Contents

The Best 4 Pin Screw Connector of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best 4 Pin Screw Connector of 2023. Check our ranking below.

2,623 Reviews Scanned

Rank No. #1

JANDECCN 10Pcs 4 Pin 5.08mm Pitch DIY PCB Mount Screw Terminal Block Connector with 10Pcs 4 Pin Phoenix Plug

Pitch: 5.08mm; Rated Value: 20A 300V ; Wire Range: 12-24AWG
Withstanding Voltage: AC1500V/1Min; Torque: 0.5 Nm (4.5lb-In)
Stripping length: 7-8mm; Temperature range: - 40 ° C ~ + 105 ° C
JANDECCN terminal blocks are made from high quality plastic PA66 with high temperature resistant and V0 flame retardant. PCB din rail adapter. Easy to install and detach. Just loosen the screws, insert the stripped cable and tighten the screws.
JANDECCN screw terminals can be used for Arduino wire connection. Widely applied in most electronics, communication equipment, instruments, computers, automatic control system, household appliance and warning devices, IC Socket, DIY PCB Universal Board, Power Modules and LCD Modules.

Rank No. #2

Jienk 5Set 4-Pin 300V 8A KF2EDGK 3.5mm Pitch Screw Terminal Block Pluggable Connector for 28-16AWG

【Terminal Pitch】3.5mm/ 0.14inch pitch PCB terminal block connector.
【Specification】 Position: 4Pin; Rated Value: AC300V; Rated Current: 8A; Wiring Range: 28-16AWG.
【Easy to Use】No soldering required. Just use a small screwdriver to open up the terminal blocks, slide in your stranded or solid-core wire, and re-tighten. Save you from solder trouble, no need to purchase expensive tool. Great time and money saver.
【Application】: PCB terminal is widely used in electronic equipment, such as small electronic watches, calculates, general computer, communication electronics equipment automatic control system, domestic appliance and warning devices, etc.
【Package Includes】: 5 x PCB Terminal Blocks.

Rank No. #3

Qjaiune 4-Pin 2.54mm Pitch PCB Terminal Block, 150V 6A Mount Screw Terminal Connector (20Pcs)

✿2.54mm Terminal Block: The package contains 20 x 4 pin PCB connector, rated voltage: 150V, rated current: 6A, wiring range: 24-12AWG.
✿High-Quality Material: The pin of the PCB screw terminal block is made of brass, which has good electrical conductivity. The shell of the PCB terminal block is made of plastic, flame-retardant and insulated, ensuring safety during use.
✿Wide Application Range: PCB terminal connectors are widely used in low frequency PCB wiring, 2.54mm pitch screw terminals are suitable for electronics, communication equipment, household appliances and alarm devices.
✿Easy to Use: PCB terminal block is simple to solder and easy to assemble. The PCB terminal block cannot be spliced, please select the pin size you need when purchasing.
✿About Service: We are committed to providing customers with high-quality products. If within 30 days you are not 100% satisfied with the product, please feel free to contact us, we will within 24 hours provide you with a satisfactory solution.

SaleRank No. #4

Hxchen 20Pcs 4-Pin 300V KF2EDGK 3.5mm Pitch PCB Screw Terminal Block Connector Green

【Package Included】: 20 x PCB Teminal Blocks
【Type】: 4 Positions, Plug-In PCB terminal block connector.
【Easy to Use】: PCB din rail adapter; Easy to install and detach.
【Specification】: Rated Value: AC300V; Terminal Pitch: 3.5mm/ 0.14"
【Application】: PCB terminal is widely used in almost all electronic equipment, such as small eletronic watches, calculatros, greneral computer, communication electronics equipment.

Rank No. #5

Keszoox 10 Sets 5.08mm Pitch Male & Female No Soldering Green Phoenix Type Connector 4 Pin PCB Screw Terminal Block

✔️About the project: This kit includes 10 sets phoenix connectors, [MALE and FEMALE] connector combine into 1 set.These Phoenix connectors are made of advanced materials. They are well made and stable with Ni plated copper metal block and UL 94V0 fireproof plastic shell.
✔️[Specification] Terminal spacing: 5.08mm; Rated voltage: 300V 10A. They are heat resistant, flame retardant and current balanced to ensure no leakage. Low signal loss and high switching frequency
✔️[Easy to Use] No soldering required. Just use a small screwdriver to open up the terminal blocks, slide in your stranded or solid-core wire, and re-tighten. Save you from solder trouble, no need to purchase expensive tool. Great time and money saver.
✔️[Simplify your wiring] Super fixed, better shockproof design, ensure long-term closed connection and safety and reliability.
✔️[About after-sales service] If you have any doubts, problems or are not satisfied with our products, please feel free to ask us for help, we will listen to your opinions and develop solutions for you within 12 hours.

Rank No. #6

LuoQiuFa10 Set 4-Pin 5.08mm Pitch Male Female PCB Screw Terminal Block

Product name: PCB terminal block; Model: 2EDG 5.08-4P;
Material: Plastic, Color: Green
Rated voltage: 300V; rated current: 15A; use wire diameter: 24-12 AWG.
Dimensions:Pin Distance 5.08 mm/0.2 inches; Total dimensions: about 20 x 22 x 15 mm (length * width * height)
Package Content : 10 Set x PCB Terminal Block

Rank No. #7

GINTOOYUN 2 Sets 4 Pin 5.08 mm Terminal, 4-Pin Pluggable Screw Terminal Block Connectors, 4P Through-Wall Terminal Connectors 2EDGWB+2EDGKM with Screw Lock Plate Fixed

【Function】4-Pole terminal pitch: 5.08mm. Through-wall plug-in screw terminal. One set: through-wall pin holder + connector socket. 2 sets/package. Suitable for electrical connection, bid farewell to traditional wiring, bid farewell to dangerous, safe wiring
【Feature】 Rated voltage and current: 300V 15A. Wire Diameter: 24-12AWG. Use high-quality environmental protection plastic PA66 high temperature resistant V0 flame retardant material, no series of electricity, no leakage
【Note】 Please refer to the picture for the size of the wall hole. M2.5 screws are required to secure the walls, please prepare them by yourself
【Convenient】 Simple wire connection mode, just need to loosen the screws to land the wires. The quick disconnect connecting block that makes these terminals easy to swap out another device without unscrewing all the wires
【Design】Anti-vibration design to ensure the long-term airtight connection, low control signal loss, high switching frequency, no mechanical contact jitter, not affected by position and long service life

Rank No. #8

MMOBIEL Power Supply Cable Connector 4-Pin Replacement for PlayStation 4 PS4 ADP-240CR 65mm Including TR8 Screwdriver

Replacement Power Supply Cable Connector 4-Pin Sony PlayStation 4 PS4 CUH-1115A ADP-240CR 65mm
Compatible with Sony PlayStation 4 PS4 ADP-240CR CUH-1115A
Note: Use the tip of a spudger to disconnect the antenna cable from the motherboard
Package includes: 1x Power Supply Cable Connector 4-Pin, 1x TR8 Screwdriver
Product provided by MMOBIEL - We always try our best to exceed your expectations at every turn. Join the ever growing list of satisfied customers and discover the difference with MMOBIEL.

Rank No. #9

Jienk 5Pcs 4-Pin 300V 8A 15EDGRK 3.81mm Pitch Screw Terminal Block Connector for 28-16AWG

【Terminal Pitch】3.81mm/ 0.15inch pitch PCB terminal block connector.
【Specification】 Position: 4Pin; Rated Value: AC300V; Rated Current: 8A; Wiring Range: 28-16AWG.
【Easy to Use】No soldering required. Just use a small screwdriver to open up the terminal blocks, slide in your stranded or solid-core wire, and re-tighten. Save you from solder trouble, no need to purchase expensive tool. Great time and money saver.
【Application】: PCB terminal is widely used in electronic equipment, such as small electronic watches, calculates, general computer, communication electronics equipment automatic control system, domestic appliance and warning devices, etc.
【Package Includes】: 5 x PCB Terminal Blocks.

Rank No. #10

Mardatt 32 Sets Male Female Pluggable Terminal Blocks Connector Socket, 5.08mm Pitch Plug-in PCB Mount Screw Terminal Block (2/3/4/5/6/7/8/9 Pins)

【Great Valve for Money】The Pluggable terminal block connector assortment set contains 9 type of female and male screw terminal block socket: 6 sets 2 pin terminal block, 6 sets 3 pin terminal block, 5 sets 4 pin terminal block, 5 sets 5 pin terminal block, 2 sets 6 pin terminal block, 2 sets 7 pin terminal block, 2 sets 8 pin terminal block, 2 sets 9 pin terminal block, 2 sets 10 pin terminal block, totally 32 sets.
【Product Feature】Rating: 300V 10A; Wire range: 14-22 AWG; Pitch- 5.08mm/0. 2 inches; Withstand Voltage: 2000v/min. Pin type: straight. Type : Single Rows.
【Premium Material】Made of high-quality plastic and cooper, featured with good conductivity, effective flame retardant, long service time, safe and reliable. The screw have a better anti-oxidation performance which make it more durable. Repeatedly plug, not easy to deform.
【Easy to Use】Not need to weld. Handy and easy to assemble, solder in easily and tighten very well on the terminated wires. Spiral wire is not easy to take off the line.
【Wide Application】 The PCB terminal connector is ideal for small electronic watches, digital tube, calculator, general computer, IC socket, PIC programming unit, DIY PCB universal board, automatic control systems, communication electronics device and other electronic equipment.

Rank No. #11

DGZZI 50pcs Blue 5mm Pitch PCB Mount Screw Terminal Block Connector for Arduino (20pcs 2 Pin + 15pcs 3 Pin + 15pcs 4 Pin)

Model: 301 Color: blue; Insulation material: PA66; Pin material: tinned iron; Screw type: M2.5, nickel plated steel
Number of pins: 2/3/4 pin; Pitch: 5mm; For wire size: 14-22AWG
Rating: AC 300V, 16A Frequency: low
Application: crystal oscillator, IC socket, DIY PCB universal board, Dupont wire, digital tube, buzzer, Arduino UNO board, PIC programming unit, AVR ATMEL programming unit, connector suite, USB TO TLL module, power module, LCD module, RS232 TO TLL module.
Package includes: 20 x 2 Pin Screw Terminal Block + 15 x 3 Pin Screw Terminal Block + 15 x 4 Pin Screw Terminal Block

Rank No. #12

Mardatt 32Pcs 9 Type Pluggable Terminal Blocks Connector Socket, 5mm/0.2inch Pitch PCB Mount Screw Male Female Connectors(2/3/4/5/6/7/8/9 Pins)

【What you Get】The phoenix connector assortment contains 9 type of pluggable female and male terminal block: 6 pcs 2 pin terminal block, 6 pcs 3 pin terminal block, 5 pcs 4 pin terminal block, 5 pcs 5 pin terminal block, 2 pcs 6 pin terminal block, 2 pcs 7 pin terminal block, 2 pcs 8 pin terminal block, 2 pcs 9 pin terminal block, 2 pcs 10 pin terminal block, totally 32 pcs. Various type of screw terminal will meet your different demands.
【Product Feature】Rating--300V 8A; Wire range:--28-16 AWG; Pitch- 5.08mm/0. 2 inches; Withstand Voltage--2000v/min.
【Premium Material】Made of high-quality plastic and cooper, featured with good conductivity, effective flame retardant, long service time, safe and reliable. The screw have a better anti-oxidation performance which make it more durable. Repeatedly plug, not easy to deform.
【Easy to Use】Not need to weld. Handy and easy to assemble, solder in easily and tighten very well on the terminated wires. Spiral wire is not easy to take off the line.
【Wide Application】 The PCB terminal connector is ideal for small electronic watches, calculator, general computer, communication electronics device and other electronic equipment.

Rank No. #13

4 Pin RGB Solderless LED Light Strip Connectors Set 10 mm 95 Pieces Including Screw Clips, Cuttable T, L and X Shape PCB Board for SMD 5050

Working condition: our LED light strip connectors are able to stand up to 4 ampere current and 0 - 24V (5V, 12V, 24V) voltage, the heat resistance level is -20℃ - 100℃, so they are suitable for most non-waterproof 4 pin SMD 5050 RGB lights in 0.39 inch/ 10 mm width, and you should pay attention to use them correctly for ensuring safety and extending service life
Cuttable PCB board: the PCB board is cuttable, so you can use a cutting tool to cut T-shaped, L-shaped and X-shaped PCB board into any shape you want to facilitate the connection of various forms of light strips, just use your imagination to DIY a special light strip; Please cut the LED strip according to the cuttable mark when you want to change the shape of PCB board
Easy to install: LED strip connector clip can be easily opened and closed, you can quickly slide RGB strip into the connector clip without any tool, please make sure connector “+ -” polarity in line with “+ “ of strip before you connect it (Note: Do not pry up the metal pins of the connector, otherwise it may cause poor contact)
Widely applicable: the 5050 LED strip connectors are suitable for standard density strips or DIY LED lights, for corner connection, and able to decorate Christmas trees, parties, birthdays, weddings, parties and other scenes according to your own needs
Package includes: you will get 40 pieces 4 pin LED connectors, 10 pieces L-shaped PCB boards, 20 pieces T-shaped PCB boards, 5 pieces X-shaped PCB boards and 20 sets of screw fixing clips, which can meet your different needs in daily life

Rank No. #14

JANDECCN 10Pcs 4 Pin 3.81mm Pitch DIY PCB Mount Screw Terminal Block Connector with 10Pcs 4 Pin Plug

Pitch: 3.81mm; Rated Value: 8A 300V ; Wire Range: 16-28AWG
Withstanding Voltage: AC1500V/1Min; Torque: 0.5 Nm (4.5lb-In)
Stripping length: 7-8mm; Temperature range: - 40 ° C ~ + 105 ° C
JANDECCN terminal blocks are made from high quality plastic PA66 with high temperature resistant and V0 flame retardant. PCB din rail adapter. Easy to install and detach. Just loosen the screws, insert the stripped cable and tighten the screws.
JANDECCN screw terminals can be used for Arduino wire connection. Widely applied in most electronics, communication equipment, instruments, computers, automatic control system, household appliance and warning devices, IC Socket, DIY PCB Universal Board, Power Modules and LCD Modules.

Rank No. #15

Keszoox 15 Pack 5.08mm Pitch Phoenix Type Connector 4 Pin PCB Screw Terminal Block

✔️About the project:These Phoenix connectors are made of advanced materials. They are well made and stable with pure copper metal block and UL 94V0 fireproof plastic shell.
✔️[Specification] Terminal spacing: 5.08mm; Rated voltage: 300V 10A. They are heat resistant, flame retardant and current balanced to ensure no leakage. Low signal loss and high switching frequency
✔️[Quick and Safe Wiring] Can be installed on the 5.08mm-4PIN Phoenix connector, allowing you to easily install and replace printed circuit boards.
✔️[Simplify your wiring] Super fixed, better shockproof design, ensure long-term closed connection and safety and reliability.
✔️[About after-sales service] If you have any doubts, problems or are not satisfied with our products, please feel free to ask us for help, we will listen to your opinions and develop solutions for you within 12 hours.

Rank No. #16

Jienk USB 2.0 Type A Male to 4 Pin Screw Terminal Block Connector, Portable Pluggable Type Adapter Connector Converter 300V 8A(2 Pack)

WIDELY APPLICATIONS: Suitable for U disk, keyboard, mouse, camera, printer, mobile phone and other devices with USB interface. Terminal blocks make it easy to test electronics equipment or power up.
DURABLE: Nickel-plated interface, anti-friction, strong oxidation resistance, effectively reduce resistance. The signal is more stable and has a longer service life.
EASY to USE: No soldering required. Just use a small screwdriver to open up the terminal blocks, slide in your stranded or solid-core wire, and re-tighten. Save you from solder trouble, no need to purchase expensive tool. Great time and money saver.
FLEXBILITY: The terminal block itself is removable from the body. It's more durable than soldering wires onto a connector. Can extend the length of the USB cable,ideal for you electronic DIY projects and test the equipment that with USB interface ports.
All the pins are clearly labeled, which is really nice because we keep forgetting the order.

Rank No. #17

Cermant 20 Set 4 Pin 5.08mm (0.2inch) Pitch Male Female PCB Screw Terminal Block Plug Connector Panel Mount DIY (5.08mm-4P-20Set)

Product Name : PCB Terminal Block;Model : 5.08-4P;Material : Plastic
Rated Value : AC 300V 10A 28-12AWG.
Pin Number : 4 Pin Distance : 5.08mm/0.2".
These PCB screws are snap together well.have a quick release capability.Just need to loosen the screws to land the wires.Use high-quality plastic PA66 high temperature resistant V0 flame retardant,steel screw environmentally friendly electroplating,no slippage.Widely used in electronics,communication equipment,instruments
Package Content: 20 Set x PCB Terminal Block Connector

SaleRank No. #18

20 Pcs LED Tape Light Connectors 4 Pcs L Shape 2 Pin LED Connectors for Strip Lights Right Angle Terminal Block Solderless Adapter Screw Down 8mm Tape to Wire for 5V 12V 24V LED Strip Lights

Rank No. #19

DBParts 10 Sets 4-Pin (4 Pole) 5.08mm Pitch Right Angle Screw Terminal Block Connector PCB Mount DIY

Pitch: 5.08mm
Pin Number: 4
Rated Value: 300V 15A
Wire range: 28-12A WG
Color: Green

Rank No. #20

DBParts 10 Sets 4-Pin (4 Pole) 3.81mm Pitch Right Angle Screw Terminal Block Connector PCB Mount DIY

Pitch: 3.81mm
Pin Number: 4
Rated Value: 300V 8A
Wire range: 28-16A WG
Color: Green

Last update on 2023-08-09 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best 4 Pin Screw Connector?

Do you get stressed out thinking about shopping for a great 4 Pin Screw Connector? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 4 Pin Screw Connector, which is why we have assembled a comprehensive list of the greatest 4 Pin Screw Connector available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 4 Pin Screw Connector that you consider buying. Your questions might include the following:

Is it worth buying an 4 Pin Screw Connector?
What benefits are there with buying an 4 Pin Screw Connector?
What factors deserve consideration when shopping for an effective 4 Pin Screw Connector?
Why is it crucial to invest in any 4 Pin Screw Connector, much less the best one?
Which 4 Pin Screw Connector are good in the current market?
Where can you find information like this about 4 Pin Screw Connector?

We’re convinced that you likely have far more questions than just these regarding 4 Pin Screw Connector, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for 4 Pin Screw Connector, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 4 Pin Screw Connector. Make sure that you are only using trustworthy and credible websites and sources.

We provide an 4 Pin Screw Connector buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 4 Pin Screw Connector currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of 4 Pin Screw Connector has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an 4 Pin Screw Connector?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your 4 Pin Screw Connector.
Customer Ratings: Number ratings grade 4 Pin Screw Connector objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 4 Pin Screw Connector.
Product Quality: You don’t always get what you pay for with an 4 Pin Screw Connector, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an 4 Pin Screw Connector is should be an indication of how long it will work out for you.

We always remember that maintaining 4 Pin Screw Connector information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding 4 Pin Screw Connector is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: Why do you need a 4 pin connector for a reversing camera?

A: The 4 pin connector enables a nice waterproof connection between the 4 pin lead and the camera. The 4 pin leads carry both power and video down the one cable. Exc. VAT : £55.00 This is one of our biggest selling reversing camera and is supplied as standard with a number of our 12/24V reversing camera kits.

Q: What kind of Screws do you use to connect two pieces of wood?

A: One side inch, one side metric, and a hex in the middle— these handy fasteners connect two female-threaded parts, such as coupling nuts, adapting from inch threads to metric. Tighten with a standard wrench. Also known as dowel screws, use these to join two pieces of wood.

Q: What kind of Screws do you use for a barrel?

A: Made from 18-8 stainless steel, they are chemical resistant. Pair these screws with a barrel you already have or couple with a different barrel to create a custom fastener. Made from 18-8 stainless steel, they are chemical resistant. Use these barrels with a screw you already have or pair with a different type of screw to create a custom fastener.