20 Best 2001 Jeep Cherokee Sport Shocks of 2023 – Romance University

After hours researching and comparing all models on the market, Romance University finds out the Best 2001 Jeep Cherokee Sport Shocks of 2023. Check our ranking below.

2,797 Reviews Scanned

Rank No. #1

2pcs Rear Liftgate Lift Support Gas Charged Struts Shocks Prop for Jeep Cherokee 1997-2001 HATCH Support 4291,SG214022

▲ Compatible：Rear Hood Lift Support for 1997, 1998, 1999, 2000, 2001 Jeep Cherokee 4291,SG214022 lift support hood struts.
▲ Interchange Part Number : 4291,SG214022,8194716,10651,3741VD,55076208, 55076208AB,RB8795771,95771,611681
▲ Quality：Rust-resistant Nit-ride corrosion resistant piston rod extends product life, Multi-Lobe Seal make gas springs more tolerant to vibration and extreme temperature, 100% brand new and tested to meet or exceed OEM specifications.
▲ Function：Use compressed gas, contained in a cylinder and compressed by a piston, to exert a force to support the weight of front hood or rear liftgate tailgate hatchback doors while they are open, no need to hold the door up with your head.
▲ Easy Installation：Easy to install with simple hand tools in just minutes，Extended Length[in]:22.21" Compressed Length[in]:15.35" one year Warranty

Rank No. #2

A-Premium Rear Tailgate Liftgate Hatch Lift Supports Shock Struts Compatible with Jeep Cherokee XJ 1997-2001 Sport Utility 2-PC Set

【Directly Fit】OE replacement lift supports shock struts, easy fit. Easy to install with simple tools in minutes. No special tools required for installation.
【Vehicle Fitment】Compatible with Jeep Cherokee 1997-2001 XJ Series
【Reference Number】55076208AB, 4291, SG214022, 8194716, 10651, 3741VD, 55076208
【Function】High strength leak-proof piston seal; Superior rod finish resists corrosion; Easy lifting and reduce closing effort.
【Buy with Confidence】1 Year Unlimited-mileage Quality Guarantee---We extremely value your satisfaction and strive to provide you good shopping exprience. Any further question, please feel free to contact us at any time

Rank No. #3

BRTEC Liftgate Lift Support Struts Shocks for 1997-2001 for Jeep Cherokee Sport Utility

Compatible with: Jeep Cherokee Sport Utility(1997-2001 Base 4-Door; 1997-2001 Classic 4-Door; 1997 Country 4-Door; 1998 1999-2001 Limited 4-Door; 1997-2001 SE 2-Door; 1997-2001 SE 4-Door; 1997-2001 Sport 2-Door; 1997-2001 Sport 4-Door) Note: Please refer to the description for specific models.
Specification and position: Compressed length:15.35 in; Extended length: 22.2 in; Position:liftgate
Quality guarantee: 18-Month Warranty & Best Service! After QPQ processing, the stroke rod surface light clear, small friction resistance, no blunt, anti-rust, anti-wear.
Reference Number: 4291,SG214022,8194716,10651,3741VD,55076208, 55076208AB,RB8795771,95771,611681
Easy installation: The tailgate prop easy to install with simple hand tools in just minutes, can bring you a comfortable and fast experience. See the listing picture for detailed installation steps.

Rank No. #4

2700 - SENSEN Shocks Struts, Full Set, 4 Pieces,

Precision designed for a direct fit and restore factory ride height.
All components manufactured to meet or exceed OE specifications for fit and function.
Quality Control system certified by ISO9001:2000 and ISO/TS 16949:2002
SENSEN limited lifetime warranty, Purchase with confidence.

Rank No. #5

Monroe Shocks & Struts 58594 Shock Absorber and Coil Spring Assembly, Pack of 2

REDUCES SAG UNDER LOAD -- Ideal for occasionally hauling or towing varying loads; heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission; see owner's manual)
EXCEPTIONAL HANDLING -- Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
CONSISTENT RIDE -- OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
LONGER SERVICE LIFE -- Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
IMPROVES PERFORMANCE -- Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade

Rank No. #6

Rough Country 4.5-6" N3 Rear Shocks for 84-01 Jeep Cherokee XJ - 23170_A

10 Stage Variable Valving, Military Fluid Rated To -50 Degrees C
Nitrogen Charged, Rubber Bushings, 36kN Tensile Strength
Fast Cooling 54mm Shock Body
Spring Loaded Piston Rod Seal. Military Spec. Fluid Rated To -40? C
Backed by Rough Country's Limited Lifetime Replacement Warranty.

Rank No. #7

Rough Country 6.5-7" N3 Rear Shocks for 84-01 Jeep Cherokee XJ - 23253_A

10 Stage Variable Valving, Military Fluid Rated To -50 Degrees C
Nitrogen Charged, Rubber Bushings, 36kN Tensile Strength
Fast Cooling 54mm Shock Body
Spring Loaded Piston Rod Seal. Military Spec. Fluid Rated To -40? C
Backed by Rough Country's Limited Lifetime Replacement Warranty.

Rank No. #8

Best Motoring International - Super Battle

Amazon Prime Video (Video on Demand)
GT Channel (Director)
English (Playback Language)
English (Subtitle)

Rank No. #9

ECCPP 2pcs Rear Liftgate Lift Supports Struts Rods Gas Springs for Jeep for Cherokee 1997-2001 4291 SG214022 lift support

FITMENT - Rear lift supports prop rods shocks props gas spring for Jeep for Cherokee 1997 1998 1999 2000 2001 compatible with 4291 SG214022 lift support struts
QUALITY - Rust-resistant Nitride corrosion resistant piston rod extends product life, Multi-Lobe Seal make gas springs more tolerant to vibration and extreme temperature, 100% brand new and tested to meet or exceed OEM specifications
FUNCTION - Use compressed gas, contained in a cylinder and compressed by a piston, to exert a force to support the weight of front hood or rear liftgate tailgate trunk hatchback doors while they are open, no need to hold the door up with your head
EASY INSTALLATION - Easy to install with simple hand tools in just minutes - no special tools required for installation
NOTICE - Please check the description and compatibility chart before your purchasing. We provide ONE YEAR WARRANTY for all our lift supports. Please contact us if you have any question

SaleRank No. #10

Monroe Shocks & Struts Max-Air MA765 Air Shock Absorber, Pack of 2

MAINTAIN RIDE HEIGHT UNDER LOAD -- Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission; see owner's manual)
EASY TO ADJUST -- Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor; pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
EXCEPTIONAL HANDLING -- Full-displaced valving on compression and extension cycles for a smooth ride
BUILT TO LAST -- Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
CONSISTENT RIDE -- OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction

Rank No. #11

Monroe Shocks & Struts Monro-Matic Plus 32197 Shock Absorber

CONSISTENT RIDE -- Velocity Proportional Valving (VPV) technology and all-weather fluid containing special additives to reduce friction and ensure smooth rod reaction and an overall smoother ride
RELIABLE PERFORMANCE -- Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration
RESTORES RIDE AND HANDLING -- Larger bore provides more efficient damping control to provide consistency and a smooth ride (where applicable)
BUILT TO LAST -- Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while banded piston and bronze reinforced guide provide durability
GET MORE MILES FROM YOUR RIDE -- Designed and validated to meet OE spec and deliver consistent performance

Rank No. #12

DC Voltage Reducer Converter, DC 24V to 12V 5A Buck Converter, Automatic Car Step Down Up Voltage Regulator, Transformer Waterproof Module

Rank No. #13

Fuck IT Edition Emblem Decal, Car Fender Bumper Hood Trunk Door 3D Badge Sticker Decal Replacement Accessories for Car Truck SUV(Black White)

【High-Quality Material】Fuck IT edition emblem decal is made of high-quality zinc alloy material, which is durable, waterproof, fade-resistant, sun-proof, rust-resistant, and will not fade or crack easily.
【3D Design】The raised badge letter has a beautiful bevel to fit the curved, complex concave surface, creating a cool 3D effect.
【Easy to Install】Fuck IT edition badge can be easily installed without any tools, you just need to peel off the protective film and stick it to the correct position. Remember to clean the target location and keep it dry before installation.
【WIDE APPLICATION】Fuck IT Edition emblem is suitable for most cars, trucks and SUVs, and can be pasted anywhere you want, such as tailgate, fender, bumper, hood and car interior. You can also use it to decorate your laptop, table, door or window.
【Quality Service】If you have any questions about the product, please feel free to contact us, we will reply as soon as possible.

Rank No. #14

Rough Country 0-4" N3 Rear Shocks for 84-01 Jeep Cherokee XJ - 23172_A

10 Stage Variable Valving, Military Fluid Rated To -50 Degrees C
Nitrogen Charged, Rubber Bushings, 36kN Tensile Strength
Fast Cooling 54mm Shock Body
Spring Loaded Piston Rod Seal. Military Spec. Fluid Rated To -40? C
Backed by Rough Country's Limited Lifetime Replacement Warranty.

SaleRank No. #15

LivTee 120pcs Retainer Clips Push Type Fasteners 6.3mm 8mm 9mm 10mm Expansion Screws Replacement Kit Bumper Push Rivet Clips with Remover Tool fit for GMC Ford Toyota Honda Chrysler Acura

4 Hole sizes from 6.3mm(1/4"), 8mm(5/16" ), 9mm(23/64" ), 10mm(25/64" ). Six kinds of different push pin rivet for many brand vehicles.
High-quality nylon material: These car clips are made of high-quality black nylon material, which has anti-wear and anti-corrosion effects. This push-in cage kit will not easily break or rupture during use.
Wide range of applications: Push-in cage kits, with 12 common sizes, widely used in automotive panels, decorative panel clips, door trim clips, door panel clips, bumper clips, fender panel clips, hoods The replacement of the splash plate holder is common to most models and is fit for Ford Toyota Acura GMC Chrysler Lexus etc.
Easy to install: The product is equipped with a screwdriver, easy to operate, easy to install and remove. Small size, easy to store or carry around.
BUY WITH CONFIDENCE: Any other problem please feel free to contact us, we are always here to satisfy all of you.

Rank No. #16

Rear Liftgate Lift Supports Struts Shocks Gas Springs for 1997-2001 Jeep Cherokee 4291 SG214022,Pack of 2

Fit for 1997-2001 Jeep Cherokee
Placement on Vehicle: Rear Left & Right
Extended Length[in]:22.21" Compressed Length[in]:15.35"
Interchange Part Number : 4291,SG214022,8194716,10651,3741VD,55076208, 55076208AB,RB8795771,95771,611681
Easy to Install in Just Minutes and No Special Tools Required for Installation

Rank No. #17

Monroe Shocks & Struts Monro-Matic Plus 32252 Shock Absorber

CONSISTENT RIDE -- Velocity Proportional Valving (VPV) technology and all-weather fluid containing special additives to reduce friction and ensure smooth rod reaction and an overall smoother ride
RELIABLE PERFORMANCE -- Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration
RESTORES RIDE AND HANDLING -- Larger bore provides more efficient damping control to provide consistency and a smooth ride (where applicable)
BUILT TO LAST -- Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while banded piston and bronze reinforced guide provide durability
GET MORE MILES FROM YOUR RIDE -- Designed and validated to meet OE spec and deliver consistent performance

Rank No. #18

Car Hood Prop Struts Clamp Hood Strut Clamp Lift Support Clamp 0.55 Inch Hood Lift Support Clip for Car Rod Retaining Holder Tool (8 Pcs)

Designed for Lift Rod: our car lift support tools with clamp is well designed for car engine hood lift rod, the lifting support struts have locking nuts to reduce the possibility of loosening, and hood clamps for lift support prevent dropping or sagging
Wide Applications: this sort of hood strut clamp is suitable for lift rod measuring about 0.55 inch, available for most car engine hoods, tailgates, or hatch struts; It is quite useful under bad weather conditions when you are in the outside
Easy to Install: the hood prop rod clamp is easy for you to use, and you simply insert and clip the clamp and adjust it upon actual needs, without drilling or other special hand tools
Quality Material Selection: made of quality aluminum alloy material, our lift support clamp is sturdy and solid, reliable and stable in structure, strong enough against breakage, wear, fracture and rust, serving you for a long time use
Safe and Convenient: the hood strut clamp can save more efforts when you have a repair work or check, and the weight that drops when it fails can be dangerous, the lift support tool will prevent this from happening exactly

SaleRank No. #19

Dewkou Pack-2 Car Front Windshield Washer Nozzles, Car Double-hole Wiper Washer Nozzle Kit, Fits for Most Cars Chrysler BMW Buick Chevrolet Dodge Sprayer Replacement Parts (Black)

🚖 Package Contains: 2 x front windshield nozzles and 2 x washers. Thread diameter 0.31In, length 1.14In.
🚖 Durable Quality: The windshield washer nozzle kit is made of high quality plastic and metal materials. Strong and durable, windshield washer nozzle kit is not easy to break, perfect for or replacing old wiper nozzles.
🚖 Double-headed Jet: 2 nozzle heads can spray simultaneously to help keep your windshield clear and your road view unobstructed when it is covered with dust, fog, falling snow or other contaminants. This nozzle kit is designed to take the hassle out of your life. Clean your truck's windshield for safe driving.
🚖 Compatibility: The windshield nozzle is suitable for a large number of vehicles Ford, Chrysler, Subaru, Honda, BMW, Buick, Chevrolet, Dodge and many other models.
🚖 Easy to Install: Remove fragile parts from old hose, push front windshield washer nozzle into hood and snap into place. Adjust the spray angle of the nozzle. Perfect fit, ideal replacement for OEM standards.

Rank No. #20

200PCS Car Retainer Clips Plastic Fasteners Kit, Popular Sizes Auto Push Pin Rivets, Universal Plastic Panel Fender Clips, Assorted Car Body Plastic Push Pin

-Great Assortment Push Retainer Kit with 6 popular size for many brand vehicles. ll the necessary retainers for exact replacement of old and broken retainer.
- Made of high quality black nylon material, these bumper clips are abrasion and corrosion resistant and won't break or crack easily during use.
- These Push clips are widely used for trim panel clips, door trim clips, door Panel clips, bumper clips, fender clips, engine cover and splash shield retainers replacement.
-All packed in a container for easy storage. You can find 200PCS automotive push type retainer kit in the packaging bag and no need to go to the auto parts store to buy different fasteners.
- Package Include: Includes 30 pcs 6mm Clips , 30 pcs 7mm Clips, 30 pcs 8mm short Clips, 50 pcs 8mm long Clips, 30 pcs 9mm Clips, 30 pcs 10mm Clips.

Last update on 2023-08-16 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best 2001 Jeep Cherokee Sport Shocks?

Do you get stressed out thinking about shopping for a great 2001 Jeep Cherokee Sport Shocks? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 2001 Jeep Cherokee Sport Shocks, which is why we have assembled a comprehensive list of the greatest 2001 Jeep Cherokee Sport Shocks available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 2001 Jeep Cherokee Sport Shocks that you consider buying. Your questions might include the following:

Is it worth buying an 2001 Jeep Cherokee Sport Shocks?
What benefits are there with buying an 2001 Jeep Cherokee Sport Shocks?
What factors deserve consideration when shopping for an effective 2001 Jeep Cherokee Sport Shocks?
Why is it crucial to invest in any 2001 Jeep Cherokee Sport Shocks, much less the best one?
Which 2001 Jeep Cherokee Sport Shocks are good in the current market?
Where can you find information like this about 2001 Jeep Cherokee Sport Shocks?

We’re convinced that you likely have far more questions than just these regarding 2001 Jeep Cherokee Sport Shocks, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for 2001 Jeep Cherokee Sport Shocks, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 2001 Jeep Cherokee Sport Shocks. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an 2001 Jeep Cherokee Sport Shocks buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 2001 Jeep Cherokee Sport Shocks currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of 2001 Jeep Cherokee Sport Shocks has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an 2001 Jeep Cherokee Sport Shocks?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your 2001 Jeep Cherokee Sport Shocks.
Customer Ratings: Number ratings grade 2001 Jeep Cherokee Sport Shocks objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 2001 Jeep Cherokee Sport Shocks.
Product Quality: You don’t always get what you pay for with an 2001 Jeep Cherokee Sport Shocks, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an 2001 Jeep Cherokee Sport Shocks is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining 2001 Jeep Cherokee Sport Shocks information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding 2001 Jeep Cherokee Sport Shocks is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

20 Best 2001 Jeep Cherokee Sport Shocks of 2023 – Romance University

How Do You Buy The Best 2001 Jeep Cherokee Sport Shocks?

Related Post: