Contents

20 Best 2014 Honda Civic Skid Plate Replacement of 2023 – Romance University

After hours researching and comparing all models on the market, Romance University finds out the Best 2014 Honda Civic Skid Plate Replacement of 2023. Check our ranking below.

2,324 Reviews Scanned

Rank No. #1

ZKFAR 14 PCS Lower Engine Cover Bolt Pin Screws, Hardware Screw and Access Clip, Car Replacement Accessories Compatible with Honda, Radiator Engine Cover Fastener Clip (Silver)

Reliable Material: The lower engine cover pin screws are made of quality material. Those screws are of stable characteristics and nice reliability. They are reliable, sturdy and durable, not easy to break or deform. They can increase the life of your car's engine.
Easy to Use: The set of engine cover screws are used for undercarriage skid plate or oil pan slid plate. They can be applied to secure the engine oil pan drain plug access cover to its mounting point. The lower engine cover bolt pin screws and clips are ideal substitute for original equipment. They can be applied for a long time.
Package Information: You will receive a total of 14 pieces. 6 engine access cover pins for replacement parts, compatible with #90674-TY2-A01, 2PCS lower cover bolts for replacement, compatible with #90105-TBA-A00 and 6 clips to help secure the skid plate to the mounting point.
Simple Installation: These screws are easy to be installed, and will not fall off after installation. It only takes a short time to complete the installation. It is suggested that you need lubricate the lower engine shield cover bolt kit before replacing old parts.
Wide Applicability: The lower engine cover bolt pin screws and clips are compatible with Honda. Note: Please check the size of your car's corresponding part model before buying to avoid an unpleasant shopping experience.

Rank No. #2

Genuine Honda 74114-TR0-A00 Front Engine Cover (Lower) Plate

Genuine OEM Part
Country of Origin : China
Package Dimensions: 48.768 L x 2.54 H x 51.308 W (centimeters)
Package Weight: 0.476 kilograms

Rank No. #3

Yonput Pack-14 Lower Engine Cover Bolt Pin Screws, Compatible with Honda, Radiator Engine Cover Fastener Clip, Hardware Screw and Access Clip, Car Replacement Accessories (Silver)

🚕 Reliable Material: This lower engine cover pin screws are made of quality material. They are reliable, sturdy and durable, not easy to break or deform. Those screws are of stable characteristics and nice reliability. They can be applied for a long time.
🚕 Easy to Use: This set of engine cover screws are used for undercarriage skid plate or oil pan slid plate. They can be applied to secure the engine oil pan drain plug access cover to its mounting point. The lower engine cover bolt pin screws and clips are ideal substitute for original equipment. It is suggested that you need lubricate the lower engine shield cover bolt kit before replacing old parts.
🚕 Package Information: You will receive a total of 14 pieces. 6 engine access cover pins for replacement parts, compatible with #90674-TY2-A01, 2PCS lower cover bolts for replacement, compatible with #90105-TBA-A00. and 6 clips to help secure the skid plate to the mounting point.
🚕 Simple Installation: You can use our products with confidence. These screws are easy to be installed, and will not fall off after installation. It only takes a short time to complete the installation. They can increase the life of your car's engine.
🚕 Wide Applicability: The lower engine cover bolt pin screws and clips are compatible with Honda. Note: Please check the size of your car's corresponding part model before buying to avoid an unpleasant shopping experience.

Rank No. #4

8Pcs Engine Lower Cover Pin Screws, 6PCS Radiator Access Cilps 90674-TY2-A01 and 2PCS Lower Engine Cover Bolt 90105-TBA-A00 Compatible with Honda Civic Accord CRV

[High Quality Material]: The Engine Access Cover Pin adopts high quality Aluminum Alloy, rust proof, corrosion resistance, not easy to break or deformation, stable performance, good reliability, durable.
[Pack list and OEM]: Package include 6 pieces of lower engine cover pin screws 90674-TY2-A01 and 2 pieces of radiator support splash guard bolts 90105-TBA-A00.
[Scope of application]: The Radiator Access Cilps and bolts are compatible with Honda Civic 2017-2020, CRV 2017-2020, Accord 2014-2020. Please check the size of the corresponding component model of your car before buying to avoid the wrong purchase.
[Lower engine shield cover bolt kit Function]:The engine cover screws are used for undercarriage skid plate or oil pan slid plate, promptly replace old or damaged screws and bolts.
[Easy to use]: Use bolts to fix the oil pan drain plug access cover to its installation point, will not easily fall off.

Rank No. #5

10 Sets Engine Splash Shield Screw Kit,T30 Engine Splash Shield Guard Undertray Cover Screws with Screw Seat and Gasket,Fit for Ford Focus Fusion Escape Explorer C-Max Transit Connect Lincoln MKC

[Package Included] The package contains 10 sets of engine splash shield screw kits to meet your daily needs.
[High Quality] T30 Torx head self-tapping screw kit is made of high-quality materials, which is firm and durable.
[Other Names of Screws] Fender pad bolts, splash shield screws, outer bracket screws, lower deflector screws, lower cover screws, bumper cover screws, cowl panel grille screws, stiffening plate screws, fender pad screws, disc screws, screws and washers - cross recesses.
[Other Names of Body Protective Nuts] Front deflector retaining nuts, side shield nuts, lower cover nuts, rear deflector nuts, deflector nuts, lower shield retaining nuts, lower body shield nuts, lower shield nuts, shield nuts, air deflector nuts, bumper cover retainers, rear deflector retainers.
[Other Names of U-nut] Reservoir nut, side reinforcement nut, lower cover nut, master cylinder nut, side support nut, front cover grille nut, lower cover nut, reinforcement plate nut, reservoir nut, side support nut, fender liner retainer, Ft fender liner nut, nut-spring.

Rank No. #6

8Pcs Engine Shield Cover Bolt Kit, 6Pcs Engine Access Cover Pins 90674-TY2-A01 and 2PCS Lower Engine Cover Bolt 90105-TBA-A00 Compatible with Honda Civic CRV Accord

[High quality]: The radiator engine access cover pin is made of high-quality Aluminum Alloy material, which is rust resistant, wear resistant, corrosion resistant, not easy to deformation and long service life.
[Compatibility]: This Engine Shield Cover Bolt Kit Fit for Honda Accord CRV Civic 2014-2021.
[Replace OEM]: Replacement #90674-TY2-A01 90674TY2A01 90105-TBA-A00,(Make sure our Engine Access Cover Pins OEM number is right for your car)
[Lower engine shield cover bolt kit Function]:The engine cover screws are used for undercarriage skid plate or oil pan slid plate, promptly replace old or damaged screws and bolts.
[Pack include]: Package include 6 pieces of lower engine cover pin screws 90674-TY2-A01 and 2 pieces of radiator support splash guard bolts 90105-TBA-A00 to meet your daily use.

Rank No. #7

Jawmoy Pack-14 Lower Engine Cover Pin Screw, Engine Splash Shield Hardware Screw and Access Clip, Compatible with Honda Accord Civic CR-V Acura 90674-TY2-A01 90105-TBA-A00 (Silver)

Packing List: The package includes 8 silver lower engine cover pins and 6 black clips. There are sufficient quantities to meet your daily needs.
High Quality Material: The engine lower cover pin is made of high-quality automobile grade steel, and the clip is also made of solid material. Each product has been tested layer by layer, and the quality is excellent.
Perfect Replacement Part: This screw can successfully replace broken engine parts and enhance the engine's working performance. These clips can help secure the skid plate to the mounting point.
Easy to Install: The bolts can be applied to secure the engine oil pan drain plug access cover to its mounting point, and just use clips to fix it.
Compatibility: The lower engine cover pin screws are compatible with Honda Accord 2014-2019, Honda Civic 2017-2019, Honda CR-V 2017-19, Acura 2014 TLX, RLX and ILX.

SaleRank No. #8

LivTee 120pcs Retainer Clips Push Type Fasteners 6.3mm 8mm 9mm 10mm Expansion Screws Replacement Kit Bumper Push Rivet Clips with Remover Tool fit for GMC Ford Toyota Honda Chrysler Acura

4 Hole sizes from 6.3mm(1/4"), 8mm(5/16" ), 9mm(23/64" ), 10mm(25/64" ). Six kinds of different push pin rivet for many brand vehicles.
High-quality nylon material: These car clips are made of high-quality black nylon material, which has anti-wear and anti-corrosion effects. This push-in cage kit will not easily break or rupture during use.
Wide range of applications: Push-in cage kits, with 12 common sizes, widely used in automotive panels, decorative panel clips, door trim clips, door panel clips, bumper clips, fender panel clips, hoods The replacement of the splash plate holder is common to most models and is fit for Ford Toyota Acura GMC Chrysler Lexus etc.
Easy to install: The product is equipped with a screwdriver, easy to operate, easy to install and remove. Small size, easy to store or carry around.
BUY WITH CONFIDENCE: Any other problem please feel free to contact us, we are always here to satisfy all of you.

Rank No. #9

35 PCS Engine Under Cover Splash Shield Guard Body Bolts, Bumper Fender Liner Push Retainer Fastener Rivet Clips, Bumper Clips Extruded U-Nuts Kit Fit for Nissan 350z 370z Infiniti G35 G37 FX35 FX45

[Quality material]: Metal rivet clips are not breakable and bumper clips are made of sturdy nylon. It is a new kind of hardware fittings for bumper splash plate bolt.
[Widely used]: Splash guard bolt under hood for replacement of trim clamps, door trim clamps, bumper clamps, bonnet and splash guard retainers.
[Compatibility]: For Infiniti G35 G37 FX35 FX45 EX35 Nissan 370Z 350Z, engine splash shield bolt hardware kit block bumper clamp rivets, direct replacement and perfect accessories, easy to install and use.
[Package includes]: 10 extruded U-nuts - replace/secure to bumper (corrosion resistant)15 body bolts with built-in fender washers (corrosion resistant) 10 nylon push clips.
[About us]: We are committed to providing car owners with high quality, convenient and useful auto parts, which is the direction we have been working hard to make customers satisfied is our goal.

Rank No. #10

14PCS Lower Engine Cover Pin Screw Kit(6 Shield Clips+6 Radiator Lower Engine Cover Bolt Pin Screws+2 Lower Cover Bolts) Compatible with Honda CRV Civic Accord Acura ILX,RLX & TLX 90674-TY2-A01

【What you get】:14-piece set, note applicable models. You will receive 6 engine access cover pins for replacement, compatible with #90674-TY2-A01,2 lower cover bolts for replacement, compatible with #90105-TBA-A00, and 6 radiator engine access cover clips for your use
【Sturdy & Durable】: These car sump skid plate fasteners are equal scale replicas of original auto parts, we use the most durable and heavy duty rust resistant aluminum that will not warp or discolor off easily, time will tell how stable and reliable it is.
【Buyer's guide】: These screw kits are specifically designed to fasten the engine access cover in its mounting points.Compatible with Honda Civic 2017 2018 2019 2020; Compatible with Honda CRV 2017 2018 2019 2020; Compatible with Honda Accord 2014 2015 2016 2017 2018 2019 2020; Compatible with Acura ILX, RLX and TLX.
【Economical and practical auto parts】:We specialise in providing professional car fastening parts for the owner or mechanic, making diy repair of cars, trucks is easier than spending a fortune on small easy to lose parts from the dealer, we are the ideal solution for you first time!
【Perfect after-sales】：Each of our fastener clips and screws are carefully tested and inspected before shipping. To protect your rights and interests, if there is a quality problem with the product, please contact customer service and our team will provide you with a return or exchange service.

Rank No. #11

Gistilli 10pcs Front Fender Liner Bolts Bumper Cover Splash Shield Mud Guard Screws Compatible with Lexus Toyota Camry Corolla Highlander RAV4 9015960498

Replacement Part Number: # 90159-60498, 9015960498
Other Names: Closing Plate Mount Bolt,Side Support Screw, Rocker Molding Bolt, Wheel Opening Molding Screw, Lower Molding Screw, Tail Lamp Assembly Screw, Housing Bolt, Bumper Cover Bolt, Protect Plate Bolt.
Widely Used: These hex head screws can be used for fender liners, air ducts, bumper hood splash guards, plastic trim and more.
Compatible with Toyota: Tacoma, Prius, Corolla, Tundra, Sequoia, 4Runner, RAV4, FJ Cruiser, Yaris, Tercel, Paseo, Highlander, Avalon, Celica, Camry etc.
Compatible with Lexus: ES300h, ES350, GS F, GS Turbo, GS200t, GS300, GS350, GS430, GS450h, GS460, IS F, IS Turbo, IS200t, IS250, IS300, IS350, LFA, LS430, LS460, LS500, LS500h, LS600hL, RC F, RC Turbo, RC200t, RC300, RC350, RX330, RX350, RX350L, RX400h, RX450h, RX450hL

SaleRank No. #12

LivTee 240pcs Car Plastic Push Pin Rivet Fasteners, Assortment Universal Retainer Clips Push Type Retainers Set in Case with Remover Tool

High-quality nylon material: These car clips are made of high-quality black nylon material, which has anti-wear and anti-corrosion effects. This push-in cage kit will not easily break or rupture during use.
Wide range of applications: Push-in cage kits, with 12 common sizes, widely used in automotive panels, decorative panel clips, door trim clips, door panel clips, bumper clips, fender panel clips, hoods The replacement of the splash plate holder is common to most models.
Save time and money: No need to go to an auto parts store to find different fasteners. Get everything you need in this box to save you time and money.
Easy to install: The product is equipped with a screwdriver, easy to operate, easy to install and remove. Twelve plastic boxes with compartments, a complete list of the size and number of items listed above. Small size, easy to store or carry around.
BUY WITH CONFIDENCE: Any other problem please feel free to contact us, we are always here to satisfy all of you.

Rank No. #13

neynavy 14 PCS Lower Engine Cover Bolt Pin Screws, Radiator Engine Access Cover Pin Radiator Pin Clips, Lower Engine Cover Bolt Radiator Access Cilps, Suitable for Honda (Silver)

🚚 Reliable Material: These lower engine cover bolt pin screws are made of high quality material, strong and sturdy, stable characteristics and nice reliability, which can be applied for a long time.
🚚 Ideal Replacement: These lower engine cover bolt pin and screws are exact match to replace your broken or missing retainers, are ideal replacement for original equipment, very suitable for a variety of automotive uses.
🚚 Package Information: You will get 6 pcs engine access cover pins for the replacement part, compatible with #90674-TY2-A01, 6 pcs clips which help secure the skid plate to the mounting point, and 2 pcs lower cover bolt for replacement, compatible with #90105-TBA-A00. Total 14 pcs.
🚚 Usage Introduction: The bolts can be applied to secure the engine oil pan drain plug access cover to its mounting point, which is easy to install, only takes a short time to complete the installation.
🚚 Application Range: The engine access cover pin and bolts are compatible with Honda. They hold on the metal cover that you removed during oil changes, durable and easy to install, increase the life of your car's engine.

Rank No. #14

ESEWALAS Brake Caliper Press Tool with 2PCS Large Plates,Car Ratcheting Brake Caliper Piston Spreader Press Tool with 360 Degree Swing Ratchet,for Single Twin Quad Sextuplet Piston Disc Brake Caliper

[High Quality Material] This brake caliper compression type car tool is made of high-quality materials, with high strength, not easy to deform, and corrosion resistance. The red rivet handle is made of rubber, which conforms to ergonomic design. It is anti-skid, comfortable to grip, and evenly applied, and will not harm hands during use. The ratchet brake piston is equipped with 2 additional steel plates.
[Working Principle] The paver can lay and push the board or retract the board (just press the switch). In extended mode, the ratchet screw located in the center generates uniform thrust towards the push plate, which can quickly push several pistons in the caliper simultaneously. Effectively saving energy and greatly improving efficiency.
[Easy to Use] Ratchet technology can achieve 360 ° full rotation, so the lifting appliance can be placed in any position. The extended directional lever can easily switch from unfolded to retracted.
[Two Sets of Push Plates] This tool is equipped with two sets of push plates: 7.01x2.36 "and 4.53x2.17". The smaller push plate is suitable for Disc brake systems with dual piston and four piston fixed calipers, or single piston and dual piston floating calipers. Larger ones are more suitable for some six cylinder piston fixed calipers. In addition, this ratchet caliper type lifting tool is designed to "push back" the piston and cannot be twisted or compressed, which is required for some brakes.
[Applicable] The stamping tool for automotive ratchet brake caliper piston hanger is easy to install and disassemble. This brake caliper press is applicable to disc brake, not drum brake. Suitable for most large trucks and commercial vehicles with four piston calipers.

SaleRank No. #15

cueclue Pack-8 Lower Engine Cover Bolt Pin Screws, Screws Bolts Splash Shield Hardware, Radiator Engine Access Cover Pin Compatible with Honda Accord Civic CRV Acura 90674-TY2-A01 (Silver)

🚔 Package Contents: The package include 6 Pack Lower Engine Cover Pin Screws and 2 Pack radiator support splash shield bolts.
🚔 High Quality Material: Made from high-quality automotive-grade steel, these engine cover pin screws and bolts have been tested. They are strong and sturdy, stable characteristics and nice reliability, which can be applied for a long time.
🚔 Ideal Replacement: These parts are perfect replacements for broken or missing retainers. The lower cover bolts can replace the part # 90674-TY2-A01.
🚔 Easy Installation: This set engine cover screws are used for undercarriage skid plate or oil pan slid plate. The bolt is used to secure the engine oil pan drain plug access cover to its mounting point. It's very easy to use.
🚔 Compatibility: The lower engine cover pin screws are compatible with Honda Accord 2014-2019, Honda Civic 2017-2019, Honda CR-V 2017-19, Acura 2014 TLX, RLX and ILX.

Rank No. #16

LivTee Rustproof License Plate Screws for Securing License Plates Frames and Covers on Cars and Trucks, 4 Sets Premium Stainless Steel Self Tapping Mounting Bolts (Black Zinc Plated)

Super Clean and Professional Look: Use the 4 included black screw covers for an even cleaner looking license plate. Maximum compatibility, enjoy noise-free license plates.
What You Get: Premium stainless steel screws--4pcs, foam pad--4pcs, screw washers--4pcs, screw covers--4pcs, nylon screw inserts(OPTIONAL)--4pcs.
Easy Installation: Easy installation with simple screwdriver. No rattle, tighten with foam pad, keep your license away from vibration noise during driving.
In Standard Size: 1/4-3/4" with 3/8" steel and black zinc plated for a durable finish that is guaranteed to never tarnish, which fits most domestic cars and trucks.
Enjoy Warranty: You will get quality products, if you have any questions, please contact us, we are always waiting for you here.

Rank No. #17

Front Center Lower Undercar Engine Splash Shield - Compatible with 2013-2015 Honda Civic Natural Gas

Front Engine Cover Plate
Compatible with or fits: 2013 - 2015 Honda Civic Natural Gas
Direct Replacement
Package Contents: (1) Splash Shield; (13) Mounting Clips
Review Description For Proper Fit

Rank No. #18

Car Dashboard Cell Phone Holder, Anti-Slip Pad Double-Groove with Number Plate Auto Silicon Tray, Silicone Car Pad Mat for Various Dashboards,Phone GPS Keychains Sunglasses Mat

【Practical Design】Car Dashboard Cell Phone Holder Anti-Slip Pad，product is non-toxic, pollution-free, the glue will not fall off, will not dirty your hands, and will not dirty the surface of objects,Small size and large capacity can meet your daily dashboard organization needs.
【Easy To Use】Our Car Dashboard Cell Phone Holder Anti-Slip Pad, are washable and reusable, you just need to wash or wipe with water, convenient Save surfaces clean and renew pads.
【Non-slip】The raised interface design on the surface is not only beautiful, but also firmly fixes the items, and does not fall off when bumped,you can put your phone, perfume, cigarettes, pens, coins, glasses, to store your items and prevent them from shaking and falling.
【High Quality】In-car accessories phone holder is made of high-quality eco-friendly PVC, more eco-friendly, soft feel and delicate texture design,Soft and non-deformation resistant to high and low temperature,allowing you to wash and reuse it.
【Application】 Anti-slip mats can be universally applied anywhere on your car/truck/RV dashboard,It can also be used as an organizer at home or in the office.if you have any question, please get in touch with us, we are always here to satisfy all of you.

Rank No. #19

20 Pcs Hex Head Sems Screw, Replace OEM#: 07-14-7-129-160, for BMW Fender Liner Splash Shield Engine Under Cover Bumper Cover Tapping Screw 328i E46 330i E90 530i E60 745Li E66 X1 X3 E83 X5 E70

SIze: Top head diameter 7.8mm, stem length 14mm, bottom head diameter 15mm, Fits hole diameter 4.8mm. Please check the hole diameter carefully to find the one you need before purchasing.
Vehicle Fitment: Compatible with BMW 128i (2008-2014)/BMW 135i (2008-2014)/ BMW 228i (2014-2016)/ BMW 228iX (2015-2016)/ BMW 230i (2017-2021)/ BMW 230iX (2017-2021)/ BMW 320iX (2013-2019)/ BMW Ci (1999-2000)/ BMW 325Ci (2001-2006)/ BMW 325i (2001-2006)/ BMW 325xi (2001-2006).
E-Coared Layer: Made of steel with black zinc plated, with E-coated layer and polished, it's anti-rust and more durable.
Widely Use: Can be used in different places on the vehicle, including bumpers, splash guards, guards, engine guards, transmission guards, under car panels.
Package: 20pcs car clips complete your accessories stock, don't use every day, but when you need them, it's handy to have good clips on hand, OEM#: 07-14-7-129-160.

SaleRank No. #20

Anti Theft License Plate Screws Kits- Rustproof Stainless Steel Car Tag Plate Mounting Hardware, M6 (1/4") Tamper Proof Screws, Fastener Nut, Caps Cover for Front Rear Frame Holder Mounting

Anti Theft License Plate Screws: These security screws use a unique tamper-proof design- the top of the Pan Head screw is designed with a hexagonal button head with a thimble in the center. Which cannot be installed or disassembled by an Allen wrench. You need to use the anti-theft screwdriver provided by us to keep your License plate theft proof.
High quality stainless steel license plate screw set: Rustproof Car Number Plate Screws are made from Premium 100% 304 stainless steel, heavy-duty, sturdy and durable, corrosion-resistant, rust-resistant and weather-resistant.
Compatibility: License plate screw kit which we provide include, screws bolts, fastener nuts, screwdriver, caps and washers.1/4"X3/4"(M6*20MM) long screws are suitable for the combined mount of tag plate, frame, and cover of most motorcycles, cars, trailers, and trucks. Self-tapping screws fit most domestic Cars & Trucks License Plate Holes that use Nylon/Plastic Retainer. We provide nylon plug- ins to adjust the size of the bumper pre-drilled holes.
Rattle Proof License Plate:The black license plate rattle proof pad with adhesive backing is used on the back of the metal plate, reduce the vibration noise of the plate, and avoid the car license from scratching the paint of the car.
After sales: if you have any questions, please let us know in time, we will reply you and solve the problem for you within 24 hours. If you are not satisfied with our product, we will refund you unconditionally or replace it with a new one.

Last update on 2023-08-20 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best 2014 Honda Civic Skid Plate Replacement?

Do you get stressed out thinking about shopping for a great 2014 Honda Civic Skid Plate Replacement? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 2014 Honda Civic Skid Plate Replacement, which is why we have assembled a comprehensive list of the greatest 2014 Honda Civic Skid Plate Replacement available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 2014 Honda Civic Skid Plate Replacement that you consider buying. Your questions might include the following:

Is it worth buying an 2014 Honda Civic Skid Plate Replacement?
What benefits are there with buying an 2014 Honda Civic Skid Plate Replacement?
What factors deserve consideration when shopping for an effective 2014 Honda Civic Skid Plate Replacement?
Why is it crucial to invest in any 2014 Honda Civic Skid Plate Replacement, much less the best one?
Which 2014 Honda Civic Skid Plate Replacement are good in the current market?
Where can you find information like this about 2014 Honda Civic Skid Plate Replacement?

We’re convinced that you likely have far more questions than just these regarding 2014 Honda Civic Skid Plate Replacement, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for 2014 Honda Civic Skid Plate Replacement, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 2014 Honda Civic Skid Plate Replacement. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an 2014 Honda Civic Skid Plate Replacement buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 2014 Honda Civic Skid Plate Replacement currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of 2014 Honda Civic Skid Plate Replacement has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an 2014 Honda Civic Skid Plate Replacement?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your 2014 Honda Civic Skid Plate Replacement.
Customer Ratings: Number ratings grade 2014 Honda Civic Skid Plate Replacement objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 2014 Honda Civic Skid Plate Replacement.
Product Quality: You don’t always get what you pay for with an 2014 Honda Civic Skid Plate Replacement, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an 2014 Honda Civic Skid Plate Replacement is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining 2014 Honda Civic Skid Plate Replacement information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding 2014 Honda Civic Skid Plate Replacement is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: How much is the skid plate on a Honda Civic?

A: The problem is that the SKID Plate that gets removed, and incorrectly replaced by the Dealer, so it has issues, is just a part of the (#6) $379 assembly. !! The actual skid plate (I colored light brown in picture below) is just a thin aluminum Press Formed plate. worth about $25 !! It is held onto the main assembly (#6) by 1/4 turn screw (#26)

Q: Can a 2015 Honda Civic fit a cover plate?

A: Fits as expected, on a 2015 Honda Civic. As others have stated, it would have been great to have the mounting screws included, because a Valvoline oil change subsequently resulted in two missing screws and the need to replace this cover plate. This fit my 2015 Honda Civic EX Sedan perfectly, thank you!

Q: Do you get free shipping on a Honda skid plate?

A: Receive free standard shipping on orders over $35 to addresses in the continental United States. Free battery installation & charging, check engine light scanning, starting system testing, & more! At Advance Auto, we carry 1 different types of Skid Plate products for your Honda at competitive prices to fit your budget.

Q: Do you have to customize a Honda engine cover?

A: No “customization” (reaming out bolt holes, no drilling new holes, that kind of thing, that you sometimes have to do with some replacement parts) needed. Highly recommended. Only complaint, if I had one, is these engine cover plates are not very sturdy. I guess that is just they way they are made, as the original/OEM cover was just a flimsy.