Contents

The Best 500 Watt Amplifier of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best 500 Watt Amplifier of 2023. Check our ranking below.

2,859 Reviews Scanned

Rank No. #1

LEIGESAUDIO 500 Watts MonoBlock Amplifier, Class D, 1 Ohm Stable Subwoofer Amplifiers for Car Audio Speakers

POWER - MAX Power 1Ω：1x2200w @ 1ohm,MAX Power 2Ω：1x1400w @ 2ohm;RMS Power：1x900w @ 1ohm, RMS Power：1x600w @ 2ohm. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to.
CLASS D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it's needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry.
1 Ohm STABLE - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to.
VARIABLE SUBSONIC FILTER WITH LOW-PASS CROSSOVER - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion. Reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
WARRANTY - As long as you purchase through Amazon.com, LEIGESAUDIO provide a comprehensive 3-year VIP online reseller warranty. We strongly encourage professional installation methods to ensure excellent performance and safe functions of this product.

SaleRank No. #2

Skar Audio SK-M5001D Compact Monoblock Class D MOSFET Car Amplifier, 500W

Ultra Compact MOSFET Monoblock Class D Car Amplifier
RMS power @ 1 Ohm: 500 Watts x 1 Channel (14.4v)
Frequency Response: 15Hz - 270Hz
Hi-Level Input Connection: Yes | Signal-to-Noise Ratio (Sensitivity): 85dB
8 Gauge Power and Ground Input Terminals

Rank No. #3

Rockford Fosgate R2-500X1 Prime 500-Watt Mono Amplifier

The R2-500X1 full-range class-D mono amplifier (1.9" x 6.8" x 8.5") is packed with features and performance to deliver power and bass on demand with 500 Watts of RMS power
Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 300 Watts x 1 @ 4Ω OR 500 Watts x 1 @ 2Ω)
Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass
Designed for subwoofers, a variable infrasonic filter and remote level control allows you to tune the bass for the desired level for the music
Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller

SaleRank No. #4

Pyle 500W Karaoke Wireless Bluetooth Amplifier - 4 Channel Stereo Audio Receiver with AUX IN, FM Radio, RCA Subwoofer Speaker OUT, USB, Microphone IN with Echo, 500W Peak Power into 4-8 OHMS - PTA44BT

500 WATT POWER: The Pyle 4 Channel Bluetooth Home Audio Amplifier is perfect for your PA and home theater entertainment. It gives you 500W peak power which can be used for multi speakers with 4-8 ohms impedance allowing you to enjoy high quality audio
BLUETOOTH COMPATIBLE: The professional integrated indoor house stereo receiver is equipped with bluetooth wireless music streaming. Works with today’s latest devices including smartphones, tablets, laptops and computers with hassle free receiver pairing
7 INPUTS: The personal portable digital amp box supports iPod or MP3, USB, micro SD, AUX playback, built in FM radio with digital LCD display, audio input and REC, plus subwoofer output RCA (L/R) connectors, 2 ¼” microphone inputs with echo
TALK OVER BUTTON: The compact speaker amplifier features a MIC talk over function which, when activated, the current music or audio being played will be temporarily halted. This function is used in paging, voice over, and announcements
EQ CONTROLS: The sound amplifying device has crisp buttons for the audio sources and selectors, rotary knob for equalization, mic and master volume adjustments. A remote control is also included in the package for distant audio adjustments

Rank No. #5

Rockville dB12 2000 Watt Peak/500w RMS Mono 2 Ohm Amplifier Car Amp

Rockville dB12 2000 Watt Peak/500 Watt Dyno-Certified RMS Mono 2 Ohm Amplifier Car Amp
Features of dB12: Rockville dB12 2000 Watt Peak/500 Watt Dyno-Certified RMS Mono 2 Ohm Amplifier Car Amp
Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
2 Ohm: 500 Watts x 1 Channel <1% THD+N. - 4 Ohm: 300 Watts x 1 Channel <1% THD+N
Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). - 2 Ohm: 2000 Watts x 1 Channel. - 4 Ohm: 1200 Watts x 1 Channel

SaleRank No. #6

Pyle Wireless Bluetooth Public Address Amplifier - 500W Compact Mini Digital Home Power Audio Sound PA Receiver System w/ 70V 100V Output, Mic Input, Radio, USB, Remote For 4-16ohm Speaker -PMSA126BU

500 watt power: the PYLE multi channel pa amplifier gives your entertainment or PA system a boost! Provides convenient microphone and speaker control W/ 100V, 70V, 16 ohm, 8 ohm, 4 ohm, com speaker outputs. Supports speakers W/ 4-16 ohm impedance
Bluetooth-compatible: the small Professional integrated indoor public address receiver is equipped w/ Bluetooth wireless music streaming. Works w/ today’s latest devices including iPhone, iPad, smart phone, computer W/ hassle-free receiver pairing
8 inputs: The public address amp Supports MP3 digital Audio file playback via USB flash port and SD memory card slot. Features aux 3. 5mm input, RCA Audio inputs, 2 ¼" microphone input jacks, FM radio Antenna input, and 12V DC power input terminals
Siren alarm function: The compact desktop audio source system features integrated button activated siren alarm function which can be used for emergency situations and for capturing the crowd's attention during a presentation or public announcement
E controls: This mini multi channel compact pa receiver box features front panel button control center and digital LCD display. Has crisp buttons, independent audio channel Rotary volume adjustment and also LED Audio output indicator lights

SaleRank No. #7

Pyle 500W Karaoke Wireless Bluetooth Amplifier - 4 Channel Stereo Audio Home Theater Speaker Sound Power Receiver w/AUX in, FM, RCA Subwoofer Speakers Out, USB, Microphone in w/Echo - Pyle PTA44BT.5

500 WATT POWER: The Pyle 4 Channel Bluetooth Home Audio Amplifier is perfect for your PA and home theater entertainment. It gives you 500W peak power which can be used for multi speakers w/ 4-8 ohms impedance allowing you to enjoy high-quality audio
BLUETOOTH-COMPATIBLE: The professional integrated indoor house stereo receiver is equipped w/ bluetooth wireless music streaming. Works w/ today’s latest devices including smartphones, tablets, laptops and computers with hassle-free receiver pairing
7 INPUTS: The personal portable digital amp box supports iPod or MP3, USB, micro SD, AUX playback, built-in FM radio with digital LCD display, audio input and REC, plus subwoofer output RCA (L/R) connectors, 2 ¼” microphone inputs with echo
TALK-OVER BUTTON: The compact speaker amplifier features a MIC talk-over function which when activated, the current music or audio being played will be temporarily halted. This function is used in paging, voice-over, and announcements
EQ CONTROLS: The sound amplifying device has crisp buttons for the audio sources and selectors, rotary knob for equalization, mic and master volume adjustments. A remote control is also included in the package for distant audio adjustments

Rank No. #8

Memphis Audio 500 Watt Mono 1-Ohm Car Stereo Amplifier+Amp Kit (SE2000.1D+RWK41)

Package Includes: (1) Memphis Audio SE2000.1D 500 Watt Mono Amplifier 1-Ohm Car Stereo Amp. (1) Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's
Features of SE2000.1D: Extruded Aluminum Heatsink. Variable Crossovers. Remote Bass Knob (Mono). Subsonic Filter (Mono)
Specifications: RMS POWER 4 ohm (w): 200 x 1. RMS POWER 2 ohm (w): 350 x 1. RMS POWER 1 ohm (w): 500 x 1. Bridged/Mono Power 4 ohm (w): N/A. THD% 4 ohm: <1%. Frequency Response: 20Hz - 250Hz. Dimensions L x W x H: 11.92 x 7.59 x 2.08. Warranty (years): 1 Year. Input Range: 200mV x 8V. Recommended Amp Kit: 8GKIT
Features of RWK41: 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable. 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables. 17’ – 18 Gauge Blue Remote Cable. 17’ – 16 Gauge Clear Speaker Wire. 3’ – 4 Gauge Clear SuperFlex Ground Wire. Gold Plated AGU Heat Resistant Fuse Holder. 60 Amp AGU Gold Plated Fuse. 7’ Split Tube Loom.
Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets

Rank No. #9

Kenwood X502-1 eXcelon 500-Watt @ 2 Ohms Class D Subwoofer Amplifier

Max Power 1000W
Variable Low Pass Filter
Bass Boost
Optional Wired Remote Ready

Rank No. #10

NVX NDA101 500 Watt RMS N-Series Class D 1-Ohm Stable Monoblock Amplifier (CEA-2006 Compliant) with Included Bass Remote Knob

210 watts x 1 channel @ 4 ohms
330 watts x 1 channel @ 2 ohms
500 watts x 1 channel @ 1 ohm
Total RMS Power: 500 watts | 0 to +12 dB bass boost
CEA-2006 Compliant

Rank No. #11

BELVA BB200ABv2 500 Watt Max Class A/B Monoblock Car Amplifier

Class-A/B 2-Ohm Stable Monoblock Amplifier
High level/speaker level inputs
One pair of preamp outputs
Remote bass knob included

Rank No. #12

Skar Audio RP-75.4ABM 500 Watt Full-Range Class A/B 4-Channel Marine Amplifier

500-Watt MOSFET 4-Channel Class A/B Power Marine Amplifier
RMS Power at 2 Ohms: 125 Watts x 4 Channels
RMS Power at 4 Ohms: 75 Watts x 4 Channel
Fully Marini zed with Waterproof Coating on Circuit Board & Rust Proof Painting on Mechanical Case
User Adjustable Controls: Gain, Variable LPF, HPF, Bass EQ Switch (0, +6, +12 dB)

Rank No. #13

Timpano Compact 4 Channel Amplifier Car Audio 500 Watt, 4 x 125 Watts at 2 Ohms, Mini Stereo 12 volts Full Range Class D Amp, Bridgeable Amplifier 4 Channels TPT-500.4

COMPACT DESIGN: Digital class D Brazilian technology allows this amplifier to have a small footprint by integrating a high-speed mosfet power supply with top of line transistors to ensure performance in a small heat sink without compromising performance. Dimensions: 3.93″ depth x 5.02″ width x 2″ height
POWER: This amplifier is designed to run your stereo system with the power it needs to perform! 500 Watts maximum dynamic RMS power output of 4x 125 Watts at 2 Ohms per channel. Its high efficiency rate of 87% provides more power with less battery consumption.
BRIDGEABLE: Double the power output to your speakers by bridging two channels. Minimum impedance of 4 Ohms per bridged channel at output power of 2 x 225 Watts RMS
TECHNOLOGY: A smart electronic 2-way protection circuit protects the amp if it gets too hot or if speakers fail causing a short! Focusing in sound quality, a full range response of 10 to 24,000Hz was used to give the best sound reproduction on this tiny amplifier.
FEATURES: Heavy Duty 10 Gauge power and speaker wire Inputs. Built-in crossover filters for easy tuning! Choose between a fixed HPF at 90Hz or LPF at 90Hz + 45Hz Bass Boost or just turn it FLAT and use your external crossover or DSP settings. It also includes Variable Gain Control. Level controls are not for adjusting volume. They adjust the amount of signal that is coming into the amplifier from your signal source.

Rank No. #14

MRV-M500 - Alpine Monoblock 500W RMS V Power Series Car Amplifier

MRV-M500 - Alpine Monoblock 500W RMS Amplifier
Evolution to Class D digital platform
New snap-on terminal covers for easy installation
Current Protection: Over-Current, Over-Voltage, Under-Voltage and Thermal Protection
Dimensions (WxHxD) in: 7-7/8'' x 2-3/16'' x 7-7/8''

SaleRank No. #15

Pyle Bluetooth Home PA Mixing Amplifier - 500W Home Audio Rack Mount Stereo Power Amplifier Receiver w/FM Radio, Digital LED Display, USB/AUX/Mic, Optical/Coaxial, AC-3, 70V/100V Output - PMX3500PH

500-WATT POWER: The Pyle Home/PA Mixing Amplifier is perfect for your karaoke & home entertainment system. It gives you 500W peak power to be used for speakers w/ 4 ohms impedance allowing you to enjoy high quality amplified audio
6 INPUTS: The digital amp box mixer amplifier supports FM radio, MP3 audio playback & other external devices. It is equipped w/ USB reader, AUX inputs, 2 mic inputs, optical & coaxial digital signal inputs, AC-3 inputs, line out, and 70V/100V outputs
BLUETOOTH-COMPATIBLE: The professional integrated indoor house stereo receiver is equipped w/ bluetooth wireless music streaming. Works w/ today’s latest devices including smartphones, tablets, laptops and computers with hassle-free receiver pairing
FRONT PANEL CONTROL: The compact home theater sound speaker amplifying device features front panel controls w/ digital LED display, AUX audio input selection, rotary control center for mic volume, treble, bass, echo, and master volume controls
RACK MOUNT: High powered home theater pro audio receiver features a universal rack mount design w/ radio antenna. Additional features include MIC 1 & 2 level gain/talk-over control & MIC 1 priority function. Includes remote control and FM antenna

Rank No. #16

MTX Audio THUNDER500.1 Thunder Series Car Amplifier

Class D Topology
Variable LPF
Selectable Bass Boost
Small Foot Print Design
Surface Mount PCB

Rank No. #17

Belva BXA5002 500W Peak BX-Series 2-Ohm Stable Class-A/B 2-Channel Car Audio MOSFET Amplifier with Remote Subwoofer Level Control

📈Max Power Rating: 500 Watts
📈Power Rating: 4 ohms: 125 watts x 2 | 2 ohms: 250 watts x 2
✅Extreme Efficiency: As a Class A/B amplifier, this amp combines the high efficiency of a class A amplifier and lower distortion found in class B amplifiers. The three-way protection circuitry against thermal, overload, and speaker shortages, increases the longevity of the entire system. Combined with the MOSFET transistor, the BX series amps are one of the most efficient amplifiers in its class.
🎛User Control: Belva amplifiers provide a world-class user control experience. The 2-channel and 4-channel models feature a high pass, low pass, and full range filter that allow you to accurately tune your system for optimal sound quality and performance.
🧩One Size Fits All: All BX-Series amplifiers feature both high-level and low-level inputs. High-level (speaker level) inputs accept the signal from the speakers, while low-level (RCA) inputs accept the signal from the pre-amp outputs of the source unit.

Rank No. #18

Crunch Ground Pounder GP-2000.2 2000 Watt 2 Channel Amplifier

2 channels x 1,000 watts @ 2 ohms
2 channels x 500 watts @ 4 ohms
1 channel x 2,000 watts (mono bridged) @ 4 ohms
Operates in stereo, bridged mono, or stereo/bridged mono simultaneously
Variable electronic crossover: 12 dB per octave

SaleRank No. #19

PIONEER 500W Mono Class D AMP 13in. x 10.75in. x 4.5in.

300W RMS x 1 @ 4Ω
500W RMS x 1 @ 2ω
800W RMS x 1 @ 1ω
Free rasp: 10hz–240khz
Signal-to-noise ratio: 100dB

Rank No. #20

Rockford Fosgate P500X1BD Punch 500 Watt Class-bd Mono Amplifier

The Punch P500X1bd is a full chassis (2.38” x 7.76” x 11.03”) mono amplifier optimized for subwoofers only, capable of 500 Watts into a 1-Ohm load
Class-BD technology produces bass more efficiently over traditional amps (RMS Power Output: 150 Watts x 1 @ 4-Ohm OR 300 Watts x 1 @ 2-Ohm OR 500 Watts x 1 @ 1-Ohm)
RCA inputs can accept both Hi and Low level audio signals without the need of a signal converter
Featuring RCA pass-thru outputs, on-board Punch EQ with +18dB boost @ 45Hz, variable 12 dB/Oct Butterworth crossovers, and C.L.E.A.N. Set-up
Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller

Last update on 2023-08-10 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best 500 Watt Amplifier?

Do you get stressed out thinking about shopping for a great 500 Watt Amplifier? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 500 Watt Amplifier, which is why we have assembled a comprehensive list of the greatest 500 Watt Amplifier available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 500 Watt Amplifier that you consider buying. Your questions might include the following:

Is it worth buying an 500 Watt Amplifier?
What benefits are there with buying an 500 Watt Amplifier?
What factors deserve consideration when shopping for an effective 500 Watt Amplifier?
Why is it crucial to invest in any 500 Watt Amplifier, much less the best one?
Which 500 Watt Amplifier are good in the current market?
Where can you find information like this about 500 Watt Amplifier?

We’re convinced that you likely have far more questions than just these regarding 500 Watt Amplifier, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for 500 Watt Amplifier, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 500 Watt Amplifier. Make sure that you are only using trustworthy and credible websites and sources.

We provide an 500 Watt Amplifier buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 500 Watt Amplifier currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of 500 Watt Amplifier has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an 500 Watt Amplifier?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your 500 Watt Amplifier.
Customer Ratings: Number ratings grade 500 Watt Amplifier objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 500 Watt Amplifier.
Product Quality: You don’t always get what you pay for with an 500 Watt Amplifier, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an 500 Watt Amplifier is should be an indication of how long it will work out for you.

We always remember that maintaining 500 Watt Amplifier information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding 500 Watt Amplifier is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: What is the best 4 channel car AMP?

A: The Best 4 Channel Amp on the Market of 2019 1. Blaupunkt 4-Channel Amplifier (Our Top Recommended) 2. Rockford Fosgate R400-4D Full-Range 4-Channel Amplifier 3. Rockford Fosgate R250X4 Prime 4-Channel Amplifier 4. Alpine MRV-F300 4-Channel Car Amplifier 5. Kenwood KAC-M3004 4-Channel Digital Amplifier

Q: Which is 500 watt Bash AMP?

A: The BASH 500 watt digital subwoofer amplifier is a high-performance amplifier m odule that is designed to offer high power output and excellent efficiency. Thanks to its patented digital architecture, it can pr oduce as much power as a traditional class AB amplifier, without the bulk, weight, and excess wasted heat.

Q: What is AMP kit?

A: A good amp kit is made of quality wiring and includes all the basic items you need for most installation – including wiring with enough length. Zip ties help keep the installation neat and hold wiring in place during installation.