Skip to content

The Best 12 volt timer relay of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best 12 volt timer relay of 2023. Check our ranking below.

2,493 Reviews Scanned

SaleRank No. #1
DROK 12 Volt Timer Relay, 0.1s to 999min 50mA 4-Mode On-Off Automotive Digital Delay Relay, Electric Delay Timer Switch, Cycle Time Delay Module with LED Display
  • 4 MODE TIME DELAY RELAY: DROK 12V relay is provided with 4 different settings and supports various triggering signal source, like positive side of power supply triggering, Button, PNP sensor, PLC signal, which is available for most of applications.
Rank No. #2
DC12V H3Y-2 Delay Timer Time Relay 0-60S Second & Base Socket DPDT 8-Pin (DC 12V)
  • Supply voltage : DC 12V; Contact Capacity : 240VAC 5A;Rated time Range : 0~60 s
  • Perfect work for the industrial automation system and mechanical equipment to delay component.
  • Work mode : electricity delay; Pins : 8
  • Total Size (Approx.): 2.1 x 1.1 x 0.7 inches (L*W*H)
  • Package : 1 x Time Relay + 1 x Socket
Rank No. #3
Automotive Digital Timer Relay Board DC 12V 20A 1500W Relay Module with Dual Time Display, Timing Relay Switch ON-Off Control Support Cycle of time Time Delay for Car Vehicle (DC 12V)
  • ❃❃ Digital cycle timer delay module with time ranging from 1 second to 999 hours, available for various application.▲▲ (Notice: no out put Voltage) If you need the E-Manual or meet any other questions, pls contact us and we will send it to you!!!
  • ❃❃ The time relay delay Dual display: Red readout for practical value(PV); Blue readout for set value(SV);79mm*43mm-display panel; 71mm*40mm*24mm-cut out size.
  • ❃❃ Can be used in timing, delaying, cycle timing, intermittent timing, raft fishing machine, slow-down machine DIY, etc.
  • ❃❃ This relay switch is four-terminal wiring and setting by buttons, easy and simple for everyone to use it.
  • ❃❃ This 12V time delay relay can store the setting automatically. Please wait 6 seconds after finishing setting the data. The data set will be stored automatically after 6 seconds.
Rank No. #4
Baomain THC15A DC 12V Digital LCD Power Programmable Timer Switch Relay 16A Amp
  • Rated Voltage: 12V DC; Contact Capacity: 16A
  • Full Time Range: 1Min-168Hours;
  • Programmable: 17times/week or day
  • Operate Temperature: -10 to +40 C
  • Net weight: 150g
Rank No. #5
UCTRONICS DC 12V Programmable Multifunction Time Delay Relay Module with Segment LEDs Display for Smart Home, Automatic Control
  • Programmable 18 delay modes, to meet the switch control of all kinds of occasions
  • Reverse protection, avoid burning down the module as connecting the wrong terminals
  • Auto power saving function, user could set up on their own
  • All options setting could be saved automatically, the content will not be lost even power down
  • Paper instructions
Rank No. #6
Timer Relay, DROK Time Delay Relay DC 5V 12V 24V Delay Controller Board Delay-off Cycle Timer 0.01s-9999mins Trigger Delay Switching Relay Module with LCD Display Support Micro USB 5V Power Supply
  • Independent Parameters: OP/CL/LOP parameters can be modified and saved, and they are individual
  • Auto Save: All setting parameters are automatically saved by power-fail
  • LCD Display: the time delay relay module is designed with LCD display, can clearly and directly show the current mode and parameters
Rank No. #7
DC 12V Delay Timer Time Relay DPDT 0-60S Second and Base Socket H3Y-2 (DC 12V)
  • Type: H3Y-2; Contact Type: DPDT
  • Supply voltage: DC 12V; Contact: 5A 250VAC Resistive Load; Time Range: 0~60 Seconds
  • Number of Terminals: 8; Mount Rail Type: 35mm DIN Rail;
  • Total Size (Approx.): 68 x 22 x 88mm/ 2.7" x 0.9" x 3.5"(L*W*H) ; Indicator Operation: On-Up Two LED Indicator Light
  • Package Content: 1 x Time Relay,1 x Base Socket
Rank No. #8
ANMBEST 2PCS DC 12v Delay Relay Switch Turn On Off Switch Module with Time Timer Timing Adjustable Potentiometer LED Indicator Display
  • With 8 time ranges selected shortest 0.1s most up to 1 hour. Protection against power reversal protection diode, better protection module.
  • With optocoupler isolation, enhanced anti-jamming capability, industrial-grade circuit board, parameter permanent memory after power off.
  • With delay adjustment potentiometer clockwise adjustment time longer. The time adjustment range is 0.13s ~ 3700s.
  • Can be accessed by a large current load (250V ac 10A or 30V dc 10A).
  • APPLICATIONS: widely used in home intelligent system, anti-theft alarm system, door control system, automation equipment control, PLC industrial control, electronic development, etc.
SaleRank No. #9
12V Timer Switch - Programmable, DC/AC/Solar Battery Powered | 12 Volt Timer Relay
  • 【Customizable and Versatile】- With the ability to set up to 16 independent ON/OFF schedules, JVR timer switch is highly customizable. It offers a wide timing range from 1 minute to 7 days, catering to diverse scheduling needs.
  • 【Easy-to-Program and User-Friendly】- Programming JVR timer switch is a breeze with its easy-to-follow instructions and user-friendly LCD screen. It ensures a seamless setup experience, allowing you to effortlessly configure your desired settings.
  • 【Energy Efficient and Powered by 12V DC】- Designed for energy efficiency, JVR timer switch automatically controls power supply, conserving energy effectively. It operates on a 12V DC voltage, ensuring reliable and efficient performance.
  • 【Auto Lock Feature for Enhanced Security】- JVR timer switch includes an auto-lock feature that automatically locks the settings after 30 seconds of inactivity. This feature prevents unauthorized access and accidental changes to your programmed schedules.
  • 【Wide Range of Applications】- This versatile timer switch finds applications in various DIY projects such as automatic chicken coop doors, fish feeders, preheating systems, neon lights, kitchen appliances, televisions, and more. Its flexibility makes it suitable for a wide range of automation needs.
Rank No. #10
GAEYAELE 16A Multifunction Time Relay with 10 Function Choices AC/DC12V-240V Relay(GRT8-M1,AC/DC12V-240V)
  • Special 10 Functions: 5 time functions are controlled by the power supply voltage, 4 time functions are controlled by the control input, and 1 latch relay function.
  • Instructions: Comfortable and well-arranged function and time-range setting by rotary switches.
  • Time range: The time scale is 0.1s-10 days, divided into 10 ranges.
  • Relay Status : Its working status is indicated by the LED indicator.
  • Product Size: Ultra-small size, only 18mm width, 35mm rail mounting.
Rank No. #11
Timer Delay Relay DC 5V 12V 24V On Off Timer Module Trigger Cycle Dual MOS Delay Control Board with Digital Tube Display and Protective Shell for Smart Home, Automatic Control
  • ★Wide working voltage:The trigger cycle timer delay controller module work voltage is DC 5V-36V. Meet the use of most equipment. Control Current is 30A(Max and need a heat sink! Normal temperature 15A 400W). Trigger signal source: High-level trigger (3.0V~24V)
  • Different parameters can be set: OP、CL、LOP these parameters can be set. OP-on time, CL-off time, LOP-number of cycles (1—999 times, "---" means infinite cycles). These parameters are independent of each other and saved separately. All set parameters are automatically saved after power-off
  • ★One key emergency stop function:The module with One key emergency stop function (STOP key), with reverse connection protection, reverse connection will not burn. And it supports sleep mode. After enabling, the display will automatically turn off if without any operation within 5 minutes. Press any button to wake up
  • ★Unlimited switching times:This time delay switch circuit can realize the circuit high frequency fast and frequent on and off, unlimited switching times. No noise will be generated during the on-off process, no electric sparks, and no electromagnetic interference. The service life is longer than that of common electromagnetic relays
  • ★Dual MOS output: This MOS tube pulse generator uses dual MOS parallel active output, lower internal resistance, higher current, and strong power. 15A, 400W at normal temperature. For more details, please read the user manual
Rank No. #12
Baomain CN101A DC 12V 16A Amps Digital LCD Power Programmable Timer Time Relay Switch Support 17-Times Daily Weekly Program
  • Rated Voltage(INPUT): 12V DC/AC; Contact Capacity: 16A
  • Full Time Range: 1Min-168Hours; Programmable: 17times/week or day
  • Internal battery: 1.2V/40mA (rechargeable batteries)
  • Power failure memory: 60days; Operate Temperature: -10 to +40 C
  • Dimensions: 60x60x32mm; Net weight: 62g
Rank No. #13
Delay Relay Module, DROK DC 6-30V Timer Relay 12V 24V 0.01s-9999min 50mA Digital Timer Cycle Delay Switch Module AC 220V Power On-Off Controller with LCD Display Switch Button Case
  • SPECIFICATION --- working voltage DC 6-30V; timing range 0.01s-9999mins continuously adjustable.
  • TRIGGER --- support high level support, low level trigger, button trigger control, switching value control, available for most applications.
  • INDEPENDENT PARAMETER --- able to set different OP, CL, LOP parameters which are independent and saved separately; support viewing currently set parameters without affecting system operation.
  • OTHER FEATURES --- clear LCD display; support UART data uploading and parameter setting; with pause button, support one-button pause; with automatically sleep mode; with input reverse connection protection; with power-off auto storage function.
  • NOTE --- no trigger cable or connector included, need to be purchased separately.
Rank No. #14
Time Delay Relay 10 Seconds 5 pin 12V 30A 5 pin SPDT
  • Here is the answer, a time delay relay. This relay fits most common single or dual beam HID wiring harnesses for an easy fix to prevent HID from starting before cranking the engine.
  • Relays are contact rated at 30A @ 14 VDC, and sealed for waterproof operation
  • 10 second delay before switching On
  • Avoid those pesky ignition errors, flickering/fluttering HID, and needless wear and tear on ballasts.
  • Not only suitable for HID, can be used in any 5 pin relay harness, like for the oil pump
Rank No. #15
HiLetgo NE555 DC 12V Delay Timer Switch Adjustable Module 0 to 10 Second
  • Main Chip:NE555; Operating voltage: 12V DC.
  • The delay time is adjustable (0-10 seconds), delay turn on.
  • The potentiometer to adjust the output frequency.
  • With input power indicator, with the relay is energized light.
  • Can be controlled AC 250V/10A /DC 0~30V/max. 10A equipment. (Maximum control equipment 2000W).
Rank No. #16
PEMENOL Delay Relay Module, DC 12V 24V Time Delay Relay Controller Board LCD Display Digital Timer Switch Trigger Cycle Timer Module Power On-Off Controller Support XH2.54-3P Connector
  • ★LCD Display Shows a Variety of Parameters: The current mode and parameters are clear at a glance, very clear, simple and practical. In the running interface, short press the SET button to display the current parameter settings of the system, which does not affect the normal operation of the system. In P4 ~ P7 mode, short press the DOWN key to switch the display content (running time/cycle number)
  • ★Support Button Trigger Control: The relay module delay power off and trigger delay cycle timing circuit switch Support button trigger control, high and low level trigger, switch control, suitable for most occasions
  • ★With Reverse Connection Protection: This trigger delay cycle timing circuit switch has a key pause function, with reverse connection protection, the reverse connection does not burn
  • ★Support UART Data Upload and Parameter Setting: You can set different OP, CL, LOP parameters, these parameters are independent of each other and saved separately. All set parameters are automatically saved after power-off. For more details, please read the user manual
  • ★Automatic Sleep Function: In the running interface (P0~P7 mode), long-press the pause button to start or close the automatic sleep function (L-P selects on to start the sleep function, about five minutes, without any operation, the LCD backlight automatically turns off, the system Normal operation, press any button to wake up; press the off button to turn off the sleep function)
Rank No. #17
Timer Relay, Icstation DC 12V Time Delay Switch 10A Timer Switch Module Programmable Digital Time Cycle ON-Off Control 0-999s/min/h LED Display Time Relay Switch Module for Light Water Pump Engine
  • ⏳Wide Time Range: Icstation digital cycle timer relay delay module with time ranging from 1 second to 999 hours.
  • ⏳Dual LED Display: On-board dual green-red LED display module and tactile push-button, which is easy to set the delay time and working modes(Red readout for practical value(PV); green readout for set value(SV).
  • ⏳Support multiple types of working mode including timing, cycle and cycle working modes meeting your most demands
  • ⏳Mounting Size: 71 X 40 X 24mm/2.79 X 1.57 X 0.94 inch (L*W), Compatible Load: AC 250V 10A / DC 30V 10A
  • ⏳User can view and download English User Manual on the Amazon Page at Technical Specification or under the IMAGES.
Rank No. #18
YWBL-WH JK11C-M-H2-12V Timer Module, Adjustable Timer Delay Turn Off Module Timing Relay Time Switch 1~10sec
  • The optocoupler completely isolates the input 1mA current, and the voltage above 2.0V can be driven. Keep the voltage for more than 20V for a long time.
  • There are 4 gear delay ranges are available, optocoupler isolation, high security.
  • Adjustable delay length is from 0.2 seconds to 100 seconds. Other time ranges can be set.
  • A short voltage pulse is input at the trigger terminal, the module starts immediately (relay pull-in), and the relay turns off after a while. The input is invalid again during the delay.
  • Widely used: Timer module widely used on timer operating equipment, robots, intelligent product development, automation equipment, PLC development, smart home anti-theft alarm delay, electronic development, etc.
Rank No. #19
2pcs Delay Relay Module DC 6-30V Timer Relay 12V 24V 0.01s-9999min 50mA XY-WJ01 LCD Display Digital Timer Cycle Delay Switch Module AC 220V Power On-Off Controller with Switch Button Case
  • 【Delay Relay Module】Working voltage: DC 6-30V; timing range 0.01s-9999mins continuously adjustable.
  • 【LCD Display】Clear LCD display; with automatically sleep mode, in the running interface (P0~P7 mode), long-press the pause button to start or close the automatic sleep function.
  • 【Support Button Trigger Delay Control】The relay module delay power off and trigger delay cycle timing circuit switch support button trigger control, high and low level trigger, switch control, suitable for most occasions.
  • 【Support UART Data Upload and Parameter Setting】Able to set different OP, CL, LOP parameters, these parameters are independent of each other and saved separately. All set parameters are automatically saved after power-off.
  • 【With Reverse Connection Protection】This trigger delay cycle timing circuit switch has a key pause function, with reverse connection protection, the reverse connection does not burn.(no trigger cable or connector included, need to be purchased separately.)
Rank No. #20
HELLA 996152131 12V Delay-On-Release, Time Delay Relay, Black
  • HELLA electric - electronic solutions provide crucial help in making driving safer, more efficient and more comfortable. HELLA also supports the trend of electric driving with an extensive product portfolio for all development stages of electrification
  • HELLA relays are meant to do their job reliably for a long time because perfection and durability is one of our strengths right down to the smallest detail. HELLA offers reliable products and one of the widest ranges in the industry
  • Automotive grade delay-on-release adjustable time delay relay. 12 volt, 4 pins for simple control and ON - OFF switching function
  • Adjustable between 0 seconds up to 15 minutes using two simple dip switches for programming and an adjustable control dial
  • Capable of 10 amp switching and carry for up to 30 minutes

Last update on 2023-08-07 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best 12 volt timer relay?

Do you get stressed out thinking about shopping for a great 12 volt timer relay? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 12 volt timer relay, which is why we have assembled a comprehensive list of the greatest 12 volt timer relay available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 12 volt timer relay that you consider buying. Your questions might include the following:

  • Is it worth buying an 12 volt timer relay?
  • What benefits are there with buying an 12 volt timer relay?
  • What factors deserve consideration when shopping for an effective 12 volt timer relay?
  • Why is it crucial to invest in any 12 volt timer relay, much less the best one?
  • Which 12 volt timer relay are good in the current market?
  • Where can you find information like this about 12 volt timer relay?

We’re convinced that you likely have far more questions than just these regarding 12 volt timer relay, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for 12 volt timer relay, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 12 volt timer relay. Make sure that you are only using trustworthy and credible websites and sources.

We provide an 12 volt timer relay buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 12 volt timer relay currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of 12 volt timer relay has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an 12 volt timer relay?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your 12 volt timer relay.
  5. Customer Ratings: Number ratings grade 12 volt timer relay objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 12 volt timer relay.
  7. Product Quality: You don’t always get what you pay for with an 12 volt timer relay, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an 12 volt timer relay is should be an indication of how long it will work out for you.

We always remember that maintaining 12 volt timer relay information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding 12 volt timer relay is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: