Contents

The Best S10 Flatbed Kit of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best S10 Flatbed Kit of 2023. Check our ranking below.

2,186 Reviews Scanned

Rank No. #1

Rough Country 2.5" Lift Kit for 82-04 Chevy S10/S10 Blazer | GMC Sonoma - 24230

Give your S-10/S-15 the perfect blend of performance, protection, and style from Rough Country.
Unmatched Ground Clearance | Premium N3 Shock Absorbers the Best in Performance for On and Off-Road Use.
Increased ground clearance | Premium N3 Shock Absorbers (4) the best in performance for on and off road use.
Front Differential Brackets maintain Optimum CV Angles.
Backed by Rough Country's Limited Lifetime Replacement Warranty.

SaleRank No. #2

TecNiq, Inc LED Light Kit for Trailers Trucks RVs - Oval Stop/Turn/Tail Lights - Oval Reverse Lights - 2.5" Amber Sidemarkers - 2.5" Red Sidemarkers (Over 80" Width) (Grommet Mounted)

(4) 6" Oval LED Stop Turn Tail Lights, (2) 6" Oval Reverse Lights, (2) 2.5" Round LED Amber Side Markers, (7) 2.5" Round LED Red Lights, All Lights are Grommet Mounted (Includes Grommets and Wiring)
Smooth surface, great looking Stop/Tail/Turn Light, Durable impact resistant lens, Reliable performance over 100,000 hours
Fit all industry standard 6" oval & 2.5" round applications, Can be mounted horizontal, vertical, or at any angle
TecSeal Urethane Potting - Guaranteed Circuit Board Protection, Excellent UV Resistance - Automotive exterior lighting grade polycarbonate
IP68 Rated - Dust and water proof with hermetic seal, Meets all FMVSS 108 requirements for wide and narrow vehicles

Rank No. #3

90 Pack 3/4 Inch LED Side Marker Lights Mini Trailer Button Lights Round Signal Lamp 3 LED Sealed Flush Mount Bulb for Boat Lorry Truck Pickup Bus 12V DC, Amber, Red, White

3/4 Inch LED Lights Kit: you will receive 90 pcs trailer side marker indicator lights, the set includes 30 pcs amber lights, 30 pcs red lights and 30 pcs white lights; Our marker light is rated at 12V DC, suitable for most motor vehicles, such as trailer, truck, bus, van, pickup, boat and so on
2 Wire Design: 3/4 inch LED side marker light contains 2 end wires and rubber grommet, 2 wires connection: black is negative and red is positive; Hole diameter: approx. 2.8 cm/1.1 inches; Wire length: approx. 15 cm/ 6 inches; Sealed IP68 waterproof, there is no problem working above or under water
High Brightness: each round indicator lamp comes with 3 pcs quality LED and 1 energy saving bulb that gives about 60 lumens; The signal tail light can output high luminous efficiency to make your night safety, power saving and low power consumption
Easy Installation: waterproof front rear marker indicators are easy to install with no screws, drill a hole to put the rubber grommet and mount the lights onto the rubber; These 3/4 inch tail light can be installed on the place you'd like to mount them by drilling a 3/4 inch hole in a flat panel
Wide Application: our 12V 3/4 inch LED marker lights can commonly serve as trailer side marker lights, turn signal lights, identification lights, tail lights, auxiliary stop tail turn lights, exterior safety signal lights, etc., widely applied in different trucks, RVs, campers, caravans, trailers, pickups and so on

Rank No. #4

Rough Country 2" Lift Kit for 82-03 Chevy S10 Pickup | 91-03 GMC Sonoma - 225N2

Give your S10, Blazer/Jimmy the perfect blend of performance, protection, and style from Rough Country.
Unmatched Ground Clearance | Premium N3 Shock Absorbers the Best in Performance for On and Off-Road Use.
Levels the front with the rear of the vehicle
Easy at Home Installation and Support Provided by RC. Gives you Excellent Ride Quality.
Backed by Rough Country's Limited Lifetime Replacement Warranty.

Rank No. #5

Detroit Axle - RWD Front 8pc Suspension Kit for 1996-2003 S10, 1996-2005 Chevrolet Blazer, 4 Inner & Outer Tie Rods, 2 Adjustment Sleeves, 1 Center Link, 1 Steering Idler Arm Replacement

Replacement For RWD Models Only
Replacement for 1996-2005 Chevrolet Blazer - [1996-2003 Chevrolet S10] - 1996-2001 GMC Jimmy - [1996-2003 GMC Sonoma] - 1996-2000 Isuzu Hombre
Kit Includes: 1x Idler Arm + 4x Inner and Outer Tie Rods + 2x Adjustment Sleeves + 1x Steering Tie Rod Center Link
Detroit Axle Suspension components are ready to meet the rigorous demands of today's foreign and domestic passenger cars, trucks, and SUVs
10-Year Warranty

Rank No. #6

Waverspeed Triangulated 4 Link Kit for Chevy S10 Pickup 1994-2004 Rear Suspension 28" Steel Bar for Truck Adjustable lengths

[Application] For 1994-2004 Chevy S10 Trucks
[Triangulated 4 Link For Pickups] Locates the rear axle in its proper place and keeps the pinion angle. Effectively controlling axle wrap, allows max suspension travel
[Improve Ride Comfort] Upgrade your suspension links to give better ride quality and handling, perfect for on-road cruising and drag racing
[Tough Steel Made] Powder-coated steel bars with firm bushings are built to last. This triangulated 4-link kit can be weld-on for a more robust application
[Update Size Info] Main Bar: 682-715mm（26.8"-28"）Long. Secondary Bar: 467-500mm （18.4"-19.7"）Long. Axle: 3" 2 3/4". Bar Wall Thickness: 4.1mm

Rank No. #7

SCOSCHE GM1515B Single DIN Car Stereo Dash Kit for 1994-Up Chevrolet, GMC, Isuzu and Oldsmobile

Allows new aftermarket stereo to be installed in factory location
Precision designed for a gapless fit between the dash and the kit
Color and Texture matches the factory dash
High quality automotive grade ABS construction
Easy to install. No special tools are required. Includes step-by-step instructions

Rank No. #8

Supreme Suspensions - Rear Leveling Kit for 1983-2005 Chevrolet S-10 / GMC S-15 2" Rear Steel Lift Shackles Suspension Lift Kit 4x2 4x4 - Can Cooler Included with Purchase

COMPATIBLE WITH 1983 - 2005 Chevrolet S-10 / Blazer S-10, and 1983 - 2005 GMC Jimmy S-15 / Sonoma S-15 (2WD 4WD).
TECHNICAL NOTES: 2 inch rear suspension lift.
BENEFITS: Improves the look of your vehicle and increases ground clearance, so you can fit larger custom rims and tires. Also, this kit will provide increased wheel travel and better articulation than the stock shackles permit, improving ride quality.
INSTALLATION: After an easy 1-2 hour installation process*, you're ready to feature your new and improved ride! No special tools are required. *An alignment is always recommended after altering the height of your vehicle.
LIMITED LIFETIME WARRANTY: All Supreme Suspensions brand products have been thoroughly tested before market release and are backed by or Limited Lifetime Warranty.

Rank No. #9

MMOBIEL Front Glass Repair Kit Compatible with Samsung Galaxy S10-6.1 inch 2019 - Lens Screen Replacement Repair Kit - Incl. Toolkit - Black

Front Glass Display Outer Lens Compatible with Samsung Galaxy S10 SM-G973 2019 Incl. Tool Kit - Black
Comprehensive repair Kit: Professional tool Kit including 1 x microfibre cleaning cloth, 1 x suction cup, 1 x spudger (lever tool), 1 x Pry Tool, 1 x Wipes, 1 x Sim Pin, 4 x Screwdrivers (Phillips #00, Phillips #000, Torx T2 and Pentalobe P2) for easier installation.
Compatible with Samsung Galaxy S10 SM-G973 2019 Important: Please check the Model Number of your device before purchasing this Item. You can find the Model type of your device on your device and / or in the settings.
Installation: We suggest to seek advice from a Professional before replacing the Front Glass Display.
This is an extremely technical procedure, please familiarize yourself with the process first, before you buy this set and before attempting it yourself: We cannot take any responsibility for damage incurred during the replacement process.

Rank No. #10

14pc Complete Front Control Arm Suspension Kit replacement for Chevy Blazer S10 GMC Jimmy Sonoma Isuzu Hombre 2WD

Fits 2WD models only, brand new 14 pcs control arm set without offset shaft, includes:
1 Front Upper Control Arm and Ball Joint - Passenger Side, 1 Front Upper Control Arm and Ball Joint - Driver Side
2 Front Outer Tie Rod End, 2 Front Inner Tie Rod End
2 Tie Rod Adjusting Sleeve, 1 Center Link, 1 Front Idler Arm
2 Front Lower Ball Joint, 2 Front Sway Bar End Link

Rank No. #11

Detroit Axle - Front 14pc Suspension Kit for 2WD Chevy Blazer S10 GMC Jimmy Sonoma Isuzu Hombre, 1 Center Link 4 Tie Rods 4 Ball Joints 2 Sway Bars 2 Adjustment Sleeves 1Idler Arm Replacement

FITS 2-WHEEL DRIVE MODELS ONLY (2WD)
Suspension Kit Replacement for 1996-2005 Chevrolet Blazer (2WD Models Only) - [1996-2003 Chevrolet S10 (2WD Models Only)] - 1996-2001 GMC Jimmy (2WD Models Only) - [1996-2003 GMC Sonoma (2WD Models Only)] - 1996-2000 Isuzu Hombre (2WD Models Only)
Kit Includes: 2x Front Inner Tie Rods + 2x Front Outer Tie Rods + 2x Upper Ball Joints + 2x Lower Ball Joints + 1x Center Link + 2x Front Sway Bar Links + 2x Adjustment Sleeves + 1x Idler Arm
Manufactured in ISO9002 Certified facility
10-YEAR WARRANTY! - Detroit Axle Suspension components are ready to meet the rigorous demands of today’s foreign and domestic passenger cars, trucks, and SUVs - Undergo impact, wear, and fatigue testing to help ensure quality and durability

SaleRank No. #12

BST BSSP Front Upper Control Arms For 1982-2001 Chevy S10 GM S15 4WD w/Ball Joint Heavy Duty Tubular Suspension 2-4" Lift Leveling Kits

Fitment:Replacement for 82-90 GMC S15 4WD;for 83-91 GMC S15 Jimmy 4WD;for 91-04 GMC Sonoma 4WD;for 82-04 Chevry S10 4WD/for 83-94 S10 Blazer 4WD/ for 83-05 Blazer 4WD
FEATURE:PU Bushing（ Better Than Rubber Bushing ;CNC Machined Bushing Housings and Sleeves;Professionally Precision Welded;The upper control arms are stronger than OEM arms and are 100% bolt-on
Items Included:Bolts, Bushing;Placement on Vehicle:Front, Left, Right;Comes W/ Ball-Joint
NOTE:DO NOT use excessive force to prevent copper zerk broken. Alignment is required after installation
Package Contains：2pcs x Heavy Duty Upper Control Arms;Control Arm & Ball Joint Assembly;Please contact us freely if there is any needs or questions about the parts, we will respond you within 12 hours

Rank No. #13

APDTY 12470230 Center Console Armrest Top Lid Reinforcement Repair Kit Replaces 12470230, 12548851, 12470229, 12548832

Brand New Center Console Armrest Lid Reinforcement Repair Kit, This kit includes a new metal reinforcement piece and rivets to repair a broken armrest; This is a fairly simple repair and allows repair without replacing the entire center console box
Match Vehicle To Compatibility Chart To Ensure Exact Fitment
International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions
International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions

Rank No. #14

A/C Kit w/AC Compressor Condenser & Drier For Chevy S10 S-10 Blazer GMC Sonoma Jimmy S15 Olds Isuzu 4.3L V6 1999-2005 - BuyAutoParts 60-82421CK New

Engineered for superior durability, backed by industry-leading 2-year, unlimited-mileage warranty
Guaranteed Exact Fit for easy installation
100% BRAND NEW, premium ISO/TS 16949 quality - no core deposit or return required!
Kit includes compressor with clutch, condenser, drier filter, expansion valve, oil and O-ring seals. Please note: for use only in motor vehicle air conditioner (MVAC) systems. Use in a 20-ounce self-sealing container.
Fits 1999-2005 Chevy S10 & Blazer, GMC Sonoma & Jimmy, Isuzu Hombre and Olds Bravada, all with the 4.3L V6

Rank No. #15

Lift Leveling Kit 1"-3" Torsion Keys and Rear Shackles for Chevy S10 Blazer S15 Jimmy 1982-2004 4WD Pickup

Fitment: for Chevrolet S10 and Blazer 4WD 1982-2004, for GMC S15 Sonoma 4WD 1982-1990, for S15 Jimmy 4WD 1983-1991. *Fit four-wheel-drive models, extended and regular cabs only. Not fit ZR2 or Crew Cab
1-3" Front & 2" Rear: Front lift shackles have two different holes on one side that correspond to different heights, provide an adjustable front lift of 1-3". Rear torsion keys are built stronger than stock keys, lift the rear end for 2" and create a more aggressive look
Increase Ground Clearance: Suspension lift kit allows you to fit bigger tires and rims to improve off-road performance, easier to tackle all terrains. Also increases your car's load-bearing ability while retaining factory ride quality
High-Strength Steel: Torsion bar keys and lift shackles are made of strong steel through a precision casting process. Ensure accurate dimensions and a better surface finish that resist rust and corrosion
Bolt-on Install: This lift kit needs no cutting and no welding, allowing you to retain the use of the stock shocks. Please note that no bolts included, you can reuse the stock hardware. Feel free to contact us if you have any questions

SaleRank No. #16

SCITOO 14pcs 4WD Front Suspension Kit Upper Control Arm Lower Ball Joints Sway Bar Links Inner Outer Tie Rods Adjusting Sleeves Fit 1998-2004 For Chevy S10 1998-2001 For GMC Jimmy

【Suspension Kit Fit】1998-2004 For Chevy S10 (4WD); 1998-2005 For Chevy Blazer (4WD); 1998-2001 For Gmc Jimmy (4WD); 1998-2004 For Gmc Sonoma (4WD); 1998-2000 For Isuzu Hombre (4WD); 1999-2001 For Oldsmobile Bravada (4WD)
【Suspension Kit Include】(1) K620172 Front Upper Control Arm And Ball Joint - Driver Side;(1) K620173 Front Upper Control Arm And Ball Joint - Passenger Side;(1) K6251T Idler Arm;(1) K6255 Pitman Arm;(2) ES2004S Front Tie Rod Adjusting Sleeve;(2) ES3462 Front Outer Tie Rod End;(2) ES3584 Front Inner Tie Rod End;(2) K5335 Front Lower Ball Joint;(2) K6600 Front Sway Bar End Link;
【When To Replace Suspension Kit】 ①Steering Noise Sounds When Turning ②Feeling Every Bump ③Difficulty When Steering
【Suspension Kit Buyer's Guide】 A Complete Suspension Kit Typically Includes Control Arms, Idler Arm, Pitman Arm, Tie Rod Ends,Sway Bar Links And Ball Joints.All Of Our Suspension Parts Have Been Pregreased Before Delivery, Will Require No More Additional Work.
【Note】 Scitoo Auto Provide Suspension Kits For Most Cars,Suvs,Trucks And Trailers.⚠ Please Carefully Select Your Vehicle (Year/Make/Model/Trim )In The Top Left Corner Of The Page To Confirm Compatibility,Or Refer To The Vehicles Information In Description.

SaleRank No. #17

SCITOO 14pcs RWD Front Suspension Kit Idler Arm Inner Outer Tie Rod End Adjusting Sleeve Sway Bar Link Ball Joint Drag Link Fit 1996-2003 For Chevy S10 1996-2001 For GMC Jimmy 1996-2003 Sonoma

【Suspension Kit Fit】 1996 1997 1998 1999 2000 2001 2002 2003 For Chevrolet S10 (RWD);1996-2005 For Chevrolet Blazer (RWD);1996 1997 1998 1999 2000 2001 For GMC Jimmy (RWD);1996 1997 1998 1999 2000 2001 2002 2003 For GMC Sonoma (RWD);
【Suspension Kit Include】(1) DS1047 Center Link Tie Rod- RWD;(1) K6187T Idler Arm;(2) ES2004S Front Tie Rod Adjusting Sleeve;(2) ES3379T Front Outer Tie Rod End - RWD;(2) ES3380T Front Inner Tie Rod End - RWD;(2) K5208 Front Upper Ball Joint;(2) K5254 Front Sway Bar End Link;(2) K6145T Front Lower Ball Joint;
【When To Replace Suspension Kit】 ①Steering Noise Sounds When Turning ②Feeling Every Bump ③Difficulty When Steering
【Suspension Kit Buyer's Guide】 A Complete Suspension Kit Typically Includes Control Arms, Idler Arm, Pitman Arm, Tie Rod Ends,Sway Bar Links And Ball Joints.All Of Our Suspension Parts Have Been Pregreased Before Delivery, Will Require No More Additional Work.
【Note】 Scitoo Auto Provide Suspension Kits For Most Cars,Suvs,Trucks And Trailers.⚠ Please Carefully Select Your Vehicle (Year/Make/Model/Trim )In The Top Left Corner Of The Page To Confirm Compatibility,Or Refer To The Vehicles Information In Description.

Rank No. #18

6 Oval LED Tail Lights, VINAUO 4 Red + 2 White 6 Inch LED Trailer Lights, Grommets & 3-pin Water Tight Plugs Included, Stop Brake Turn Trailer Lights IP67 Truck Lights LED

ENERGY EFFICIENT & Multifunction LED Trailer Lights: Designed with 10 super-bright colored LEDs behind colored diffused polycarbonate lens for true to color, improved visibility. Grommets & 3-pin Water Tight Plugs for you to upgrade your lights in several minutes, for more convenient and stable installation.
The 6 Oval LED Tail Lightss can work as running light, stop light, brake light. Ultra bright but energy-efficient, provides reliable visibility and safety even in inclement weather. Ideal for most 12V vehicles including Trailers, Tractors, Trucks, Semi-Trailer, Dump Truck, Jeep, Pickup, Camper, UTEs, UTVs, Caravans, flatbed, etc, can improve safety give your car a new look.
Oval Trailer Light adopts 10pcs of Super bright LED provide maximum visibility & safety. The light Lens Adopted reflecting mirrow principle making, which can make better lighting, and more durable. With the Snap-on Reflectors Lens make more functional during using.
Waterproof: Waterproof rate IP67. Oval LED Trailer Lights effectively protects the tail light from dust, sand, moisture, rain and other impact of inclement weather. Each lens is sonically welded to the housing and built to ensure maximum durability in working conditions for your vehicles.
Easy Installation: Oval Truck Lights LED Directly mounts on surface of trailer - hardware not included. Grommets & 3-pin Water Tight Plugs Included. Comes with 3 specific colored wires for easy connection. White Wire: Ground (Negative), White + Black Wire: Low Brightness/Running Light, White + Red Wire: High Brightness/Brake Light.

Rank No. #19

Detroit Axle - 4WD Front End Kit for Chevy GMC Jimmy S10 Blazer Sonoma Bravada Upper Control Arms w/Ball Joints Sway Bars Tie Rods Adjusting Sleeves Lower Ball Joints Idler Pitman Arm - 14pc Set

For 4x4 Models Only
Replacement for 1998-2005 Chevrolet Blazer (4WD) - [1998-2004 Chevrolet S10 (4WD)] - 1998-2001 GMC Jimmy (4WD) - [1998-2004 GMC Sonoma (4WD)] - for Oldsmobile Bravada 1999-2001 (4WD) - [1998-2000 Isuzu Hombre (4WD)]
Kit Includes: 2x Upper Control Arms w/Ball Joints + 2x Lower Ball Joints + 2x Front Sway Bar Links +2x Outer Tie Rods + 2x Inner Tie Rods + 2x Adjustment Sleeves + 2x Idler & Pitman Arms
Detroit Axle Suspension Components are Ready to Meet the Rigorous Demands of Today's Foreign and Domestic Passenger Cars, Trucks and SUVs
10-YEAR WARRANTY! - Undergo impact, wear, and fatigue testing to help ensure quality and durability

Rank No. #20

SOSOPART 10pc Set 2WD Front Suspension Kit Idler Arm Inner Outer Tie Rod End Adjusting Sleeve Sway Bar End Link Center Link Tie Rod Replacement for Chevy Blazer S10 for GMC Jimmy Sonoma for Hombre

🛒LIST - This Kit Contain 10pcs Chassis Parts (1 Center Link Tie Rod - RWD + 1 Idler Arm + 2 Front Tie Rod Adjusting Sleeve + 2 Front Outer Tie Rod End - RWD + 2 Front Inner Tie Rod End - RWD + 2 Front Sway Bar End Link)
🛒EASY INSTALL - Suspension part are built to exact oem specifications and quality
🛒DURABILITY - Manufactured with premium materials for longer lasting driving performance
🛒TIPS - Before placing the order please check your car model in the Amazon Fitment System
🛒APPLICATION - 1996-2003 For Chevrolet S10 (RWD); 1996-2005 For Chevrolet Blazer (RWD); 1996-2001 For GMC Jimmy (RWD); 1996-2003 For GMC Sonoma (RWD); 1996-2000 For Isuzu Hombre (RWD)

Last update on 2023-07-30 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best S10 Flatbed Kit?

Do you get stressed out thinking about shopping for a great S10 Flatbed Kit? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching S10 Flatbed Kit, which is why we have assembled a comprehensive list of the greatest S10 Flatbed Kit available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for S10 Flatbed Kit that you consider buying. Your questions might include the following:

Is it worth buying an S10 Flatbed Kit?
What benefits are there with buying an S10 Flatbed Kit?
What factors deserve consideration when shopping for an effective S10 Flatbed Kit?
Why is it crucial to invest in any S10 Flatbed Kit, much less the best one?
Which S10 Flatbed Kit are good in the current market?
Where can you find information like this about S10 Flatbed Kit?

We’re convinced that you likely have far more questions than just these regarding S10 Flatbed Kit, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for S10 Flatbed Kit, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible S10 Flatbed Kit. Make sure that you are only using trustworthy and credible websites and sources.

We provide an S10 Flatbed Kit buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available S10 Flatbed Kit currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of S10 Flatbed Kit has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an S10 Flatbed Kit?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your S10 Flatbed Kit.
Customer Ratings: Number ratings grade S10 Flatbed Kit objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their S10 Flatbed Kit.
Product Quality: You don’t always get what you pay for with an S10 Flatbed Kit, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an S10 Flatbed Kit is should be an indication of how long it will work out for you.

We always remember that maintaining S10 Flatbed Kit information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding S10 Flatbed Kit is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: What can I do with a Chevy S10 body kit?

A: You can make your Mustang look like an in-your-face rally car with huge foglights and a ‘Big Mouth’ style front bumper. Considering that Chevrolet S10 body kits can make your car look completely unique, they are probably the most effective way to customize the look of your ride.

Q: What kind of bodies go in a flatbed truck?

A: Aluminum Truck Flatbeds, Stake Bodies, Dump Bodies, Fire Truck Bodies… Beds, Contractors’ Truck Beds, Aluminum Tr uck Flatbeds don’t rust, carry more cargo, and look great even when dirty. Plus, add fuel and tire mileage because they don’t outweigh your truck..

Q: Where can I get a highway products flatbed?

A: “Shelter Cove” Resort and Marina from Odell Lake in Cresent, Oregon liked their last Highway Products flatbed so much, they bought another one just like it. Repeat business is the best testimonial a company can get. Flatbed with tool boxes and camper. Brush truck with spare tire box on the top and drawers in the side boxes.

Q: What kind of flatbed do you need for a dual wheel truck?

A: Our platform built truck bed for dual wheel trucks, job sites and crews that need a truck bed offered in multiple lengths, and options that meet the requirement for a heavy duty stake bed. Our non-skirted smooth sided flatbed offers integrated pockets and side rails to help keep your cargo secure.