20 Best Lt3500 35 Amp 110 Voltage Air Plasma Cutter of 2023 – Romance University
After hours researching and comparing all models on the market, Romance University finds out the Best Lt3500 35 Amp 110 Voltage Air Plasma Cutter of 2023. Check our ranking below.
2,825 Reviews Scanned
- ★ PORTABLE but POWERFUL--the LT3500 can easily cut 4/9”(10 mm)metal with ultimate portability weighing only 18lbs; The LT3500 is an excellent choice for home DIY jobs and light duty small business projects.
- ★ QUICK Setup--the per installed NPT 1/4” industry type D plug allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The 110V input design allows the machine can easily connected to your existing 110v wall outlet. The whole machine can be setup quickly within 1 mins.
- ★ INPUT & OUTPUT--110V-125V, 1PH, 50/60Hz @ 35 A input; Automatic dual frequency (50/60Hz); 15-35 A DC output, 2/5” ideal clean cut and 3/5” maximum severance cut
- ★ SUITABLE CUTTING--for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and low cost.
- ★ PACKAGE INCLUDES--power supply, cutting torch, consumables, ground clamp PRE INSTALLED Air Filter Regulator.
![bestarc Plasma Cutter, [Pilot Arc][Large LED Display][Air Sensor]50A bestarc Plasma Cutter Machine 110/220V Dual Voltage, 1/2'' Clean Cut 3/4 Inch Max Cut, Post Flow Mesh, 2T/4T for Beginners DIY](https://m.media-amazon.com/images/I/41SsZSQc71L._SL160_.jpg)
- [Powerful Cutting Ability] Dual voltage 110/220V good for home, workshop and hardware shop use. Professional performance 1/2’’ clean cuts on Iron, Steel aluminum and copper with Inverter IGBT Technology. Very powerful for DIY and heavy duty project. The Maximum cutting thickness is recommended to 12mm@35A 110V 50PSI; 18mm@50A 220V 65PSI. Dry and compressed air is required. Power breaker up to 40A@110V 35A; Up to 30A@220V 50A.
- [Pilot Arc]: bestarc plasma cutter with the pilot arc function. It is a high-frequency non-touch arc starting mode. The torch head does not need to touch the metal plate, making it effective on rusted, painted, or dirty metal surfaces. Adjustable PA function for extended pilot arc duration, reduced energy consumption in non-cutting work, reduced electrode burning, and extended consumables cutting life.
- [Air Sensor Technology]: The air sensor built in machine displays air pressure on front panel of the machine. Users can adjust the air pressure manually through the air regulator (air pressure cannot be automatically adjusted). Air filter is installed in the machine, equipped with a quick-connect 1/4 NPT air connector, ready for use right out of the box. Once connected to an air compressor, the recommended air pressure should be within 65 PSI, with a flow rate of 250 liters per minute. Note: The compressor needs to be purchased separately.
- [LED Screen Display]: The screen centrally displays parameters such as air pressure, voltage, and current, allowing users to understand the equipment status in real-time and adjust operations in a timely manner, improving operational efficiency. If the plasma cutter cannot work, the screen comes with an error code, making it easy to find out the problems.
- [2T/4T/PA/PT Function]: Post time adjustable from 3–15s to cool the torch. Adjust the cooling time of the torch head to extend the service life of consumables. We recommend a cooling time of 4-8 seconds. The PA function allows pilot arc timing adjustment up to 15s; longer times are ideal for mesh cutting, shorter times help extend consumable life. 2T/4T automatic cutting release your finger.2T is a semi-automatic cutting control, and 4T is an automatic cutting control.
- [Specifications]Herocut CUT35i plasma cutter 35Amps, single voltage 110V, 60% duty cycle, 50/60Hz power and advanced IGBT inverter technology, current display 15-35A, Clean cutting thickness 6mm and Max cutting thickness 10mm
- [PT/2T/4T Function]The post-time function, you can adjust the cooling time of the plasma cutting torch within 2-15 seconds to extend the service life of consumables. We recommend a cooling time of 4-8 seconds. The 2T/4T automatic cutting function provides an improved cutting experience. 2T is semi-automatic control, while 4T is fully automatic control
- [Cutting Materials] The plasma cutting equipment easy to cut stainless steel, alloy steel, mild steel, copper,aluminum etc. The CUT35i plasma cutter uses PT31 plasma cutting torch, Max cutting thickness is 2/5''@35Amps 110V 50PSI
- [Portable and easy to assemble] This plasma cutting machine weighs only 14.7lbs, making it easy to carry. The machine is equipped with a 1/4 NPT quick air connector, which users can use after connecting it to the air compressor. Recommend air compressors with a capacity of 100L/MIN or higher (NOTE: Not included the air compressor)
- [Digital Screen Display] Unique large LED screen design for plasma cutting machine, The screen can clearly display current and voltage provides you with accurate data display and makes you read easier and adjust,The regulator and instrument are installed behind the panel, and you can read the air pressure value through the air gauge, We recommend air pressure value be in the range of 20-50 PSI
- POWERFUL CUTTING CAPACITY: 20-50A output, Ideal Clean Cut: 1/4''(6mm) @110V, 1/2"(12mm) @220V, Maximum Cut: 3/8''(10mm)@ 110V, 5/8''(16mm) @ 220V. Uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
- PT/2T/4T FUNCTION: The post time (PT) setting controls the cooling period for the welding head, which extends the lifespan of consumables. 2T, a semi-automatic cutting control for accurate cutting, 4T, an automatic cutting control for long-term continuous cutting.
- BUILT-IN AIR FILTER: Strategically positioned at the rear of the machine, the air filter ensures a swift connection. This thoughtful placement not only slashes installation time but also significantly ramps up overall operational efficiency.
- DIGITAL DISPLAY: The latest digital display centrally shows parameters such as air pressure, voltage, current, etc., allowing users to view the status of the equipment in real time, adjusting the operation in a timely manner, and improving the efficiency of the operation. There will be an error code system on the screen if there is a problem with the machine.
- WIDE APPLICATIONS: Excellently suited for intricate metalwork, pre-weld preparation, automotive repair tasks and DIY art projects. It's an ideal choice for beginners and DIYers.
- Plasma Cutting Thickness: The plasma cutting equipment with advanced IGBT inverter technology, the 50/60 Hz high-frequency pilot arc plasma cutter supports dual voltage inputs of 110V and 220V, and operates at 60% duty cycle. At 110V, the current range is 15-40A. At 220V, The current ranges 15-75A. The recommended maximum cutting thickness is 14mm at 40A and 45 PSI on 110V, And 25mm at 75A and 70 PSI on 220V
- Non Touch Pilot Arc Plasma Cutter: The STC750P plasma cutter with pilot arc function, It’s a high-frequency non-contact arc starting method, This means the torch head doesn't need to make contact with the metal plate. With the addition of a PA (Pilot Arc) adjustable function, the maintenance time of the pilot arc is extended, reducing energy consumption during non-cutting periods and minimizing electrode wear, extend consumables life
- Air Sensor Technology: The air sensor built in machine displays the air pressure on the front panel of the machine. Users can adjust the air pressure manually through the air regulator (air pressure cannot be automatically adjusted). An air filter is installed at the back of the machine, equipped with a quick-connect 1/4 NPT air connector, ready for use right out of the box. Once connected to an air compressor, the recommended air pressure should be within 70 PSI, with a flow rate of 250 liters per minute.(Note: Purchase the air compressor separately)
- PT/2T/4T/PA Function: The post-time function can be adjusted between 3-15 seconds, helping to cool the torch head and extend the life of consumables. A cooling time of 4-8 seconds is generally recommended. The 2T and 4T modes offer automated cutting control, relieving the user's hand. 2T is a semi-automatic cutting control, whereas 4T is fully automatic. The PA setting adjusts the duration of the pilot arc, with longer settings ideal for cutting mesh metal and shorter settings beneficial for extending the life of consumables
- Large Digital Screen Display: The digital display screen shows parameters like air pressure, voltage, and current, enabling users to monitor the equipment's status in real-time and make adjustments as needed, enhancing operational efficiency. In the event of a malfunction, the screen displays an error code, facilitating quick troubleshooting
Last update on 2025-07-12 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API
How Do You Buy The Best Lt3500 35 Amp 110 Voltage Air Plasma Cutter?
Do you get stressed out thinking about shopping for a great Lt3500 35 Amp 110 Voltage Air Plasma Cutter? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Lt3500 35 Amp 110 Voltage Air Plasma Cutter, which is why we have assembled a comprehensive list of the greatest Lt3500 35 Amp 110 Voltage Air Plasma Cutter available in the current market. We’ve also come up with a list of questions that you probably have yourself.
Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Lt3500 35 Amp 110 Voltage Air Plasma Cutter that you consider buying. Your questions might include the following:
- Is it worth buying an Lt3500 35 Amp 110 Voltage Air Plasma Cutter?
- What benefits are there with buying an Lt3500 35 Amp 110 Voltage Air Plasma Cutter?
- What factors deserve consideration when shopping for an effective Lt3500 35 Amp 110 Voltage Air Plasma Cutter?
- Why is it crucial to invest in any Lt3500 35 Amp 110 Voltage Air Plasma Cutter, much less the best one?
- Which Lt3500 35 Amp 110 Voltage Air Plasma Cutter are good in the current market?
- Where can you find information like this about Lt3500 35 Amp 110 Voltage Air Plasma Cutter?
We’re convinced that you likely have far more questions than just these regarding Lt3500 35 Amp 110 Voltage Air Plasma Cutter, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Lt3500 35 Amp 110 Voltage Air Plasma Cutter, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Lt3500 35 Amp 110 Voltage Air Plasma Cutter. Make sure that you are only using trustworthy and credible websites and sources.
Romance University provides an Lt3500 35 Amp 110 Voltage Air Plasma Cutter buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Lt3500 35 Amp 110 Voltage Air Plasma Cutter currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Lt3500 35 Amp 110 Voltage Air Plasma Cutter has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Lt3500 35 Amp 110 Voltage Air Plasma Cutter?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Lt3500 35 Amp 110 Voltage Air Plasma Cutter.
- Customer Ratings: Number ratings grade Lt3500 35 Amp 110 Voltage Air Plasma Cutter objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Lt3500 35 Amp 110 Voltage Air Plasma Cutter.
- Product Quality: You don’t always get what you pay for with an Lt3500 35 Amp 110 Voltage Air Plasma Cutter, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Lt3500 35 Amp 110 Voltage Air Plasma Cutter is should be an indication of how long it will work out for you.
Romance University always remembers that maintaining Lt3500 35 Amp 110 Voltage Air Plasma Cutter information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Lt3500 35 Amp 110 Voltage Air Plasma Cutter is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.