The Best Sg 379 Thermistor of 2023 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best Sg 379 Thermistor of 2023. Check our ranking below.
2,772 Reviews Scanned
Rank No. #1
5PCS Creality 3D Printer NTC Thermistor 100K, NTC 3950 100K ohm Thermistor Temp Sensor for Creality Ender 3/Ender 3 Pro/Ender 3 Neo/Ender 3 Max/Voxelab Aquila, XH2.54-2P Connector (1.3m/51.1inch)
- Wire Length: 51.1inch /1.3m. The package includes 5 3D printer thermistors. 2-pin XH2.54 female connector.
- Note Before Buying: Our Ender 3 thermistor is not fit for Ender 3 V2/Ender 3S/CR-10S Pro V2/CR-10S Pro/Ender 2 Pro/Ender 6/Prusa i3 3D Printer. Please measure the length of your 3D printer's thermistor and confirm whether this thermistor is compatible with yours before buying.
- NTC Thermistor: Used for heated bed or hot end. Our Ender 3 pro thermistor replacement is compatible with most 3D printers.
- Long Life Service: High precision, high sensitivity, and fast temperature conduction, high-temperature resistance.
- After-sales Service: If you have any unsolvable problems while using the Ender 3 thermistor replacement, please feel free to contact us. Our after-sales technical team will provide you with detailed solutions within 24 hours.
SaleRank No. #2
Energizer 379 (SR521SW) Silver Oxide Battery (Pack of 5)
- Country Of Origin: United States
- Model Number: B008J4P1LM
- Item Package Dimensions: 0.51" L x 10.16" W x 17.78" H
- Item Package Weight: 0.8 lb
Rank No. #3
24V 65W Heater Catridge + 300°C NTC 100K 3950 Thermistor Temperature Sensor Compatible with Voron V2.4 V0.1 V1.8 V6 PT100 Dragon Hotend Dragonfly BMS BMO Printhead 3D Printer
- HEATER: max temperature is 500C degree, 450C Degree Working stably ; Power: 24V 65W, cartridge size: OD6mm x15mm, apply high quality and high temperature green color silicone cable, more dorable and longer lifetime , and using 15mm length stainless steel cover does not interfere with the installation of other accessories like leveling sensor, fan.
- THERMISTOR: NTC100K 3950B, cartridge size: OD3mm x15mm, using imported chip, can work at -40°C ~300°C
- Specially designed to be Compatible with Voron V2.4 V0.1 V1.8 V6 PT100 Dragon Hotend 3D Printer
- Widely USE: This heater and thermistor, also can used for other 3D Printers, but please must change the connectors if the connector is not stuibale for your printer
- Package: 1piece green heater tube, 1piece thermistor
Rank No. #4
Prusa Specific Thermistor (MK2, MK3) (PRUSA-THERMISTOR)
- Genuine E3D Parts
- A custom made thermistor encapsulated into an easy to use cartridge package.
SaleRank No. #5
HICTOP Ender 3 Thermistor 1.2m/47.2 Inches NTC 3950 100k Thermistor Temp Sensor for Reprap Creality Ender 3,Ender 3 Pro,Ender 3 Neo,Ender 3 Max,CR-10 10S,Prusa i3, 3D Printer 2Pin XH2.54 (Pack of 5)
- HICTOP 3d printer thermistor 1.2m can be used on both of the heated bed and the extruder for 3d printers
- Ender 3 thermistor is compatible with most 3D printers in the market such as ender3,ender3 pro,ender3 V2,Ender 3 Neo,Ender 3 Max,CR-10S Pro V2,CR-10S Pro,Ender 2 Pro,Ender 6,Prusa i3,CR-10,hictop d3 hero,Voxelab Aquila etc. 3D printers
- There is a 2 pin female connector on the thermistor for 3D printer
- Wire length for the 100K thermistor 3d printer: 1.2m/47.2 inches.
- Recommended parameters for the thermistor: R25℃=100K B25/50=3950K± 1%
Rank No. #6
WINSINN HT-NTC100K Thermistor Sensor, Ender 3 v2 Upgrade 3x15 3950 XH2.54 2Pin, Compatible with Ender 3 5 Pro CR6 CR10 Series 3D Printer Hotend (Pack of 5Pcs)
- ✔️Upgrade HT-NTC100K Thermistor: package temperature measurement. Head diameter: 3mm, Head length: 15mm
- ✔️The temperature measurement: -50 °C ~ +350 °C, can replace the original K-type thermocouple temperature. Fit for printing high-temperature filament.
- ✔️Adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement.
- ✔️HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line connection, the customer can tear the wires depends on their application. The high temperature line is double thicker than others in the market, not easy to break off.
- ✔️Made by WINSINN. Can be used with the New Sensor Heater Block (Temperature measurement can be up to 350 degrees).
Rank No. #7
Genuine E3D Hotend Thermistor Cartridge Replacement
- Direct replacement of cartridge type thermistor in E3D hotends.
- A custom made thermistor encapsulated into an easy to use cartridge package.
- Genuine Semitec 104GT thermistors used.
- Comes with (1) Hotend Thermistor with attached connector and (1) connector cable measuring 40 inches (101cm)
Rank No. #8
Duracell 379 Silver Oxide Button Battery, 1 Count Pack, 379 1.5 Volt Battery, Long-Lasting for Watches, Medical Devices, Calculators, and More
- POWER FOR A WIDE RANGE OF DEVICES – The Duracell 379 Silver Oxide Button battery is designed for use in a variety of compatible devices like watches, medical devices, calculators, and other electronics
- LONG-LASTING POWER – Duracell high power 379 batteries were also developed to provide reliable performance for digital thermometers, laser pointers, stopwatches, and more
- GUARANTEED FOR 4 YEARS IN STORAGE – Duracell 379 Silver Oxide Button batteries are guaranteed for 4 years in storage, so you can be confident these batteries will be ready when you need them
- BUILT FOR RELIABLE PERFORMANCE in a wide range of high-powered devices, the 379 is equivalent to 379, SR63, SR521SW, V379, SR521W, and D379 battery types
- #1 TRUSTED BATTERY BRAND – From storm season to medical needs to the holidays, Duracell is the #1 trusted battery brand
Rank No. #9
2-Pack NTC 100K B3950 Thermistor OD3mm Cartridge Sensor High Temperature 280℃ for Ender 3 V2 Pro CR10 V6 PT100 Heater Block 3D Printer
- A custom made thermistor encapsulated into an easy to use cartridge package.This sensor are able to measure higher temperatures-upto 280degC.
- DIY players can also modify BLOCK by themselves. Make OD3mm hole in BLCOK, then you can use this thermistor, Or source the PT100 version heater block which has 3mm ID hole, If you need V6 PT100 version heater block, please check this ASIN " B08NPKF2GC "; If you need Ender or CR10 PT100 version heat block, please search this ASIN " "
- 1meter cable length, High accuracy:1%; Resistance value at 25°C=100K; B3950, high temperature Custom material wiring insulation. With Brass Material sleeve, Make temperature sensing more sensitive
- Marlin firmware setting: *13:100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " &"Hotend "All In ONE" #define TEMP_SENSOR_0 13 https://github.com/MarlinFirmware/Marlin/blob/1.1.x/Marlin/thermistortable_13.h
- Package: 2pieces 3mm cartridge 3950B thermistor
Rank No. #11
FYSETC 3D Printer Ender 3 V2 Neo Hotend Part HT-NTC100K 3950 Thermistor Cartridge Cable 1M/39.3inch XH2.54 2Pin Compatible with Ender 3 Ender 5 Pro CR6 CR10 A8 Maker Pro Extruder Hotend-Pack of 3
- Upgrade HT-NTC100K 3950 Thermistor: Pack of 3Pcs. Note: Temperature measurement head cylinder diameter is 3mm, length 15mm, The connector is 2pin XH2.54, so make sure your heater block is the right hole, the board Connection terminal is the right type, can be used with the heating block that support the thermocouple.
- The temperature measurement: -20 °C ~ +250 °C for a longer lifecycle, sometimes can reach +300℃(but not recommand to use it long time)can replace the original K-type thermocouple temperature, very fit for printing high-temperature filament.
- Adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement. If need a longer one, please search our 2-meter thermistor (Asin:B09WMRW8HC).
- HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line connection, the customer can tear the wires depends on their application. The high temperature line is double thicker than others in the market, not easy to break off.
- Not fit for CR-6 SE heater block.
SaleRank No. #12
10 379 Energizer Watch Batteries SR521SW Battery Cell
- This is a new set of 10 Energizer #379 (Sr521sw) watch batteries
- There are 5 batteries in a package
- Energizer - trusted power for proven performance and reliability
- Brand new&guaranteed factory fresh. The shelf life on Energizer batteries is 5 to 10 years
- These batteries are commonly required for Swatch, Fossil, Timex and Casio
Rank No. #13
Wholesale Sensors Replacement Whirlpool 2188819 Refrigerator Thermistor 12 Month Warranty
- USA Manufacturer
- 12 Month Warranty
- Replaces Part Numbers: 2188819, 2216113, AP6006067
Rank No. #14
CR6 SE Cartridge Heater 24V 40W + Thermistor HT-NTC100K 300C Degree High Temperature Sensor Compatible with Creality CR-6 Max/CR-5 PRO 3D Printer Accessoriess (Heater)
- This kit includes 1piece heater cartridge and 1piece thermistor temperature sensor
- Heater rod size: φ6X20mm, 24V 40W with terminal XH2.54, cable length with terminal about 90mm
- Thermistor rod size: 3x15mm, NTC100K B3950, upgraded, can reach up to 300C degree for long time working.
- Compatible with Creality CR6 SE/ CR-6 MAX/ CR-5 Pro 3D Printer
- Also can be used for other 3D Printer, but please must pay attention to the length and terminal when using it for other 3D Printers.
Rank No. #15
Upgrade M3 Hex Screw in Fixing Thermistor 100K 3950 Temperature Sensor for Ender 3 V2 Pro CR10 and Other 3D Printer Extruder Hotend (100K 3950)
- M3 screw for installation is Quik and Durable, Flexible and Long Lasting, longer life span
- DIY players can also modify BLOCK by themselves. Make an M3 threaded hole in BLCOK, then you can use this thermistor
- Package: 1piece m3 screw in thermistor
- Thermistor model: NTC 100K 3950. HERE is the firmware setting: *13:100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " &"Hotend "All In ONE" #define TEMP_SENSOR_0 13
- For the printer which uses NTC 100K 3950 thermistor, Then this thermistor is plug and use
Rank No. #16
SIMAX3D 6pcs NTC Thermistor 100K and Heater Cartridge 24V 40W 1Meter 3D Printer Accessories for CR-10S Pro,CR-X,Ender 3, Ender 3X, Ender-3 Pro,Ender 3 V2,Prusa Mendel,Anet E10
- Thermistor Color : white Cartridge Heater Material: copper
- Voltage: 24v, Power: 40w, Diameter: 6mm ; Length: 1m
- NTC3950 Temperature sensor 100KΩ accuracy of ± 1%
- Conviniently pre-wired with 1 meter long high temperature teflon insulated wiring
- Support for NTC 3950 is included in Marlin firmware, use TEMP_SENSOR 11 in firmware configuration
SaleRank No. #17
Energizer 6 379 Button Cell Silver_Oxide Sr521sw Watch Batteries
- High energy density has been achieved owing to the Energizer's original high-precision material-mixing technology. The use of antioxidant, high performance separators also contributes to improved storage characteristics.
- Excellent stable discharge characteristics. Constant voltage output is available during the discharging.
- Excellent leakage resistance. Energizer-unique sealing structure, coupled with special sealing- material treatment, has helped accomplish the excellent leakage resistance.
- Excellent service maintenance; in excess of 90% after storage at 70°F for 5 years
Rank No. #18
1piece 3D Printer 500℃ Thermistor T-D500 M3x15mm Cylindrical High Temperature Sensor 500℃ K500 Thermocouple Sensor Compatible with Volcano V6 Hotend PEI PEEK Nylon Carbon Fiber Printing
- Package: 1piece T-D500 Thermistor cartridge with about 1 meter long cable
- Durable, Flexible and Long Lasting; 450℃ long hours guaranteed
- Compatible with PT100 V6 hotend block, Prusa i3 printer and This Thermocouple sensor is 3mm x 15mm cylindrical package for compatibility with all cartridge-style heater blocks.
SaleRank No. #20
Renata 379 SR521SW Batteries - 1.55V Silver Oxide 379 Watch Battery (2 Count)
- Renata Silver Oxide Battery - Superior Leakage Resistance
- 379 SR521SW | Nominal Voltage - 1.55V | Nominal Capacity - 16 mAh
- High capacity retention on storage (low self-discharge)
- Swiss quality and consistently great performance, battery after battery.
- Works for toys, watches, cameras, calculators, car security alarm, keyless car remotes, organizers, computer equipment (memory backup battery) CMOS
Last update on 2023-07-30 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API
How Do You Buy The Best Sg 379 Thermistor?
Do you get stressed out thinking about shopping for a great Sg 379 Thermistor? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Sg 379 Thermistor, which is why we have assembled a comprehensive list of the greatest Sg 379 Thermistor available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Sg 379 Thermistor that you consider buying. Your questions might include the following:
- Is it worth buying an Sg 379 Thermistor?
- What benefits are there with buying an Sg 379 Thermistor?
- What factors deserve consideration when shopping for an effective Sg 379 Thermistor?
- Why is it crucial to invest in any Sg 379 Thermistor, much less the best one?
- Which Sg 379 Thermistor are good in the current market?
- Where can you find information like this about Sg 379 Thermistor?
We’re convinced that you likely have far more questions than just these regarding Sg 379 Thermistor, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Sg 379 Thermistor, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Sg 379 Thermistor. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Sg 379 Thermistor buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Sg 379 Thermistor currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Sg 379 Thermistor has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Sg 379 Thermistor?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Sg 379 Thermistor.
- Customer Ratings: Number ratings grade Sg 379 Thermistor objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Sg 379 Thermistor.
- Product Quality: You don’t always get what you pay for with an Sg 379 Thermistor, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Sg 379 Thermistor is should be an indication of how long it will work out for you.
We always remember that maintaining Sg 379 Thermistor information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Sg 379 Thermistor is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.