Contents

The Best 4 jaw lathe chuck of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best 4 jaw lathe chuck of 2023. Check our ranking below.

2,824 Reviews Scanned

Rank No. #1

Lathe Chuck 100mm 4 Jaw Independent Chuck K72-100 Manual Type Metal Chuck 4 Jaw

【Install Size】1. Center Hole Diameter: 0.984" / 25 mm. 2. Bolt Circle Diameter: 3.307" / 84mm 3. Front Edge Diameter : 2.834"/72mm
【Notification】This is 4 hole install,Must make flange for connecting,Can't directly mount !!!
【Parameter】Model : K72-100 . Speed: Max RPM: 3500 r/min 4 Jaw Chuck .Each Jaw Are Independently Adjustable
【Clamp Range】Internal Jaw: 6- 45 mm Jamming Range: 40- 100mm
【Keywords】4 Jaw Independent Chuck

Rank No. #2

VINWOX SCR4-4 Wood Lathe Chuck, 4-Jaw Self-Centering Chuck, with 1"x8TPI thread & 3/4"x16TPI Adapter, 3 Years Warranty

✅Products include: Included Chuck body, a set of Tightening Levers, T allen wrench, Screw chuck, adapter converts 1'' x 8TPI to 3/4" x 16TPI and Free Automatic Spring Loaded Center Punch, MAKE SURE check your wood lathe FIT first.
✅Internal jaws tighten around workpieces varying from 1-1/2" to 3" (or 3" Square Block). External jaws spread inside of workpieces with pilot holes ranging from 2" to 3-5/8" Included screw chuck provides even more options for supporting your projects
✅4" sturdy steel body with electric plating for long term anti-rust performance. Both sides of jaw teeth and guides are ground and hardened for long and stable service life. All guideways and bearing surfaces are precisely machined
✅Scroll chuck perfect for holding bowls, spindles, and other unwieldy wood lathe projects. Widely used for machine tools and accessories for general lathes and industrial machines
✅Stable Service and Long Life: VINWOX Gear Chuck made from high grade K1045 steel machined to allow closest tolerances is with electric plating for long term anti-rust performance. Both sides of jaw teeth and guides are ground, all guideways and bearing surfaces are precisely machined for stable service and long life

SaleRank No. #3

Mophorn K72-100 Lathe Chuck 4 Inch 4-Jaw,Lathe Chuck Independent Reversible Jaw,Metal Lathe Chuck Turning Machine Accessories,for Lathes Machine

【PREMIUM MATERIAL】 - Diameter: 100 mm (3.93 in). The 4-jaw mini lathe chuck body is made of cast iron that has passed rigorous quality tests. So it is rigid and durable.
【REVERSIBLE JAW SET】 - The lathe chuck is equipped with four reversible jaws that can be stepped inward or outward to hold raw materials of different sizes.
【ENHANCED FLEXIBILITY】 - The T chuck key of the lathe part allows the installation of various workpieces. And easy operation reduces changeover time for your convenience.
【OF HIGH PRECISION】 - The 4-jaw lathe chuck works accurately, bearing tolerance of ≤0.07 mm (0.003 in) to ensure satisfying metal processing.
【REMARKABLE VERSATILITY】 - This chuck has a compact construction. It is suitable for installation on a metal lathe chuck and clamping workpieces of various shapes.

Rank No. #4

WEN LA4444 4-Inch 4-Jaw Self-Centering Chuck Set with 1-Inch x 8TPI Thread

Scroll chuck perfect for holding bowls, spindles, and other unwieldy wood lathe projects
Internal jaws tighten around workpieces varying from 1.6 to 2.8 inches in size
External jaws spread inside of workpieces with pilot holes ranging from 2 to 3.2 inches
Included screw chuck provides even more options for supporting your projects
Features a 1” x 8 TPI thread for compatibility with the majority of wood lathes on the market

Rank No. #5

WEN LA4374 3.75-Inch 4-Jaw Self-Centering Lathe Chuck Set with 1-Inch x 8TPI Thread

Scroll chuck perfect for holding bowls, spindles, and other unwieldy lathe projects
Internal jaws tighten around workpieces varying from 1-1/4 to 2-1/2 inches in size
External jaws spread inside of workpieces with pilot holes ranging from 1-3/4 to 3-1/8 inches
Keyed tightening mechanism provides additional grip strength to the workpiece
Features a 1” x 8 TPI thread for compatibility with the majority of wood lathes on the market

Rank No. #6

DEEFIINE 4 Inch Wood Lathe Chuck Set 1" x 8 tpi & 3/4"x16TPI Adapter, Self Centering 4 Jaw Wood Turning Chuck

The chuck Included chuck body& 2pcs 5-Inch wrenches,1pcs 3/4"x16TPI Adapter.
Features - The jaws of this self centering four jaw chuck can be installed in both positive and negative directions to meet different requirements, and are used to clamp various round or square workpiece sizes inside or outside.
Blackened surface treatment and solid structure greatly reduce rust and maintenance
The clamping and external support of our chuck are larger, please refer to the detailed description.
The chuck suitable all wood lathes with 1-inch x 8 TPI or 3/4"x16TPI spindles. Threaded chucks allow for quick and easy mounting and dismounting saving you time.

SaleRank No. #7

PSI Woodworking CUG3418CC Utility Grip 4-Jaw Lathe Chuck System

Heavy duty chrome-plated self-centering chuck will hold your work tight & secure on midi and full size woodworking lathes
Chuck is pre-threaded to 1" x 8tpi and includes 3/4" x 16tpi headstock spindle adaptor; Chuck body weighs 4 lbs and is 4" in diameter
Includes #1 step jaws 3/32" to 1-7/8" External & 11/32" to 3-3/8" Internal; Includes #2 round jaws 1-1/2" to 3-1/8" External & 2" to 3-7/8" Internal
Includes screw chuck, allen wrench, and a set of tightening levers
This "C-Series" chuck is compatible with all "C-Series" jaws and accessories

Rank No. #8

CME 6" 4-Jaw Independent Lathe Chuck, Plain (Flat) Back, Reversible Jaws

Independent Reversible Jaws; Jaws are individually adjusted to achieve precise workholding for any application
Highly durable; Steel inner mechanisms are quench hardened to increase toughness
Plain back; Requires a fitted backing plate to mount to your lathe's spindle
160 mm Chuck Diameter; 55 mm Through-Hole Diameter; 8 mm - 80 mm Clamping Range; 50 mm - 160 mm External Clamping Range
65 mm Recess Diameter; 5 mm Recess Depth

SaleRank No. #9

RATTMMOTOR 4-Jaw K12-80mm Self-centering Linkage Lathe Chuck with Chuck Wrench for CNC Router Engraving Milling Machine

Mode Name: K12 series 4-Jaw self-centering chuck.
Diameter:80mm; Max input torque: 40N.m.
Max Speed: 4000R/min.
Internal jaw clamping range: 2-22mm; Internal jaw jamming range: 25-70mm; External jaw clamping range: 22-63mm.
Grease must be emptied out from the threaded holes of chuck before mounting.

Rank No. #10

DEEFIINE 4 Inch Wood Lathe Chuck Set 1" x 8 tpi thread & 3/4"x16TPI Adapter, Nickel Plated Self Centering 4 Jaw Wood Turning Chuck set (2PCS jaws)

Compatible with lathe that use 1”x 8 tpi thread, and 3/4" x 16 tpi using the adapter.
This is a set of nickel-plated chuck. Each part will not rust. This is its advantage over rusty chuck and can be used for a long time.
This set of chuck has two jaws, round jaws and big round jaws.
This is a set of high-precision chucks. Most parts are processed by CNC and can be used stably.
Include: Chuck Body、round Jaws 、big round. Tightening Gear Key, T-Allen wrench, Screw chuck, adapter converts 1'' x 8TPI to 3/4" x 16TPI.

Rank No. #11

CME 10" 4-Jaw Self-Centering (Scroll) Lathe Chuck, Plain (Flat) Back, Two-Piece Reversible Jaws

Two-Piece Reversible Jaws; Jaws are composed of top and bottom pieces; American Standard Tongue and Groove Style; ISO3442
Highly durable; Steel inner mechanisms are quench hardened to increase toughness
Plain back; Requires a fitted backing plate to mount to your lathe's spindle; CME fully machined backing plates are available
250 mm Chuck Diameter; 80 mm Through-Hole Diameter; 6 mm - 110 mm Clamping Range; 90 mm - 250 mm External Clamping Range
206 mm Registration Recess Diameter; 5 mm Registration Recess Depth; Rear mounting bolt holes are positioned on a 226 mm diameter circle

Rank No. #12

NOVA 48293 PREMIER PRO-TEK G3 CHUCK Bundle with 2" PRO-TEK Jaw Set, JSPIN 1" Pin Jaw Set, JS100N 4" Bowl Jaw Set, Woodworm Screw & Storage Case. 1"x 8 TPI Only (Does Not Use Inserts)

Premium nickel plating, minimizes rust and maintenance and is ideal for turning green wood.
Stronger and more versatile 50mm/2” PRO-TEK Jaws with an improved dovetail AND serrated profile for maximum control. The unique woodworking dovetail profile pulls the project into the chuck and holds round and square blanks firmly.
Precision laser etched jaw numbering allowing ease of jaw and slide alignment, positioning and change out.
Upgraded 6 point star fasteners exerting more torque with ease, for holding power and minimizing strip out. Includes 6 point T bar wrench
Intuitive Clockwise Jaw Closing Action (Righty Tighty, Lefty Loosey).

Rank No. #13

Grizzly Industrial H8049-6" 4-Jaw Wood Chuck - 1" x 8 TPI

8 TPI (Threads Per Inch)
Package dimensions: 6.25" x 7" x 2.75"
Approximate weight: 5.35 lbs

Rank No. #14

Mophorn Lathe Chuck K12-125 5 Inch 4-Jaw,Mini Lathe Chuck Quality Cast Iron Material,Lathe Chuck Self-centering With Two Sets Of Jaws,for Lathe Machine

【PREMIUM MATERIAL】 - Diameter: 125 mm (4.92 in); Clamping Range:2.5-110 mm (0.098"-4.33"); Jamming Range: 38-125 mm (1.5"-4.92"). The self-centering lathe chuck body is made of quality cast iron that is strong and durable. Several rigorous quality tests have proved that.
【INTERNAL & EXTERNAL JAWS】 - The 4-jaw lathe chuck comes with two sets of jaws—inside and outside—to extend its holding range, and therefore allows you to handle a wide variety of stock sizes.
【OF HIGH PRECISION】 - The self-centering lathe part contains a delicate bevel gear and pinion gears. They contribute to precise processing progress, bearing tolerance of ≤0.07 mm (0.003 in).
【WITH HIGH EFFICIENCY】 - The mini lathe chuck is easy to use by turning the ergonomic T chuck key (included in the package). Since the changeover and setting time is cut, your lathe can work with higher efficiency.
【WIDE APPLICATION】 - The metal lathe chuck is widely applied to metal lathes for the general turning of shafts and some more delicate materials. It would be the perfect choice for your lathe machine.

SaleRank No. #15

INTBUYING 4-Jaw Lathe Chuck K12-160 lathe chuck 160mm Metal chuck Independent Jaw for CNC Machine Tool and Accessories

The four-jaw lathe chuck is made of high quality steel,which is durable and has long service life after precision machining and quenching treatment.
The chuck body is specially treated and finely carved,with higher safety.The edges are smooth and burr free,the chamfering is uniform,and the precision is 0.003 '.
There are oil injection holes and speed limiting instructions in front of the chuck,at the back there is a screw opening and stop step to be connected with flange.
Four-jaw lathe chuck includes chuck,wrench,screws,positive claw,reverse claw.chuck diameter is 6.299" (160mm), thickness is 3.740",diameter is 6.299" (160mm).center hole is 1.771".
Wide application range and strong applicability,mainly used in a variety of lathes,milling machines,drilling machines and different machine tool accessories.

Rank No. #16

Z011 4-Jaw Lathe Chuck, Mini Lathe Chuck with Connecting Rod and Wrench, Self Centering Wood Turning Chuck, Power Lathe Accessory

【Material】Made up of Zinc Alloy material, anticorrosion, not easy to rust, durable and sturdy
【Features】High strength and hardness, small size, comfortable to wear.
【Accurate】With high centering accuracy as well as a large clamping range.
【Application】Design of three/four jaws, self-centering, widely used for woodworking lathe.
【Compact Size】The compact chuck is small in volume, easy to use.

Rank No. #17

Wood Lathe Chuck Set 1" x 8 tpi， 4 inch 4 jaw self-Centering Woodturning Chuck for Lathe

Compatible with lathe that use 25mm x 8 tpi thread. This set contain 3 frequently used types of jaws so they can handle various shaped blocks
The jaws in this bundle tightly grips from the pens of 5mm to bowls of 100mm, and they can expand to hold the inside of large bowls if you are experienced with turning works thats larger than jaws
This set is easy to install and use. The jaw tightening key allow you to conveniently operate the gripping
Full steel chuck body, jaws are quenched and hardened, nickel plating is stainless and wear-resistant, ensuring long service life.
Considerate black tool box for you to store these tools. And it's easy to carry.

Rank No. #18

5 Inch 4 Jaw Lathe Chuck 125MM SANOU 4 Jaw Self-Cening Chuck K12-125 Manual Metal Lathe Chuck 4 Jaw

【Mount Size】1. Center Hole Diameter: 1.18" / 30 mm. 2. Bolt Circle Diameter: 4.25" / 108 mm. 3 . Front Edge Diameter :3.74"/95mm.
【Notification】1. Focus on install size before order . 2. The chuck must match flange use. 3. It mainly use for 8x16 mini lathe. 4 . Make sure your old chuck is 125mm
【Parameter】Name: 4 Jaw chuck 125mm Model : K12-125 . Speed: Max RPM: 3000 r/min
【Clamp Range】Internal Jaw: 2.5- 40mm External Jaw : 38- 110mm
【Material】Chuck body use high quality material cast iron was by frequency hardened .Jaw use steel .

Rank No. #19

UOKRR 3.75" Wood Turning Chuck, Wood Lathe Chuck 4-Jaw Gear Chuck, 1In x 8TPI Thread Mini Key Chuck, Precision Self-Centering Woodturning Chuck Jaws, Wood Lathe Accessories for Bowls Vases

Premium Quality：The material of the 4-jaw gear chuck is made from high-grade K1045 steel with anti-rust oil coated surface, compact and stable designed chuck will support high intensity and repeatability turning work, has the features of excellent durability and long service time.
Applicable Size: This self-centering lathe chuck has a large clamping size to meet your requirements for carving different wood crafts. The size ranges of inside jaws for clamping workpieces is from 2” to 2.5”, and the outside jaws is from 2.4” to 3.1”.
High Performance: This mini woodworking chuck with the features of flexible self-centering and self-locking system to provide sturdy clamping force and accurate calibration. You don't need to constantly calibrate the chuck when using it with Its precision guide rails.
Wide Application: This wood turning chuck includes a precision jaw and a set of complete accessories, including 1 x adapter, 1 x Screw Chuck Stud, 1 x Allen wrench, and 1 x wrench.It's easy to operate and the chuck with 1” x 8TPI and M33*3.5 TPI thread can widely used for processing wood, plastic and resin materials.
Our service: Our this mini wood turning chuck jaws has 3 years warranty and free return or replacement within 30 days, please feel free to contact us if there will be any problems with the audio Bluetooth receiver, we will give you a satisfying solution ASAP.

Rank No. #20

100mm 4 Jaw Chuck SANOU 4 Jaw Self-Centering Chuck K12-100 Mini Metal Lathe Chuck Scroll Chuck For Small Lathe

【Mount Size】1. Center Hole Diameter: 0.866" / 22 mm. 2. Bolt Circle Diameter: 3.31" / 84 mm. 3 . Front Edge Diameter : 2.83"/72 mm.
【Notification】1. Focus on install size before order . 2. The chuck must match flange use. 3. It mainly use for 7x14 mini lathe. 4 . Make sure your old chuck is 100mm
【Parameter】Model : K12-100 . Speed : Max RPM: 3500 r/min
【Clamp Range】Internal Jaw: 2- 30mm External Jaw : 30- 80mm
【Keywords】4 Jaw Lathe Chuck 100mm

Last update on 2023-08-06 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best 4 jaw lathe chuck?

Do you get stressed out thinking about shopping for a great 4 jaw lathe chuck? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 4 jaw lathe chuck, which is why we have assembled a comprehensive list of the greatest 4 jaw lathe chuck available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 4 jaw lathe chuck that you consider buying. Your questions might include the following:

Is it worth buying an 4 jaw lathe chuck?
What benefits are there with buying an 4 jaw lathe chuck?
What factors deserve consideration when shopping for an effective 4 jaw lathe chuck?
Why is it crucial to invest in any 4 jaw lathe chuck, much less the best one?
Which 4 jaw lathe chuck are good in the current market?
Where can you find information like this about 4 jaw lathe chuck?

We’re convinced that you likely have far more questions than just these regarding 4 jaw lathe chuck, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for 4 jaw lathe chuck, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 4 jaw lathe chuck. Make sure that you are only using trustworthy and credible websites and sources.

We provide an 4 jaw lathe chuck buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 4 jaw lathe chuck currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of 4 jaw lathe chuck has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an 4 jaw lathe chuck?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your 4 jaw lathe chuck.
Customer Ratings: Number ratings grade 4 jaw lathe chuck objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 4 jaw lathe chuck.
Product Quality: You don’t always get what you pay for with an 4 jaw lathe chuck, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an 4 jaw lathe chuck is should be an indication of how long it will work out for you.

We always remember that maintaining 4 jaw lathe chuck information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding 4 jaw lathe chuck is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: How do you use a wood lathe chuck?

A: Use a face plate when mounting wood. You can turn a jam chuck to hold the wood on the lathe. The process is: attach scrap wood to the face plate. turn the face of the wood flat. drill a hole into the wood for a tenon. insert the tenon on the turning blank. use the tail stock to support your work.

Q: What is lathe soft jaws?

A: Soft lathe chuck jaws are used for holding a workpiece while turned on a lathe. They are made of soft materials such as aluminum or mild steel and can be machined to precise specifications for accurately aligning the workpiece during an operation.

Q: What is three jaw chuck?

A: three-jaw chuck. (thrē’jaw chŭk) A grasp pattern emerging in the 10th-12th month that involves holding an object with an opposed thumb and the index and middle fingers where the interphalangeal joints are slightly flexed. The ulnar fingers are slightly flexed to stabilize the radial side of the hand.