20 Best 1988 Jeep Comanche Tail Lights of 2023 – Romance University
After hours researching and comparing all models on the market, Romance University finds out the Best 1988 Jeep Comanche Tail Lights of 2023. Check our ranking below.
2,223 (random number) Reviews Scanned
- âď¸ High Quality: our products are made of high-quality PVC materials, with self adhesion and high viscosity, firm and non degumming. Waterproof, crack resistant, fadeless, durable in extreme weather conditions, these advantages make the sticker more durable.
- âď¸Size Details:Honeycomb shaped tail light sticker is 48cm/18.9in long and 30cm/11.8in wide, applicable to all models. You can customize the shape as needed to better accommodate the light.
- âď¸Personality: The simple and fashionable honeycomb decal design will decorate the car tail lamp in the simplest way to attract other eyes, which will make your car have a fashionable and personalized appearance. You can also give it to your family or friends, who will love it.
- âď¸Easy to Install:Clean the dust or residue at the target with water without tools, and then wait for drying, peel off the protective film on the back and paste it. You will finish it without leaving traces or damaging the paint.
- âď¸Easy to Remove:Please be assured that our sticker is easy to remove and will not leave glue in the car. Stickers can be properly heated with a hair dryer, and the adhesive will become soft and can be removed.
- (Set of 2 Bulbs) 54SMD 3014 & 3SMD 3030 high Brightness chips per bulb, Working Voltage:9v-30v
- Fits: 1157 BAY15D 1016 1034 1157 1157A 2057 2057A 2357 2357A 2357NA 2397 3496 7528 p21/5w etc. Easy installation, plug and play.
- Application: Brake Lights, Tail Lights, Daytime Running Lights etc. Load resistor or flash relay might be needed to prevent the hyper flash when replacement for Turn Signal Lights.
- Advantage: Exclusive design, 300% brighter than original halogen bulb, full Aluminum Housing with Projection lens for Maximum Light output and better heat distribution,built in Constant Current IC for Longer life span & Low Power Consumption.
- Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you.
- Each one is equiped with 39 Super bright LEDs: 12 Red LED as Stop Turn Tail Lights, 21 White LED as Reverse Lights, 6 White LED as License Plate illuminator.
- This square stop turn tail light is Universal for 12V vehicles like Truck, Trailer, Boat, bus, Lorry, Van, etc. Also you may need to DIY to suit for Jeep YJ JK Wrangler, Jeep CJ CJ-7 ( NOT factory Jeep light );
- Partsam Lights are impact resistant and less susceptible to shock damage; Each LED is directly wired and water-tight sealed.
- Size: 170mm x 145mm x 60mm (6.7'' x 5.7'' x 2.4''); Wire Length: 150mm (6'')
- Wire Connection Tips: Black Wire is the Ground; White Wire,Red 12 LED works with low brightness as Tail Light and bottom white 6 LED works as License Plate Light; Yellow Wire,White 21 LED on the upside Works as Reverse Light; Red Wire,Red 12 LED works with high brightness as Brake/Turn Light;Please note this one is NOT plug and play, we need make the wire connect,because this one never come with the plug, just come with the wires
- Non-polarity. Can be used for brake lights, tail lights, stop lights, parking light, daytime running light, etc. Some sensitive vehicles will meet canbus issue after installing, load resistors or flasher relay will be required to solve these issues, you can contact us through Amazon Buyer Message to get help and solutions
- Low power and high brightness. 5.5W per 1157 led red bulb. Only 1/4 energy consumption of original 1157 red bulb but 4 times brighter. Built in smart IC driver ensure constant current, no radio interference. Plus instant-on capability with zero warm-up time
- Unique imitated halogen shape design. Resembling halogen bulb shape design and sequencing 54 pieces 4014-SMD LED chips precisely around the light. Delivering 360° high luminous efficiency with full amber light, easier to be noticed and safer to drive
- Small size comparable to OEM bulbs. Non-polarity, applied to US standard and CK sockets. Fits: BAY15D 1016 1034 1157 1157R 1178R 1196 2057 2057R 2357 2357R 2397 3496 7528 94, etc. Amazon filter system may not be 100% accurate or up to date, if you are not sure which bulb model fit your vehicle, please check your vehicle owner manual to confirm or ask a question for help
- Electroplating process housing. Improves oxidation resistance and produces less heat. High-end styling, matching great in the assembly. Ideal replacement for your halogen 2357 red bulbs
- Each with 38 Super bright LEDs:16 Red LEDs for stop/turn/tail functions. 18 White LEDs for backup function. 4 White LEDs for license illuminator.
- Universal for 12V vehicles like Truck, Trailer, Boat, bus, Lorry, Van, caravan, etc
- D OT Compliant for street legal lighting. 12 volts; Low ampere draw.
- Resistant polycarbonate housing and acrylic lens are sealed to prevent damage from moisture and corrosion.
- 3-Stud Mounted design, 4 color wire connection.
- Pack of 2-pc 1157 LED bulbs, 12V, 3030-SMD high brightness chipset, 28-LEDs per bulb, brilliant red color, 360 degree full angle illumination,long lifespan up to 50,000 hours, size: 0.75 inch in width, and 1.5 inch in length
- Bulbs will strobe at braking mode, so that people could notice your car easily and keep safe distance to avoid any automotive cars, trucks, SUVs getting rear-end collision
- Could fit bulb size: BAY15D 1016 1034 1157 1606 1662 2057 2357 2397 3496 7528 1034 1035 198 7528L 94 1076 1157LL 2357LL 2057LL 198LL P21/5W 7537 and 1154 etc. could fit your vehicle brake light. as long as your bulb size as above reference bulb size
- Directly replacement, just plug and play, no other parts or modifications needed and no error message warning on dashboard for 99% vehicle, no mercury, UV, IR or other deleterious radiation
- Buy with confidence, if you have any product or installation issue, please feel free to contact us, we will try to help you out within 24 hours
- ăSuper BrightăThe bright lights on our LED tailgate light strip consist of 270 pieces of top-quality 2935 SMD diodes chips, ensuring clear visibility for rear drivers to see you better. This LED brake light bar is built strong and durable to last.
- ăFull FunctionsăRed brake light, running light, sequential amber turn signals, white reverse light, and double flashing light. Safely alert rear drivers with our light bar for truck. Upgrade to LED turn signal strip for better visibility and safety.
- ăWaterproofăWaterproof-rated silicone and rust-resistant aluminum body allow your light bar for truck to withstand harsh weather conditions. Have peace of mind when it comes to rain, wind, and even car washes with our brake light LED strip.
- ăEasy InstallăThe truck light strip allows you to quickly stick it onto your vehicle and connect the wires. Our turn signal light bar and LED tail light bar come with user-friendly instructions, making installation straightforward and efficient.
- ăFitmentăOnly fits truck bed greater than 60 inches in width. This rear light bar is perfect for most pickup trucks. Please measure your truck's tailgate width before purchase. This truck LED light strip ensure a great fit for your vehicle.
- â PREMIUM LED CHIPS - The super bright lights on our LED truck tailgate light bar consists of 216 pieces of top quality 2935 SMD diodes chips, ensuring clear visibility for rear drivers to see you better. Built strong and durable to last!
- đŞ 5 POWERFUL FUNCTIONS - Functions include: red brake light, running light, sequential amber left/right turn signals, white reverse light, and double flashing light. Safely alert rear drivers to see you both on and off the road.
- đ§ WATERPROOF - IP67 waterproof rated silicone and rust-resistant aluminum body allow your tailgate light strip to withstand harsh weather conditions. Have peace of mind when it comes to rain, wind, and even car washes.
- âď¸ EASY INSTALLATION - Simply peel off the 3M adhesive tape, stick onto your tailgate, and connect the plug/wire. Please note that some trucks may require modifications. For the best quality application, do not bend or fold the strip.
- đ ONE SIZE FITS MOST - ONLY FITS TRUCK BED GREATER THAN 48 INCHES IN WIDTH. This led tail light strip is perfect for most pickup trucks. Please measure your truck's tail gate width prior to purchase.
- (Set of 2) 1000 lumens per 1156 bulb, 72 pcs high power & high brightness 3014 SMD LED chips, 360 degree light output; Voltage: 12V-24V, Color: red
- Features: non-polarity design. Intelligent constant current IC, 6063 aluminum for excellent heat dissipation, low temperature long term lasting
- Wide Appalication: brake stop tail light, turn signal blinker light, center high mount stop light, side marker light, parking light, rear fog light etc.
- Cross reference number: 1156 BA15S P21W 1003 1073 1073LL 1095 1141 1141LL 1156A 1156NA 1156ALL 1156LL 1195 12088 1295 1295NA 199 2396 3497 3497LL 631 631LL 7506 7506L 7506ST 7506LL 93 93LL 97 97A 97LL 97NA etc. Please check the owner manual or stock bulb size before purchasing,as Amazon fitment system may not be 100% accurate
- ONE YEAR warranty. For turn signal light upgrade, 50W 6ohm load resistor might be required to avoid hyper flashing as LED bulbs draw less power than stock halogen lamps
- (Set of 2) 1400 lumens per bulb, 2800 lumens per set. 100 pcs 3014 & 3 pcs 2835 high output SMD LED chips, 360 degree light output; Voltage: 12V-30V
- Advantage: Intelligent constant current IC, Wide operating voltage technology, 6063 aluminum for excellent heat dissipation, low temperature long term lasting
- Application: brake stop tail light, turn signal blinker light, center high mount stop light, side marker light, etc.
- Cross reference: 1157 BAY15D 1016 1034 1154 1196 2057 2357 2397 3496 7528 7528L 94 1157A 1178A 2057A 2357A 2357NA etc. Please check the owner manual or stock bulb size before purchasing as Amazon fitment system may not be 100% accurate
- Warranty: one year warranty. For turn signal lights, 50W 6-ohm load resistor or flasher relay might be needed to prevent hyper flash or bulb does not blink
- Connector Gender : No Connector
- Connector Quantity : 1
- Harness Length - inches : 7"
- Wire Quantity : 3
- Made of faux fur, soft and comfortable.
- Belt on top of tail. You can tie around your waist.
- Tail is about 14 inch long. If you want other size, please contact us for custom.
- Fox tail for cosplay costume, fancy dress on Halloween party. It will work like a charm!
- Fluffy, Lovely, Kawaii!
- đ High Quality: The T15 LED bulb is made of PCB and aviation grade aluminum parts, newly upgraded LED chips with ultra-high brightness and stronger light concentrating. Built-in constant current IC driver, ensures reliability even with voltage fluctuations.
- đ Features: T15 921 LED bulbs with high power 45SMD 4014 chipsets, bulb size is 1.57" x 0.55". Aviation aluminum material for efficient heat dissipation, stable input current protects the circuit, ensure the secure temperature range and consistent brightness out.
- đ Installation: Non polarity design, just plug and play, no need to reverse it to match its polarity. Low power consumption, high brightness, strong focus, 360° no dead angle, intelligent heat dissipation, and making the service life of LED bulbs up to 50,000 hours.
- đ Application: Perfect upgrading stock T15 backup reverse lights for a brighter visual and safer driving. Can be used for turn signal light, blinker lights, interior cargo trunk lights, side marker lights, tail lights, corner lights, etc. Much brighter than original bulbs.
- đ Package: 4 pcs T15 LED bulb. Built-in smart IC driver, no blind spot, quality aviation aluminum heat sink for the best cooling and light performance. It has good waterproof and dustproof properties, allowing you to deal with the impact of various bad weather.
- ăSizeăHead Diameter: 19mm Stem Length: 11mm Fits Into 12mm Hole,hight quality materials, Meets or exceed OEM standards.
- ăPart Numberă68084593AA; Meets or exceed OEM standards. please check the part number before purchasing to ensure fitment, These May Not Fit All Vehicles.
- ăCompatibilityăCompatible With Dodge Ram 1500 2007-2010, Ram 2500 2007-2010, Ram 3500 2007-2010; Ram:1500 2011-2013, 2500 2011-2012, 3500 2011-2012,
- ăOther Nameă Insulator Clip, Insulator Pin, Insulator Pad Retainer Clip, Bumper Cover Retainer, Insulation Retainer, Silencer Retainer, Insulator Pad Retainer, Silencer Retainer Clip, Splash Shield Retainer, Door Trim Panel Retainer.
- NOTE: Please Compare Your Clips to These Before Purchasing, As These May Not Fit All Vehicles. If you have any questions about the product, you can contact us by email, we will solve you as soon as possible.
- Include: 20 x Tail light Lamp Retainer Clip
- OE Number:68084593AA
- Size: Head Diameter: 0.74" (19mm); Stem Length: 0.4" (10mm); Fits Into 0.46" (12mm) Hole.
- Compatible with Dodge Ram 1500, 2500, 3500 (2007-2013)
- Easy to Install, Direct fit, Note: Requires 2 clips per taillight
- ăHigh Performanceă:Our extremely bright LED bulbs are integrated 50 1206-SMD, no bulbs are needed. Features provides you 360°of light inside your car,600LM lumens brightness by using only 5W. Excellent replacement for the traditional halogen bulb,saving a lot of money on your electricity bills and reducing replace LED light frequency.
- ăTime-saving Installationă: Non-polar LED interior car lights are plug and play with Non-polarized plugs,it won't take much time or effort.ăWarm TipsăThis lighting compatible with 1156 1141 1003 7506 BA15S 1073 1095 1383 1156A 1156NA 1195 12088 1295 1295NA 199 2396 3497 5007 5008 631 93 97 97A 97NA etc.
- ăWide Applicationă: The ultra-small size (1.37*0.74inch) makes it ideal for setting up in multiple locations. Perfect for tail lights,reverse lights,brake lights,parking lights,center high mount stop lights and turn signal lights of RV camper trailer boat interior lights.
- ăFriendly reminderă:Amazon's model matching data may not be 100% accurate and your vehicle's bulb size may be different. Please double check the owner's manual or original bulb size to confirm/ Note: Measurements are taken manually and slight errors in size are allowed.Please check the base compatibility of these lights before ordering.
- ăEye protection and safetyă:The automotive LED light is made of aircraft grade aluminium circuit board, stable and durable, almost no delay and flicker, natural and even light source allows you to reduce your visual fatigue. Light source 3 times brighter than conventional halogen bulbs, effectively reducing the occurrence of traffic accidents!
- [Socket Name] 1156 (BA15S) socket
- [Size] The size of 1156 LED bulb socket is 5.9 "x 1.4" (L * D); Wire length: 4.3 inches.
- [Durable]The car brake light lamp holder is made of high-quality plastic and metal, waterproof and durable.
- [Function] Provide excellent replacement parts for your car to keep the 1156 (BA15S) LED bulb good, stable and firm.
- [Application] The 1156 base harness plug connector can be used for the modification of brake light, steering light and reversing light.
- ăGREAT OUTPUTă- Yorkim 1157 LED bulb is built with 21 PCS powerful 2835 SMD LED chips on multiple sides paired with an integrated special PC lampshade, 360 degree lighting angle, super bright without dark spots or shadow area, bright but no dazzling, 300% Brighter than halogen bulbs
- ăLONG LIFESPANăchips: 2835 chips, voltage: 10-30V, color: Red, lumen: 1500lm/bulb, Watt: 3.6W/bulb. Full aluminum housing and built-in upgraded smart IC driver for high heat consumption, constant current and great perfomance, lifespan can be up to 50,000 hours
- ăSAFE AND QUICKERă1157 led bulb is instant start, no delay, safe and reliable enough, no glare to other drivers. NOTE: When used as Turn signal lights Brake lights, a load resistor might be needed to prevent hyper flashing issue
- ăEASY INSTALLATIONăNo-polar design, fit in standard 1157 socket, just remove the original bulb and insert this 1157 LED bulb, plug and play in 10 minutes, no different than installing a normal bulb
- ăMULTI APPLICATIONăFit for 1157 BAY15D 1016 1034 1157 1157A 1178A 1196 2057 2057A 2357 2357A 2357NA 2397 3496 7528 ect, replacement for Brake Light, Tail Lights, Parking Lights, Stop Lights, and etc
- ăUltra Brightă- AUTOONE 1157 led bulb is 360 degrees illumination increase the brightness and visibility, 300% brighter output than halogen, without dark spots, no glare to other drivers. Instant start, no delay, safe and reliable enough. ăDual Brightnessă- There are dual brightness in the same bulb. The dim mode is tail light, the bright mode is brake light
- ăFitmentă- Compatible with 1157 BAY15D 1157 1157NA 1157A 1178A 1196 2057 2057A 2357 2357A 2357NA 2397 7528 sockets. ăApplicationă- Great replacement for brake light, tail light. Plug and play, non-polarity
- ăLonger Working Hoursă- AUTOONE 7528 led bulb is aircraft grade aluminum body built and unique bump appearance design increase the heat dissipation area. Wide voltage & constant current provide up to 45, 000 hours lifespan and low power consumption. No more frequent changes improved driving experience
- ăSpecificationsă- 5pcs high power 3030 SMD chipsets, 18pcs 4014 SMD chipests; Power: 7.5W/ Bulbs; Voltage: 9~18V DC; Current: 0.62A; Lumen: 1400 LM/ Bulbs; IP67 Waterproof; Lifespan: 45,000+hours; Light Color: Brilliant Red
- ăWorry Free Serviceă- Built-in intelligent IC driver, AUTOONE 1157 bulb are suitable for most of vehicle computer systems without error or flicker, but some sensitive models may require a canbus decoder or load resistor, please get in touch with us to get free decoder or any other problem
- High Quality: Self-adhesive, peel and stick, stretchable with heat and water resistant, easily cleansed with water and easy to remove without residual.
- Products Include: 1 Vinyl wet tint wrap , 1 including yellow detailer squeegee. Which allows you to install the tint dry ( without installation liquid ) Ready to use out of the box.
- Size: 16 Inch x 48 Inch, universal fitment for headlight / fog lights / tail lights - car trucks SUV jeep motorcycle and various applications.
- Easy-Install: Has additional a 3rd layer protective film to protect the vinyl sheet from scratches during shipping (make sure to remove this protective film during. installation) UV protected / also be used with a heat gun or household blow drier for shaping
- Enjoy Warranty: You will get quality products, if you have any questions, please contact us, we are always waiting for you here.
Last update on 2023-07-30 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API
How Do You Buy The Best 1988 Jeep Comanche Tail Lights?
Do you get stressed out thinking about shopping for a great 1988 Jeep Comanche Tail Lights? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 1988 Jeep Comanche Tail Lights, which is why we have assembled a comprehensive list of the greatest 1988 Jeep Comanche Tail Lights available in the current market. We’ve also come up with a list of questions that you probably have yourself.
Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 1988 Jeep Comanche Tail Lights that you consider buying. Your questions might include the following:
- Is it worth buying an 1988 Jeep Comanche Tail Lights?
- What benefits are there with buying an 1988 Jeep Comanche Tail Lights?
- What factors deserve consideration when shopping for an effective 1988 Jeep Comanche Tail Lights?
- Why is it crucial to invest in any 1988 Jeep Comanche Tail Lights, much less the best one?
- Which 1988 Jeep Comanche Tail Lights are good in the current market?
- Where can you find information like this about 1988 Jeep Comanche Tail Lights?
We’re convinced that you likely have far more questions than just these regarding 1988 Jeep Comanche Tail Lights, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for 1988 Jeep Comanche Tail Lights, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 1988 Jeep Comanche Tail Lights. Make sure that you are only using trustworthy and credible websites and sources.
Romance University provides an 1988 Jeep Comanche Tail Lights buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 1988 Jeep Comanche Tail Lights currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of 1988 Jeep Comanche Tail Lights has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an 1988 Jeep Comanche Tail Lights?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your 1988 Jeep Comanche Tail Lights.
- Customer Ratings: Number ratings grade 1988 Jeep Comanche Tail Lights objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 1988 Jeep Comanche Tail Lights.
- Product Quality: You don’t always get what you pay for with an 1988 Jeep Comanche Tail Lights, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an 1988 Jeep Comanche Tail Lights is should be an indication of how long it will work out for you.
Romance University always remembers that maintaining 1988 Jeep Comanche Tail Lights information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding 1988 Jeep Comanche Tail Lights is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
Related Post:
- 1988 Jeep Comanche Tail Lights
- 1988 Jeep Comanche Fuel Sending Unit
- Jeep Comanche Tail Lights
- Jeep Comanche Tail Lights For Sale
- Jeep Comanche Tail Lights For Sale
- Comanche Tail Lights
- 1988 Cutlass Supreme Tail Lights
- Jeep Comanche Door Panels
- Jeep Comanche Door Panels
- 1989 Jeep Comanche Fuel Sending Unit