The Best Are Truck Cap Parts of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Are Truck Cap Parts of 2023. Check our ranking below.

2,560 Reviews Scanned

Rank No. #1

T-Handle for ARE Pickup Truck Camper Shell Door with 2 Keys

For ARE Brand Camper Shells Rear Door. Turns Clockwise. May Fit Other Makes and Models
Fits on Most V, CX, TW, MX, and Overland Series ARE Brand Camper Shells With One T-Handle on Rear Door. Holes are spaced 1.5" from center of screw hole to center or other screw hole.
Easy to Replace! Durable High Strength Nylon! In Stock!
Original Replacement Parts, Designed to Work Specifically with ARE Brand Toppers. For Tops with Double T-Handle Rear Doors, see our ARE Double T-Handle listing.
Designed to Work with ARE Factory Locking Rods with Square Hole (not included).

Rank No. #2

Truck Upfitters LED 3rd Brake Light Replacement compatible with ARE, Leer, ATC, Astro, Jason & Century Camper Shells & Truck Caps.

WATER VAPOR NOTE: Our brake light is tested to be water tight. However, the adhesive that is used to seal the light contains a slight amount of water / moisture (<1.8%). Therefore, if moisture becomes present inside the lens, it is NOT due to leakage but rather to moisture in the silicone. The moisture will eventually evaporate without harming the light. We are working on reducing the amount of moisture in the glue to avoid this issue.
MEASURE YOUR EXISTING BRAKE LIGHT TO ENSURE FIT. See pictures with dimensions to ensure this will fit your truck camper shell. Not all brake lights are the same!! This is NOT COMPATIBLE WITH ANY Snugtop parts. This will work as a replacement for most leer truck cap third brake lights, most ARE third brake lights, and most Century, Jason, and ATC brake lights.
Improved Design With Durability In Mind! Completely Sealed and Waterproof Circuit Board Ensures Maximum Life! DOT Compliant. Truck Upfitters designed this truck topper led brake light bar to work with various brands. Some include Leer camper shell parts / Leer truck caps, ARE camper shell / ARE topper parts, Century truck topper parts, ATC camper shell lights, and other camper shell brand truck brake lights.
.Ultra Bright 8 LED brake light upgrade compatible with ARE, LEER, ATC, Astro, Jason, or Century Truck Camper Shells. NOT compatible with Snugtop. This camper shell light is a perfect upgrade / replacement for your truck cap brake light. Has more LED lights than most to ensure maximum visbility and redundancy.
Discreet Grey Lens for Cleaner Appearance. LEDs Light Up Solid Red. Small Quick Connect 9mm Plug Fits Through Small Fiberglass Hole In Camper Shell

Rank No. #3

C1609209 16 Inch 38 Lbs Gas Struts 15.7" Spring Shocks for A.R.E Leer Topper Rear Window Camper Shell Truck Cap Snugtop Replacement 2 Pack by PAMAGOO

🔶C16-09209🔶 Extended Length: 15.71", Compressed Length: 9.4", Force 38 lbs Per Strut. Include 1 Pair Gas Struts. It is recommended to use a pair on both sides at the same time. ** Couldn't be compressed by HANDS.**
🔶EASY TO INSTALL🔶 We have Installation Quick Guide and Online support service to guide install. After installation, these lids will lift safely and smoothly using ONLY ONE finger.
🔶APPLICATION🔶 16" 38Lb/189N Gas Prop Shocks will help you support the Camper Shell Rear Window Storage Cover lids and other custom soft equipment.
🔶WHY CHOOSE US?🔶 180,000 times -passed TUV fatigue test. Pamagoo choose special low-temperature-resistant materials, WORKING TEMPERATURE: ❄-40℃~60 ℃/-40℉~140℉
🔶SATISFACTORY SERVICE🔶 We will provide you with professional customer service BOTH before and after your purchase and offer 18-MONTHS support service.

Rank No. #4

C16-09209 16 inch 38Lbs/169N Gas Shocks Struts for Leer are ATC Camper Topper Rear Window Truck Cap Camper Shell Canopy, Pack of 2PCS Vepagoo

🌳15.71 inch 38Lbs/169N Shocks Struts🌳--A NEW PACKAGE will be offered if any quality defects occur. Welcome to Click "Ask Seller" Besides Your Order for In-time Assistance!
🌳15.71 inch 38Lbs/169N Window Struts🌳--Compressed Length (Center-to-Center): 9.4in (239mm), Extended Length (Center-to-Center): 15.7in (399mm), Force: 38 Lbs (169 N) (Per Strut)
🌳15.71 inch 38Lbs/169N Window Struts🌳--Vepagoo gas shock struts fit for Leer/ARE/Tonneau Camper shell rear window topper door Tonneau Cover lift supports RV Truck Car's window and so on.
🌳15.71 inch 38Lbs/169N Window Struts🌳---Interchange Part Number C16-09209. Easy to install, no special tools required.
🌳15.71 inch 38Lbs/169N Window Struts🌳--End Fiting: 10mm Ball Stud Sockets

Rank No. #5

Truck Upfitters' are Replacement Palm Handle for LSII and LSX Tonneau Lid X Series and Z Series Camper Shell Bed Cover with Screw and Truck Upfitters Decal. Molded Plastic Version Only.

Easy To Replace!
Comes With All Parts You See in Pictures
Compatible With Tonneaus with Newer PLASTIC Handle Only (Not Metal Handles)
Compatible With ARE Brand LSII and LSX Tonneau Covers, and X Series or Z Series Camper Shell Models

Rank No. #6

PIT66 LED 3rd Brake Light, Compatible with Truck Cap Topper Leer Are Century LED Recessed 3rd Third Brake Light Lamp AT-LED-36R Red Lens Chrome Housing

APPLICABLE: Compatible with Leer, ARE, Jason and Astro Lights.
Clear Visibility - The PIT66 rear high-mounted brake light not only provides a cool look and excellent illumination, but also improves high recognition.
HIGH QUALITY PRODUCTS: High Quality 3rd Brake light made by OEM approved manufacturers with materials that meet strict OEM requirements.Reference part number: AT-LED-36R, AT-LED-36R-02.
PACKAGE INCLUDES: 1 * Third Brake Light.
EASY TO INSTALL: no special installation skills are required and can be installed successfully in a relatively short time.

Rank No. #7

Mounting Clamps Truck Caps Camper Shell Replacement for Chevy Silverado Sierra 1500 2500 3500, Dakota Ram 1500 2500 3500, F150 F250, Titan, Tundra 4 PCS (Black)

MATERIAL:Made of aluminum,strength,hard to be corroded.
FITMENT:CHEVY:Silverado/Sierra 1500,2500,3500.Silverado/Sierra 07 with Cargo Rail. Dakota.Ram 1500,2500,3500.F150 F250.MITSUBISHI:Raider.Titan.Tundra.
FUNCTION:Designed to mount truck caps on many pick-up truck models.
PACKAGE:Set of 4 black clamps.
BENEFITS:Stay tight all the time.Fit firmly to your truck and cap/lid.No drilling required.

Rank No. #8

QZATTCAEN Pickup Truck Cap Topper Camper Shell Locking T-Handle -with 2 Keys for Most Brands of Truck caps, Toppers, Camper Tops Black Powder Coated Finish-Left Side

[Easy to install] :T-handle design Truck lock designed to installed in a few minutes, dust cover for the keyhole
[Rotation] : 90 degree Counter clockwise; Shaft 5/16" square, 1-5/8" long Counter Clockwise T-Handle Clockwise to lock and Counterclockwise to unlock
]Material] : Heavy Duty Black Powder Coated Finish smooth and durable
[Application]:Camper Shells Pickup truck rear door or side door Replaces most OEM T handle locks on most truck caps.
[Package include] : Black T handle 2 keys and 2 screws Mounting: Blind 1-1/2cc with 3/8" Lugs, Tapped 10-24 x 3/8"

Rank No. #9

15 inch 67Lbs Gas Shocks Struts Hydraulics Piston Lid Lift Support Springs Rod for RV Bed Door Leer Snugtop are Camper Topper Rear Window Truck Cap Canopy Cargo Door Prop and Other DIY Project

【PACKAGE CONTENT】-- 2 × 15" 67Lbs Gas Struts; 4 × mounting brackets; 16 × screws.
【GAS SPRING PARAMETER】FORCE: 67 Lbs Per Strut, LENGTH (Center-to-Center): 14.96" , COMPRESSED LENGTH (Center-to-Center): 9.06" .
【TIPS】As the Upper Mounting Point, it should be 4-5 inch, 5.5 inch maximum towards the hinge on the lid. While If you want to adjust the Upper Mounting Point, just do as the Product Descripition shown, or Click "Ask Seller" Besides Your Order for In-time Assistance.
【APPLICATION】Suitable for ARE, ATC, Snugtop, Leer Camper Shell/Truck Cap Rear Door Home-built Window Storgage Box Lid and other DIY project.
【100% GUARANTEE】Welcome to Click "Ask Seller" BESIDE YOUR ORDER for In-time Assistance if any problem occurs.

Rank No. #10

are Truck Cap Topper Handle Replacement Keys from 0001 Thru 0020 A.R.E. Topper Cover Keys 2 Cut Keys. (0004)

ARE Truck Cap Topper Handle Replacement Keys From 0001 thru 0020 A.R.E. Topper Cover Keys 2 Cut Keys. By Ordering These Keys You Are Stating You Are The Owner.
Just Match Your Key Number From 0001 To 0020
By Ordering These Keys You Are Stating You Are The Owner.
Will Work Out of The Envelope Just Match Your Key Number From 0001 To 0020
A.R.E. Gemtop Truck Toppers Tonneau Covers ARE

Rank No. #11

C1603795 12" 24Lbs/ 107N Gas Struts Spring Shocks Lift Support for are ATC Snugtop Leer Camper Shell Truck Canopy Topper Rear Window Truck Cap Door Toolbox Lid 2pcs by IAQWE

[12" GAS STRUTS PARAMETER]: Force: 24Lbs/107N 12 Inch per Strut, a pair of 2 shocks. Extended Length: 12.2”, Compressed Length: 8.3”. Ball Joint Diameter: 10mm Nylon Ball Sockets.Can not compress directly by your hands before installing.🚀🚀🚀
[24LBs GAS STRUTS]: Suitable for Camper Shell, ARE ATC Snugtop Leer Truck Topper Rear Window, Truck Cap Door, Toolbox, Truck Topper Bed, Truck Canopy, Cabinet and so on. Scope of application: 10-25lbs. Your DIY can create more possibilities for Gas Struts, looking forward to your DIY creations! 🚀🚀🚀
[CAMPER SHELL GAS SHOCKS]: Interchange number: SG459002, C16-03795, C1603795. Package include Struts* 2, Installation Guide* 1. 🚀🚀🚀
[PREMIUM 12 INCH GAS STRUTS]: Our products are suitable for various harsh weather environments such as outdoor heavy rain and minus 104℉. As the best and reliable gas spring manufacturer, IAQWE will always stand behind you to provide you with the strongest support. 🚀🚀🚀
[GAS STRUTS SUPPORT]: 36 Months Replacement Support. Any issues, just mail us via Amazon, and we will solve for you within 24HRS.☎️☎️☎️

Rank No. #12

16" 28Lbs/127N Gas Spring Shocks Struts Lift Support for Hydraulics Piston Lid Stay for Camper Shell Leer ARE Truck Topper Rear Window Truck Cap Canopy Door

★Must-Read Parameter -- Compressed Length (Center-to-Center): 9.4in (239mm). Extended Length (Center-to-Center): 15.7in (399mm). Force: 28 Lbs/127N per Strut.
★Where you use them? -- 16inch 28Lbs/127N gas shock struts compatible with Leer ARE SnugTop camper shell truck topper rear window, Truck Pickup Cab Canopy Door and other custom Applications.
★NOTE -- Please confirm the length before ordering. Measure the distance from the center of the socket to the center of the socket.
★About Installation -- Easy to install, no special tools required. End Fiting: 10mm Ball Stud Sockets.
★Our Commitment -- Welcome to Click "Ask Seller" BESIDE YOUR ORDER for In-time Assistance if any problem occurs.

Rank No. #13

RecPro Truck Cap Lock T-323 Window Handle for LEER A.R.E. Bauer K127 Cylinder Key | Tonneau Cap Cover Lock T-323 Handle for LEER Century Bauer K127 Cylinder Key (1 Pack)

Dimensions: 1 3/8"W x 3 1/2"H x 4"D
Similar in function to a doorknob
Comes with key
Does not come with screws
Universal Handle, no specified left or rights

SaleRank No. #14

GRAND ORANGE LED New Truck cap Compatible with Topper, Leer, ARE,CENTURY Clear Third Brake Light Mount 3rd Brake Lamps

Replacement third brake light.
10" Recess Mount Compatible with Leer, ARE, Jason and Astro.
Sealed lamp construction. High impact polycarbonate lens
Automotive grade tape for screwless installation and assures that the lamp "stays put"
Super bright LEDs extend lamp life and reduce heat, while meeting SAE ratings, With ONE YEAR WARRANTY

Rank No. #15

2 Truck Upfitters 16" Gas Props (15.7" Extended, 9.4" Compressed, 45 pounds of Pressure ea) for are, ATC, Snugtop, Leer Camper Shell/Truck Cap Rear Door. Measurement Required! Incl 4 Ball mounts!

CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
Truck Upfitters Pair of 45 pound (each) gas struts. 15.7" extended length and 9.4" compressed length. This size of door shock absorber is for medium height and weight rear or side camper shell doors. Each canopy shock has 45 lbs of pressure, for a total of 90 lbs of pressure. Please note that this does not mean that it can lift something that is 90 lbs. the typical hinged-style door weight for this prop is approximately 60-80 lbs, including the weight of the camper shell locks and keys.
These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
Equivalent to Suspa # c16-23993 or Stabilus #14269. These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!

Rank No. #16

Mounting Clamps Truck Cap Topper Camper Shell Heavy Duty TL-2002, 4Pcs Universal Truck Topper Clamp Camper Shell Compatible with Toyota Ford Dodge Chevy

▊ 2" throat Depth,Max Clamp Thickness 1 9/16" thick,Clamp is 1.125" wide
▊ No-drill installation - Place clamp around bed rail and truck topper - Tighten included carriage bolt
▊ Designed for mounting truck caps with fiberglass or aluminum rails,Fits multiple makes and models
▊ Designed For Mounting Truck Caps Or Covers With Fiberglass Or Aluminum Rails
▊ C-clamps help you secure a hard tonneau cover or camper shell to the side rails of your pickup truck bed

Rank No. #17

RecPro Truck Cap Lock T-500 Side Access Window Handle for LEER A.R.E. Bauer K127 Key | Tonneau Cap Cover Lock T-500 Handle for LEER Century Bauer K127 Cylinder Key (5 Pack)

Similar in function to a doorknob
Comes with key
Comes with installation materials
Dimensions: 2 3/4”Wx1”Hx3 1/4”D
Universal installation, can be installed on either right or left side.

Rank No. #18

ARANA C16-09209 16 inch 38 Lbs (169 N) Gas Struts Spring Shocks 15.7 inch C1609209 Lift Support for Truck Cap Leer Topper Window are Canopy Pickup Bed Truck Topper Camper Shell, 2 Pcs

✅ Interchange Number:C1609209,C16-09209, SE150P40M10;
✅ 16 inch 38Lb Gas Struts -- Extended Length (Center-to-Center): 15.7in (399mm); Compressed Length (Center-to-Center):9.4in (239mm); Force: 38 Lbs (169 N) (Per Strut), 2 Struts per set, not 1;
✅ C1609209 16 inch Gas Spring -- ARANA C1609209 struts could be used as the replacement parts for Truck Cap Leer Topper Window ARE Canopy Pickup Bed Shock Strut are Truck Topper Camper Shell Parts Gas Springs, etc.
✅ 16" 38lb Camper Shell Gas Shocks -- Please confirm the Interchange Number of your old struts if you use the struts as the replacement, and re-check the length before purchasing to avoid buy wrongly;
✅ 18 Months Support-- If any questions or dissatisfaction before/after purchasing or need installing/using guide, please message ARANA directly to let us provide in-time assistance to you!

Rank No. #19

C1620651 18.5" 40 Lb Gas Strut Shock Spring Lift Support for Leer ARE ATC Camper Topper Rear Window Truck Cap Camper Shell Canopy, Pack of 2PCS.

🌳18.5 inch 40Lbs/178N Shocks Struts🌳--A NEW PACKAGE will be offered if any quality defects occur. Welcome to Click "Ask Seller" Besides Your Order for In-time Assistance!
🌳18.5 inch 40Lbs/178N Window Struts🌳--Compressed Length (Center-to-Center): 10.7in (275mm), Extended Length (Center-to-Center): 18.5in (475mm), Force: 40 Lbs (178 N) (Per Strut)
🌳18.5 inch 40Lbs/178N Window Struts🌳--Vepagoo gas shock struts fit for Leer/ARE/Tonneau Camper shell rear window topper door Tonneau Cover lift supports RV Truck Car's window and so on.
🌳18.5 inch 40Lbs/178N Window Struts🌳---Interchange Part Number C1620651. Easy to install, no special tools required.
🌳18.5 inch 40Lbs/178N Window Struts🌳--End Fiting: 10mm Ball Stud Sockets

Last update on 2023-08-10 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Are Truck Cap Parts?

Do you get stressed out thinking about shopping for a great Are Truck Cap Parts? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Are Truck Cap Parts, which is why we have assembled a comprehensive list of the greatest Are Truck Cap Parts available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Are Truck Cap Parts that you consider buying. Your questions might include the following:

Is it worth buying an Are Truck Cap Parts?
What benefits are there with buying an Are Truck Cap Parts?
What factors deserve consideration when shopping for an effective Are Truck Cap Parts?
Why is it crucial to invest in any Are Truck Cap Parts, much less the best one?
Which Are Truck Cap Parts are good in the current market?
Where can you find information like this about Are Truck Cap Parts?

We’re convinced that you likely have far more questions than just these regarding Are Truck Cap Parts, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Are Truck Cap Parts, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Are Truck Cap Parts. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Are Truck Cap Parts buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Are Truck Cap Parts currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Are Truck Cap Parts has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Are Truck Cap Parts?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Are Truck Cap Parts.
Customer Ratings: Number ratings grade Are Truck Cap Parts objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Are Truck Cap Parts.
Product Quality: You don’t always get what you pay for with an Are Truck Cap Parts, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Are Truck Cap Parts is should be an indication of how long it will work out for you.

We always remember that maintaining Are Truck Cap Parts information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Are Truck Cap Parts is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

The Best Are Truck Cap Parts of 2023 – Reviewed and Top Rated

How Do You Buy The Best Are Truck Cap Parts?

Related Post: