The Best Slide Hammer Bearing Puller of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Slide Hammer Bearing Puller of 2023. Check our ranking below.

2,451 Reviews Scanned

Rank No. #1

GEARWRENCH 10 Way Slide Hammer Puller Set - 41700D

Provides a wide range of puller applications such as: flange type axles, oil seals and other press fit parts
Jaws can be set up for 2 or 3 jaw
Includes slide hammer, 2 yokes, center bolt, 2 flanges, adapter set, legs, & screws

Rank No. #2

Orion Motor Tech Blind Hole Collet Bearing Race and Seal Puller Extractor Kit, Slide Hammer Pilot Insert Inner Internal Bearing Removal Tool Set, 16PCS

1.16-PIECE SET: This blind bearing puller set by Orion Motor Tech includes a slide hammer, counterstay puller, spare pin bolt, 3 screw adapters, and 10 split collets to get all your work done on parts from 1/4 to 2-1/3 inch diameter (6-59 mm)
2.HEAVY-DUTY CONSTRUCTION: These wheel bearing removal tools are made from AISI 1045 medium carbon steel forged and galvanized for long-term durability under even punishing use; the collets in particular are chromoly steel to handle even the most stubborn blind bearings and bushings without trouble
3.WIDE APPLICATION: This internal bearing puller set's expandable collets and threaded screw adapters remove tight and jammed axles, bearings, and bushings on a wide variety of vehicles without damaging the removed parts
4.EASY TO USE: For most parts, just fit the appropriate collet, lock it into the inner race, and pull the slide hammer's weight back to easily knock out the bearing or bushing; for tighter or more delicate operation, the counterstay can be slowly tightened to more carefully extract the part
5.BLOW-MOLDED CASE: The custom blow-molded case keeps everything organized and easy to carry or store as needed

Rank No. #3

VCT Rear Axle Bearing Remover Puller Slide Hammer Set Remove Semi-Floating

EASY TO USE: Slide flat end of puller through center of bearing and flat against backside of bearing, then slide washer down the center of the shaft against front side of bearing and tighten the nut on smaller end of puller, then thread a slide hammer (not included) to the puller and slide hammer back and forth until the bearing comes out; The washer captures the bearing firmly to distribute the applied force over the entire bearing and prevent damage
Use the VCT Pneumatic SAE Standard Rear Axle Bearing Puller 3-Piece Service Set – Domestic Car Vehicle Bearings Removal Tool Kit to service semi-floating rear axle bearings on your vehicle; These tools make the job simple and prevent damage to your bearings when pulling; Much easier than claw-type axle bearing pullers that slip off and chew up the old bearings; For removal only, not intended for installation
FITS YOUR CAR: Standard SAE sizes work for most American domestic makes and models; Set includes the following sizes to fit main bearing tube – 1 inch to 1-7/8 inches, 1-5/16 inches to 2-3/8 inches, and 1-3/8 inches to 2-7/8 inches; Sizes permanently laser-etched on tool for easy identification; Each tool fits a basic slide hammer with a 5/8-inch x 18 thread pitch
EASY STORAGE: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization
PACKAGE CONTENTS: Package includes (3) rear axle bearing removers and (1) carrying case for your convenience; Slide hammer not included

SaleRank No. #4

OMT Slide Hammer, 9-Way Internal/External Slide Hammer Puller Set - Pulls Hubs, Rear Wheel Axle Shafts, Bearings, Bushings, Seals, Retainers

VERSATILE PULLER SET: The Orion Motor Tech 9-Way Slide Hammer Puller Set with 5 lb slide hammer is ideal for many pulling applications like flange-type rear axles, most front-wheel drive hubs, pulling dents, and other press-fit parts (bearings, bushings, gears, pulleys, etc.).
INTERNAL & EXTERNAL JAWS: Includes 2-jaw and 3-jaw pullers for internal and external work to provide a variety of combinations to pull bearing, gears, and seals. 2 and 3-way cross blocks and cone-type puller provide the perfect jaw configuration for most jobs.
MULTI-FUNCTION: Includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements. All the tools are contained in a heavy-duty organizer case to extend the life of your tools.
ULTIMATE DURABILITY: Built to last with rugged carbon steel alloy and chrome vanadium steel components, our tool kit can withstand accidental drops and years of heavy use without cracking or rusting.
ALL-IN-ONE TOOL SET: Complete 15 piece set for a wide range of pulling applications, including: Slide Hammer, Puller Head, Pulling Adapter, Cross Block, Internal/External Puller Jaw, Hex Jaw Nuts & Screws (3), Vise-Grip Adapter (single-lead thread), Seal Hook, 3-Way Puller Head, Cone, Self-Tapping Screw and Retainer.

Rank No. #5

ATPEAM 9-Way Slide Hammer Puller Set | Wrench Adapter Axle Bearing Hub Auto Set, Axle Front Rear Wheel Bearing Dent Hub Gear Puller Remover Set

Extra Durable: The ATPEAM slide hammer puller set is made of drop forged steel pullers and fully hardened shaft and accessories, this will pull the hardest wheel bearing and wheel hub out of the tight position, and make sure this tool set a longer lifespan.
A Complete Puller Set: 1x shank and T-bar assembly, 1x 4.8 lb. sliding hammer weight, 1x cross nut, 2x hub grappler adapter flanges, 1x large forcing screw, 1x cone, 1x 3-way puller head, 1x vise grip adapter with double lead thread, 1x seal hook adapter, 1x dent puller retainer, 1x self-tapping screw, 3x 5 inch (127 mm) internal and external jaw bars, 3x hex jaw nuts, 3x hex head cap screws, and 1x blow molded storage case.
Auto Body Repair Tool Set: The slide hammer bearing puller kits are body shop tools that are used to aggressively remove tightly jammed parts or dents; slide hammers consist of a long metal shaft with an attachment point at one end, a heavyweight that slides along the shaft, and a handle with a stop on the opposite end; this hammer tool slide kit includes 2 jaws and 3 jaw internal and external pullers, rear axle bearing puller tool, locking plier adaptor, puller hook, and auto dent puller tool
Wide Application: The 9-way slide hammer puller set with 4.8 lb slide hammer is ideal for a variety of pulling applications, including flange-type rear axles, most front-wheel-drive hubs, pulling dents, and other press-fit parts (bearings, bushings, gears, pulleys, etc.).
Blow Mold Case: This bushing removal tool is packed in a heavy-duty, blow-molded case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set.

SaleRank No. #6

Powerbuilt Master Axle Puller Tool Set, Remove Car Front and Rear, Bearings and Seals, Vehicle Repair 21 Piece Kit - 648611, Silver

Made to be the most reliable tools in the market today
Tool solutions for most all situations
Built to exceed tool standards
Removes front and rear axles, axle bearings and seals from front and rear wheel drive vehicles
Can also be used as a slide hammer for dent pulling and gear pulling duty

Rank No. #7

DAYUAN Blind Hole Collet Bearing Puller Set,9 pcs 8-32mm Inner Bearing Extractor Kit with Slide Hammer Insert Bearing Removal Tool

Perfect for pulling jobs requiring an internal pull, such as pilot bearings
Select the appropriate sized collet by comparing it with the application
Includes 8 expandable collets, Fitting a wide range of applications
Insert collet, expand it to fit the hole, and attach the slide hammer assembly
Slide Hammer Shaft: 1.2ft Long (390mm)

Rank No. #8

OTC 4579 9-Way Slide Hammer Puller Set , Black

Pulls flange-type rear axles and most front-wheel drive hubs
Internal and external jaws provide a variety of combinations to pull bearings gears and seals
Two- and three-way cross blocks and cone provide the perfect jaw configuration for most jobs
Includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling
Designed for use with other OTC 5/8 inch-18 thread slide hammer attachments

Rank No. #9

BOOTOP PIN Slide Hammer Puller Set, Large Slide Hammer, Hub Hammer, 9 Way Slide Hammer Puller Set, Wheel Hub Puller Tool, Slide Hammer Bearing Puller

【Wide Application】Slide hammer puller set provides a wide range of puller applications including flange type axles, oil seals, most front-wheel drive hubs, pulling dents and other press fit parts like bearings, bushings, gears, pulleys, etc. Hub hammer simple operation and time saving to remove and install the axle and hub bearings.
【Multifunctional Slide Hammer Kit】Slide Hammer Set, Jaws can be set up for 2 or 3 jaw internal or external pulling jobs; Yoke fits axles with 4, 5, or 6 Studs in a circle from 4-1/2" To 5-1/2"; 5lb Slide hammer has a 5/8-18 thread; Grip wrench adapter and dent puller attachment for sheet metal or other unique pulling requirements; Pulls rear axle on cars and 1/2-ton trucks with flange-type axles.
【Premium Quality】Hammer slide kit Built to last with rugged carbon steel alloy and chrome vanadium steel components, corrosion proof and super durable from severe sliding movement. Our slide hammer bearing puller set can withstand accidental drops and years of heavy use without cracking or rusting.
【Package include】8 Way Slide Hammer Puller Set including: Slide Hammer, Puller Head, Pulling Adapter, Cross Block, Internal/External Puller Jaw, 3-Way Puller Head, Hex Jaw Nuts & Screws (3), Vise-Grip Adapter (single-lead thread), Seal Hook, Cone, Self-Tapping Screw and Retainer. All the tools are contained in a heavy-duty organizer case to extend the life of your tools.
【Warranty Policy】:180 Days Warranty. Feel free to contact us by emails if you have any problems,we'll take care of it in 24 hours.

Rank No. #10

ABN Slide Hammer Puller Set - 5 lb Slide Hammer Axle and Hub Puller and Dent Remover Unit Auto Body Hammer Tool

[Versatile Slide Hammer Set] Whether pulling out deep dents on metal surfaces or removing mechanical, press-fit parts, the ABN 5 Pound Slide Hammer Bearing Puller Set works wonders; Lightweight dent puller slide hammer tool ensures maximum pull power
[Fits Your Needs] Each slide puller set includes a 23-inch (58.4cm) T-style slide hammers bar, a 5 lb hammer weight, and a nut; 3-inch machined threaded section fits your internal or external 5/8-inch x 18 threaded adapters (not included)
[Easy to Use] Once attachment has been connected and is in place, slide the large slide hammer close to the end of the CV joint puller tool; Then, pull back on the T handle, while you snap the weight towards the handle; Weighted slide hammer adds torque and pull-power
[Safe for Your Vehicle] Slide hammer and attachment design focused the added torque to a stable area to prevent damage that can happen when trying to remove press-fit parts
[Built to Last] Hardened shaft and chrome-plating ensure optimum strength and resistance from rust, while the 4.7-inch (12cm) T-shaped handle provides a proper grip for less user fatigue; 5lb. (2.3kg) slide hammer is a 5.5-inch (14cm) drop-forged steel weight that features a dumbbell style grip for security

Rank No. #11

OEMTOOLS 27059 Pilot Bearing Puller Attachment For Slide Hammer, 2-Jaw Puller Pilot Bearing Removal Tool, Fits 5/8 x 18, 3/4 x 16 Thread Rods, Slide Hammer Extension Compatible With OEMTOOLS 27033

Adaptable Design: Fits 5/8" x 18-thread and 3/4" x 16-thread pulling rods; Seal puller removes bearings, bushings, and other press-fit parts from a shaft without causing damage to the components
Precision Bearing Removal: Two-jaw puller tool inserts perfectly behind bearings for safe extraction using a light duty slide hammer; Minimize hassle and reduce risk of injury or damage
Broad Applications: These small slide hammer attachments are essential puller tools for mechanic shops and garages that service clutches and transmissions
Slide Hammer Ready: Ensure smooth and effective operations with a complete slide hammer puller set; Designed for optimal performance with OEMTOOLS 27033 Slide Hammer
Durable Make: Each slide hammer bearing puller is crafted with premium materials for longevity; Dependable and resilient for repeated bearing separator performance

SaleRank No. #12

8MILELAKE 9 Way Slide Hammer Puller Axle Front Rear Wheel Bearing Dent Hub Gear Puller Remover Set

Pulls flange-type rear axles and most front-wheel drive hubs
Internal and external jaws provide a variety of combinations to pull bearings gears and seals
Two- and three-way cross blocks and cone provide the perfect jaw configuration for most jobs
Includes a grip wrench adapter and a dent puller attachment for sheet metal
or other unique pulling requirements

SaleRank No. #13

GEARWRENCH 3 Pc. Rear Axle Bearing Puller Set - 41710

Three pullers designed to make the removal of semi-floating rear axle bearings easier
1" x 1-7/8" puller
1-5/16 " x 2-3/8" puller

Rank No. #14

8MILELAKE 16pc Slide Hammer Puller Set, 2/3 Jaw External Internal Axle Seal Bearing Hub Puller Remover

Slide Hammer And Dent Puller Kit
Combination Puller With 5LBS Malleable Steel
Drop Forged Steel Pullers And Attachments
Converts Into A 2 Or 3 Jaw Internal Or External Puller For Reaching Hard To Reach Areas
Plastic Carry Case for Storage

Rank No. #15

kauplus 3 Jaw Gear/Bearing Slide Hammer Puller Set, Internal & External Puller

Multiple functions designed utilized to pull out the gears, bearings, grease retainers and oil seals and flywheel etc…
Drop-forged carbon steel construction, three-jaw with precise machined claws for secure grip on the gears. Set contains 1 pc 3lb. Slide Hammer, 1 pc convex screw connection, 2 pcs Int. triple puller, 1 pc Ext. triple leg puller
Set contains: 1 pc 3lb. Slide Hammer, 1 pc convex screw connection, 2 pcs Int. triple puller, 1 pc Ext. triple leg puller
Internal triple puller capacity: 50mm to 150mm
External triple leg puller capacity: 40mm to 80mm

Rank No. #16

Alltooetools 16PCS Blind Hole Pilot Bearing Internal Extractor Puller W/Slide Hammer Removal Tool Kit

【Applicable】Alltooetools Blind hole pilot bearing internal extractor puller w/ slide hammer removal tool kit ideal for pulling jobs,against the bearing for pulling out evenly without damage the parts, and perfect for professional and DIY use.
Constructed of a strong,durable chrome molybdenum steel,the bearing extractor tool is sure to pull even the toughest wheel bearing and bushings from tight positions. This blind internal bearing puller set has a long steel rod and a T-bar handle.
Alltooetools tools has 10 different collets, split collet type collets are made from chrome molybdenum steel turn and they expand to grip the inner bearing race, fit a wide range of applications.
【Feature】 Include: 1 x sliding hammer, 1 x 2.5 jaws puller, 3 x screw adaptors, 1 x counter stay puller. Thread: M10 x 1.5, M10 x 1.5 to M8 x 1.25, M10 x 1.5 to M6 x 1.0. 10 x Collects (segment grip type): 8-11mm, 12-17mm, 18-23mm, 24-29mm, 30-34mm, 34-38mm, 39-43mm, 44-48mm, 49-53mm, 54-58mm.

Rank No. #17

OEMTOOLS 37191 9 Way Slide Hammer Puller, Axle Puller Slide Hammer, Slide Hammer Hub Puller, Use with 5/8 Inch x 18 Thread Slide Hammer Attachments

Used For: Slide hammer kit pulls flange-type rear axles and most front-wheel drive hubs; Internal and external jaws pull bearings, gears, and seals; Dent puller helps remove dents
Easy to Use: Construct the configuration required for the job and attach it to the part of the vehicle you’re working on; Pull the slide hammer back until detached
Configurations: The cross blocks allow you to make structures such as an internal 3-jaw puller, external 3-jaw puller, internal 2-jaw puller, and external 2-jaw puller
Convenient Carry: The pieces in this slide hammer and puller set are housed in a durable carrying case; You can organize your pullers and easily transport them to any job
Set Includes: Grip wrench adapter, slide hammer, dent puller, puller hook, locking pliers adapter, front hub puller, rear axle puller, and both 2- and 3-way cross blocks for jaws

Rank No. #18

8MILELAKE Rear Axle Bearing Puller Extractor Installer Set Axle Bearing Removal Remover Tool Kit

[APPLICATION]: This rear axle bearing puller can help to pull out semi-floating rear axle bearings quickly and effectively.
[EASY TO USE]: The washer of the axle bearing puller can captures the bearing firmly to distribute the force to the whole bearing, can avoid damage of the bearings and case.
[DURABLE MATERIAL]: The rear axle bearing removal tool is constructed from heavy duty cast steel, which has good strength and durability, can provide long service life.
[SIZE]: The bearing puller remover set includes fittings for main bearing tube: Small: 1" to 1-7/8", Medium: 1-5/16" to 2-3/8", Large: 1-3/8" to 2-7/8".
[PACKAGE]: It comes with a plastic carry case, for easy transportation, safe storage, and quick organization.

Rank No. #19

WINMAX TOOLS AUTOMOTIVE 18 Pc Heavy Duty Axles Slide Hammer Dent Panel Bearings Gears Seals Puller Set

1 Year Warranty
This professional quality Slide Hammer Puller kit is ideal for use within the automotive industry for pulling bearings, gears and front wheel drive axle shafts.
This heavy duty slide hammer has a 5 lb. hammer to pack real punch. The slide hammer puller set pulls flange-type rear axles and most front-wheel drive hubs and the internal and external jaws provide a variety of combinations to pull bearings, gears and seals. The pack contain versatile puller assortment to let you handle all kinds of pounding and pulling operations.
Accessories Included ·Slide hammer, ·2 and 3 jaw puller yokes, ·Internal/external puller arms, ·Wheel/axle puller yoke, ·Dent puller hook, ·Dent puller screws (large and small), ·Adapters and hardware, case
Features/Specifications ·Material: steel, heat treatment ·5 lb. chrome plated steel slide hammer ·T-handle for secure grip ·Chrome-plated shaft for smooth operation ·Combination puller with 5-lb malleable steel slide hammer. ·Drop forged steel pullers and attachments fully hardened shaft and accessories. ·Converts into a 2 or 3 jaws internal/external puller for reaching right areas. ·Packed in a sturdy carry case

Rank No. #20

ReluxGo Inner CV Axle Puller Removal Tool with 5/8"-18 Slide Hammer & Adapter, Slide Hammer Attachment Bearing Puller Set with 63mm 48mm CV Joint Fork Adapter, Front Wheel Drive Axle Pulley Attachment

Wih 63mm 48mm Joint Fork: This slide hammer bearing puller set includes opening 63mm and 48mm CV joint fork removing adapters, the CV joint fork is threaded internally, and the slide hammer stick is threaded externally. The joint fork could fit on the slide hammer stick, 63mm and 48mm are suitable for most vehicle models and have a wide range of uses.
Easy to Use: Attach the CV joint fork removing adapter to your slide hammers with 5/8-inch x 18 threads, then position the adapter around the shaft behind the inner boot. Use the slide hammer to create torque to pull out the axle. Easy, yet powerful.
Upgrade Design: This CV joint axle removing tool is easier to pull the old stubborn CV axle and install the new axle without damaging the expensive aluminum transmission cases and other parts.
Premium Material: This CV axle removal tool is made of high-duty steel, heat-treated, sturdy and durable, corrosion resistant, wear resistant, with reliable use and long service life.
Kit Includes: This slide hammer puller set includes slide hammer x 1, 48mm CV joint fork x 1, 63mm CV joint fork x 1, matching nut x 1, gloves x 1.

Last update on 2023-08-04 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Slide Hammer Bearing Puller?

Do you get stressed out thinking about shopping for a great Slide Hammer Bearing Puller? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Slide Hammer Bearing Puller, which is why we have assembled a comprehensive list of the greatest Slide Hammer Bearing Puller available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Slide Hammer Bearing Puller that you consider buying. Your questions might include the following:

Is it worth buying an Slide Hammer Bearing Puller?
What benefits are there with buying an Slide Hammer Bearing Puller?
What factors deserve consideration when shopping for an effective Slide Hammer Bearing Puller?
Why is it crucial to invest in any Slide Hammer Bearing Puller, much less the best one?
Which Slide Hammer Bearing Puller are good in the current market?
Where can you find information like this about Slide Hammer Bearing Puller?

We’re convinced that you likely have far more questions than just these regarding Slide Hammer Bearing Puller, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Slide Hammer Bearing Puller, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Slide Hammer Bearing Puller. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Slide Hammer Bearing Puller buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Slide Hammer Bearing Puller currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Slide Hammer Bearing Puller has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Slide Hammer Bearing Puller?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Slide Hammer Bearing Puller.
Customer Ratings: Number ratings grade Slide Hammer Bearing Puller objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Slide Hammer Bearing Puller.
Product Quality: You don’t always get what you pay for with an Slide Hammer Bearing Puller, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Slide Hammer Bearing Puller is should be an indication of how long it will work out for you.

We always remember that maintaining Slide Hammer Bearing Puller information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Slide Hammer Bearing Puller is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

The Best Slide Hammer Bearing Puller of 2023 – Reviewed and Top Rated

How Do You Buy The Best Slide Hammer Bearing Puller?

Related Post: