The Best Usb To Uart Cable of 2022 – Reviews & Buying Guide
After hours researching and comparing all models on the market, we find out the Best Usb To Uart Cable of 2022. Check our ranking below.
2,347 (random num) Reviews Scanned
- FTDI FT232RL Chip:Built-in original FTDI FT232RL Chip,High quality and high reliability.Ideal for programmers, hardware engineers and DIY User.
- 1.8M/5.9 Feet: The length of the line is 1.8 meters(5.9 feet).ideal USB 2.0 debug tools for Vendor ID re-write, router, GPS, set top box, transmitter, flash firmware,Debugging,Programing , etc.
- PIN:this cable provides access to UART (transmit) Tx, (receive) Rx, VCC (5V) and GND,CTS,RTS.TTL Level is 3.3V
- Compatibility: This USB-to-TTL Serial cable is compatible with Windows 7, 8, 10 and various Linux OS and Mac OS
- Customer Support:Offering permanent technical support and a 1-year product replacement service for this USB to UART cable. All questions will be answered for you within 1 business day
- 6 ft USB to TTL serial adapter (with 4 pin 0.1” pitch female header socket) connects devices with 3.3 V logic level UART signals interface to a laptop via USB port
- A genuine PL2303TA chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates
- 6 feet USB to TTL serial cable 3V3 (4 way output flying leads ) provides access to UART (transmit) Tx, (receive) Rx, VCC (5V) and GND
- PL2303 Prolific chipset on the PCB board has configurable internal EEPROM and UART signals can be individually inverted by configuring the EEPROM
- 4 pin 3.3V USB to TTL converter cord Compatible with Windows 10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE; ideal USB 2.0 debug cord for Vendor ID re-write, router, GPS, set top box, transmitter, flash firmware on hard drive, etc.
- 6 ft FT232 chip USB to TTL serial adapter (with 6 pin 0.1” pitch female socket header) connects devices with 5V logic level UART signals interface to a laptop via USB port
- A genuine FT232RL chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates
- 6 feet FTDI chip USB to TTL serial cable (6 way outputs, Single-In-Line ) provides access to Tx, Rx, RTS#, CTS#, VCC (5v) and GND
- FTDI chipset on the PCB board has configurable internal EEPROM and UART signals can be individually inverted by configuring the EEPROM
- 6 pin header 5V TTL to USB converter cord is compatible with Windows 11,10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE, Mac OS, Linux 2.4 and greater; ideal USB 2.0 debug cord for Vendor ID re-write, router, GPS, set top box, transmitter, flash firmware on hard drive, etc.
- Support 4 kinds of TTL levels:This is a versatile USB to TTL converter. It is powerful enough to handle almost all TTL level communications. It is compatible with 5V, 3.3V, 2.5V, 1.8V TTL levels.
- FTDI FT232RNL Chip:Built-in original FTDI FT232RNL Chip.Industrial grade, Compatible with Windows 7, 8, 10, 11, Linux, MacOS
- Protective case:Comes with a protective case, this transparent protective case can effectively prevent static interference from the hand and prevent accidental short circuit
- It provides access not only to UART TX,RX, RTS, CTS, VCC and GND pins,but also provides access to DSR,R1,DCD,DTR,RESET pins
- What You Get: SH-U09C5 USB to UART Adatper, 6PIN Cable
- 3 ft short USB to TTL serial adapter with 3 pin 0.1” pitch female socket header connects devices with 3.3 V logic level UART signals interface to a laptop via USB 2.0 port (232r-3v3)
- 3.3v TTL to USB cable is built with a genuine FT232R chip module in USB 2.0 type A male terminal for wider compatibility and reliable data transfer rates
- 3 feet USB to UART TTL serial cable 3.3 volt features 3 way output 2.54mm flying lead jumper wires to provide access to Tx transmit, Rx receive and GND (TTL-232R-3V3)
- USB to TTL 3.3v built with FT232 FTDI chip on the PCB board has configurable internal EEPROM and 3V3 UART signals can be individually inverted by configuring the EEPROM
- USB-TTL converter chord is compatible with Windows 11, 10, 8, 8.1, 7, 2008/XP/Vista/CE, Mac OS, Linux; ideal USB 2.0 debug data communication cord for Vendor ID re-write, mini computer, router, printer, GPS, set top box, transmitter, flash firmware on hard drive, video display terminal, etc.
- 3 ft short USB to TTL serial adapter with 6 pin 0.1” pitch female socket header connects devices with 3.3 V logic level UART signals interface to a laptop via USB 2.0 port (232r-3v3)
- 3.3v TTL to USB cable is built with a genuine FT232R chip module in USB 2.0 type A male terminal for wider compatibility and reliable data transfer rates (TTL-232R-3V3)
- 3 feet USB to UART TTL serial cable 3.3 volt features 6 way outputs to provide access to Tx, Rx, RTS#, CTS#, VCC 5v and GND (power line provides 5V and data signal is at 3.3V)
- USB to TTL 3.3v built with FT232 FTDI chip on the PCB board has configurable internal EEPROM and 3V3 UART signals can be individually inverted by configuring the EEPROM
- USB-TTL converter chord is compatible with Windows 11, 10, 8, 8.1, 7, 2008/XP/Vista/CE, Mac OS, Linux; ideal USB 2.0 debug data communication cord for Vendor ID re-write, mini computer, router, printer, GPS, set top box, transmitter, flash firmware on hard drive, video display terminal, etc.
- ★This usb to ttl serial cable with built-in PL2303TA chip is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port.
- ★Four Wire: Red - 5v; Black - Ground; Green -Tx; White - Rx.
- ★The cable is specifically for laboratories,product testing,low-cost MCU communication and other applications.
- ★Fast transmission,low power consumption and sustainable use.
- ★Package Content: 1 x USB Cable.
- COMPATIBILITY: Nitomtyu 6 feet USB to TTL serial converter cable with 3.3V logic level , perfect for programming and debugging microcontrollers and development boards.
- VOLTAGE SPECIFICATION: Operates at 3.3V logic level (signal 3.3V, VCC 5.0v), making it ideal for modern low-voltage serial devices and microcontrollers
- PINOUTS: GND (Black/1), CTS (Brown/2), VCC(Red/3), TXD (Orange/4), RXD (Yellow/5),RTS (Green/6). Marks: CABLE'S 6 PINOUTS ARE NAMED ON PRODUCT to avoid error connect.
- CABLE LENGTH: 6-foot (72-inch) cable provides flexible working distance between USB host and target device
- PLUG-AND-PLAY: USB interface allows for quick connection to computers, while the TTL end connects directly to serial devices with no additional adapters needed.
- USB to serial adapter uses original FT232RL chips to provide better stability and compatibility, and easily realize industrial-grade high-performance communication between computers and TTL equipment
- PWR TXD RXD3 data indicator red lights, clearly display the working status, convenient for your programming and debugging
- Communication rate: 300bps~3Mbps, the module is powered by USB 5V, and the output of 3.3V or 5V can be achieved by adjusting the switch. The product is small and exquisite and easy to carry.
- The interface is a USB-A type interface, which can be directly connected to computer equipment and has interface protection, such as self-recovery fuse, ESD electrostatic protection and IO protection diode circuit, to avoid damage to products and equipment.
- USB to TTL Serial Adapter Compatible With Multi Systems For Win7/8/8.1/10/11, Mac, Linux, Android, WinCE, etc.
- Stable Chip: At the heart of the CP2102 is the CP210x chip, a highly integrated USB-to-UART bridge featuring low power consumption and high performance. It supports the Full Speed USB 1.1 specification, provides data transfer rates up to 12Mbps, and is compatible with USB 2.0.
- Favorable Compatibility: This device was easy to use on MacOS, Windows 10/11, and Linux machines.
- Versatile And Easy To Use: Supports 3.3V, RST, TXD, RXD, GND & 5V. Sits snug in the USB port, no risk that data connection is being interrupted during data transfer.
- Equipped With Indicator Light: the status indicator light will be always on after correctly installing the driver, and the transceiver indicator light will flash when communicating, and the higher the baud rate, the lower the brightness.
- Baud Rate: Support from 300 bps to 1.5 Mbps.
Last update on 2025-05-19 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best Usb To Uart Cable?
Do you get stressed out thinking about shopping for a great Usb To Uart Cable? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Usb To Uart Cable, which is why we have assembled a comprehensive list of the greatest Usb To Uart Cable available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Usb To Uart Cable that you consider buying. Your questions might include the following:
- Is it worth buying an Usb To Uart Cable?
- What benefits are there with buying an Usb To Uart Cable?
- What factors deserve consideration when shopping for an effective Usb To Uart Cable?
- Why is it crucial to invest in any Usb To Uart Cable, much less the best one?
- Which Usb To Uart Cable are good in the current market?
- Where can you find information like this about Usb To Uart Cable?
We’re convinced that you likely have far more questions than just these regarding Usb To Uart Cable, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Usb To Uart Cable, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Usb To Uart Cable. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Usb To Uart Cable buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Usb To Uart Cable currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Usb To Uart Cable has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Usb To Uart Cable?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Usb To Uart Cable.
- Customer Ratings: Number ratings grade Usb To Uart Cable objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Usb To Uart Cable.
- Product Quality: You don’t always get what you pay for with an Usb To Uart Cable, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Usb To Uart Cable is should be an indication of how long it will work out for you.
We always remember that maintaining Usb To Uart Cable information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Usb To Uart Cable is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.