The Best Trane Xr90 Ignitor of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Trane Xr90 Ignitor of 2023. Check our ranking below.

2,880 Reviews Scanned

Rank No. #1

Flame Sensor for Trane Furnace - Flame Sensor Igniter Sensing Rod for Trane XR80 XR90 XB80 XE80 and American Standard Gas Furnace, Heat Sensor Replace SEN01114 SEN00491 SEN0337 B340888P01-2PCS

The most common reasons for replacing the flame sensor are when the furnace doesn’t heat or runs only for a few minutes.
Flame sensor is for Trane and American Standard furnace. Fits models: Trane: tuh2b080a9v3vaa, xr80 tud1d120a9601aa, tue060a936ko, xe90 tuc060c936b4, xb80 tue080a936l3, tud1b060a9361ab, xr90 model tux1b080a9421ab, etc.
American Standard: auc1c100a9481ad, cub100a948c4, uc1b080a9421ae, add080c936c3, aux1b060a9361ab, auh2b060a9v3vab, etc. May fit others please confirm your original part number and compare to our product description before you order.
Dimension - 3.4" in length and 90 degree "crook" on end approximate 2".
Package including 2 X flame sensor replace OEM part number #SEN01114, SEN00441, SEN441, SEN00337, SEN00491, SEN0337, SEN0491, SEN1114, B340888P01.

Rank No. #2

Trane Hot Surface Ignitor, White

The Trane Burner Igniter is a genuine OEM (Original Equipment Manufacturer) part designed and engineered to exact specifications
Trane Burner Igniter ignites the gas to light the furnace burner
Trane IGN00145 includes Igniter, Bracket and (3) Screws
The high quality Trane Burner Igniter is also called the Hot Surface Ignitor Kit
Repair your appliance with confidence when you choose Trane Burner Igniter

Rank No. #3

Furnace Ignitor Igniter Directly Replaces Trane X24080149010

Furnace Ignitor Igniter
Top Quality ClimaTek Replacement Part!
Directly Replaces Trane X24080149010

Rank No. #4

OEM Trane Furnace Ignitor Igniter IGN00145

This is a Brand New OEM Furnace Ignitor Igniter
Top Quality OEM Replacement Part!

Rank No. #5

Trane Siliconnitrideignitorw/Bracket80V

This is a genuine OEM (Original Equipment Manufacturer) part.
Use genuine OEM parts for safety reliability and performance

Rank No. #6

Emerson 768A 815 Hot Surface Ignitor, 80V, Silicon Nitride

Silicon nitride 80V hot surface ignitor
2 Terminal amp receptacle with 083-inch female sockets
Must be used with hot surface ignition for residential furnaces
Country of Origin: Mexico

Rank No. #7

Duralight Furnace Hot Surface Ignitor Direct Replacement For Trane American Standard IGN00034 and IGN00054

Duralight Two Year Warranty
Made In USA
Direct Replacement Part For Many Trane and American Standard Furnaces
Includes Two High Temp Ceramic Wire Nuts
Replaces Part Numbers B340039P01, IGN34, IGN00034, IGN54, and IGN00054

Rank No. #8

Trane IGN00054 Igniter

This is an O.E.M. authorized part
Fits various Trane models
OEM Part Number IGN00054
This is a Trane replacement part
Part Number IGN00054

Rank No. #9

Trane Replacement Part

This is a genuine OEM (Original Equipment Manufacturer) part.

SaleRank No. #10

OEM Trane IGN00145 American Standard Hot Surface Ignitor

OEM Component
OEM Silicon-Nitride Hot Surface Igniter / Ignitor
80V , Includes Bracket and Screws
Commonly used in 100's of different Furnaces
Replaces / Supersedes: IGN104 IGN-104 IGN0104 IGN-0104 IGN00104 IGN117 IGN00117 IGN00145 IGN145 IGN0145 IGN-0145 IGN00117 IGN-0117 IGN0117 A341947P01 A341948P02 and others

Rank No. #11

SEN01114 Furnace Flame Sensor by Beaquicy - Replacement for American Standard Furnace Trane

✦【PRODUCT SPECIFICATIONS】--- The SEN01114 Furnace Flame Sensor is designed to detect the flame safely. The product is L-shaped. If the sensor does not detect the flame,the gas valve will be closed to prevent the original gas from pouring into your home.When your flame sensor goes bad, the furnace will light for a few seconds, then turn off the safety device of the flame sensor.The dimension is about 3.4"* 2.1", the weight is 0.48 ounces. The package includes 1 x SEN01114 Furnace Flame Sensor.
✦【SUPERIOR PERFORMANCE】--- The SEN01114 flame sensor monitors the burner to detect whether or not a flame is present by sending a DC current through the sensor via the flame itself, received by the computer. If your flame sensor goes bad, the main gas burners stay on for only 8 to 10 seconds, then turn off the safety device of the flame sensor,at this time, you need to replace replace the old SEN01114 Furnace Flame Sensor in time.
✦【WIDE COMPATIBLE】--- SEN01114 Flame Sensor replaces part numbers: SEN00491, SEN1114, SEN01114, PSE-T19, B340888-2SEN337, SEN441, SEN0441, SEN491, ADC1B040A9241AA, ADC1B040A9241AB, ADC1B040A9241AC, ADC1B040A9241AD, ADC1B060A9361AA, ADC1B060A9361AB, ADC1B060A9361AC, ADC1B060A9361AD, ADC1B080A9421AA, ADC1B080A9421AB, ADC1B080A9421AC, ADC1B080A9421AD, ADC1B080A9421AE, ADC1C100A9481AA, ADC1C100A9481AB, ADC1C100A9481AC, ADC1C100A9481AD, ADC1D120A9601AA, ADC1D120A9601AB, ADC1D120A9601AC, etc.
✦【365 DAYS WARRANTY】--- The SEN01114 furnace flame sensor replacement supports 365 DAYS return and exchange. If you have any quality problem during warranty period, please contact customer service in time. We will try our best to solve the problem. Our company attaches great importance to the shopping experience of each customer. We are committed to allowing our customers to use the highest quality products at the best prices. Customer satisfaction is our tireless pursuit.
✦【MADE OF HIGH QUALITY MATERIAL】--- The Part Number SEN01114 Furnace Flame Sensor is made of premium quality material, non OEM but quality equal to OEM requirements. Prevents cracking and breaking in the process of working or assembling. The color is white and silver. The furnace flame sensor is designed to detect the flame safely. High quality, reasonable price, fast Amazon official logistics. Installed easy faster, saving you time and energy.

Rank No. #12

IGN00145 Furnace Ignitors with male plug 80 Volt Silicon Nitride Replacement Furnace Igniters Upgraded Compatible with Trane IGN145, Hot Surface Ignitors with Mounting screws kit

The IGN00145 Upgraded Silicon Nitride Replacement Furnace Ignitors Igniters Engineered for reliable performance that ensures your furnace burner running well and solve some problem, such as 9 flashes error on my furnace control board; your furnace was acting up, not staying lit, flame sensor goes out etc.
The 80 Volt Silicon Nitride Replacement Furnace Igniters Part Number：IGN00145 IGN145 SSN0145 D343692 IGN00117 IGN-0117 IGN0117 IGN104. The Hot Surface Ignitors Kit help get your heater operational, reach the comfortable temperature.
Compatible with Trane manufactured furnaces Design: The Furnace 80 Volt Nitride Igniter for American Standard IGN00145 IGN145 is engineered for reliable performance that ensures the Nitride Ignitor Higher quality and longer lifespan, exceed OEM specifications.
Easy Installation: The Hot Surface Ignitors with Mounting screws kit as a Assist part is easy for installation, Fits perfectly, No Special adjustments. Please be sure that it is recommended to use saftey equipment and to disconnect the appliance from utilities prior to any service or repair.
1 year Warranty: The IGN00145 Furnace Ignitors, 80 Volt Silicon Nitride Replacement Furnace Igniters Upgraded includes Bracket and 3 Screws, No Special Tools Required, If you have any problem about the Hot Surface Ignitors with Mounting screws kit, please contact us, It can be replaced/enjoy hassle-free return within 12 month, And you can rest assured of your purchase.

SaleRank No. #13

SEN01114 -American Standard & Trane OEM Replacement Flame Sensor

OEM Sensor , Not a GENERIC Component or Universal Substitute
This is a Brand New Genuine OEM Furnace Flame Sensor with Warranty*
NIKROTHAL 80 Material
Note: Images are for illustration only. Actual part could vary.
Commonly Used in 1000's ofAmerican Standard & Trane Units

Rank No. #14

Generec Replacement for Trane SEN01114 Flame Sensor by Generec

Rank No. #15

Trane KIT18110 OEM Upgraded Furnace Control Board Kit - KIT18110, Includes Ignitor

OEM Furnace Control Board Kit Includes: Control Board , Ignitor , Wire Harness , Bracket & Instructions
American Standard / Trane OEM / Service First Component
NOTE - For downflow units built in 1999 and earlier, use KIT18109, for all other units, use KIT18110.
Replaces / Supersedes: BAF00359 BAF0359 BAF-0359 CNT05995 CNT5995 CNT-5885 KIT18110 KIT-18110 CNT05165 CNT5165 CNT-5165 CNT3076 CNT-3076 CNT03076 CNT03798 CNT-3798 CNT3798 CNT5164 CNT05164 CNT-5164 CNT2854 CNT02854 CNT-2854 CNT03604 CNT-3604 CNT3604 CNT07541 CNT7541 CNT-7541 50A65-475 50A65-475-07 , D341396P05 D341396P03 D341213P01 D341396P01 D341396P01 50A65-120 50A65-143 50A65-288 and many others.
Commonly Found in the Following A/TDX AND A/TUX GAS FURNACE Models: AUH1B040A9241AA , AUH1B040A9241AB , AUH1B060A9361AA , AUH1B060A9361AB , AUH1B080A9421AA , AUH1B080A9421BA , AUH1B080A9421BB , AUH1C080A9601AA , AUH1C100A9481AA , AUH1D100A9601AA , AUH1D120A9601AA , TUH1B040A9241AA , TUH1B040A9241AB , TUH1B060A9361AA , TUH1B060A9361AB , TUH1B080A9421AA , TUH1B080A9421BA , TUH1B080A9421BB , TUH1C080A9601AA , TUH1C100A9481AA , TUH1D100A9601AA , TUH1D120A9601AA

Rank No. #16

62-22868-93 Furnace Ignitor Hot Surface Ignitor Compatible with Rheem Ruud Weatherking Furnace Replace 62-22441-01, 62-22548-01, 62-22868-01, 62-22868-02, 62-22868-82, 62-22868-92, 62-22868-93S

❤【PERFECT FIT】- 62-22868-93 hot surface ignitor is perfectly compatible with Rheem, Ruud, and Weatherking furnaces (NOTE: Not Fit for -gec or -ged "drum" Heat Exchanger Type Furnaces)
❤【REPLACEMENT MODEL】- 62-22868-93 furnace ignitor replaces part number 62-22441-01, 62-22548-01, 62-22868-01, 62-22868-02, 62-22868-82, 62-22868-92, 62-22868-93S, 62-22869-01, 62-23460-01, 8553-5514 (Contact us if you are not clear the compatibility, and we are here to help within 24 hours)
❤【EXCELLENT PERFORMANCE】- The 62-22868-93 furnace hot surface ignitor with wire connectors is used to light the oven burner and adjust the temperature normally. It fixes the symptom that the oven failing to heat or not heat properly. Use this high-quality replacement part to extend the life of the oven
❤【PREMIUM QUALITY & EASY INSTALLATION】- Our 62-22868-93 furnace ignitor for rheem is made of durable and high-quality materials well-tested by the manufacturer, with higher heat resistence, durability and the best quality for greater power connection, higher load and longer service life. ⚠️It is fairly easy to install. If wire connector does not match up you will need to cut off the connector and splice the wires with porcelain wire nuts
❤【SHOP WITH CONFIDENCE】- Funmit adhere to provide all customers with a simple, streamlined shopping experience of large appliance replacement parts, and prove that we have the highest quality parts and service out there. We stand by our products, and our customers are our focus as a business. If you have any quality problem, please contact Funmit customer service team in time, and we will try our best to solve your problems

Rank No. #17

Duralight USA Nitride Furnace - Heater Ignitor Direct Replacement For Trane American Standard IGN00152 and IGN00146

Durable Silicon Nitride Construction
Made in USA
OneTrip Parts Two Year Warranty
Correct Mounting Bracket and Direct Replacement Plug
Direct Replacement for Trane American Standard IGN00152 and IGN00146

Rank No. #18

Furnace Hot Surface Ignitor 768A-845 Direct Replacement For Trane B340970PO1 IGN00104

Direct Replacement Part For Many Trane and American Standard Furnaces
Correct Plug for Trane Applications
Replaces Part Numbers: IGN00104 X13130524010 768A-845

Rank No. #19

KIT03033 SKIT03033 Furnace Ignitor Igniter Replaces Trane

Used In: Trane package models beginning with YCD15, YCD17 and YCD18

Rank No. #20

Emerson 768A 843 Hot Surface Ignitor, 80V, Silicon Nitride

Silicon Nitride 80V hot surface ignitor
2 terminalA receptacle with .084" female sockets
Must be used with hot surface ignition for residential furnaces
Package dimensions: 5.9" L x 2.1" W x 1.6" H

Last update on 2023-08-10 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Trane Xr90 Ignitor?

Do you get stressed out thinking about shopping for a great Trane Xr90 Ignitor? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Trane Xr90 Ignitor, which is why we have assembled a comprehensive list of the greatest Trane Xr90 Ignitor available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Trane Xr90 Ignitor that you consider buying. Your questions might include the following:

Is it worth buying an Trane Xr90 Ignitor?
What benefits are there with buying an Trane Xr90 Ignitor?
What factors deserve consideration when shopping for an effective Trane Xr90 Ignitor?
Why is it crucial to invest in any Trane Xr90 Ignitor, much less the best one?
Which Trane Xr90 Ignitor are good in the current market?
Where can you find information like this about Trane Xr90 Ignitor?

We’re convinced that you likely have far more questions than just these regarding Trane Xr90 Ignitor, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Trane Xr90 Ignitor, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Trane Xr90 Ignitor. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Trane Xr90 Ignitor buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Trane Xr90 Ignitor currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Trane Xr90 Ignitor has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Trane Xr90 Ignitor?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Trane Xr90 Ignitor.
Customer Ratings: Number ratings grade Trane Xr90 Ignitor objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Trane Xr90 Ignitor.
Product Quality: You don’t always get what you pay for with an Trane Xr90 Ignitor, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Trane Xr90 Ignitor is should be an indication of how long it will work out for you.

We always remember that maintaining Trane Xr90 Ignitor information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Trane Xr90 Ignitor is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

The Best Trane Xr90 Ignitor of 2023 – Reviewed and Top Rated

How Do You Buy The Best Trane Xr90 Ignitor?

Related Post: