20 Best Jetta Trunk Fix Kit of 2023 – Romance University

After hours researching and comparing all models on the market, Romance University finds out the Best Jetta Trunk Fix Kit of 2023. Check our ranking below.

2,636 Reviews Scanned

Rank No. #1

URO Parts 1J5827567APRM Trunk Latch Actuator Bracket Repair Kit

OE lock actuator lever is fragile plastic and often breaks
URO actuator lever is aircraft-quality aluminum for long life
Replacement with URO lever restores proper trunk latch operation
Fit type: Vehicle Specific

Rank No. #2

2Pcs 11.77 In Rear Back Lift Supports Compatible With 2005-2010 JETTA liftgate tailgate Hatch trunk Struts Sedan Only not for Wagon; fr. Chassis/VIN 1K-5-600-001

Designed For Original Equipment Fit And Performance,replaced with these in just a couple of minutes,your vehicle fully opens by itself like it used to do when new
Gently reduces the opening and closing speed as the lift support reaches the end of the cycle, reducing wear on joints and hinges.
Restores the original opening and closing speeds of your hood, hatch or trunk. No special tools required.
Exact replacement, engineered for your application. Rust-resistant piston rod extends product life.
Easy lifting, reduced closing effort. Consistent lifting force through 30,000 cycles.

Rank No. #3

Bumper Trunk Quick Release Front Rear Bumper Fastener Kit …

Need to attach and detach your bumper quickly? Quick release fasteners are great for front bumpers, rear bumpers, and hatch lids that need to be frequently removed. They are perfect for people who go to the pits often and are not difficult to install.
Package Includes: 4 x Quick release tabs; 4 x Stainless steel bolts; 4 x Nuts; 4 x Washers; 2x O-Rings.
First, mark where you will install the quick bumper release kit.Then,Drill the holes.After,Install the aluminum knot.Put the washer on the other side of the bumper/fender. You will need a hex tool as well as a wrench to fasten everything together.Afterwards, mount it back with the rubber band.You can either put the rubber band in the normal way or even a cross with the same result.
This is a great mod for people who are always at the pits. As you can see, the installation does not take too long to install, and the drilling is completely worth it for the fresh new look. Enjoy your quick bumper release fasteners!
100% SATISFACTION -When you receive the goods, if there are any problem, please contact us and do not directly open the dispute. We promise we will give you a satisfied solution after we confirmed it. We also will give you a positive evaluation.

SaleRank No. #4

Haneex 1pc Cargo Trunk Bag Hook Kit for Audi A4 S4 VW Passat CC B6 Jetta 2002-2012

1pc Cargo Trunk Bag Hook Kit
For 2008-2012 Passat CC; 2005-2010 Passat B6; 2005-2010 VW Jetta MK5; 2002-2012 Audi A4 S4
Color: Black
Brand new

Rank No. #5

2Pcs Rear Back liftgate tailgate Hatch trunk Struts Lift Supports Shock Gas Spring Prop Rod Compatible With 2005-2010 JETTA (Note:Sedan Only not for Wagon; fr. Chassis/VIN 1K-5-600-001)

2Pcs Rear Back liftgate tailgate Hatch trunk Struts Lift Supports Shock Gas Spring Prop Rod Compatible With 2005 - 2010 JETTA (Note:Sedan Only not for Wagon; fr. Chassis/VIN 1K-5-600-001)
Extended Length:11.77[Inch] Compressed Length:9.17[Inch] Pounds Of Force:160[LBS]
Replacement Lift Supports For:Trunk Caps, Camper,Marine,Toolbox & Universal Applications
NOTICE - We provide THREE YEAR WARRANTY for all our lift supports. Please contact us if you have any question.Designed For Original Equipment Fit And Performance,replaced with these in just a couple of minutes,your vehicle fully opens by itself like it used to do when new
Gently reduces the opening and closing speed as the lift support reaches the end of the cycle, reducing wear on joints and hinges. Manufactured to automotive O.E. performance and quality specifications. Restores the original opening and closing speeds of your hood, hatch or trunk. No special tools required. Exact replacement, engineered for your application. Rust-resistant piston rod extends product life. Easy lifting, reduced closing effort. Consistent lifting force through 30,000 cycles.

Rank No. #6

OGHParts Compatible Replacement Trunk Latch Bracket Rear Repair Kit Jetta Passat Golf 1999-2005

Passat Golf Jetta Trunk Latch Bracket Repair Kit
New Contents Trunk Latch Bracket Repair Kit Model Years Passat 1998 - 2005 Passat Jetta Golf
High quality aftermarket parts

Rank No. #7

Rear Trunk Lift Supports Struts Shocks for Volkswagen Jetta 2005 2006 2007 2008 2009 2010 6430 SG401052 Qty 2

Fitment: Rear trunk lift supports struts shocks compatible with Volkswagen Jetta 2005 2006 2007 2008 2009 2010
Specifications: Extended length: 11.72" , compressed length: 9.22", support weight: 710N per strut
OEM Part Number: 6430 SG401052
Advantage: Props rods gas springs are made of high-quality materials. Easy to install, simple installation without special tools.
Service: 12-month warranty. Any questions, please contact us and we will solve for you asap. You can buy with confidence.

Rank No. #8

Universal Billet Bumper Trunk Quick Release Fastener Kit, Quick Release Trunk Front Rear Bumper Fasteners Fenders Holders Car Bumper Clips Kit (Black)

Convenience: 1. First take out the bumper quick release fasteners and O-ring rubber, Then lift the bumper to your desired position. 2. Mark the desired hole locations on the fender. 3. Considering the elasticity of the rubber, The spacing can be slightly shortened, So that the effect of tight symmetry can be achieved. Can be disassembled quickly, easily and frequently.
Durable: These bumper washers are made with T6 6061 high quality Aluminum bumper fasteners can help you solve the problem of easily re-fixing the car bumper after it falls off long durability.
Wide Range of Applications: This Bumper Fasteners Kit fits for all vehicles,especially for Late Model Vehicles, Import & Domestic To Compatible with Honda, Toyota ,Ford, Chevy, Nissan,Volkswagen & Many More. As a common structural material in auto parts, its excellent hardness and strength make you more at ease in use.
Perfect Choice: Aluminum alloy quick release bumper fasteners ensure its stability in use, Customized nitrile rubber (NBR) is used to bid farewell to ordinary rubber that breaks when it is used and melts when exposed to the sun.
Package Includes: 4 x Aluminum Fasteners;4 x Nuts;4 x washers;4 x Stainless Bolts;2 x O-Ring Fasteners, The quick release bumper fasteners kit has a complete set of supporting parts, Which makes it very convenient for you to install and use in the future.

Rank No. #9

A-Premium Tailgate Rear Trunk Lift Supports Shock Struts Replacement for Volkswagen Jetta 2005-2010 2-PC Set

【Perfect Fitment】Compatible with Volkswagen Jetta 2005-2010---Rear Tailgate
【Reference Number】Replacement for 1K5827550C, 1K5827550B, SG401052, 6430
【About Package】Package includes 2 pieces Lift Supports. Strong package with thick cardbord and air column bag, which provides shock absorption and protection during transportation
【Directly Fit】OE replacement Lift Supports Shock Struts, directly fit. Easy installation, no special tools required. High strength leak-proof piston seal; Superior rod finish resists corrosion; Easy lifting and reduce closing effort
【Buy with Confidence】1 Year Unlimited-mileage Quality Guarantee for all our Gas Spring Prop Struts---We extremely value your satisfaction and strive to provide you good shopping exprience. Any further question, please feel free to reach us at any time

Rank No. #10

Bumper Quick Release Fasteners Kit, JDM Quick Release Holders Front Rear Bumper Fasteners Trunk Band Fenders Clip Kits for Car Bumper Trunk Fender Hatch Lid (Black)

【Convenience】Can be disassembled quickly, easily and frequently, 1. First take out the bumper quick release fasteners and O-ring rubber, then lift the bumper to your desired position. 2. Mark the desired hole locations on the fender. 3. Considering the elasticity of the rubber, the spacing can be slightly shortened, so that the effect of tight symmetry can be achieved.
【Durable】These bumper washers are made with T6 6061 high quality solid billet aluminum long durability.
【Wide range of applications】This Bumper Fasteners Kit fits for all vehicles,especially for Late Model Vehicles, Import & Domestic To Compatible with Honda, Toyota ,Ford, Chevy, Nissan,Volkswagen & Many More.
【perfect choice】Aluminum alloy quick release bumper fasteners ensure its stability in use. As a common structural material in auto parts, its excellent hardness and strength give you more peace of mind, and perfect parts endow a beautiful engine compartment.
【Package includes】4 x Aluminum Fasteners;4 x Nuts;4 x washers;4 x Stainless Bolts;2 x O-Ring Fasteners

Rank No. #11

FEXON Trunk Latch Tailgate Lock compatible with VW Jetta Sportwagen 2010-2014, VW Tiguan 2008-2017 Replaces 5M0827505E

TRUNK LATCH TAILGATE LOCK - TOP quality Trunk Latch Tailgate Lock, made of premium quality for strong stability,which will bulit to long lasting durability, direct replacement for a proper fit,great replacement for your old one,which will enhance your love car performance
COMPATIBLE WITH FOLLOWING VEHICLES - Trunk Latch Tailgate Lock fit for VW Tiguan 2008-2017, VW Jetta Sportwagen 2010-2014, please check the fitment in the product description below
REPLACE PART NUMBERS - 5M0827505E9B9, 5M0 827 505E 9B9, 5M0827505E, 5M0 827 505E Please check the part numbers whether it suits your vehicle before purchasing.
OEM DESIGN & DIRECT FIT - Quality materials & advanced technology used, meets or exceeds OEM standards. Even though this is not a genuine VW liftgate door lock actuator, but it works even better and lasts longer. Save yourself times and money by replacing trunk latch tailgate lock on your VW Tiguan yourself.
BUY WITH CONFIDENCE - all products have been 100% tested before delivery, If you have any problem with ourtrunk latch tailgate lock for VW Jetta, feel free to contact us, we will sort things out together.

SaleRank No. #12

GOOACC 5PCS Auto Trim Removal Tool Kit No-Scratch Pry Tool Kit for Car Door Clip Panel & Audio Dashboard Dismantle -5PCS

SAVE TIME, FRUSTRATION AND MONEY -There are 5 pcs different kinds of trim tools, including 4 pcs car door panel removal tool and 1 fastener remover to facilitate your needs when repairing.
PREMIUM GRADE NYLON -This tool set made of impacted resistant nylon fiber material with high level craftsmanship, tougher than common nylon one, it’ s non-toxic and eco-friendly designed.
ERGONOMIC DESIGN - GOOACC trim removal tool kit is made in accordance with ergonomics design with super lightweight and easy handheld features which effectively effort saving for various interior and exterior car trimming.
MULTI-USE - Works great for car audio/radio system installing or removing, door panel, moldings, emblems, window trims or automotive interior repairing and furniture restoration
100% SATISFACTION GUARANTEED: Please contact our customer service if there's any question

Rank No. #13

Bumper Quick Release, Mellbree Quick Release Trunk Front Rear Bumper Fasteners Fenders Holders Kit Compatible for Universal Car Bumper (Titanium 4 x Quick Release Tabs with 12 x O-Ring Fastener）

Best choice: Aluminum bumper fasteners can help you solve the problem of easily re-fixing the car bumper after it falls off; it supports quick, easy and frequent disassembly of the front bumper and rear bumper; of course, it is also an excellent embodiment of your fashion style. （Full set of stainless steel screws and nuts upgrade model）
Quickly remove：1. Take out the bumper quick release fasteners and O-rubber ring first, and lift the bumper to the position you want. 2. Then mark the desired hole position on the mudguard. 3. Taking into account the elasticity of rubber, the spacing can be slightly shortened to achieve a tightly symmetrical effect. The quick release bumper fasteners kit has a complete set of supporting parts, which makes it very convenient for you to install and use in the future.
Custom rubber: Customized nitrile rubber (NBR) is used to bid farewell to ordinary rubber that breaks when it is used, and melts when exposed to the sun. The O-rings we use have strong wear resistance and excellent heat resistance. Compared with other rubbers, NBR has a wider range of operating temperatures. Because the rubber ring is always a consumable, we have added an additional 10X fixing ring, just to facilitate your daily use.
Aluminum alloy quick release bumper fasteners ensure the stability in use. As a common structural material in auto parts, its excellent hardness and strength make you more at ease in use.
The package contains: 4 x Titanium bumper quick release tabs, 4 x Stainless steel bolts, 4 x Nuts, 4 x Washers, 12 x Customized nitrile rubber (NBR) O-Rings (10 for replacement use)

SaleRank No. #14

X AUTOHAUX Glove Box Lid Repair Fix Kit for VW Golf Jetta Bora New Beetle 1C2857097D

Part Number: 1C2857097D 1C2857097D3SG 1C2857097L3SG
Our glove box lid repair kit fits for 2000-2004 for VW Golf MK4, 2000 2002-2006 for VW Jetta MK3, 2000-2006 for VW Bora 1J2 1J6, 1999-2010 for VW New Beetle 1Y7 9C1 1C1
Our repair kit replaces the rubber grommets with magnets which will restore the function of your glove box lid back to normal.
Convenient to use, and no need to remove or split the glove box lid.
Please make sure that the glove box has rubber bump stops with a screw in the middle on the upper section of the glove box for our kit to work.

Rank No. #15

2Pcs Rear Back liftgate tailgate Hatch trunk Struts Lift Supports Compatible With VOLKSWAGEN JETTA 2011-2018 (Note: Sedan Only, not for Wagon) Shock Gas Spring Prop Rod

Pls check our production description to make sure our lift support fit your vehicle
Replacement Lift Supports For:Trunk Caps, Camper,Marine,Toolbox & Universal Applications
Ext Length:19.252[Inch] Comp Length:12.638[Inch]
NOTICE - We provide THREE YEAR WARRANTY for all our lift supports. Please contact us if you have any question.Designed For Original Equipment Fit And Performance,replaced with these in just a couple of minutes,your vehicle fully opens by itself like it used to do when new
Gently reduces the opening and closing speed as the lift support reaches the end of the cycle, reducing wear on joints and hinges. Manufactured to automotive O.E. performance and quality specifications. Restores the original opening and closing speeds of your hood, hatch or trunk. No special tools required. Exact replacement, engineered for your application. Rust-resistant piston rod extends product life. Easy lifting, reduced closing effort. Consistent lifting force through 30,000 cycles.

Rank No. #16

Garage-Pro Lift Support Compatible with 2011-2017 Volkswagen Jetta Trunk Lid

Direct Replacement Lift Support Compatible with 2011-2017 Volkswagen Jetta
Garage-Pro JCWRV61290001GP Features: Trunk lid, Ball socket Lower Mount Style, Ball socket Upper Mount Style, 19.25 in. Extended Length, Gas Charged
Lift Support Interchangeable With: SG301064, 6275, 5C6827550
Replaces OE Number: 5C6827550
A high quality, Direct Fit OE Replacement Lift Support, with FREE 1-year UNLIMITED mileage coverage on Garage-Pro items

Rank No. #17

4 PCS Bumper Quick Release, Front Rear Bumper Fastener Kit, Aluminum Fasteners Clips Quick Release Fastener Kit Compatible for Front Rear Bumper Trunk Fender Hatch Lids (Gold)

[High quality material]: Bumper Quick Release is made of high quality aluminum metal with good stability, hardness and strength of bumper fasteners; O-ring is made of high quality rubber material with good heat resistance and wear resistance and long service life.
[Quick Release]: 1. Mark the location where you want to install the quick bumper release kit and Drill the holes. 2. Install the aluminum quick release tabs. Place the washer on the other side of the bumper/fender. (Tighten using the hex tool and a wrench) 3. Considering the elasticity of the rubber, the spacing can be slightly shortened to achieve a tight symmetrical effect, even in a crossed fashion.
[Scope of Application]: Quick Release Fastener Kit is suitable for front bumper, rear bumper, trunk lid, hatch cover, etc. Excellent hardness and strength make you feel more at ease in use, and aluminum alloy quick release bumper fasteners ensure stability in use.
[Package includes]: 4 bumper quick release pieces, 4 bolts, 4 nuts, 4 gaskets, 2 rubber O-rings fasteners.
[About us]: We strive to constantly innovate to meet our customers' needs, provide them with better products and create a perfect product experience. Our goal is to serve every detail and bring convenience to every family.

Rank No. #18

BESULEN Car Bumper Hook Lock Clips, 2 Pack Universal Toggle Clamp Quick Release Fasteners, Carbon Fiber Security Hook Lock Clips Accessories for Car Truck Bumper, Fender, Trunk, Hatch Lids (Large)

【Material】: The quick release bumper hook lock clip is made of iron material, high hardness, wear-resistant, durable, not easy to deform or break. The surface is processed by professional water transfer printing technology with cool carbon fiber texture, anti-oxidation, not easy to rust and aging, long service life.
【Function】: With good fixing function, it is used to keep the front and rear bumpers, fenders, panels, trunk, tailgate, hatch closed and connected at high speeds, playing an excellent fastening role and meanwhile reducing the noise generated by loose parts, bringing you a more comfortable and enjoyable journey experience.
【Application】: The large one measures 3.7" x 0.9" and the small one measures 2.2" x 0.6". Suitable for all vehicles, whether it is SUV, sedan, or truck, van can use this product. Also, you can bring it to your home or office to use, it can be used to reinforce DIY boxes, toolboxes, drawers, cabinet doors, closets or luggage, safe and reliable.
【Installation】: Very easy to install, first combine the hook lock kit, fix them first and then install, to keep the exact distance. Clean up the paste position, then tear off the protective film on the back sticker and paste them on the car. Note: In cold weather, you can use a hair dryer to heat the backing, the paste is more stable.
【Decoration】: Exquisite carbon fiber texture appearance can well decorate your car, make your car more cool and fashionable. This is a very practical car exterior accessory with beautiful appearance and wide application, which can bring you more convenience in your daily life, very worth buying.

Rank No. #19

Miytsya Bumper Quick Release, Quick Release Trunk Front Rear Bumper Fasteners Fenders Holders Kit Compatible for Universal Car Bumper Black, 4 x Quick Release Tabs, and 10 x O-Ring Fastener (Blue)

★ Package Include: 4 x Bumper quick release tabs, 4 x Stainless steel bolts, 4 x Nuts, 4 x Washers, 10 x Customized Nitrile Rubber O-rings.
★ High-quality Rubber: Customized nitrile rubber is used to bid farewell to ordinary rubber that breaks when it is used, and melts when exposed to the sun. The O-rings we use have strong wear resistance and excellent heat resistance. Compared with other rubbers, NBR has a wider range of operating temperatures. Because the rubber ring is always a consumable, we have added an additional 10X fixing ring, just to facilitate your daily use.
★ Strong Function: Aluminum bumper fasteners can help you solve the problem of easily re-fixing the car bumper after it falls off. It supports quick, easy and frequent disassembly of the front bumper and rear bumper. Aluminum alloy quick release bumper fasteners ensure the stability in use. As a common structural material in auto parts, its excellent hardness and strength make you more at ease in use.
★ Easy to Install：1. Take out the bumper quick release fasteners and O-rubber ring first, and lift the bumper to the position you want. 2. Then mark the desired hole position on the mudguard. 3. Taking into account the elasticity of rubber, the spacing can be slightly shortened to achieve a tightly symmetrical effect. The quick release bumper fasteners kit has a complete set of supporting parts, which makes it very convenient for you to install and use in the future.
★ After Sale: If you have any question on use, kindly contact us at any time directly, we will solve the problem for you within 24 hours on weekdays.

Rank No. #20

Bumper Quick Release, Trunk Front Rear Bumper Fasteners, Quick Release Tabs with O Rings and Screws, Aluminum Band Fenders Clip Kits, Auto Exterior Accessories Universal for Most Cars (Gray)

【What You Get】: 4 x Bumper quick release tabs, 12 x Rubber rings, 4 x Stainless steel bolts, 4 x Nuts, 4 x Washers. Everything you need is included in the package, which can help you solve the problem of easy re-securing of your car bumper after it comes off. It brings you a lot of convenience to fix the car body and can be quickly removed.
【Top Material】: Our fasteners are made of aircraft-grade aluminum, which is stronger and less prone to deformation and can hold your car firmly in place. Its surface uses anodic oxidation technology to make it look more shiny and will not fade no matter the wind and sun. O-ring has strong wear resistance and heat resistance, you don't have to worry about it breaking at all.
【Easy to Use】: Fixing the car bumper is actually very simple, you just need to mark the holes to be installed, then drill the holes in the body and install the release kit. You can use the o-ring in direct line sleeve way or cross nesting way. It not only prevents components from falling off abnormally, but also has an anti-collision effect.
【Fits Most Cars】: The bumper clip kit is universal and you don't have to worry about it not fitting your car. It can be used for front and rear bumpers, trunk, fenders, hatch covers, hoods, etc. It can even work in other places, and you can DIY it.
【Stylish Look】: Bumper fasteners come in a variety of colors for you to choose from, and you can select the color that blends perfectly with your car's exterior, which is a great reflection of your fashion style. If you have any questions, please feel free to contact us, we will reply as soon as possible.

Last update on 2023-09-22 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Jetta Trunk Fix Kit?

Do you get stressed out thinking about shopping for a great Jetta Trunk Fix Kit? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Jetta Trunk Fix Kit, which is why we have assembled a comprehensive list of the greatest Jetta Trunk Fix Kit available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Jetta Trunk Fix Kit that you consider buying. Your questions might include the following:

Is it worth buying an Jetta Trunk Fix Kit?
What benefits are there with buying an Jetta Trunk Fix Kit?
What factors deserve consideration when shopping for an effective Jetta Trunk Fix Kit?
Why is it crucial to invest in any Jetta Trunk Fix Kit, much less the best one?
Which Jetta Trunk Fix Kit are good in the current market?
Where can you find information like this about Jetta Trunk Fix Kit?

We’re convinced that you likely have far more questions than just these regarding Jetta Trunk Fix Kit, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Jetta Trunk Fix Kit, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Jetta Trunk Fix Kit. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an Jetta Trunk Fix Kit buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Jetta Trunk Fix Kit currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Jetta Trunk Fix Kit has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Jetta Trunk Fix Kit?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Jetta Trunk Fix Kit.
Customer Ratings: Number ratings grade Jetta Trunk Fix Kit objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Jetta Trunk Fix Kit.
Product Quality: You don’t always get what you pay for with an Jetta Trunk Fix Kit, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Jetta Trunk Fix Kit is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining Jetta Trunk Fix Kit information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Jetta Trunk Fix Kit is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

20 Best Jetta Trunk Fix Kit of 2023 – Romance University

How Do You Buy The Best Jetta Trunk Fix Kit?

Related Post: