Contents

20 Best 3D Printer Board of 2023 – Romance University

After hours researching and comparing all models on the market, Romance University finds out the Best 3D Printer Board of 2023. Check our ranking below.

2,490 Reviews Scanned

SaleRank No. #1

Makerbase MKS Robin Nano V3 32 Bit Control Board 3.5inch TS35 Touch Screen for Creality Ender 3 V2 Pro 3D Printer Mainboard Replacement Parts Marlin 2.x Klipper with 5pcs TMC2209 WiFi Module

WIDE RANGE OF APPLICATION: Makerbase 3d printers mainboad Robin Nano can used on Creality 3D printer ender-3, ender-3 v2, and ender-3 pro, with the color screen 3.5inch which is the great update version for FDM 3d printer for homeuse.
MORE POWERFUL PROCESSING CAPABILITIES: Makerbase 3d printer MKS Robin Nano V3.1 is an upgraded version of Robin Nano V2.0 and V3.0, change the MCU from the STM32F407VGT6 to STM32F407VET6. What is more, Robin Nano V3.1 improves the anti-interference performance, such as adding Schottky diodes to the temperature measurement circuit and MOS circuit, and adding TVS protection to the power input.
DIVERSIFICATION OF FUNCTIONS: This Creality ender 3d printer update tool kit also have the 3.5inch touch screen, which is the color display version TS35 very easy to use.
EXTENSIVE MATCHING WITH DISPLAY: Makerbase MKS Robin Nano V3.1 can work with TS35 touch screen display and also can work with MKS H43 LCD MINI12864 LCD2004, which can show showing RGB multi-color backlight with various color lights support knob to directly adjust settings
BETTER FIRMWARE OPTIONS: The same as the Robin Nano V2.0, firmare of MKS Robin Nano V3.1 is also based on Marlin 2.X. Actually, we directly use the sae respository. Just modify the type of motherboard to compile the related firmware.

Rank No. #2

Official Creality 3D Printer Ender 3 Upgraded Silent Board Motherboard V4.2.7 with TMC2225 Driver Marlin 2.0.1 for Ender 3/ Ender 3 V2/ Ender 3 Pro/Ender 3 Max/Ender 3 Neo/3 V2 Neo/3 Max Neo

【Super Quiet】The silent mainboard can reduce stepper motor noise. TMC ultra-quiet motor drive chip, ultra-quiet system design, so that the machine is always running at low decibels (<50dB).
【Widely Application】Compatible with Creality Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 MAX, Ender 3 Neo,Ender 3 V2 Neo/Ender 3 Max Neo 3D printers. PLEASE NOTICE: It only plug and play for Ender-3. If you want to install it on other machine, please flash the relative machine V4.2.7 firmware. You can download firmware from official website.
【Driver】TMC2225 driver & V0.0.6 firmware from Creality ( based on Marlin 2.0.1) for V4.2.7 board. The bootloader has been preinstalled.
【Update Firmware Method】Please copy the correct firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process.
【After Sale Service】Any issues or questions about our product please feel free to contact us at any time. We have professional technical Team to provide technical supports for you within 24 hours.

Rank No. #3

BIGTREETECH Octopus V1.1 Control Board 32bit Silent Board Compatible TMC2209, TMC2240, TMC2208, TMC5160 Stepper Driver, Support DIY Klipper and Raspberry-Pi Online Printing for Voron 3D Printer

【Main Control Chip】Uses a 32-bit ARM Cortex-M4 series STM32F446ZET6 main control chip with a core frequency of 180MHz.
【Strong DIY Support】This motherboard supports up to 8 stepper drivers with 9 stepper driver outputs in total; And up to 6 PWM fans and 2 always-on fans with the ability to individually select the voltage rail that will drive each fan. Select from Vin, 12V or 5V.
【Realize Online Printing】Interfaces with a Raspberry Pi using emulated serial over USB or direct UART to any of the serial ports on the board, to realize Klipper Firmware and Raspberry Pi Online Printing.
【Motherboard Expansion Function】Support BLTouch, locked-rotor detection, shutdown after printing, resume printing after power failure, CAN bus, U disk function, IIC expansion; at the same time reserved WIFI interface, PT100 thermistor interface (optional, Only reserved interfaces, customers need to purchase chip welding, please pay attention.), dual Z-axis printer.
【Increase Protection Function】Uses high-performance MOSFETs to increase heating efficiency while also reducing heat generation on the motherboard. Supports “print from SD card” and “print via USB OTG” using the integrated USB-A port.

Rank No. #4

BIGTREETECH SKR Pico V1.0 Controller Board Perfectly Compatible with Voron V0.1 3D Printer, Fits for Raspberry-Pi Using Klipper Firmware, Entry-Level 4-axis DIY Motherboard

✨Using Raspberry-Pi ARM Cortex-M0+ main control RP2040 microprocessor. This controller board onboard UART mode of TMC2209 and supports Klipper firmware.
✨BIGTREETECH SKR Pico V1.0 main control board heat sink design is newly upgraded, the heat dissipation area is enlarged, and the heat dissipation performance is greatly improved, which is both beautiful and practical.
✨Chip capacitors (MLCC) of the main control board are all Murata capacitors; well-known brand capacitors, with guaranteed quality and better experience.
✨Fuse adopts the form of "fuse holder + fuse", which is easy to disassemble; the lateral design of the main control board seat perfectly matches the space characteristics of Voron V0 machine that needs to fix the main board vertically.
✨ID design is newly upgraded. It adopts the Raspberry-Pi board frame, which is perfectly installation with Rasberry-Pi to save internal space. The appearance and performance coexist. It is the coolest choice for Voron players.

SaleRank No. #5

BIGTREETECH SKR PICO V1.0 Control Board: Mini Controller Board with TMC2209 UART Stepper Motor and Raspberry Pi Online Printing for Voron V0 V0.1 3D Printer Parts

💝【Brand-new Version for Voron V0& V0.1】Featured with Raspberry Pi ARM Cortex- Mo+ MCU PR2040, Bigtreetech SKR Pico V1.0 upgraded on ID design, which coexists of stylish appearance and excellent performances, ideal choice for Voron players.The fuse kit consists of fuse and holder,which enables easy disassembling and installation. Type-C interface allows for main control communication.
💝【Perfectly match With Raspberry Pi】With Raspberry Pi board frame, Raspberry Pi can be perfectly installed on BTT SKR Pico V1.0, saving internal spaces. The unique lateral design of SKR Pico‘s seat perfectly matches the space characteristics of the Voron V0 and V0.1 machine that needs to be fixed to the motherboard longitudinally.
💝【Mute Printing & Premium Capacitors】Featured with TMC2209 mute driver UART mode, SKR PICO V1.0 supports mute 3D printing. The main version of the chip capacitor (MLCC) adopts high-quality Murata capacitors to enhance product's quality.
💝【Upgraded Heat Dissipation】Upgrade the design of the heat sink and increase the heat dissipation area. Increased controllable fan enables to lower the temperature of the whole machine when the it's working, effectively solving problems related to heat dissipation, and improving on the heat dissipation.
💝【Satisfying After-Sales Supports】Any issues or questions about BTT SKR Pico V1.0, please feel free to contact us any time on Amazon. Our professional technical team're willing to provide you with immediate technical supports as soon as we can.

SaleRank No. #6

Makerbase MKS Mainboad Monster8 V2 32Bit Control Board 8 Axes for V2.4 Voron VS Spider Octopus 3D Printer Compatible TMC2209 Support Marlin 2.0.x Klipper U Disk TMC Driver UART Mode LCD12864 MKS TFT35

MORE FUN WITH STRONG DIY SUPPORT: Makerbase MKS monster 8 for voron large 3d printers have 8 stepper drivers and 9 motor interface(Driver0,1,2-1,2-2,3,4,5,6,7) which support multiple motor drives such as A4988, DRV8825, LV8729, TMC2208, TMC2209, TMC2225, TMC2226, gives more flexible DIY upgrade capability. You can replace the motor drive by yourself. The Monster8 mainborad can be used on Voron 2.4 Creality Ender-3 Ender-3 V2 and Ender-3 pro, please update the firmware on Github first.
MARLIN AND KLIPPER FIRMWARE SUPPORT: Makerbase MKS monster8 3d printer motherboad support marlin 2.0.x and klipper, requires a Klipper host such as Raspberry Pi or MKS PI
FLEXIBLE MATCHING FOR DIVERSITY: EXP1 and EXP2 for Makerbase MKS control board supported a wide variety of lcd display such as LCD2004, LCD12864, MKS MINI12864 V1.0, MKS MINI12864 V3.0, and also works for Makerbase touch screen including MKS TFT24, MKS TFT28, MKS TFT32, MKS TFT35, MKS H43
MOTHERBOARD EXPANSION FUNCTION: 6 endstop support power select(X-,X+,Y-,Y+,Z-,Z+) and 3D TOUCH(PA8) interface, support DFU mode set by button(Boot0), Support driver power select(5V or 3.3V), Support TMC UART and SPI mode, SENSORLESS_HOMING function(Diag0-5,connect to X-,Y-,Z-,X+,Y+,Z+) and also Integrated SPI communication micro sd card and reserved SPI signal UDISK and virtual USB device.
MCU is STM32F407VET6, 168MHz, 512K flash, 192KB RAM, Built-in CAN transceiver and interface(connect to CAN)

Rank No. #7

BIGTREETECH Octopus V1.1 32bit Control Board + TFT35 E3 V3.0.1 Touch Screen Display + 8xTMC2209 V1.3 Stepper Motor Driver DIY for Voron V2.4 3D Printer Controller Board Support Klipper Raspberry Pi

⭐SUPER PERFORMANCE CHIP: BIGTREETECH Octopus control adopts 32-bit ARM-level Cortex-M4 series STM32F446ZET6 chip with a frequency of up to 180MHz, and supports 8 stepper motors. Equipped with highly modular open source firmware Marlin2.0, which greatly improves the overall performance of the motherboard, and all the functions of the motherboard do not require any expansion modules, and supports running Klipper and Marlin firmware
⭐SUPER MULTI-FUNCTION CONTROL PANEL: Support material interruption detection, continuous printing after power failure, shutdown after printing, BL_Touch, support online printing, etc. Upgrading the configuration firmware through the SD card, the operation is simple, convenient and efficient. Using high-performance MOSFET, the heat dissipation effect is better.
⭐MULTI-FUNCTION DISPLAY: TFT35 E3 V3.0.1 touch screen has higher compatibility. You can choose two working modes: UART serial screen mode and 12864 screen mode. The WIFI port is reserved, and the WIFI function is implemented by an external WIFI module.SD card update firmware is simple and convenient, download from our github, copy and save to SD card
⭐ULTRA-QUIET DRIVER: TMC2209 v1.3 with SpreadCycle technology, enables high precision cycle-by-cycle current control for the highest dynamic motion. Large area thermal pad to reduce the temperature of the drive during operation. The motor is difficult to lose step. Can prevent motor vibration. The module supports STEP/DIR and UART modes.
⭐WORRY-FREE AFTER-SALES SERVICE: Do you have any questions? Or if you have any problems that need to be solved, please feel free to contact us, and we will arrange the most professional technical team to solve it for you until you are satisfied.

Rank No. #8

BIGTREETECH SKR V1.4 Control Board 32bit Upgrade SKR V1.3 Motherboard, Compatible TFT35/TFT35 E3/TFT70 Touch Screen Mini12864 LCD Support TMC2209/EZ2209/TMC2208/TMC5160 for Most FDM 3D Printer

⭐Using 32-bit 100MHz ARM-class Cortex-M3 series LPC1768 main control chip, the performance is greatly improved.
⭐Equipped with highly modular open source firmware Marlin 2.0, which is convenient for users to DIY and secondary development.
⭐Support 2.4, 2.8, 3.5-inch color touch screen, support LCD2004 screen, LCD12864 screen; Upgrade configuration firmware through SD card, simple, convenient and efficient operation.
⭐It can supply power to TFT screen, BLtouch, Neo-pixel by plugging in an external DC5V power module; in addition, I2C, SPI, WIFI interface is reserved to facilitate customer DIY.
⭐On-board TMC driver SPI working mode and UART working mode, and the on-board DIAG function pins are convenient for customers to use, eliminating the complicated wiring process, which can be used by simply removing and inserting the jumper cap; Functions such as continuous power on, material detection, shutdown after power off.

Rank No. #9

BIGTREETECH SKR 3 EZ Control Board 32bit New Upgrade Silent Board Support EZ2209/ EZ5160/ EZ2130 Stepper Driver Compatible TFT Series Touch Screen, DIY for BIQU B1/Ender 3/ Ender 5/ CR10 3D Printer

✨Using 32-bit ARM Cortex-M7 series STM32H743VI main control chip with a main frequency of 480MHz, the performance has greatly improved.
✨The motor power supply supports up to 48V, and for the larger voltage when using TMC5160 and EZ5160, an isolation chip is used to protect the mainboard from burning IO.
✨SKR 3 EZ 3D Control Board adopts two kinds of driver sockets, which are compatible with both BIGTREETECH EZ series driver modules and TMC series driver modules.
✨The power chip adopts TPS5450-5A, which supports DC12/24V power input. The output current of the chip is up to 5A, and the peak value can reach 6A, which perfectly supports the power supply of Raspberry Pi.
✨The numerical control fan realizes 24V, 12V, 5V voltage selection through the external power supply module, eliminating the need for the operation of the customer's external transformer module, thereby reducing the probability of damage to the motherboard.

Rank No. #10

BIGTREETECH SKR Mini E3 V3.0 Control Board Integrated TMC2209 UART Stepper Driver Supports Marlin/Klipper Compatible Ender 3/Ender 3 Pro/Ender 3 V2 3D Printer Motherboard ZZB000590 Black

⭐【Main Control Chip】BIGTREETECH SKR Mini E3 V3.0 control board adoptes the G0 series MCU-STM32G0B1RET6 or STM32G0B0RET6 ARM Coretex. integrated TMC2209 Silent stepper motor drive,Support runing Klipper&Marlin.
⭐【Heat Sink Design Upgrade】New upgraded to integrated large stepping motor driver aluminum heat sink,strengthen the drive heat dissipation capacity, and greatly improve the motherboardc heat dissipation performance.
⭐【Multiple Functions】It Supports BLTouch,MicroProbe, RGB lights,Filament detection, Automatic shutdown,power-off reesume, Display supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28/TFT43/TFT50/TFT70 V3.0 touch screen as well as original 12864 LCD of Ender 3 printer.
⭐【Fan Upgraded】Increase Three CNC heat dissipation controllable fan interface to reduce the printer temperature when the device is working.
⭐【Multiple Compatibile】BIGTREETECH SKR MINI E3 V3.0 Control board is design for Ender 3,plug and play,compatible with Ender V2 Ender 3/ende 3 pro/ender 5/ender 5 pro 3D printer, the firmware is pre-install well before we ship out, you can select the firmware base on your needs.

Rank No. #11

BIGTREETECH SKR Mini E3 V3.0 32Bit Silent Control Board for Ender 3, Ender 3 V2.0,Ender3 Pro, Ender 3 S1 3D Printer with TMC2209 UART Stepper Driver,Support Marlin/Klipper,Compatible with BL Touch

【✅Main control chip upgrade 】SKR MINI E3 V3.0 main control chip upgrade Adopts STMicroelectronics G0 series MCU STM32G0B1RET6,the instructions will be sent to the 3D printer faster and more accurately.
【✅Improved cooling effect】Upgraded heat sink improves heat dissipation,trengthen the drive heat dissipation capacity;Thermistor inputs are protected from short circuit to Vin;Added a third PWM controlled cooling fan output,It can better protect the circuit board and prolong the life of the motherboard.
【✅Upgraded MiniUSB interface】The PC communication USB interface is upgraded from Mini USB to Micro USB B, which is more adaptable.
【✅Multiple functioning】Support BLtouch, RGB lights,filament detection, power-off resume, automatic shutdown, etc .Compatible with Creality Ender 3/Ender 3 V2/Ender 3 pro/Ender 5/Ender 5 pro/CR-10 3D printers
【❤️Serious service】We will provide a long-term warranty service of up to 12months,Strict testing for all components before delivery. If you encounter any problems when printing, please feel free to contact us, please give us a chance to solve the problem for you.

Rank No. #12

BIGTREETECH SKR Pro v1.2 32bit Control Board high-Frequency 3D Printer Motherboard, Support TMC5160, TMC2208, TMC2130, TFT28, TFT32, TFT35, 12864LCD ect.

The main control uses the ARM-level Cortex-M4 series with a 32-bit dominant frequency of 168 MHz STM32F407ZGT6 chip, performance is greatly improved.
Equipped with highly modular open source firmware Marlin2.0, it is convenient for users to DIY and further-development, to avoid the worry of not being able to master the core code.
Motor driver support :TMC2209,TMC2208,TMC5160,TMC2130,ST820,LV8729, DRV8825,A4988, etc.Display screen support: BIGTREETECH- 2.8 inch TFT,BIGTREETECH-3.5 inch TFT, LCD2004,LCD12864.
Support Serial WIFI Online Printing. 6 motor drives, 3 extruders, 3 CNC fans. Reserve extended ports of BL Touch, PWM, ADC, UART, I2C and SPI;Support power-off continuous printing, material cut detection, shutdown and other functions;Support for dual Z axis printers (series dual Z.
If you encounter any problems, please contact us via Amazon as soon as possible. We have professional technical after-sales personnel to solve your problems;

Rank No. #13

2022 Upgrade Official Ender 3 S1 Mainboard, 32 Bit Silent Mainboard, V2.4 Silent Board with TMC2208 Drivers, Including 8GB SD Card, Board Fuse. Just Fit for Ender 3 S1 and Ender 3 S1 Pro 3D Printer

【Application】 This Ender 3 S1 Mainboard is 100% original from Creality. Just fits for Creality Ender 3 S1 3D Printer and Ender 3 S1 Pro.
【Super Quiet】The silent mainboard can reduce stepper motor noise. TMC ultra-quiet motor drive chip, ultra-quiet system design, so that the machine is always running at low decibels (<50dB).
【Driver】With TMC2208 driver, the bootloader has been preinstalled. You only need to copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process., easier to flash the firmware.
【Optimized Circuit】Ender 3 S1 adopt thermal runaway protection to effectively solve heating problems. Could be used in combination with the E/Z/Y/X drive axis. NOTICE: It only plug and play for Ender-3 S1. If you want to install it on Ender 3 S1 Pro, please flash the machine firmware. You can download firmware from official website.
【After Sales Service】More than 10 engineers provide lifetime technical assistance. Please kindly contact us(seller) via “ask a question” find us directly, cause our customer service will respond to you within 24 hours.

Rank No. #14

Creality Ender 3 v2 32 Bit Motherboard Silent Mainboard V4.2.7 with TMC2225 Driver Marlin 2.0.1 for Ender 3 v2/ Ender 3/ Ender 3 Pro/Ender 5 3D Printer

Super Quiet. Compatible with Creality Ender 3 v2, Ender 3 Pro, Ender 3, Ender 5 3D printer. PLEASE NOTICE: It only plug and play for Ender-3 v2. If you want to install it on Ender-5, please flash Ender-5 firmware. You can download firmware from Official website.
Driver - TMC2225 driver & Creality V0.0.6 firmware ( based on Marlin 2.0.1) for V4.2.7 board. Bootloader has been preinstalled.
Update Firmware - Please copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process.
Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve the Heating Problem.
Any issues or questions about our product please feel free to contact us at any time. We have professional technical Team to provide technical supports for you as soon as we can.

Rank No. #15

BIGTREETECH SKR Mini E3 V3.0 Motherboard with TMC2209 UART Stepper Driver BTT 32bit Silent Control Board Support Marlin/Klipper for Ender-3,Ender-3 V2, Ender-3 Pro 3D Printer

🔥【Born for Ender-3】Main control chip of BTT SKR Mini E3 V3.0 mainboard is STMicroelectronics' latest G0 series: STM32G0B1RET6 or STM32G0B0RET6. This 3D printer control board is compatible with Ender-3, Ender-3 V2, Ender-3 Pro, Ender-5 and Ender-5 pro.
🔥【Larger Heatsink and 3 CNC Fans】Upgraded SKR MINI E3 V3.0 has a larger aluminum heat sink area for stepper motor driver, increasing its heat dissipation performance by 20%. And SKR MINI E3 V3 also has 3 heat dissipation controllable fans to reduce the heat of your 3D printers when it's working.
🔥【DIY Friendly】BTT SKR Mini E3 V3.0 motherboard supports BLTouch, RGB lights, blocking detection and shutdown function. It also supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28 V3.0 touch screen as well as original 12864 LCD screen.
🔥【Onboard TMC2209 Drivers】BIGTRETECH SKR MINI E3 V3.0 mainboard is integrated with ultra silent TMC2209 stepper motor driver. TMC2209 driver generates lower heat and has a larger-area cooling position to lower the working temperature. Meanwhile, TMC2209 adopts stealthChop2 Mute technology to ensures noiseless operation, maximum efficiency and best motor torque.
🔥【Firmware Update】SKR Mini E3 V3.0 is compatible both with Marlin and Klipper firmwares. Firstly download firmware on GitHub website of SKR MINI E3 V3.0 motherboard, copy and save it to SD card (Note: ensure firmware have been reserved ), then re-plug the SD card and wait for 10s. Note: Our control board comes without SD card.

SaleRank No. #16

FYSETC 3D Printer Parts UCAN Board V1.0 Based on STM32F072 USB to CAN Adapter Type C Interface Support CANable/Candlelight/Klipperr Firmware-Pack of 1

This STM32 USB type C card is Based on STM32F072, high quality and durable.
Supports CAN2.0 A and B, baud rates up to 1M.
3-pin screw terminal: CANH, CANL, GND.
Support with CANable / CandleLight / Klipper firmware.
Jumper to enter bootloader for firmware updates. Onboard 120R termination default or Jumper to enable/disable termination

Rank No. #17

Official CR E3 Free-Run 3D Printer Silent Board Motherboard V4.2.7 with TMC2209 Driver 32 Bit Supports Marlin Klipper-Upgrade for Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Max (E3-Free Runs)

SaleRank No. #18

Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matchingl Ender 3 Silent Mother Board, Also for Ender 3 Max/Ender 3 Neo/3 V2 Neo/3 Max Neo

Creality new release silent motherboard V4.2.7，32bit, compatible with Ender 3.
Super quiet by TMC2225 drivers , Bootloader installed,copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process., easier to flash the firmware.
Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve Heating Problem.
Firmware comes pre-installed, pre-configured for the Ender 3, makes it totally plug & play.
This silent mainboard preinstalls the Ender-3 firmware. If you want to install it in your Ender 3 Pro/Ender3 v2/ Ender-5/Ender 3 Neo/3 V2 Neo/3 Max Neo, need to flash the Ender 3 Pro/Ender 3 v2/Ender-5/Ender 3 Neo/3 V2 Neo/3 Max Neo firmware from Creality download website.

Rank No. #19

BIGTREETECH TFT35 E3 V3.0.1 Touch Screen Display RepRap Smart Controller Panel Compatible with SKR Mini E3 SKR E3 DIP Board for Ender 3 CR10 3D Printer

❤【Touch Screen for Ender 3 】Appearance size: 93*87mm, power input : 5V. This is a 3.5 inch full-color screen with ultra clear interface and responsive touch, it is designed for ender 3 3d printer especially, which can be a drop-in replacement for its original LCD screen.
❤【Two Working Modes】TFT35 E3 V3.0.1 touch screen support UART serial port screen mode (touch screen mode) and 12864 screen mode, it can replace original display of Ender 3 3D printer. You can enjoy two printing modes: SD card and U disk.
❤【More Extension Ports is Reserved】TFT35 E3 V3.0.1 display r eserve the extension port of filament breaking detection,automatic shutdown after printing,also WIFI function can be realized by external WIFI module through WIFI port.
❤【Firmware Update】 TFT35 E3 V3.0.1 is easy and convenient to update firmware by SD card,download from our github, copy and save it to SD card.firmware must bed reserved ,then re-plug the SD card and wait to 10s.The firmware has been successfully updated.
❤【Quality Warranty 】TFT35 E3 V3.0.1 touch screen is designed and produced by BIGTREETECH team,any questions and feedback about that please free to tell us, we have professional technical team to support you

Rank No. #20

BIGTREETECH Mini12864 V2.0 LCD Graphic Smart Display Control Board with Adapter and Cable for Ender-3 VORON 2.4 Prusa-i3 3D Printer RAMPS 1.4 RepRap 3D Printer Mendel Prusa Arduino

1.The Mini12864 display panel has RGB multi-color backlight and can support 8 RGB, which is even more cool.
2.With a SD card base on back, put slicing file into the SD card and select the file on the LCD, then can be printing.
3.Product comes encoder parameter adjustment can be achieved, and the file selection print.
4.Plug and play on the RAMPS, but need to modify the firmware to support.
5.Do not worry about the problem of after-sales, if there is any need, get in touch with us, we will help you solve it.

Last update on 2023-08-02 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best 3D Printer Board?

Do you get stressed out thinking about shopping for a great 3D Printer Board? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 3D Printer Board, which is why we have assembled a comprehensive list of the greatest 3D Printer Board available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 3D Printer Board that you consider buying. Your questions might include the following:

Is it worth buying an 3D Printer Board?
What benefits are there with buying an 3D Printer Board?
What factors deserve consideration when shopping for an effective 3D Printer Board?
Why is it crucial to invest in any 3D Printer Board, much less the best one?
Which 3D Printer Board are good in the current market?
Where can you find information like this about 3D Printer Board?

We’re convinced that you likely have far more questions than just these regarding 3D Printer Board, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for 3D Printer Board, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 3D Printer Board. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an 3D Printer Board buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 3D Printer Board currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of 3D Printer Board has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an 3D Printer Board?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your 3D Printer Board.
Customer Ratings: Number ratings grade 3D Printer Board objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 3D Printer Board.
Product Quality: You don’t always get what you pay for with an 3D Printer Board, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an 3D Printer Board is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining 3D Printer Board information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding 3D Printer Board is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: What can you print with a 3D printer?

A: A 3D printer can print out most of the parts that you will need to build your own 3D printer. The structural components that make up a 3D printing machine can be printed and assembled even though the process itself would be time-consuming. But 3D printing the electronic parts is certainly more complex.

Q: What is the cheapest 3D printing?

A: The cheapest 3D printers are simple models, like the $749 Printrbot Simple with Heated Bed or the $999 Cubify Cube 3 (see review). These printers use a process typically called filament deposition manufacturing (FDM).

Q: How much does 3D printing cost?

A: 3D printing, if you were to want to do it at home, could cost anywhere from $220 to $2,200 for just the printer. This printer will be much different than a commercial-based printer since it’s designed for the average hobbyist.

Q: What are some things to 3D print?

A: 35 Cool Things to 3D Print Which Are Actually Useful Cool Things to 3D Print #1: Auto Coin Sorter for All Currencies Cool Things to 3D Print #2: Collapsible Coffee Sleeve Cool Things to 3D Print #3: Cable Management Hive Cool Things to 3D Print #4: Snap On Portal Bookstand Cool Things to 3D Print #5: Tampon Magazine