The Best 3G Gsm Module Arduino of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best 3G Gsm Module Arduino of 2023. Check our ranking below.

2,245 Reviews Scanned

Rank No. #1

4G 3G 2G GSM GPRS GNSS HAT Based on SIM7600G-H LTE CAT4 150Mbps Wireless Communication Telephone Call SMS Positioning for Raspberry Pi 4 3 2 Model B B+ Zero W WH Jetson Nano (Global Version)@XYGStudy

Part Number: SIM7600G-H 4G HAT
4G/3G/2G/GSM/GPRS/GNSS HAT for Raspberry Pi, Based on SIM7600G-H
The SIM7600G-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano

Rank No. #2

4G/3G/2G/GSM/GPRS/GNSS HAT Module for Raspberry Pi /4B/3B+3B/2B/Zero/Zero W/Zero WH/Jetson Nano Based on SIM7600G-H Support LTE CAT4 up to 150Mbps for Downlink Data Transfer,the Global Version

The SIM7600G-H 4G HAT with Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.Supports dial-up, telephone call, SMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.Supports GPS, BeiDou, Glonass, LBS base station positioning
Onboard USB interface, to test AT Commands, get GPS positioning data, and so on.Onboard CP2102 USB to UART converter, for serial debugging.Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper.Breakout UART control pins, to connect with host boards like Arduino/STM32
Baudrate: 300bps ~ 4Mbps (default: 115200bps).Autobauding baudrate: 9600bps ~ 115200bps.Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Rank No. #3

SIM5320E 3G Module GSM GPRS SMS Development Board with GPS PCB Antenna for Arduino

SIM5320E 3G Module GSM GPRS SMS Development Board With GPS PCB Antenna For Arduino

Rank No. #4

HiLetgo Smallest SIM800L GPRS GSM Breakout Module Quad-Band 850/900/1800/1900MHz SIM Card Slot Onboard with Antenna 3.7~4.2V

Mini GSM / GPRS breakout board is based on SIM800L module, supports quad-band GSM/GPRS network, available for GPRS and SMS message data remote transmission.
The board features compact size and low current consumption. With power saving technique, the current consumption is as low as 1mA in sleep mode.
It communicates with microcontroller via UART port, supports command including 3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands.
AT command interface with "auto baud" detection.
TTL serial port for serial port, you can link directly to the microcontroller

Rank No. #5

Arduino MKR GSM 1400 [ABX00018]

Connects your Electronic Project to Mobile Networks
Provides Global 3G/2G Connectivity and supports HSPA/GSM for Global Coverage
Ideal for: IoT, cellular networks, automotive, home automation, smart home, wearable
Part of the Arduino Maker Board Family for IoT Devices, easy to configure with Arduino Software

Rank No. #6

Teyleten Robot SIM800C USB GSM GPRS Wireless Module Quad-Band, 850/900/1800/1900MHz, CH340T USB Chip Support 2G 3G 4G SIM Card USB Communication SMS Data Transmission with Antenna （SIM800C is New）

1. SMS send and receive: Provide management software to facilitate the sending and receiving of sms
2. Telephone function: One instruction can get ATD10086
3. GPRS transmission data: Small amount of data transmission suitable for industrial use, such as wireless meter reading, weather monitoring, etc.
4. Bluetooth transmission data (with high support): The Bluetooth standard is IEEE802.15, operates in the 2.4GHz band, and can be used for file transfer and data transmission with other Bluetooth devices.
5. TTS voice synthesis (with high support): During the call, send text to the device, the device will convert the text into voice and output to the mobile phone end.

Rank No. #7

3G/GPRS/GSM Shield for Arduino with GPS - American Version SIM5320A

Antenna included

Rank No. #8

waveshare 4G/3G/2G/GSM/GPRS/GNSS HAT for Raspberry Pi Based on SIM7600G-H Supports LTE CAT4 up to 150Mbps for Downlink Data Transfer

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano Supports dial-up, telephone call, SMS, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, GALILEO, QZSS, LBS base station positioning
Onboard USB interface, to test AT Commands, get GPS positioning data, and so on Onboard CP2102 USB to UART converter, for serial debugging Breakout UART control pins, to connect with host boards like Arduino/STM32
SIM card slot, supports 1.8V/3V SIM card TF card slot for storing data like files, messages, etc. Onboard audio jack and audio decoder for making telephone call
2x LED indicators, easy to monitor the operating status Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper Baudrate: 300bps ~ 4Mbps (default: 115200bps)
Autobauding baudrate: 9600bps ~ 115200bps Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)

Rank No. #9

4G / 3G / GNSS HAT Module for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B/Jetson Nano, Based on SIM7600A-H , 4G Communication and GNSS Positioning Module Support LTE CAT4 up to 150Mbps

Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B,Jetson Nano,Onboard USB interface, to test AT Commands, get GPS positioning data, and so on.Onboard CP2102 USB to UART converter, for serial debugging
This item is mainly applicable in North America (US, CA, MX). Supports dial-up, telephone call, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.Supports GPS, BeiDou, Glonass, LBS base station positioning
Breakout UART control pins, to connect with host boards like Arduino/STM32，SIM card slot, supports 1.8V/3V SIM card
Onboard audio jack and audio decoder for making telephone call，Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper，2x LED indicators, easy to monitor the working status
Supports SIM application toolkit: SAT Class 3, USAT，Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32).Please contact the seller via Amazon message if you have any problem.

Rank No. #10

Comimark 2Pcs Smallest SIM800L GPRS GSM Phone Module Card Board Quad-Band Onboard + Antenna

Chip: SIM800L
Voltage: 3.7-4.2V
Support networks: China Mobile, China Unicom and global quad-band network
Package Included: 2 x Smallest SIM800L GPRS GSM Module Card Board Quad-band Onboard + Antenna
Package Included: 2 x Smallest SIM800L GPRS GSM Module Card Board Quad-band Onboard + Antenna

Rank No. #11

70 3G/4G LTE Base Hat for Raspberry Pi 4/3/2/B+ Module Computer Board to USB with SIM Card,3G/4G LTE to USB Module,3Amps Efficient and Low Quiescent Current Power,for Desktop PC/Laptop

High Performance：Clip‑in mini PCI‑E socket is compatible with worldwide LTE, for UMTS/HSPA+ and for GSM/GPRS/EDGE coverage with regional or global modules which work with different frequencies and carriers
Efficient and Low Quiescent Current： Efficient and low quiescent current power circuit can support up to 3Amps.Working Temperature Range: -40℃ ~ 80℃
Easy to Use：For NANO SIM card socket can easily reachable from the upside of the HAT.Can be used standalone with PC/Laptop over micro USB without stacking with for Raspberry Pi
Wide Compatibility： Totally compatible with for Raspberry Pi 4/3/2/B+ models with the 40-pin GPIO header.Compatible with most Brand Boards and Mini PCI-E Modules
Quality Service：We have a 24-hour online professional customer service team.If the product has any quality problems or you have any questions about this product, you can contact us at any time

Rank No. #12

Botletics SIM7000 LTE CAT-M1 NB-IoT Cellular + GPS + Antenna Shield Kit for Arduino (SIM7000A)

Operates on LTE CAT-M1 and/or NB-IoT technology + GPS
Directly compatible with Arduino Uno, Mega, and Leonardo + easy connection for other logic voltages
Ultra low-power mode drawing < 8uA, ideal for battery-powered IoT devices + LiPo battery charging
Kit includes dual flexible LTE/GPS antenna and stacking female header kit
Detailed documentation, wiki, Arduino library, and code examples on Github + community forum to ask questions

Rank No. #13

4G / 3G / GNSS HAT Module for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ Based on SIM7600A-H, 4G Communication and GNSS Positioning Module Support LTE CAT4 up to 150Mbps for North America

Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+，Onboard USB interface, to test AT Commands, get GPS positioning data, and so on.Onboard CP2102 USB to UART converter, for serial debugging
This item is mainly applicable in North America (US, CA, MX). Supports dial-up, telephone call, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.Supports GPS, BeiDou, Glonass, LBS base station positioning
Breakout UART control pins, to connect with host boards like Arduino/STM32，SIM card slot, supports 1.8V/3V SIM card
Onboard audio jack and audio decoder for making telephone call，Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper，2x LED indicators, easy to monitor the working status
Supports SIM application toolkit: SAT Class 3, USAT，Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

Rank No. #14

ACEIRMC 6pcs DS1302 Real Time Clock Module High Precision Development Green for Arduino AVR ARM

This DS1302 Clock module can provide information of seconds, minutes, hours, days, weeks, months, years, the number of days in a month and the number of days automatically adjusted in leap year.
DS1302 Clock Module Real-Time Clock Module RTC for Arduino AVR ARM
Communication with the microcontroller through a simple serial interface, Clock operation by AM / PM indicator decided to use 24 or 12 hour
DS1302 real-time clock chip is widely used in telephone, fax, portable instruments, small data experiments and other product fields
DS1302 contains a real-time clock / calendar and 31 bytes of static RAM

Rank No. #15

HiLetgo 5pcs Micro SD TF Card Adater Reader Module 6Pin SPI Interface Driver Module with chip Level Conversion for Arduino UNO R3 MEGA 2560 Due

Rank No. #16

4G/3G/2G/GSM/GPRS/GNSS HAT for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/WH and Jetson Nano/Ard/STM32,Based on SIM7600G-H,Support LTE CAT4 up to 150Mbps Wireless Communication etc (Globally Applicable)

The SIM7600G-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption. You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc. (Globally Applicable)
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. Breakout UART control pins, to connect with host boards like Arduino/STM32.
Supports dial-up, telephone call, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning. Onboard USB interface, to test AT Commands, get GPS positioning data, and so on. Onboard CP2102 USB to UART converter, for serial debugging.
SIM card slot, supports 1.8V/3V SIM card. TF card slot for storing data like files, messages, etc. Onboard audio jack and audio decoder for making telephone call. 2x LED indicators, easy to monitor the working status. Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper.

Rank No. #17

SIM7600A-H 4G/3G/GNSS HAT for Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH and Jetson Nano, 4G Communication and GNSS Positioning Module LTE-FDD B2/B4/B12 Brand Support LTE CAT4 up to 150Mbps

The SIM7600A-H 4G HAT (Based on SIM7600A-H) is a 4G communication and GNSS positioning module, Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards(compatible with Raspberry Pi Zero/Zero W/Zero WH/A+/B+/2B/3B/3B+/4B) and Jetson Nano. LTE-FDD B2/B4/B12 Brand,supports LTE CAT4 up to 150Mbps for downlink data transfer.This module is mainly applicable in North America (US,CA)
You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
Onboard USB interface, to test AT Commands, get GPS positioning data,etc.Onboard CP2102 USB to UART converter, for serial debugging.Onboard audio jack and audio decoder for making telephone call.Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
Supports dial-up, telephone call, SMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.Supports GPS, BeiDou, Glonass, LBS base station positioning.Supports SIM application toolkit: SAT Class 3, USAT.
Breakout UART control pins, to connect with host boards like Arduino/STM32.Autobauding baudrate: 9600bps ~ 115200bps.Baudrate: 300bps ~ 4Mbps (default: 115200bps).Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).2x LED indicators, easy to monitor the working status,Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Rank No. #18

SIM808 Module GSM GPRS GPS Development Board + IPX SMA GSM GPS Antenna Support 2G Network for Arduino Raspberry Pi

This sim808 module is used to open / close the input power supply for the module. When in use, please confirm the toggle switched to the OPEN state (near the board inside)
SMA antenna interface: there is a GSM antenna interface, a GPS antenna interface onboard and a BT antenna interface
USB interface: This interface is just use to update the firmware of SIM808 module
SIM808 gsm only works with 2G Network It can send SMS message.
Three power input interface: DC044 interface and V_IN and a lithium battery interface.

Rank No. #19

Deegoo-FPV New 12pcs NRF24L01+ 2.4GHz Arduino Wireless RF Transceiver Module

Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications.
125 Communications channels, Multi-point communication and frequency hopping to meet the communication needs.
Built-in hardware CRC error detection, Multipoint communication address control. Built-in 2.4Ghz antenna.
nRF24L01 is a single chip radio transceiver for the worldwide 2.4 - 2.5 GHz ISM band. Compatible with Arduino and Raspberry Pi.
Applications: wireless peripherals, remote control systems such as RC vehicles and consumer remote electronics, wireless voice transmission such as VoIP, wireless sensor networks, wireless networks, home and commercial automation.

Rank No. #20

Waveshare 4G/3G/GNSS HAT for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ Jetson Nano Based on SIM7600A-H LTE CAT4 up to 150Mbps Support Phone Call Wireless Communication

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano Supports dial-up, telephone call, SMS, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, GALILEO, QZSS, LBS base station positioning
Onboard USB interface, to test AT Commands, get GPS positioning data, and so on Onboard CP2102 USB to UART converter, for serial debugging Breakout UART control pins, to connect with host boards like Arduino/STM32
SIM card slot, supports 1.8V/3V SIM card TF card slot is NOT soldered for this variant Onboard audio jack and audio decoder for making telephone call
2x LED indicators, easy to monitor the operating status Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper Baudrate: 300bps ~ 4Mbps (default: 115200bps)
Autobauding baudrate: 9600bps ~ 115200bps Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)

Last update on 2023-08-11 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best 3G Gsm Module Arduino?

Do you get stressed out thinking about shopping for a great 3G Gsm Module Arduino? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 3G Gsm Module Arduino, which is why we have assembled a comprehensive list of the greatest 3G Gsm Module Arduino available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 3G Gsm Module Arduino that you consider buying. Your questions might include the following:

Is it worth buying an 3G Gsm Module Arduino?
What benefits are there with buying an 3G Gsm Module Arduino?
What factors deserve consideration when shopping for an effective 3G Gsm Module Arduino?
Why is it crucial to invest in any 3G Gsm Module Arduino, much less the best one?
Which 3G Gsm Module Arduino are good in the current market?
Where can you find information like this about 3G Gsm Module Arduino?

We’re convinced that you likely have far more questions than just these regarding 3G Gsm Module Arduino, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for 3G Gsm Module Arduino, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 3G Gsm Module Arduino. Make sure that you are only using trustworthy and credible websites and sources.

We provide an 3G Gsm Module Arduino buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 3G Gsm Module Arduino currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of 3G Gsm Module Arduino has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an 3G Gsm Module Arduino?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your 3G Gsm Module Arduino.
Customer Ratings: Number ratings grade 3G Gsm Module Arduino objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 3G Gsm Module Arduino.
Product Quality: You don’t always get what you pay for with an 3G Gsm Module Arduino, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an 3G Gsm Module Arduino is should be an indication of how long it will work out for you.

We always remember that maintaining 3G Gsm Module Arduino information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding 3G Gsm Module Arduino is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

The Best 3G Gsm Module Arduino of 2023 – Reviewed and Top Rated

How Do You Buy The Best 3G Gsm Module Arduino?

Related Post: