Gelcoat with wax
AVAILABLE IN QUART AND GALLON KITS: Includes 2 oz. MEKP. This versatile bonding compound can bond dissimilar materials and can also be used in many home, auto, construction, and aerospace applications, with no shrinking or cracking, even in bulk fillings

Rank No. #4

TotalBoat - 405721 Thixo Fast Cure 2:1 Epoxy System

Powerful, fast curing 2:1 thickened epoxy adhesive
Excellent adhesive for wood, metal, or fiberglass
Dispenses perfectly mixed epoxy every time via innovative mixing tips (2 included per tube)
Cures 3 times faster than Thixo or other thixotropic epoxy adhesives on the market
185 Ml cartridge fits standard caulk guns

Rank No. #5

TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood, White, 1 Quarts (Pack of 1)

ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint; for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition
COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat; apply a second coat only if a higher build is needed; to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer
EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip; wear proper personal protection; work in a well-ventilated area; boat primer is chromate-free and lead-free
DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F; marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint
AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100; spray application - thin with xylene; do not apply Topside Primer thicker than recommended or it may not cure properly

Rank No. #6

TotalBoat 5:1 Epoxy Resin Kit (Gallon, Slow Hardener), Marine Grade Epoxy for Fiberglass and Wood Boat Building and Repair

Premium Epoxy Kits Include Enough 5:1 Marine Epoxy Resin And Hardener To Complete A Variety Of Boat Building, Composite Construction, And Epoxy Repair Projects. For Use On Wood, Fiberglass, Reinforcement Fabrics, Etched Aluminum, Bare Steel, And Lead. Not Suitable For Clear-Coating Applications
Ideal Viscosity For Wetting Out Fiberglass Cloth And Other Reinforcement Fabrics. Self-Leveling Properties Are Ideal For Coating And Laminating. Combine With Fillers To Make A High-Strength Fairing Compound, Filleting Material, Or Adhesive
Choose Fast Or Slow Hardener: Pot Life Ranges From 12 Minutes @ 75°F For Fast Hardener, To 20 Minutes @ 75°F For Slow Hardener
Choose From Three Epoxy Kit Sizes: Quart, Gallon, And 4.5 Gallon, With Your Choice Of Totalboat 5:1 Fast Or Slow Hardener. Kits Include Resin, Hardener, Calibrated Pumps, Mixing Sticks And Mixing Cups. Compatible With Other 5:1 Epoxy Resin Systems

Rank No. #7

TotalBoat-14409 Marine Gelcoat for Boat Building, Repair and Composite Coatings (White, Quart with Wax)

Premium Marine-Grade Polyester Gelcoat: More Durable Than Standard Orthophthalic Gelcoat, This Is The Smart Choice For Cosmetic Gelcoat Repair, Hull Coatings, Boat Building, Layups And Exterior Coatings For Composite Parts On Boats, Motorcycles, Rvs & More
Ideal For Cosmetic Repairs, Easy To Tint With A Polyester Resin Or Gelcoat Coloring Agent To Color Match Your Existing Gelcoat; Tint White Gelcoat To Get Pastel Colors; Tint Neutral Gelcoat For Dark, Bold Colors. Add Colorants Before Adding Mekp Catalyst
Easy One-Step Application Using A Brush, Roller Or Spray Gun: Non-Sagging, High-Viscosity Formula Is Easy To Apply And Has Great Coverage. At 77°F, Pot Life Is 8-12 Minutes. Cured Gelcoat Is Easy To Sand, Buff And Polish To A High-Gloss, Showroom Finish
Choose The Right Gelcoat For Your Project: For Polyester Resin Layups, Use Gelcoat Without Wax As The First Coat Inside A Prepared Layup; As A Final Coat, Use Gelcoat With Wax (The Wax Makes The Gelcoat Dry Tack-Free); If Needed, Thin With Styrene Only

Rank No. #8

TotalBoat-439900 TotalProtect Epoxy Barrier Coat System (Gray), 1 Gallon (Pack of 1)

High-build two part epoxy primer and barrier coat for use above and below the waterline
Excellent for gelcoat blister prevention and repair work on fiberglass boats
Provides superior protection on all underwater metals
Easy to mix and apply by roller or spray. No sanding required. Fast drying primer creates a flexible, durable epoxy barrier coat.
Available in White or Gray in Quart or Gallon sizes. Coverage: 225 sq. ft. per gallon (at 7 mils wet). Thinner: TotalBoat Epoxy Primer Thinner 200.

Rank No. #9

TotalBoat Dewaxer & Surface Prep (Quart)

Perfect for cleaning and dewaxing fiberglass, gelcoat, steel, bronze, aluminum & wood surfaces
Completely removes surface contaminates such as release agents, wax, oil, grease, dirt, and dust
This multipurpose solvent is ideal for cleaning painting tools and equipment
Available in Quart and Gallon sizes

Rank No. #10

TotalBoat Flexible Resin Spreaders Set - Reusable Scrapers for Epoxy, Fillers, Putty, Caulk, Spackling Paste, Polyester Resin and Adhesives

MULTI-USE PLASTIC SPREADERS for smooth, precise application of putties, fillers, resins and other liquid and thickened materials used in a variety of boat repair, composite, automotive, home repair, art and woodworking applications
FIRM, FLEXIBLE & DURABLE: Long-lasting scrapers are sturdy, with flexible edges that bend without breaking or cracking
EASY TO CLEAN & REUSABLE: When you're done using the spreader, just bend it and any dried material will peel off easily so you can reuse many times
VERSATILE SET INCLUDES 3 SPREADERS: V-NOTCHED EDGE spreads thickened adhesives and fillers at a consistent depth over large areas; STRAIGHT EDGE for even spreading, smoothing filler flush to the surface, saturating fiberglass with resin, and removing air bubbles from GRP layups; CURVED EDGE for making smooth fillets and fairing curves

Last update on 2023-06-09 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best Totalboat Epoxy Fairing Compound?

Do you get stressed out thinking about shopping for a great Totalboat Epoxy Fairing Compound? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Totalboat Epoxy Fairing Compound, which is why we have assembled a comprehensive list of the greatest Totalboat Epoxy Fairing Compound available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Totalboat Epoxy Fairing Compound that you consider buying. Your questions might include the following:

Is it worth buying an Totalboat Epoxy Fairing Compound?
What benefits are there with buying an Totalboat Epoxy Fairing Compound?
What factors deserve consideration when shopping for an effective Totalboat Epoxy Fairing Compound?
Why is it crucial to invest in any Totalboat Epoxy Fairing Compound, much less the best one?
Which Totalboat Epoxy Fairing Compound are good in the current market?
Where can you find information like this about Totalboat Epoxy Fairing Compound?

We’re convinced that you likely have far more questions than just these regarding Totalboat Epoxy Fairing Compound, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Totalboat Epoxy Fairing Compound, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Totalboat Epoxy Fairing Compound. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Totalboat Epoxy Fairing Compound buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Totalboat Epoxy Fairing Compound currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Totalboat Epoxy Fairing Compound has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Totalboat Epoxy Fairing Compound?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Totalboat Epoxy Fairing Compound.
Customer Ratings: Number ratings grade Totalboat Epoxy Fairing Compound objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Totalboat Epoxy Fairing Compound.
Product Quality: You don’t always get what you pay for with an Totalboat Epoxy Fairing Compound, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Totalboat Epoxy Fairing Compound is should be an indication of how long it will work out for you.

We always remember that maintaining Totalboat Epoxy Fairing Compound information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Totalboat Epoxy Fairing Compound is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

The Best Totalboat Epoxy Fairing Compound of 2022 – Reviews & Buying Guide

How Do You Buy The Best Totalboat Epoxy Fairing Compound?

Related Post: