The Best 360Mm Radiator of 2023 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best 360Mm Radiator of 2023. Check our ranking below.
2,758 Reviews Scanned
- Dual 120mm fan mounts on either side of the radiator are ready for your most ambitious custom Liquid Cooling build.
- 30mm radiator thickness delivers extreme cooling performance with high-airflow and low-noise fans.
- A premium COPPER radiator core and 25 micron thick cooling fins provide a high thermal transfer rate optimized for CORSAIR's performance copper water blocks.
- High-quality matte Black polyurethane coating delivers a flawless finish to match your system.
- Integrated fan screw guides make it easy to install fans even when the radiator is fitted into a case.
- Extreme Performance Liquid Cooling: Triple 120mm fan mounts on either side are ready for your most ambitious custom liquid cooling build.
- High Surface Area: 54mm Radiator thickness delivers extreme cooling performance with high-airflow and low-noise fans.
- Premium Copper Construction: A premium copper radiator core and 25 micron thick cooling fins provide a high thermal transfer rate optimized for CORSAIR’s performance copper water blocks
- High-Quality Polyurethane Coating: A flawless finish to match your system
- Integrated Fan Screw Guides: Makes mounting your fans to the radiator a breeze.
- With a thickness of 44mm, the eK-Quantum P Series Surface radiators are the absolute all-rounders for low noise and high performance across the entire fan operational range
- equipped with a total of five G1/4" threaded connection ports
- A total of sixteen 2mm-wide copper tubes across the entire radiator length assure optimal coolant flow, putting no stress on your cooling loop
- High-grade non-louvered copper fins with 18 FPI density provide the best balance between thermal transfer and air resistance.
- To maximize cooling performance, a Push/Pull setup can be utilized on any P Series eK-Quantum Surface radiator.
- More Rows for More Cooling: Built to perform, this 64mm thick radiator offers a triple-row flat tube design and brass tank for best thermal capacity
- High-Density Copper Fin Design: Designed to accommodate high air volume (Fin per Inch: 14)
- Stainless Steel Frame: Engineered with stainless steel side panels that increase the durability and strength of the radiator while reducing the weight
- Optimized Heat Transfer: Optimized for efficiently pulling heat away from cycling coolant thus achieving maximum heat dissipation at both low and high airflow operation
- High-Quality Manufacturing Process: Baked through a controlled atmosphere soldering line. Materials melt into each other to accomplish optimal thermal transfer from the tubes to the actual fins
- Luminescent ARGB Light: Signature cooling performance with an enhance ARGB (3-Pin) light dispersion on the pump and fans gives everyone the versatility for a fully customizable lighting.
- New Blade Design: New optimized PWM curve blade design for improve airflow and air pressure. Enhanced frame structure, reducing turbulent flow and noise.
- Dual Chamber 3RD Gen Pump: 3rd Generation dual chamber pump designed for better performance and overall efficiency.
- Luminescent Fan Blades: The refreshed frosted blades enhance the ARGB (3-Pin) light dispersion for a more vibrant and luminescent effect that is fully customizable.
- Industrial Grade Seal: Superior Industrial Grade EPDM material for improved seal strength, longevity, and anti-leaking prevention. AMD AM5/AM4/AM3+/AM3/AM2+/AM2/FM2+, Intel LGA1700/1200/115X/1366/2066/2011-v3/2011
- Extreme Cooling Performance: Experience exceptional cooling performance with a 28mm/11-inch liquid radiator designed for high-airflow and low-noise fans. Keep your system running smoothly and efficiently, even during the most ambitious custom Liquid Cooling builds.
- Durable Construction: Engineered with copper fins and a brass water chamber, this radiator is built to last, ensuring both durability and strength without adding unnecessary weight to your setup.
- Optimized Heat Transfer: Achieve maximum heat dissipation at all airflow levels. Our radiator is meticulously optimized to efficiently draw heat away from your cycling coolant, maintaining CPU stability and smoothness.
- Thermal Efficiency: The 360mm radiator features black oxidation paint, enhancing both aesthetics and thermal efficiency.
- Custom Liquid Cooling: Perfect for ambitious builds, with 14 tube mounts for a professional, high-performance cooling solution.
- Overall Dimensions: 395mm x 121mm x 28mm. Fits 3 standard 120mm fans. Slim profile enables fitting the radiator in tight places and achieves low air flow resistance
- 20 FPI Copper Fin design provides maximum thermal conductivity and a high heat transfer surface area for optimum heat flow
- High flow, low pressure drop design consists of 14 tubes in a parallel, dual pass flow arrangement, rated for 1 bar (14 psi) of pressure
- G1/4” threaded ports for compatibility with most popular fittings
- 12 M3 x 30mm screws are provided for mounting standard 120mm x 25mm fans, such as Shott Tech FAN1225. 12 M3 x 5mm screws are provided for mounting the radiator to a computer case or chassis
- Advanced All-in-One CPU Cooling: Offers everything needed to keep your latest Intel or AMD CPU running at peak performance, while curbing the heat of even high-end processors.
- Refined Pump Head Design and 16 RGB LEDs: Contemporary pump head design, with 16 individually addressable diffused RGB LEDs, provides a unique look and stunning lighting effects.
- Cutting-Edge Cooling Performance: Elevate your CPU performance with liquid cooling driven by three 120mm CORSAIR AF ELITE Series AirGuide fans, delivering powerful PWM-controlled airflow between 450 and 1,850 RPM.
- Unite Your Setup: Powerful CORSAIR iCUE software enables you to control and synchronize your cooler’s RGB lighting with all iCUE compatible devices, monitor CPU and coolant temperatures, and adjust fan and pump speeds.
- Specialized Cooling Modes for Quiet Operation: Zero RPM fan and Variable Pump Speed specialized cooling modes in iCUE keep noise to a minimum when your system is idle or under light loads.
- PrimoChill Premium Slim PC Water Cooling Radiator available in 20+ colors for the perfect custom look in watercooling the 30mm thickness is perfect for any system install, large or small
- Powdercoated in the USA by our team to bring you the best possible finish in the most colors available in any watercooling radiator on the market today
- Premium high performance slim water cooling radiator with high density tube/fin ratio for extreme heat dissipation as well as 7x dual pass coolant tubes optimized fin layout for low RPM fans
- Radiator includes all mounting hardware for and logo badge to be applied once radiator is install so the logo is in the correcty position. Once again PrimoChill going the extra mile to make your custom watercooling loop perfect
- Radiator Specifications: Dimensions 395 x 120 x 40mm (L x W x H), 2 G 1/4 Ports (1 in 1 out), ALL COPPER constructed fins and coolant tubes for maximum coolant per square inch
- 12 Tubes - This PC heat exchanger is designed with 12 tubes to speed up the water flow and achieve faster cooling, thus ensuring stable and smooth CPU operation.
- Water Separator - This cooler features a built-in water separator to keep the water mixed and keep them away from your device for safe operation.
- WIDE COMPATIBILITY - The water cooling tubes are widely used for computer water cooling systems, beauty equipment, industrial equipment, and more.
- Durable - The red copper fins and brass tank can withstand continuous and prolonged heat dissipation to keep your equipment running efficiently and for a long time.
- Easy Installation - This computer water cooling tube can be easily and conveniently installed with screws, no need to hire a special installer, it is the cost-effective choice for your DIY computer.
- Made of aluminum,very sturdy
- Matte Black Painted Frame,Core
- The connector outer diameter is 9.5 mm,Can Installed 3* 120x120mm fan
- Suitable for water-cooled computer CPU, industrial variable frequency drives, the laser head cooling, air conditioning evaporator and industrial control cabinet cooling
- Product Type:
- Technical Details:
- Dimensions:
- Scope of Delivery:
- Compatibility:
- Addressable RGB Fans & Pump: The Addressabe RGB lighting on the fans and pump can sync with motherboard via 5V 3pin interface, provide even and rich illumination.
- Three PWM Fans: The speed of three PWM fans can be auto adjusted according to CPU temperature, provide the better airflow and lower noise. (Note: The PWM mode must be set in BOIS before liquid cooler operation, otherwise the fan will run with fastest speed or lowest speed)
- Better Cooling Performance: With a more efficient cold plate, spraying copper bottom, proprietary pump and fans optimized for static pressure to make sure the excellent heat transfer from cpu.
- Controller Included: The controller included in the accessory bag, you can achieve ARGB sync and PWM with it. Max. Air Flow: 52CFM; Noise Level: 30.8dB(A), Fan Speed: 800-1800 RPM.
- Wide Compatibility: Intel LGA 1700/1200/2066/2011-3/2011/1156/1155/1151/1150, AMD AM5/AM4/AM3+/AM2+/FM2+/FM2. (Note: No AMD backplate in the package, the AMD socket must be installed with the original bracket of motherboard)
- ★ Product Name: Water Cooling Radiator; Outer Size: 395 x 120 x 30mm / 15.5'' x 4.72'' x 1.18''(L*W*H), Weight: 910g.
- ★ Fan Installation Size: 120 x 120 x 3; Fitting Thread: G1/4 Inch; Tube Quantity: 12; Rated Voltage: DC12V.
- ★ Efficiently pulling heat away from cycling coolant thus achieving maximum heat dissipation at both low and high airflow operation.
- ★ Made of pure copper fins with good heat dissipation, Using the black oxidation paint to increase the thermal efficiency.
- ★ Applicable to computer CPU, industrial variable frequency drives, VGA water cooling ,laser head cooling, and air conditioning evaporator.
- ROTATABLE BLOCKHEAD - Features a 270° rotatable water block with MSI logo in ARGB as well as Addressable RGB fans for multiple lighting effects.
- SPLIT-FLOW RADIATOR WITH INTEGRATED PUMP - The aluminium radiator features a unique split-flow water cooling system with an integrated three-phase pump for superior durability and motor resonance reduction.
- TRIPLE ARGB FANS - 3x 120mm ARGB PWM fans provide excellent pressure and air flow while generating very little noise.
- EVAPORATION-PROOF TUBING - 400mm water cooling tubes comprised of triple-layered netted plastic concealed beneath reinforced mesh sheathing to ensure that water stays inside the closed-loop system at all times.
- AMD & INTEL SOCKET COMPATIBLE - An easy-to-install mounting bracket fits AMD (AM5, AM4, FM2+, FM2, FM1, AM3+, AM3, AM2+, AM2) and Intel (LGA 1150, 1151, 1155, 1156, 1700,1200, 1366, 2011, 2011-3, 2066) CPU sockets; Thermal paste included
- Material: copper fin + copper water chamber + copper guard plate (T2 copper)
- Hole position: G1/4*2;Pressure test: 1bar;Compatible fan: 12cm*12cm*2.5cm fan
- Number of pipes: double round tubes, 6 tubes per layer;Fin density: one inch = 18.5 strips;Fin thickness 0.11mm
- Channel specification: 7mm*0.28mm*6pcs (inner diameter of copper pipe is more than 6mm, increase the passage of water flow and impurities in the liquid)
- Packing list: Copper radiator * 1pcs & Mounting screw * 1set
- 360mm radiator
- Solid copper - the best performance at the highest level
- Connections 5x G1/4"
- Fins per Inch 12
- WxDxH 395 x 124 x 30 mm
- 360mm radiator
- Solid copper - the best performance at the highest level
- Connections 2x G1/4"
- Fins per Inch: 15
- LxWxH: 393 x 120 x 25.5 mm
- Product Name : Aluminum Heat Exchanger Radiator
- Dimensions : 390*121*32mm
- Core body size: 354*120*16mm
- Installation dimensions:105*105mm
- Water inlet/outlet: ∅ 10mm
Last update on 2023-07-29 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API
How Do You Buy The Best 360Mm Radiator?
Do you get stressed out thinking about shopping for a great 360Mm Radiator? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 360Mm Radiator, which is why we have assembled a comprehensive list of the greatest 360Mm Radiator available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 360Mm Radiator that you consider buying. Your questions might include the following:
- Is it worth buying an 360Mm Radiator?
- What benefits are there with buying an 360Mm Radiator?
- What factors deserve consideration when shopping for an effective 360Mm Radiator?
- Why is it crucial to invest in any 360Mm Radiator, much less the best one?
- Which 360Mm Radiator are good in the current market?
- Where can you find information like this about 360Mm Radiator?
We’re convinced that you likely have far more questions than just these regarding 360Mm Radiator, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for 360Mm Radiator, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 360Mm Radiator. Make sure that you are only using trustworthy and credible websites and sources.
We provide an 360Mm Radiator buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 360Mm Radiator currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of 360Mm Radiator has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an 360Mm Radiator?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your 360Mm Radiator.
- Customer Ratings: Number ratings grade 360Mm Radiator objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 360Mm Radiator.
- Product Quality: You don’t always get what you pay for with an 360Mm Radiator, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an 360Mm Radiator is should be an indication of how long it will work out for you.
We always remember that maintaining 360Mm Radiator information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding 360Mm Radiator is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.