Contents

The Best 3 Axis Stepper Motor Driver of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best 3 Axis Stepper Motor Driver of 2023. Check our ranking below.

2,950 (random number) Reviews Scanned

Rank No. #1

STEPPERONLINE 1 Axis Stepper CNC Kit 1.9Nm(269oz.in) 3.0A Nema 23 Stepper Motor & Driver

1 x Digital Stepper Drive 1.0-4.2A 20-50VDC for Nema 17, 23, 24 Stepper Motor
1 x Nema 23 Bipolar 1.8deg 1.9Nm (269oz.in) 3.0A 3.36V 57x57x76mm 4 Wires

Rank No. #2

CNCTOPBAOS 3 Axis USB CNC Controller Kit,Nema23 Stepper Motor 425oz-in 3A 112mm,FMD2740C Driver 4A,USB Interface Card USBCNC Control Breakout Board,36V Power Supply CNC Router Machine Kit

♞【Nema23 Stepper Motor】Step Angle: 1.8°; Current: 3.0A; Holding torque: 425oz-in/ 280Ncm; Shaft: Dual Shaft,Shat diameter: 8mm; Wirings: "A+"=Red / "A-"=Green / "B+"=Yellow / "B-"=Blue
♞【FMD2740C Driver】Input Voltage: DC18-50V; Current: 1.4A-5.6A;Subdivision precision: 400,800,1600,3200,6400,12800,25600,1000,2000,4000,5000,8000,10000,20000 and 25000 optional
♞【4 Axis USB CNC Breakout Board】Card input voltage: 15-36VDC; With remote hand control; USB port,only support USBCNC Software,with a CD,you can download the manual,software and registration code.Support limit switch;0-10V speed control signal,external pause and reset interface etc
♞【400W 36V 11A DC switching power supply】Please flip the side input voltage selector switch to choose the input power supply,support input voltage : AC110V-120V or AC220V-240V;
♞【Support computer system 】Support Win XP/7/8/10 system,if you can not get the activation code on Win 10 or can not get the registration code from the CD,pls let us know,we will help you to solve it and send you the registration code.

Rank No. #3

HiLetgo TB6560 3A CNC Router Single 1 Axis Controller Stepper Motor Driver Board

Using the TB6560AHQ chip with low voltage shutdown, overheating stop and overcurrent protection circuit to ensure optimal performance.
With large heat sink to ensure good heat dissipation.
6N137 high-speed optical coupling, guarantee high speed without losing step.
Semi-flow mode adjustable, semi-flow current adjustable, not the general design on the market, with a variety of semi-flow model and semi-flow current setting function.
Attenuation model adjusted for all the motors can be locked when no noise.

Rank No. #4

CNCTOPBAOS 4 Axis CNC Kit Nema23 Stepper Motor 270oz-in 76mm 3A 1.8Nm,TB6600 Driver 24V DC Controller Kit,MACH3 Motion Control Card USB Board for CNC Router Engraving Machine

♞【23HS8430 Nema23 Stepper Motor】Nema23 57 stepper motor;Step Angle: 1.8°; Current: 3.0A; Holding torque: 180N.cm/18kg.cm/270oz-in; Shaft : 8mm single shaft; Wiring:A+ : Red; A- : Green; B+ : Yellow; B- : Blue; Motor Size: 57x57x76mm
♞【Driver】TB6600 driver Voltage: DC 10V-45V; Current: rated maximum output reaches: ±4.5A ; Subdivision: full step, half step, 1/4 step, 1/8 step, 1/16 step, maximum 16 subdivisions.
♞【4 Axis USB Mach3 Control Board】USB interface is applicable to any netbook, notebook, desktop, tablet and other PC compatible computers with USB interface. This control board does not require any drivers to be installed. As long as Mach3 can run, the control card can be used; Support computer system:Windows 2000/ XP / Windows 7/8/10; Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;
♞【350W 24V DC Switching Power Supply】AC input voltage range: 110V-120V AC or 220V-240V AC; selected by switch to choose input voltage.
♞【Functions of the Control Board】Can support the limit switch, emergency stop switch, auto tool zero, home switch etc.Support for connecting electronic handwheel.Have 0-10V signal output ,you can use mach3 software to control the spindle motor speed,can drive four relays for controlling the spindle starts, forward rotating and reverse rotating,pumps or other device.

Rank No. #5

TB6600 4A Stepper Motor Driver CNC Controller, Driver Controller Board for CNC 4-Axis 2 Phase Nema Stepper Motor for CNC, Motor Driver Board

This driver board adopts of a new type of polar double-constant current chopper technology
The motor driver board has the automatic half-current function
The maximum input pulse frequency is 150KHZ
Support the following subdivision selections: 1, 1/2, 1/4, 1/8 and 1/16
It has the stepless adjustable function of current 0.5~4A

Rank No. #6

CNCTOPBAOS 4 Axis Nema23 Stepper Motor CNC Kit 270oz-in 76mm 3A Dual Shaft,TB6560 MD430 Driver,Mach3 Control Card Breakout Board 24V DC CNC Controller Kit for CNC Router Engraving Machine

♞【Nema23 Stepper Motor】 23HS8430B Nema23 Stepper Motor / Holding Torque: 270 oz-in ; 180N.cm / Motor Size:57x57x76mm / Phase: 2 phase / Motor Lead : 4-Lead / 1.8° Step Angle / Type:Hybrid
♞【Stepper Motor Driver】TB6560/MD430 Stepper Motor Driver / Current: 3A / Support voltages : 12-34V DC / Step frequency up to 100khz / 2 phases bipolar driver / Full step, half step, eight step and sixteenth step
♞【5 Axis V5 Breakout Board】 Comes with DB25 parallel cable and USB cable ; Support Mach3,KCAM4,EMC2 and other software ; 5-way input interface, you can connect limit switch and stop switch,reset,knife signal;Data transfer speed can up to 10MBit/s
♞【Power supply】350W,24V/14.6A switching power supply; Output Voltage:24V ; Input: 110-120V AC or 220-240V AC
♞【Application】This cnc kit are widely used in engraving machine, printer, medical equipment, embroidery machine, stage lighting, textile automation, printing, packaging and other industries automation equipment.

Rank No. #7

CNCTOPBAOS TB6560 3 Axis Nema17 Nema23 Stepper Motor Driver Board Controller Driver Breakout Board V Type 3.5A 12-36V DC with Parallel Cable for CNC Router Engraving Milling Machine

With 3 wire 0.8-3.5A (peak) rated output of two-phase adjustable-current bipolar stepper motor drive;
Standard parallel port interface, support for MACH2, MACH3 and KCAM4 series software;
With optical isolation and DCDC power supply isolation, the full protection of your computer parallel port and equipment
with limit switch,can connection 4 aixs limit switch;12-36V single switching power supply,microchips to use as a 5V power supply, stable and heat small

Rank No. #8

STEPPERONLINE 1 Axis Stepper Motor CNC Kit 3.0 Nm(425oz.in) Nema 23 Stepper Motor & Digital Stepper Driver 1.8-5.6A 20-50VDC

This CNC kit included
1 x Nema 23 Bipolar 3Nm (425oz.in) 4.2A 57x57x114mm 4 Wires CNC Stepper Motor
1x Digital Stepper Driver 1.8~5.6A 20-50VDC for Nema 23, 24, 34 Stepper Motor

Rank No. #9

HiLetgo MACH3 Engraving Machine CNC 5 Axis Stepper Motor Driver Interface Board with Optocoupler Isolation Blue Board + USB Cable

MACH3 Engraving Machine CNC 5 Axis Stepper Motor Driver
Fully support MACH3 and other computer software controlled by parallel
Open all 17 ports. Can be connected with optocoupler drive and can control the 5-axis stepper motor.
Fully support MACH3 and other computer software controlled by parallel.

Rank No. #10

RATTMMOTOR 3 Axis CNC Controller Kit with Nema23 Stepper Motor 270oz-in 76mm 3A 1.8Nm, TB6600 Stepper Motor Driver 24VDC, USB Mach3 Motion Control Card Breakout Board, 350W Switching Power Supply

【Motor and TB6600 Driver wiring】Stepper motor's RED wire connects to driver's A+ port. Stepper motor's GREEN wire connects to driver's A- port. Stepper motor's YELLOW wire connects to driver's B+ port. Stepper motor's BLUE wire connects to driver's B- port.
【Control Card and TB6600 Driver wiring (X-axis as an example) 】Driver's "CLK-" connects to control card's XP pin , Driver's "CW-" connects to control card's XD pin , Driver's "5V" connects to control card's 5V pin.(The USB Mach3 control card can't support connection EN- and EN+).
【Low Noise/High Torque Hybrid Stepper Motor】23HS8430 2-phase stepper motor with a shaft diameter of 8mm, a current of 3A and an angle of 1.8°, is made of durable metal on the outside, and the perfect combination of rubber and rotor fills up the inner space and stabilizes the overall structure of the motor. The coils are made of pure copper enameled wire and the torque is up to 270oz-in (180N.cm/18kg-cm). The motor runs quietly and doesn't cause the generator to become too hot over a long time.
【Upgraded 4.5A Stepper Motor Driver】Using the latest TB6600 new installation chip, there are low-voltage shutdown, thermal over-stop and over-current circuit protection, and compared with the TB6560 increased short-circuit protection. TB6600 driver operating voltage of DC 10-45VDC, support for sub-division of the whole step, half-step, 1/4, 1/8, 1/16 step, up to 42/57/86 two-phase / four-phase / four-wire / six-wire stepper motors within 4.2A. / six-wire stepper motor.
【USB Interface, Drive-free Design 4-Axis Linkage Control Card】Output pulse frequency of 400KHz, using the minimum error interpolation algorithm, high processing accuracy. Supports up to 4 axes of linkage control, of which the 4th axis can be set as the slave axis. The control card can be connected to PC-compatible computers such as laptops, desktops, tablets and other computers with a USB interface. As long as Mach3 is running, the control card can be used without installing any drivers.

Rank No. #11

SainSmart CNC 4-Axis Kit with TB6600 Driver ST4045 & Nema23 270oz-in Stepper Motor, USB Controller Card, Nema23 Stepper Motor and 36V Power Supply

Comes with CNC USB port interface breakout board
4.5A ST-4045 stepper motor driver, ensure the stable operation of equipment
350W 36V switching power supply; the range of AC input voltage is changed by the switch
57HS76 stepper motor, powerful and stable to work.
Easy to assemle, simply to DIY.

Rank No. #12

STEPPERONLINE Closed Loop Stepper Motor 1 Axis CNC KIT 3.0 Nm/424.92oz.in Nema 24 Stepper Motor & 0-8.0A 24-48VDC Stepper Driver

High torque, long life, low temperature rise, low noise, well-package
Motor specifications: 2 phase, Torque: 3.0 Nm/424.92oz, Current: 5A
Driver Specification: Power:24-48VDC, Output Current: 0-8.0A, Temperature: -20℃~+65℃
Suit for 3D printer/CNC machine/Carving Machine/Dispenser/Automation Application
100% service satisfactory. We provided this stepper motor kit with 30 days free replacement or refund, 1 year warranty and whole life customer service from the date of purchasing.

Rank No. #13

CNCTOPBAOS TB6560 4 Axis Nema 23 Stepper Motor Driver Board CNC Controller Breakout Board 3A 12-36V DC 4V Type with Parallel Cable for CNC Router Milling Engraving Machine

4-wire 0-3.5A normally 3A , the 3.5A is the peak currentcan be regulated rate current output, bipolar stepper motor driver.
Standard parallel port , supports Mach2 Mach3,EMC2 and KCAM 4 etc.
Optical isolated (IO) and DCDC power isolated to protect the PC parallel port and other equipments.
4 working modes: mixed mode , fast mode, slow mode, standard mode 4-microstep: 1 1/2 1/4 1/16 .

Rank No. #14

Ruida Controller RDC6442DMYH Laser DSP Controller System for CO2 Laser Machines USA Stock

Rank No. #15

EASON Stepper Motor Driver TB6600 4A DC9-42V 32 Subdivision for Nema 17, 23 Series Stepper Motor CNC Controller Single Axis Hybrid MicroStepping

This driver is an upgraded version of TB6600 and with plastic cover.
The subdivision is increased to 32 subdivision, which is suitable for high subdivision.
Suitable for drive Two-phase stepping motor dynamic voltage 9V to 42V, the maximum drive current is less than 4A.
Suitable for step motor:NEMA(17,23) 42, 57 type 2 phase 4 phase (4 / 6 / 8 wires)
Suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices.

Rank No. #16

OUYZGIA TB6600 Stepper Motor Driver 4A Stepper Driver for Nema 17, 23 and 34 Stepper Motor, 9-42V, 32 Segments, Upgraded Version-1PCS

Signal Input: Single-ended, pulse/direction. Optocoupler isolated signal input, strong anti-interference capability
Subdivision Options: 1/2/4/8/16/32 subdivision to drive 4/6/8 wire 2 phase/4 phase hybrid stepper motors, (current less than or equal to 4.0A). Compatible with stepper motors with step angles of 1.8° and 0.9°
Current and Voltage: Output Current: 0.5A-4.0A, the maximum output current is 4.0A. Input voltage: 9-42VDC, external signal 3.3-24V can be connected directly without series resistor
Safe and Reliable: Overheat, overcurrent, undervoltage lockout, input voltage protection against reversal, etc. Safer. The current is automatically halved at standstill
High Compatibility: Suitable for all brands of 4/6/8 wire 2/4 phase hybrid stepper motors. Suitable for various small and medium-sized automation equipment and instruments, such as: engraving machines, marking machines, cutting machines, laser illumination, plotters, CNC machine tools etc

SaleRank No. #17

Creality Official 42-40 Stepper Motor, 3D Printer X/Y-Axis Extruder Stepping Motor 2 Phase 1A 1.8 Degree 0.4 N.M, Compatible with CR-10 Series and Ender-3 Series X/Y/E-axis （D-Shape）

👉【Quality security】Creality 100% official, Original 42-40 stepper motor applies for E-Axis of CR 10 Max/ CR 10 Smart/ CR 10S Pro V2/ CR 30/ CR 6 Max/ CR 6 SE/ CR X/ CR X Pro/ Ender 3 Max/ Ender 3 Neo; X-Axis of CR 10 Max/ CR 10S Pro V2/ CR X/ CR X Pro; Y-Axis of CR 10 Smart/ CR 10 V2/ CR 10 V3/ CR 6 SE/ Ender 3 Max/ Ender 3 Max Neo. The connecting cable is not included!
❤【High-quality Stepper Motor】3D Printer motor with low noise and efficient heat dissipation has large torque and high precision without losing steps. 1.8-degree step angle, 0.4N.M holding torque, with 1A rated current per phase. This means that you can save on the cost of replacing or repairing the engine.
🆗【Low Noise Stepper Motor】The high-quality motor with low power, uniform speed, stable performance, high accuracy, low noise, and no step to lose during the operation, which ensures the extrusion mechanism stable operation. This greatly reduces the vibration and noise when the motor is working, keeps you focused, and provides a quiet printing experience for colleagues and family.
⭕【Precise Rotation】Perfectly fits with the high-strength synchronous wheel and synchronous gear, it realizes accurate constant ratio, uniform revolution, and high transmission efficiency, while avoiding system errors and obtaining accurate results. Shaft diameter: 5mm(D-shape)
👍【After Sales Support】More than 20 engineers provide 24/7 customer service with 12-months limited and lifetime technical assistance. Please kindly contact us(seller) via “ask a question” find us directly, cause our customer service will respond to you within 24 hours no matter what question.

Rank No. #18

Hilitand Stepper Motor Board, 5 Axis USB Interface Board for CNC Stepper Motor

Fully support for MACH3 and other computer software that supports parallel port control.USB power supply and peripheral power supply are separated to ensure computer security.
12-24V wide peripheral voltage input, with anti-reverse connection function.All input are isolated by optical coupling, and can be connected to emergency stop, tool setting, limit, etc.
One-way relay output port can control the spindle switch. The output port is P17 port. One-way optocoupler isolated 0-10V analog voltage output can control the inverter with the corresponding analog interface to control the spindle speed. The output port is the P1 port.
Open all 17 ports, can be connected with optocoupler drive, can control 5-axis stepper motor.
P1 acts as a PWM output and can control the spindle governor with optocoupler input. Can be connected to the common cathode/anode drive with input level of 5V.

Rank No. #19

Creality Original Ender 3 S1/Pro X-Axis Stepper Motor, 42-34 3D Printer Stepping Motor with 2GT 20-Tooth Synchronous Wheel, for Ender-3 Series/Ender-5 Series/CR-6 Max/CR-6 SE/CR-10 Smart Pro X-Axis

【Quality Assurance】100% Creality official stepper motor, our 42-34 stepper motor compatibility with 3D Printer X-axis of Ender-3 Series/Ender-5 Series/CR-6 Max/CR-6 SE/CR-10 Smart Pro. The metal rod height is 15 mm/0.59 in.
【Product parameters】1.8 degree step angle, 0.4 N.M holding torque, with 0.8A rated current per phase. (Only step motor, the connecting cable is not included.)
【High-Quality Stepper Motor】With low power, stable speed and performance, low noise, and no step loss during operation, which ensures the stable operation of the extrusion mechanism.
【Great Value Spare Parts】Equipped with 2GT 20-Tooth width 6mm Synchronous Pulley, it fits perfectly with the timing belt to provide perfect and precise linear functions for your 3D printer.
【After Sales Support】We provide professional after-sales support. Please kindly contact us(seller) via “ask a question” find us directly cause our customer service will respond to you within 24 hours no matter what the question.

Rank No. #20

Befenybay 2PCS Aluminum Alloy Z axis Stepper Motor Mount Rack for 3D Printer Ender-3 CR-10 Series

【Material】 Aluminum Alloy
【Widely Used】widely used for CR-10, Ender 3 etc
【Dimensions】Length: 38mm. Width: 9mm. Height: 8mm
【Install】Already assembled,you don't need to assemble it by yourself
【Package Include】2 pcs Z axis Stepper Motor Mount Rack, 4pcs M4 T Nuts, 4pcs M4x10mm screws, 4 pcs M3x12mm screws

Last update on 2023-07-31 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best 3 Axis Stepper Motor Driver?

Do you get stressed out thinking about shopping for a great 3 Axis Stepper Motor Driver? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 3 Axis Stepper Motor Driver, which is why we have assembled a comprehensive list of the greatest 3 Axis Stepper Motor Driver available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 3 Axis Stepper Motor Driver that you consider buying. Your questions might include the following:

Is it worth buying an 3 Axis Stepper Motor Driver?
What benefits are there with buying an 3 Axis Stepper Motor Driver?
What factors deserve consideration when shopping for an effective 3 Axis Stepper Motor Driver?
Why is it crucial to invest in any 3 Axis Stepper Motor Driver, much less the best one?
Which 3 Axis Stepper Motor Driver are good in the current market?
Where can you find information like this about 3 Axis Stepper Motor Driver?

We’re convinced that you likely have far more questions than just these regarding 3 Axis Stepper Motor Driver, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for 3 Axis Stepper Motor Driver, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 3 Axis Stepper Motor Driver. Make sure that you are only using trustworthy and credible websites and sources.

We provide an 3 Axis Stepper Motor Driver buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 3 Axis Stepper Motor Driver currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of 3 Axis Stepper Motor Driver has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an 3 Axis Stepper Motor Driver?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your 3 Axis Stepper Motor Driver.
Customer Ratings: Number ratings grade 3 Axis Stepper Motor Driver objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 3 Axis Stepper Motor Driver.
Product Quality: You don’t always get what you pay for with an 3 Axis Stepper Motor Driver, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an 3 Axis Stepper Motor Driver is should be an indication of how long it will work out for you.

We always remember that maintaining 3 Axis Stepper Motor Driver information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding 3 Axis Stepper Motor Driver is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: What kind of power does a stepper motor need?

A: Power supply: voltage: 12V current about 4A , according to the load to increase or decrease the power supply. Support stepper motor: NEMA17 NEMA23 stepper motor, phase current less than 1.5A . Laser interface: 12V or 5V, power less than 18W laser module.

Q: How big is the NEMA 23 stepper motor?

A: ♞【Nema 23 Stepper Motor】 Nema 23 Stepper Motor / Holding Torque: 270 oz-in,180N.cm / Motor Size:57x57x76mm / Phase:2 / Motor wire:4pcs / 1.8 Step New (2) from $150.00 & FREE Shipping . To see our price, add these items to your cart. Some of these items ship sooner than the others.

Q: Which is the maximum DC spindle motor interface?

A: Spindle motor interface: the maximum support 400W DC spindle motor. With fan interface and TTL signal output interface (for controlling the laser module with TTL module). Limit interface: 3-axis limit interface. Probe interface: for Z axis tool zero.