Contents

20 Best Honda Crv Trailer Hitch Installation Cost of 2023 – Romance University

After hours researching and comparing all models on the market, Romance University finds out the Best Honda Crv Trailer Hitch Installation Cost of 2023. Check our ranking below.

2,920 Reviews Scanned

Rank No. #1

Curt 13119 22272 Class 3 Trailer Hitch with 2 Inch Receiver and 2 Inch Rubber Hitch Tube Cover Bundle for 12-16 Honda CR-V

Rank No. #2

CURT 13397 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Honda CR-V

DEPENDABLE STRENGTH. This trailer hitch is rated for 3,500 lbs. gross trailer weight and 525 lbs. tongue weight (limited to lowest-rated towing component)
VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more
FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling
RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays
EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Honda CR-V

Rank No. #3

CURT 13119 Class 3 Trailer Hitch, 2-Inch Receiver, Compatible with Select Honda CR-V , Black

DEPENDABLE STRENGTH. This trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component)
VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more
FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling
RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays
EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Honda CR-V

Rank No. #4

Draw-Tite 76128 Class 3 Trailer Hitch, 2 Inch Receiver, Black, Compatible with 2017-2021 Honda CR-V (Pack of 1)

Designed to complement today's trucks, vans and sport utility vehicles, attach directly to the frame with no drilling or welding necessary
2 inch square receiver tube opening and solid all-welded construction for maximum strength and durability
The A-Coat base with black powder coat finish is resistant to adverse weather conditions and corrosion, ensures an attractive appearance for years to come
Computer-Aided design and fatigue stress tested to ensure perfect fit and top towing performance. Fits These Vehicles : Honda CR-V (2017, 2018, 2019)
Maximum rated capacity up to 675 pounds (TW) and 4,500 pounds (GTW) Weight Carrying (WC), always consult the vehicles owners manual for maximum towing capacity

Rank No. #5

CURT 13314 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Honda CR-V

DEPENDABLE STRENGTH. This trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component)
VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more
FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling
RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays
EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Honda CR-V

Rank No. #6

CURT 13535 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Honda CR-V, GLOSS BLACK POWDER COAT

DEPENDABLE STRENGTH. This trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component)
VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more
FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling
RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays
EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Honda CR-V. Material-Carbon Steel

SaleRank No. #7

CURT 13555 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Honda CR-V

DEPENDABLE STRENGTH. This trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component)
VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more
FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling
RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays
EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Honda CR-V. Material-Carbon Steel

Rank No. #8

Draw-Tite 75742 Class 3 Trailer Hitch, 2 Inch Receiver, Compatible with 2012-2016 Honda CR-V

CUSTOM DESIGNS: Draw-Tite Class 3 trailer hitch tow packages are custom built according to manufacturer specifications to ensure a perfect fit.
MAXIMUM STRENGTH: Made of solid, all-welded steel for maximum strength and safety, each Draw-Tite hitch receiver is put through rigorous fatigue and stress testing to withstand road abuse (within specified capacities). Protected by a two-part black powder coat finish to resist rust and corrosion.
TESTED: Draw-Tite tow hitch receivers are tested to meet and exceed V-5 and SAE J684 standards.
CAPACITY: Tow hitch package rated for up to 4,500 lbs. GTW and up to 675 lbs. TW. NOT suitable for use with Weight Distribution systems.
VEHICLE FIT: 2012-2016 Honda CR-V.

Rank No. #9

CURT 11555 Class 1 Trailer Hitch, 1-1/4-Inch Receiver, Fits Select Honda CR-V , Black

DEPENDABLE STRENGTH. With a strong, welded steel build, this class 1 hitch is rated for 2,000 lbs. gross trailer weight and 200 lbs. tongue weight (limited to lowest-rated towing component)
HIGHLY VERSATILE. Add useful, versatile towing options to your vehicle with this class 1 trailer hitch. It provides a standard 1-1/4-inch x 1-1/4-inch receiver hitch, allowing you to tow a small trailer or mount a cargo carrier or bike rack
DUAL-COAT FINISH. For industry-leading rust, chip and UV resistance inside and out, this aftermarket tow hitch kit is submersed in a liquid A-coat and co-cured with a durable black powder coat finish
EASY INSTALLATION. This class 1 hitch is designed to factory fit select model years of the Honda CR-V
TESTED FOR SAFETY. Each CURT class 1 trailer hitch design is thoroughly tested, using real vehicles in real-world conditions. Our hitches are tested to SAE J684 specifications for safety on the road ahead

Rank No. #10

Thule EasyFold XT 2 Hitch Bike Rack - E-Bike Compatible - Fits 2" and 1, 1/4" receivers - Tool-Free Installation - Fully Foldable - Easy Trunk Access - Fully Locking - 130lb Load Capacity

Premium, high-load capacity bike rack ideal for e-bikes and heavy mountain bikes.Distance between bikes : 9 inch. Max wheelbase : 1300 mm..Max wheelbase : 1300 mm.
Integrated folding bike loading ramp
Fits 1.25" and 2" receivers
Fast and effortless tool-free installation
Quickly attach and secure bikes with torque limiting knobs and ratcheting wheel straps

Rank No. #11

Draw-Tite 36597 Class 2 Trailer Hitch, 1.25 Inch Receiver, Black, Compatible with 2017-2021 Honda CR-V

1-1⁄4 in. Square Receiver Tube Opening
Rated Up To 3,500 lbs. Gross Trailer Weight (GTW) And Up To 300 lbs. Tongue Weight (TW)
All Hitches Are Designed For Customers With Passenger Cars And Sport Utility Vehicles
Removable Drawbar, Pin, And Clip Sold Separately
Clean Appearance That Attaches To The Vehicle's Frame And/Or Bumper

SaleRank No. #12

Rightline Gear Range Jr Weatherproof Rooftop Cargo Carrier for Top of Vehicle, Attaches With or Without Roof Rack, 10 Cubic Feet, Black

Car Top Carrier: Our convenient roof cargo carrier allows you to keep your gear up top, so you can transport belongings and passengers without compromising on safety, comfort, or convenience
Intuitive Features: Specially designed to keep your gear dry, our waterproof car roof cargo carrier features welded seams, an urethane-coated zipper, and a hook-and-loop-close zipper flap
Quality Construction: Constructed of UV-protected PVC semi-coated mesh, our durable vehicle cargo carriers are designed to keep your belongings dry and won't fly off your roof
Simple Setup: Simply attach the straps of the roof bag to your vehicle’s roof rack or use the included car clips to attach the straps to your vehicle’s door frame weather molding
Seamless Storage: Our rooftop cargo bag folds down for storage in the included stuff sack; Car roof bag, 4 attachment straps, 4 car clips, and stuff sack with sewn-in setup guide included

Rank No. #13

Draw-Tite 76342 Class 3 Trailer Hitch, 2 Inch Receiver, Black, Compatible with 2017-2021 Honda CR-V

2 in. Square Receiver Tube Opening
Rated Up To 3,500 lbs. Gross Trailer Weight (GTW) And Up To 525 lbs. Tongue Weight (TW)
All Hitches Are Designed For Customers With Trucks, Vans, And Sport Utility Vehicles
Clean Appearance That Attaches To The Vehicle's Frame And/Or Bumper
Removable Ball Mount, Pin, And Clip Sold Separately

Rank No. #14

CURT 56370 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Honda CR-V , Black

EASY TO INSTALL. No cutting! No splicing! This trailer wiring harness kit plugs into existing factory wiring on your vehicle and equips it with a standard, rear 4-pin trailer wiring connector for plugging in and towing a trailer
STANDARD CONNECTOR. This plug-in 4-flat trailer wiring can be used to connect trailer tail lights, brake signal lights and turn signals. 4-way trailer light wiring is popular on a wide variety of trailers, adding versatile towing options for your vehicle
VEHICLE-SPECIFIC. This aftermarket, vehicle-trailer wiring harness is designed for select years of the Honda CR V (factory tow package required)
RELIABLE POWER. This 4-way trailer wiring harness is built with surface mount technology. This type of circuitry generates less heat, optimal light intensity and durable performance
DUST COVER. To promote long-lasting use and weather resistance, this 4-pole trailer lighting wire harness comes with a rubber dust cover. It easily fits onto the 4-way flat connector when not in use, protecting it against the outdoor elements

Rank No. #15

CURT 12169 Class 2 Trailer Hitch, 1-1/4-Inch Receiver, Compatible with Select Honda CR-V

DEPENDABLE STRENGTH. With a strong, welded steel build, this class 2 hitch package is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component)
HIGHLY VERSATILE. Add useful, versatile towing options to your vehicle with this class 2 trailer hitch. It provides a standard 1-1/4-inch x 1-1/4-inch receiver hitch, allowing you to tow a small trailer or mount a cargo carrier or bike rack
DUAL-COAT FINISH. For industry-leading rust, chip and UV resistance inside and out, this automotive tow hitch is submersed in a liquid A-coat and co-cured with a durable black powder coat finish
EASY INSTALLATION. This class 2 hitch fits select model years of the Honda CR-V
TESTED FOR SAFETY. Each CURT class 2 trailer hitch design is thoroughly tested at our Detroit facility, using real vehicles in real-world conditions. Our hitches are tested to SAE J684 specs to give you confidence and safety on the road ahead

Rank No. #16

CURT 13068 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Honda Odyssey, GLOSS BLACK POWDER COAT

DEPENDABLE STRENGTH. This trailer hitch is rated for 3,500 lbs. gross trailer weight, 350 lbs. tongue weight, 5,000 lbs. weight distribution capacity and 500 lbs. weight distribution tongue weight (limited to lowest-rated towing component)
VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more
FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling
RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays
EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Honda Odyssey

Rank No. #17

Reese Towpower 44675 Class III Custom-Fit Hitch with 2" Square Receiver opening , Black

2 in. Square Receiver Tube Opening. No drill for easy installation
Rated Up To 4,500 lbs. Gross Trailer Weight (GTW) And Up To 675 lbs. Tongue Weight (TW)
All Hitches Are Designed For Customers With Trucks, Vans, And Sport Utility Vehicles
Clean Appearance That Attaches To The Vehicle's Frame And/Or Bumper
Removable Ball Mount, Pin, And Clip Sold Separately

Rank No. #18

Draw-Tite 24792 Class 1 Trailer Hitch, 1.25 Inch Receiver, Black, Compatible with 2007-2011 Honda CR-V

1-1⁄4 in. Square Receiver Tube Opening
Rated Up To 2,000 lbs. Gross Trailer Weight (GTW) And Up To 200 lbs. Tongue Weight (TW)
All Hitches Are Designed For Customers With Passenger Cars And Sport Utility Vehicles
Removable Drawbar, Pin, And Clip Sold Separately
Clean Appearance That Attaches To The Vehicle's Frame And/Or Bumper

Rank No. #19

Reese Towpower 44643 Class III Custom-Fit Hitch with 2" Square Receiver opening, includes Hitch Plug Cover , Black

Up to 350 pounds tongue weight and gross towing weight of 3500 pounds - you should always consult the vehicles owners manual for maximum towing capacity
2 inch square receiver tube opening
All-welded construction for maximum strength and safety
Passenger car SUV van and light truck applications
Hitch box cover included

Rank No. #20

CURT 11681 Class 1 Trailer Hitch, 1-1/4-Inch Receiver, Fits Select Honda Accord , Black

DEPENDABLE STRENGTH. With a strong, welded steel build, this class 1 hitch is rated for 2,000 lbs. gross trailer weight and 200 lbs. tongue weight (limited to lowest-rated towing component)
HIGHLY VERSATILE. Add useful, versatile towing options to your vehicle with this class 1 trailer hitch. It provides a standard 1-1/4-inch x 1-1/4-inch receiver hitch, allowing you to tow a small trailer or mount a cargo carrier or bike rack
DUAL-COAT FINISH. For industry-leading rust, chip and UV resistance inside and out, this aftermarket tow hitch kit is submersed in a liquid A-coat and co-cured with a durable black powder coat finish
EASY INSTALLATION. This class 1 hitch is designed to factory fit select model years of the Honda Accord
TESTED FOR SAFETY. Each CURT class 1 trailer hitch design is thoroughly tested, using real vehicles in real-world conditions. Our hitches are tested to SAE J684 specifications for safety on the road ahead

Last update on 2023-08-09 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Honda Crv Trailer Hitch Installation Cost?

Do you get stressed out thinking about shopping for a great Honda Crv Trailer Hitch Installation Cost? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Honda Crv Trailer Hitch Installation Cost, which is why we have assembled a comprehensive list of the greatest Honda Crv Trailer Hitch Installation Cost available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Honda Crv Trailer Hitch Installation Cost that you consider buying. Your questions might include the following:

Is it worth buying an Honda Crv Trailer Hitch Installation Cost?
What benefits are there with buying an Honda Crv Trailer Hitch Installation Cost?
What factors deserve consideration when shopping for an effective Honda Crv Trailer Hitch Installation Cost?
Why is it crucial to invest in any Honda Crv Trailer Hitch Installation Cost, much less the best one?
Which Honda Crv Trailer Hitch Installation Cost are good in the current market?
Where can you find information like this about Honda Crv Trailer Hitch Installation Cost?

We’re convinced that you likely have far more questions than just these regarding Honda Crv Trailer Hitch Installation Cost, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Honda Crv Trailer Hitch Installation Cost, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Honda Crv Trailer Hitch Installation Cost. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an Honda Crv Trailer Hitch Installation Cost buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Honda Crv Trailer Hitch Installation Cost currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Honda Crv Trailer Hitch Installation Cost has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Honda Crv Trailer Hitch Installation Cost?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Honda Crv Trailer Hitch Installation Cost.
Customer Ratings: Number ratings grade Honda Crv Trailer Hitch Installation Cost objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Honda Crv Trailer Hitch Installation Cost.
Product Quality: You don’t always get what you pay for with an Honda Crv Trailer Hitch Installation Cost, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Honda Crv Trailer Hitch Installation Cost is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining Honda Crv Trailer Hitch Installation Cost information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Honda Crv Trailer Hitch Installation Cost is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: How much does trailer hitch installation cost?

A: Class V trailer hitches are designed for heavy duty vans and trucks, which can tow larger trailers; it can handle up to 18,000 pounds GTW. Class V can cost from $400 to $650 and more, and trailer hitch cost can top out at $15,000. The trailer hitch installation price can add up to $500 for this particular class of trailer hitch.

Q: Can a Honda CRV pull travel trailer?

A: Yes , Honda CRV can tow a travel trailer. The Towing Capacity of Honda CRV is 1,500 lbs, so any travel trailer that meets this requirement can be towed or pulled by Honda CRV easily. Some of the best travel trailers that can be towed by Honda CRV are MyPod, Basedrop, and SylvanSport Go.

Q: What does Honda CR-V stand for?

A: The acronym “CRV” (as in Honda CR-V) represents a mix between a car or minivan and a sport utility vehicle, or SUV. There are at least two official definitions of it. It’s stands for “Compact Recreation Vehicle. It’s “Comfortable Runabout Vehicle.”.