Skip to content

20 Best 2008 Lexus Es 350 Body Kit of 2023 – Romance University

After hours researching and comparing all models on the market, Romance University finds out the Best 2008 Lexus Es 350 Body Kit of 2023. Check our ranking below.

2,243 Reviews Scanned

Rank No. #1
ABX Glossy Black Universal Front Bumper Lip Spoiler Diffuser Body Kits + 29"/74.5CM Side Skirt + 17"/45CM Rear Bumper Lip Fit for Most Vehicles 8PCS
  • 【Universal Front Bumper Lip】This front bumper lip splitter is fit for most models with front bumper size around 62.99 inch-72.04 inch, Fit For Honda Mitsubishi Toyota Kia Infiniti Sedan Mazda, Subaru, VW, Lexus, Audi, BMW, Benz, Ford, Honda, Toyota, VOLVO,ect.
  • 【Premium ABS material】 Package Included: Front Bumper Lip + 29"/74.5CM Side Skirt Splitter + 17"/45CM Rear Lip( with Screws kit). Protect Your Bumper From Scratching. Include instructions.
  • 【Elegant Appearance】Black front bumper lip splitter, elegant and personalized appearance will beautify the appearance of your vehicle and enhance the visual effect.
  • 【Providing Protect】Front bumper guard anti-collision protective, it can reduce wind resistance, prevent your cars from collision and alleviate damage, and protect original bumper from road bumps and scratch.
  • 【Easy Installation】Easy to install and long-lasting use. 9-hole screw positioning makes installation easier and more reliable. Professional installation is highly recommended.
Rank No. #2
Car Trunk Spoiler Roof Lip Kit,3D PU Rear Trunk Lip or Roof Spoiler Sticker Bar with Carbon Fiber Pattern,Car Rear Spoiler Exterior Rear Spoiler Kit, Punch-Free Installation for Most Cars (Carbon)
  • 【Dimensions】Length is 59 inches and width is 1.38 inches. Double-sided tape on the back for easy peel and stick installation.
  • 【High Quality Material】Made of soft and durable PU material, the surface is smooth and bright.
  • 【Bendable】It can be bent freely, can be adjusted according to the radian, freely fit, and highly fit.
  • 【Installation Steps】① Measure the length required for installation, and cut off the excess part. ② Make sure the installation location is clean and dry. ③Tear off the protective film of the double-sided tape (the double-sided tape will stick more tightly if it is slightly heated with a hot air blower). ④ Install the sleeves on both ends, and then glue them on slowly. ⑤ Finally, press firmly in all directions to make sure all places are tightly connected.
  • 【Function】The trunk spoiler can increase the streamlined appearance of the car, making your car look cooler and more stylish. Pair with any car lip for an aggressive sporty look, improve aerodynamics and add style to your car.
SaleRank No. #3
Xotic Tech Universal Front Bumper Lip Chin Spoiler Splitter Diffuser Guard Wing Protector Trim Car Body Kit with Adjustable 8"-11" Support Splitter Rod-Black
  • [Model] - Universal fitment for most vehicle front bumper lip.(Please measure and check the position you are going to install the spoiler, and make sure these splitters will fit your vehicle before purchase.)
  • [Material] - Made of updated durable and sturdy ABS material, no deformation in long-term use.Exquisite Paint through strict quality control standards to build and test.
  • [Design] - Special Grid Design on the back of the front spoiler, physically strong firm and durable, anti-collision and scratch-resistant.
  • [Features] - Elegant surface and exquisite workmanship, perfectly decorate your dear car, always shows your charming and highlight your dear car. Enjoy the super cool and exquisite appearance of your car after installing.
  • [Spoiler Type] - COMPLETE ONE PIECE type front lip splitter with SPECIAL GRID DESIGN on the back , which is much firmer and more stable than those divided into 2 pieces in the middle of the splitter.(The packaging box shown is for illustration purposes only, actual packaging may vary)
Rank No. #4
Made in USA! Compatible with 2007-2012 Lexus ES 350 6 PC Stainless Steel Chrome Pillar Post Trim
  • Premium Quality 304 Stainless Steel 24 Gauges (0.025 inches) Thickness with Mirror Polish Surface. This is NOT the factory pillar post. You need to apply it on top of the factory pillar post.
  • Full 3M Tape On The Back For Easy Installation
  • Sleek Look With Beveled Edges
  • Made in USA with Life Time Warranty.
  • The Trim Can't Be Re-applied Afer Your Initial Installation. Please Test Fitting Before Peel Off The Tape.
SaleRank No. #5
GOOACC GRC-30 120PCS Car Retainer 6.3mm 8mm 9mm 10mm Expansion Screws Replacement Kit Bumper Push Rivet Clips, 1PC Fastener Remover
  • 4 Hole sizes from 6.3Mm(1/4"), 8mm(5/16" ), 9mm(23/64" ), 10mm(25/64" ).
  • 6 different Push pin rivet for many brand vehicles.
  • Great material - these bumper clips are made of high-quality Black nylon Material, anti-wear and anti-corrosion, would not break or crack easily during use.
  • Widely application - these Push clips are widely used for trim panel clips, door trim clips, door Panel clips, bumper clips, fender clips, engine cover and splash shield retainers replacement. It always covers some applications include telecom equipment, motor vehicles, domestic appliances, furniture and electrical equipment.
  • PACKAGE INCLUDED:120PCS 6.3mm 8mm 9mm 10mm Bumper Push Rivet Clips,1PC Fastener Remover
SaleRank No. #6
Xotic Tech Front Bumper Lip Chin Spoiler Splitter Diffuser Protector Body Kit with Adjustable 10"-13" Support Splitter Rod Compatible with Honda Accord Civic, Volkswagen MK5 MK6 MK7, Black w/Red
  • Before buying, please measure the size of the front bumper and check your cars inner mudguard fender to make sure there is space to install (drilling) the front bumper splitter. (As a reference, 70.9" bumper width can fit). Note that the following cases are not applicable: if the original car have a front lip installed, the bottom of the front bumper is not flat enough or the front is too sharp.
  • 【Material】Made of updated durable and sturdy ABS with carbon fiber pattern coating finished, exquisite Paint through strict quality control standards to build and test. No deformation in long-term use. no deformation in long-term use, physically strong firm and durable, anti-collision and scratch-resistant
  • 【Special Design】DIY installation, different cool style reveal no matter you install the detachable Red spoiler or not. Stereoscopic design, fluid curve surface with the special Reinforcing Design on the back of the spoiler, physically strong firm and durable, anti-collision and scratch-resistant. Dramatically Improves The Sporty Appearance. Perfectly decorate your dear car and give your car a more aggressive and racing appearance in a minute.
  • 【Function】The function of the front bumper lip is to deflect the oncoming air. It forces maximum air to go over the top of the vehicle and allows only a minimal quantity of air to pass underneath the vehicle to improves aerodynamic.
  • 【Well Protection】Provide anti-collision protective experience to your original bumper, protect from scrapes from driveways, speed bumps and curbs, alleviate the damage.(The packaging box shown is for illustration purposes only, actual packaging may vary)
Rank No. #7
NTNEV Interior Car Lights, Car Led Bulb, LED Interior Replacement Bulbs of 24 Sets for Interior Map Dome Lights and License Plate Courtesy Lights
  • High-Quality Materials: Vehicle LED lights adopt a variety of LED chips and high-quality circuit boards, constant and high brightness, low light attenuation, good heat dissipation, fluent and convenient to use.
  • Includes: 3 Types for you to choose with 24 LED lights (8 of each type) of three models (25 mm *10 mm, 30 mm *31 mm, 40 mm *10 mm), which is enough to meet your replacement needs in life.
  • Satisfactory Compatibility with Most Vehicles: the LED interior car lights are compatible with various vehicles, including car, truck, cargo, SUV and more, helping you drive the dark away, improving your driving experience at night.
  • Wide Application: Vehicle LED lights interior bulbs kit can replace dome light, map light, courtesy light,glove box light, license plate light, parking light,trunk light, cargo light, vanity mirror light etc.Universal LED lights bulb, not specific, it may fit 2 or more locations on your vehicle.
  • Convenient To Install: Easy plug & play installation, Simply remove your old bulb and install the new LED bulb in it's place, Not occupying too much time and energy.
Rank No. #8
Replacement for 2005-2008 4-Button Keyless Remote Smart Key Fob HYQ14AAB
  • Fits 2005-2008 Lexus
  • Replacement for P/N: HYQ14AAB
  • Complete key fob with electronics and a battery
  • Dealer or automotive locksmith programming is required
  • Works with some Lexus ES, IS, GS, LS Models
Rank No. #9
200PCS Car Retainer Clips Plastic Fasteners Kit, Popular Sizes Auto Push Pin Rivets, Universal Plastic Panel Fender Clips, Assorted Car Body Plastic Push Pin
  • -Great Assortment Push Retainer Kit with 6 popular size for many brand vehicles. ll the necessary retainers for exact replacement of old and broken retainer.
  • - Made of high quality black nylon material, these bumper clips are abrasion and corrosion resistant and won't break or crack easily during use.
  • - These Push clips are widely used for trim panel clips, door trim clips, door Panel clips, bumper clips, fender clips, engine cover and splash shield retainers replacement.
  • -All packed in a container for easy storage. You can find 200PCS automotive push type retainer kit in the packaging bag and no need to go to the auto parts store to buy different fasteners.
  • - Package Include: Includes 30 pcs 6mm Clips , 30 pcs 7mm Clips, 30 pcs 8mm short Clips, 50 pcs 8mm long Clips, 30 pcs 9mm Clips, 30 pcs 10mm Clips.
Rank No. #10
Xotic Tech Front Bumper Lip Spoiler + Side Skirt Splitter + Rear Bumper Lip Wrap Splitter Canard,Compatible with Lexus is ES (Black)
  • Package includes:1 set of Front Bumper Lip Chin Spoiler Guard Body Kits (3pcs) + Side Skirt Splitter (2pcs) + Rear Bumper Lip Wrap Splitter Canard (2pcs)
  • Material:Made of updated durable and sturdy ABS, no deformation in long-term use,waterproof and never fade.
  • Function:Provide an elegant and personalized appearance, provide anti-collision protective experience to your original bumper, protect from scrapes from driveways, speed bumps and curbs, alleviate the damage
  • Compatibility:Perfect compatible with Lexus IS ES,It won't scrape the paint off or damage the original equipment. Enjoy the super cool and exquisite appearance of your car after installing.
  • Note:1.Please measure the position you are going to install the package, and make sure these splitters will fit your vehicle before purchase 2.Professional installation is highly recommended 3.Product may require drilling holes and use the screws to permanently secure.
Rank No. #11
Miytsya 2 PCS Rear Bumper Canard Diffuser Splitter Protector Universal Rear Bumper Lip Body Kit Rear Side Skirt Valence Spoiler (Bright Black)
  • ★ Exquisite Workmanship: Premium quality ABS material in great finished, light, anti-corrosion, rust resistant and never fade. High temperature resistant, ensures maximum strength and durability for long lasting usage.
  • ★ Function: The rear bumper diffuser can absorb impacts and prevents scratches, smooth and delicate cross-section, effectively protects the bumper from bump damages or scratch when stopping or parking.
  • ★ Fitment: Universal for most of car models, fluid curve surface, only use on rear bumper, gives your car exterior a more luxury and glamorous look in a minutes.
  • ★ Easy to Install: Clean the installation location, it can be mounted on screw or stick with double side adhesive tape. Product may require drilling holes and apply bolts to attach to your bumper.
  • ★ After Sale: If you have any question on use, kindly contact us at any time directly, we will solve the problem for you within 24 hours on weekdays.
Rank No. #12
X AUTOHAUX 1 Pair Steering Wheel Volume Control Switch Button Replament for Lexus ES350 2007 2008 2009 2010 OE Number 84250-33190-C0 Left and Right Side
  • Replace Part Number: 84250-33190-C0.
  • Fitment: for Lexus ES350 2007 2008 2009 2010.
  • Before Install:Go online and learn how to remove the old , volume control switch button,follow the instructions to the letter.After the switch button is removed, the install is pretty straightforward.
  • Replace:Directly replace the old steering wheel control switch.Makes steering wheel look new again from replace the old steering wheel control switch or malfunctioned original ones.
  • The product included left and right side steering wheel volume control switch button. Replaces 9 buttons on your steering wheel.
Rank No. #13
Xotic Tech Front Bumper Lip Spoiler + Side Skirt Splitter + Rear Bumper Lip Wrap Splitter Canard
  • 👍1 set of Front Bumper Lip Chin Spoiler Guard Body Kits (3pcs) + Side Skirt Splitter (2pcs) + Rear Bumper Lip Wrap Splitter Canard (2pcs)
  • 👍Material: Premium quality ABS
  • 👍Stereoscopic design, fluid curve surface
  • 👍No block to the front ground clearance, effectively enhance the side extension
  • 👍This is a x Xotic Tech Trademark Brand product, exclusively available at Xotic Tech.
Rank No. #14
3Pcs Car Front Bumper Lip Spoiler Wing Body Kit Compatible with Lexus IS350 IS250 F-Sport 14-16, Carbon Fiber Look
  • This front lip is compatible with Lexus IS350 IS250 2014-2016, fits F-Sport models Only.
  • Come with [1] 3pcs carbon fiber look front lip with vertical stabilizer, it can add different look to your vehicle than stock or to replace old and worn lip.
  • It is constructed of ABS plastic construction to ensure a long lasting performance life in outdoor conditions.
  • Designed to fit vehicle as stated, adds different look to your vehicle than stock, can be painted or installed as is
  • Drilling for the installation is required, need to use an electric drill or bit driver install the self‐tapping screws onto the bumper to hold the bumper lip in place. Please note: Professional installation is highly recommended.
SaleRank No. #15
Miytsya 2 PCS Car Fender Side Vents, ABS Carbon Fiber Spoiler, Fender Decorative Stickers, Air Flow Intake Hole Grille Auto Exterior Accessories Universal (Carbon Fiber Black)
  • ★ Size Detail: Length-16.1in(41cm), width-3.5in(9cm), thickness-0.6in(1.5cm).
  • ★ Material: High quality ABS plastic material for long time use.
  • ★ Features: Popular fender fin duct. It's a mini type that doesn't boldly claim, but its presence is outstanding. Give the car body an outstanding look. The side of the car is more luxurious than it was originally.
  • ★ Installation: 1. Be sure to check the fitting before installation. 2. Before installing, wipe off the car body and attach it. 3. Carefully place the product in the correct position, apply the trim and press it to ensure it has good adhesion. 4. Do not wash the car for 24 hours to get good adhesion.
  • ★ After Sale: If you have any question on use, kindly contact us at any time directly, we will solve the problem for you within 24 hours on weekdays.
Rank No. #16
35 PCS Engine Under Cover Splash Shield Guard Body Bolts, Splash Shield Guard Retainer Bumper Fender Liner Fastener Rivet Clips and Extruded U-Nuts Kit
  • [Package Includes] The car clip kit includes 10 extruded U-nuts, 15 body bolts with built-in fender washers, and 10 plastic push clips.
  • [Material] The body bolt of the splash shield of the engine lower cover is made of high hardness steel or high-quality nylon material, which is very strong, rust-proof and anti-corrosion, and will not break easily.
  • [Easy to Use] The installation is very simple, just fix it on the correct installation point.
  • [Function] These bumper retainer clips are widely used for the replacement of radiator fork trim panel door trim panel bumper car fender horn side skirt grille wheel well intake engine hood fender and fender guard retainer rivet clips.
  • [Compatibility] Bumper clips is compatible with 2003-2008 Infiniti G35 sedan, 2003-2007 Infiniti G35 Coupe, 2008-2014 Infiniti G37 and G37X, 2003-2008 Infiniti FX35 and FX45, 2008-2012 Infiniti EX35, 2009-2014 Nissan 370Z, 2003-2009 Nissan 350Z.
Rank No. #17
RANSOTO Xenon HID Headlight Ballast Control Unit with Igniter D4S Bulb Compatible with 2006-2012 Lexus IS250 GX460 ES350 GS300 GS350 & Toyota Prius Avalon, Replaces DDLT003 85967-52020 KDLT003
  • Compatible With: 2008-2010 Toyota Avalon, 2006 2007 2008 2009 Toyota Prius, 2006-2008 Toyota Solara, 2009-2012 Toyota Venza, 2006-2010 Lexus SC430, 2007-2014 Lexus ES350 ES350h, 2007-2012 Lexus LS460 LS460L LS600h, 2009-2012 Lexus RX350 RX450h, 2010-2013 Lexus GX460, 2006-2011 Lexus GS300 GS350 GS430 GS450h Gs460, 2004-2011 Lexus IS250 IS350 IS350F IS250C IS350C
  • Repalce Part Numebr: 85967-24010, 85967-33031, 85967-51050, 85967-51040, 85967-51051, 85967-33030, 85967-52020, 86967-52021, 85967-20010, 85967-20011, 85967-24011, 85967-52021, 85967-53040, 85967-06020, 81107-47150, DDLT003,KDLT003, 031100-0293, 031100-0390, 031100-0294, 031100-0296, 031100-0391, 031100-0561, 031100-0295, 031100-0394, 031100-0460, 031100-0610, 39000-78496, 39000-78515, 39000-78258, 39000-78259, 39000-78277, 39000-78311, 39000-78287, 85967-0E010, 85967-20021, 81107-33761
  • Package Including: 1x Xenon Ballast Control Unit, 1x Igniter, 1x D4S bulbs.
  • Function: It is designed to provide the voltage needed when we open the lamp and regulates the electrical current of the light once it is lit.
  • Warranty : We have a half-year warranty. If you have any questions, please contact us in time and we will reply within 24 hours
Rank No. #18
50PCS Door Trim Panel Retainers Clips Compatible with Toyota, Lexus, Camry, High Lander, RAV4, FJ Cruiser, 4-Runner ES 350, GX 470, is 250, is 350, is F, LS 460 & LS 600HL 90467-A0005
  • High-Quality -- White Nylon,, anti-wear, and anti-corrosion, would not break or crack easily during use.
  • Size -- Top Head Diameter: 13mm; Bottom Head Diameter: 18mm; Stem Diameter: 8.5mm; Stem Length: 14mm; Overall Length: 20mm.
  • Replacement For -- 90467-A0005 (90467-09206, 90080-46313, 90080-46312, 90467-T0019)
  • Fits -- Scion: iM, iQ, tC, xA, xB, xD; Toyota: 4Runner 2001-On, Avalon, C-HR, Camry, Corolla, Corolla iM, FJ Cruiser, Highlander, Land Cruiser, Matrix, Prius, Prius C, Prius Plug-In, Prius Prime, Prius V, RAV4, Sequoia, Sienna, Tacoma, Tundra, Venza, Yaris
  • Fits -- Lexus: CT200h, ES300, ES300h, ES330, ES350, GS F, GS Turbo, GS200t, GS300, GS350, GS450h, GX460, GX470, HS250h, IS F, IS200t, IS250, IS300, IS350, LC500, LC500h, LS460, LS 600HL, LX470, LX570, NX200t, NX300, NX300h, RC F, RC200t, RC300, RC350, RX330, RX350, RX350L, RX400h, RX450h, RX450hL, SC430
Rank No. #19
1A Auto Halogen Headlight Headlamp Light Lamp Pair Set Kit for 07-09 Lexus ES350 ES 350
  • Direct Fit, OE Replacement Headlight Set
  • Kit Includes: (1) Passenger Side Headlight; (1) Driver Side Headlight
  • Vehicle Specific: Check fitment information in the listing for compatibility
  • OE Reference Number(s): 8113033670,8117033670
  • Aftermarket Reference Number(s): 20690001,8113033670,8117033670,LHT02401,LHT02402,LHT02403,LX2502134,LX2503134,TY982A001L,TY982A001R
Rank No. #20
AKKON - For 2007 2008 2009 Lexus ES350 ES 350 Driver Left + Passenger Right Side Halogen Type Headlights Pair
  • Fits 2007-2009 Lexus ES350 Halogen Type Headlights Models, ***Not Compatible with Factory HID Type Headlights***
  • Comes in a Pair, Which Means Included Left Side (Driver Side) & Right Side (Passenger Side)
  • Direct Bolt On Replacement For Your Original Headlights, No Wiring or Any Other Modification Needed
  • Items Do Not Include Light Bulbs, No Installation Guide Included, Professional Installation is Highly Recommended
  • 90 Days Limited Warranty on All of Our Product

Last update on 2023-07-30 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best 2008 Lexus Es 350 Body Kit?

Do you get stressed out thinking about shopping for a great 2008 Lexus Es 350 Body Kit? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 2008 Lexus Es 350 Body Kit, which is why we have assembled a comprehensive list of the greatest 2008 Lexus Es 350 Body Kit available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 2008 Lexus Es 350 Body Kit that you consider buying. Your questions might include the following:

  • Is it worth buying an 2008 Lexus Es 350 Body Kit?
  • What benefits are there with buying an 2008 Lexus Es 350 Body Kit?
  • What factors deserve consideration when shopping for an effective 2008 Lexus Es 350 Body Kit?
  • Why is it crucial to invest in any 2008 Lexus Es 350 Body Kit, much less the best one?
  • Which 2008 Lexus Es 350 Body Kit are good in the current market?
  • Where can you find information like this about 2008 Lexus Es 350 Body Kit?

We’re convinced that you likely have far more questions than just these regarding 2008 Lexus Es 350 Body Kit, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for 2008 Lexus Es 350 Body Kit, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 2008 Lexus Es 350 Body Kit. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an 2008 Lexus Es 350 Body Kit buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 2008 Lexus Es 350 Body Kit currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of 2008 Lexus Es 350 Body Kit has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an 2008 Lexus Es 350 Body Kit?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your 2008 Lexus Es 350 Body Kit.
  5. Customer Ratings: Number ratings grade 2008 Lexus Es 350 Body Kit objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 2008 Lexus Es 350 Body Kit.
  7. Product Quality: You don’t always get what you pay for with an 2008 Lexus Es 350 Body Kit, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an 2008 Lexus Es 350 Body Kit is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining 2008 Lexus Es 350 Body Kit information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding 2008 Lexus Es 350 Body Kit is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: