20 Best Ade Rd3 013 of 2021 – Romance University

After hours researching and comparing all models on the market, Romance University finds out the Best Ade Rd3 013 of 2021. Check our ranking below.

2,981 Reviews Scanned

Rank No. #1
Ade RD3-013 Red Dot Reflex Sight for Springfield XDM XD-M OSP Pistol Handgun
  • Does NOT fit the new HELLCAT OSP. Fits directly on Springfield XDM XD-M OSP system with the #1 mount that comes with OSP without needing to remove the rear sight. This optics does NOT fit XDM/XD/XDS, it only fits xdm OSP models which are the springfield's newest Optics Ready Pistols.
  • For Non-OSP XDM/XD/XDS models, this red dot need a red dot mount to replace the rear sight. Search amazon item # B087H5GHCR for the plate. Every time you turn on the dot it stays the same B rightness level last time it was turned off. The lowest setting is invisible by human Eye that is for using with a night vision
  • Promotes rapid target acquisition while providing a precise point of aim; getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery
  • New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a 1632 Battery(Included). Come with a mounting plate for picatinny rail.
  • 4 MOA dot.Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button.
Rank No. #2
Ade Advanced Optics Bertrillium RD3-013 Red Dot Reflex Sight + Optic Mounting Plate for Taurus PT111 G2, Millennium G2, G2C, G3 with Original Rear Sight, PT140 G2, PT709, PT740, TX22 + Pictinny Plate
  • Comes with a ADE RD3-013 red dot, a Picatinny plate and a pistol optic plate to REPLACE the rear sight of G2c, G2s, G2, PT111 G2, Millennium G2, and TX22 Pistols.This plate also fits Taurus G3 with Original Rear sight(see photo)
  • Depending on the Taurus model, filing the corner of the dovetail insert of the plate from 90 degree to 45 degree might be required(see photo demonstration). Some Taurus models have TRAPEZOID shaped rear sight cut that has a 45-degree edge, some have a RECTANGLE shaped rear sight cut that has a 90-degree edge. This optic plate is made with a 90 degrees insert. If the user has a trapezoid rear sight cut, the user needs to file the 90-degree angle down to fit.
  • The pistol plate does NOT fit G3 with NEWER FACTORY STEEL SIGHT, G3C, please search ADE G3C plate on amazon under different listing.
  • 4 MOA. Top load system, no need to remove the sight to change the battery. Red dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was turned off
  • 1.75" length x1.25" width x1.15" height. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Full metal construction with glass lens. No plastic body, no plastic lens.
Rank No. #3
ADE Bertrillium RD3-013 Red Dot+Rear Sight Optic Mounting Plate/Adapter for All GLOCK (Non-MOS,Non-Aftermarket Slide) Standard models,Canik TP9SF and Taurus GX4,G3C&G3 with factory steel sights pistol
  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut.
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith
  • New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a 1632 Battery(Included)Ade Advanced Optics model RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 are designed to fit the slide/footprint of mounting plate made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech MRDS, Sightmark Minishot. Therefore Ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of those brands.
  • Promotes rapid target acquisition while providing a precise point of aim; getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery and re-sight in to waste ammo.
  • 4 MOA dot.Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same B rightness level last time it was turned off. The lowest setting is invisible by human Eye that is for using with a night vision
Rank No. #4
Ade RD3-013-MOS Red Dot Reflex Sight for Glock MOS 17 19 34 35 40 41 Pistol Handgun
  • Fits Glock MOS System such as Gen4 17,19,34,40,41,35 and Gen4 17,19,34
  • This Red dot fits directly on Glock MOS system with the #1 mount that comes with MOS without needing to remove the rear sight.
  • Promotes rapid target acquisition while providing a precise point of aim; getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery
  • New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a 1632 Battery(Included). Come with a mounting plate for picatinny rail.
  • 4 MOA dot.Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button.
Rank No. #5
Ade RD3-013-OSP Red Dot Reflex Sight for Springfield XDM XD-M OSP Pistol Handgun
  • Does NOT fit the new HELLCAT OSP. Fits directly on Springfield XDM XD-M OSP system with the #1 mount that comes with OSP without needing to remove the rear sight. This optics does NOT fit XDM/XD/XDS, it only fits xdm OSP models which are the springfield's newest Optics Ready Pistols.
  • Every time you turn on the dot it stays the same B rightness level last time it was turned off. The lowest setting is invisible by human Eye that is for using with a night vision
  • Promotes rapid target acquisition while providing a precise point of aim; getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery
  • New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a 1632 Battery(Included). Come with a mounting plate for picatinny rail.
  • 4 MOA dot.Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button.
Rank No. #6
Ade Advanced Optics rd3-013 4MOA Red Dot Micro Mini Reflex Sight with 30000 Battery Life for Glock MOS 17 19 34 35 40 41 Pistol Handgun
  • New design for releasing on 2019 ShotShow. New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a 1632 Battery(Included). Come with a mounting plate for picatinny rail. Additional mounting plates(replace rear sight) for hundguns sells separately.
  • Fits directly on Glock MOS Gen4 17,19,34,35,40,41 and MOS Gen5 17,19,34. It is also compatible with Ade handgun mounts for Glock Barreta HK UPS SW MP SIG P226 Springfield Ruger LC9 LC9s LC380 SR9 SR22 SR40 SR45.
  • Red dot DOES NOT auto power off. It stays on til user manually power it off. It has multi brightness levels with one adjustment button. Hold the UP Arrow to power on. Hold the button for 3 seconds to power on/off. Quick press the button to change the brightness.
  • Every time user turns it on the dot stays the same brightness level last time it was powered off. The lowest setting is invisible by human Eye that can only been seen through a night vision device.
  • 4 MOA dot. 1.75" length x1.25" width x1.15" height. Shockproof, Fogproof and waterproof for 30 minutes under 4ft water.Feature 1 M.O.A wind age and elevation adjustments with audible click
Rank No. #7
Ade RD3-013 Red Dot Reflex Sight for Glock MOS 17 19 34 35 40 41 Pistol Handgun
  • Fits Glock MOS System such as Gen4 17,19,34,40,41,35 and Gen4 17,19,34
  • This Red dot fits directly on Glock MOS system with the #1 mount that comes with MOS without needing to remove the rear sight.
  • Promotes rapid target acquisition while providing a precise point of aim; getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery
  • New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a 1632 Battery(Included). Come with a mounting plate for picatinny rail.
  • 4 MOA dot.Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button.
Rank No. #8
Ade Advanced Optics Bertrillium RD3-013 Red Dot Reflex Sight for Ruger SR9,SR9C,SR40C,SR40,SR45 Pistol
  • Comes with mounting plate that replaces the rear sight dovetail of RUGER SR9, SR9C, SR40C, SR40, SR45 and also a standard picatinny mount. Will not fit SR9E or SR22
  • New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a 1632 Battery(Included)
  • Ade Advanced Optics model RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 are designed to fit the slide/footprint of mounting plate made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech MRDS, Sightmark Minishot. Therefore Ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of those brands.
  • Promotes rapid target acquisition while providing a precise point of aim; getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery and re-sight in to waste ammo.
  • 4 MOA dot.Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same B rightness level last time it was turned off. The lowest setting is invisible by human Eye that is for using with a night vision
Rank No. #9
Optics Shim/Riser for ADE RD3-006B, RD3-009, RD3-012, RD3-013, RD3-015, Vortex Venom, Vortex Viper, Eotech MRDS, Insight Red dot Sight
  • Optic Shim is made to fit between the red dot and the mounting plate. Depending on the handgun, some handguns need THIS 1degree shim to give extra range of elevation across a wide range of firearms (such as the 1911). Should you feel any resistance from the mechanism whilst zeroing the elevation please fit the shim between the sight and the mount with the thickest part at the rear.
  • Fits: Burris Fastfire II, III, Docter Red Dot Sight & Insight MRDS
  • Also Fits: Eotech MRDS, Sightmark, Meopta. All trademarks mentioned belong to their respective owner, this optic shim is made by ADE as a mounting accessory for the mentioned optics
  • Also Fits: Ade Advanced Optics RD3-006, RD3-009, RD3-011, RD3-012, RD3-013, RD3-015. The center two screw holes might be 1 or 2mm off for some red dots, if so, simply trim cut the hole bigger. Does NOT fit Trijicon rmr, Shield, Sig Romeo, Holosun red dots
  • What it does? While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turn, the location of the illuminated dot is still too low. Instead of returning the "defective" red dot, this shim will raise the optic to help user to move the illuminated dot higher to the location to zero. Scope base shims Tolerance +/-.005 Taper 1.0 degree.
Rank No. #10
Ade Advanced Optics Bertrillium RD3-013 Red Dot Reflex Sight + Optic Mounting Plate for Ruger Mark I,II,III,IV,IV-Lite,Mark 1,2,3,4 + Picatinny Plate
  • This mounting plate is designed to connect red dot sights to Ruger Mark I, II, III, IV, IV-Lite, 22/45 pistol by attaching to the two holes on top of the slide.For Mark I and II, confirm it has drilled/tapped holes. Plate will not work without holes.
  • Comes with one picatinny mounting plate and one ruger plate. No need to replace the rear sight and allowing user to co-witness the rear sight. Scroll down to Product Description to see the fitment list for Ruger Mark Series.
  • Top load System, no need to Remove the sight to change the Battery. 4 MOA dot. Come with Protected Cover, Adjustment wrench, Adjustment dialing plate, User Manual, Installation screws and Picatinny mounting plate.
  • Waterproof/Shockproof/Fog Resistant. New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a 1632 Coin Battery(Included)
  • New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a 1632 Coin Battery(Included).Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same B rightness level last time it was turned off. The lowest setting is invisible by human Eye that is for using with a night vision
Rank No. #11
Ade Advanced Optics Absolute Cowitness Riser HIGH Mount for ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight
  • Precision CNC Machined from Aircraft Grade Aluminum with Weight Reducing Trapezoid Cuts
  • This is an riser Optic Mount to attach to the red dot sights to lift the red dot higher to absolute Cowitness level.
  • Compatible with ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight
  • Compatible with Doctor, Burris Fastfire, Vortex Venom/Viper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights
  • Finished in a Matte Black Anodize. Comes with installation screws and allen wrench.
SaleRank No. #12
Ade Advanced Optics Picatinny Mounting Plate/Adapter/Mount for ADE ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight
  • Precision CNC Machined from Aircraft Grade Aluminum
  • It is a picatinny mount, to connect to certain type of optic sight to standard 1913 picatinny/weaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top
  • For using on ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight
  • Compatible with Doctor, Burris Fastfire, Vortex Venom/Viper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights
  • Finished in a Matte Black Anodize. Comes with two M3x6mm screws
Rank No. #13
Ade Advanced Optics Bertrillium RD3-013 Red Dot Reflex Sight for Berreta Pistol
  • Comes with mounting plate that replaces the rear sight dovetail of BERRETA and also a standard picatinny mount.
  • New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a 1632 Battery(Included)
  • Ade Advanced Optics model RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 are designed to fit the slide/footprint of mounting plate made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech MRDS, Sightmark Minishot. Therefore Ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of those brands.
  • Promotes rapid target acquisition while providing a precise point of aim; getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery and re-sight in to waste ammo.
  • 4 MOA dot.Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same B rightness level last time it was turned off. The lowest setting is invisible by human Eye that is for using with a night vision
Rank No. #14
Ade Advanced Optics Bertrillium RD3-013 Red Dot Reflex Sight + Optic Mounting Plate for Springfield XD, MOD.2,XDm,XDS,XDE, Hellcat(Non-OSP) Pistol
  • Comes with a Picaitnny mount. Also comes with ADE all new designed adapter mount for Springfield XD, XDE 3.8XD MOD.2, XD3.3"/3.8" Single Stack, XD(M), Hellcat (Non-OSP) Pistol. (It does NOT fit 5.25″ XDM competition series, it does NOT fit any OSP optics ready models)
  • While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
  • Bertrillium RD3-013 Red Dot. New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a 1632 Battery(Included)
  • 4 MOA dot.Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same B rightness level last time it was turned off. The lowest setting is invisible by human Eye that is for using with a night vision
  • Top load System, no need to Remove the sight to change the Battery and re-sight in to waste ammo. Promotes rapid target acquisition while providing a precise point of aim; getting shots down range and on target fast.
Rank No. #15
Ade Advanced Optics RD3-006A Green Dot Micro Mini Reflex Sight for Handgun
  • Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included).It is also compatible with varies handgun mounting plates that replace rear sight dovetail.
  • This Huracan Green Dot Sight fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided mount marked for Doctor/Venom type red dot.
  • However the front switch of the sight needs to trim down 2mm depends on exact pistol model if the pistol's pre-cut is very short..
  • Comes with an removable picatinny mounting base to attach to any thing with piatinny rail. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Powered by a lithium CR2032 battery
  • ADE RD3 006,RD3 009,RD3 012,RD3 013,RD3 015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight.

Last update on 2021-09-16 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Ade Rd3 013?

Do you get stressed out thinking about shopping for a great Ade Rd3 013? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Ade Rd3 013, which is why we have assembled a comprehensive list of the greatest Ade Rd3 013 available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Ade Rd3 013 that you consider buying. Your questions might include the following:

  • Is it worth buying an Ade Rd3 013?
  • What benefits are there with buying an Ade Rd3 013?
  • What factors deserve consideration when shopping for an effective Ade Rd3 013?
  • Why is it crucial to invest in any Ade Rd3 013, much less the best one?
  • Which Ade Rd3 013 are good in the current market?
  • Where can you find information like this about Ade Rd3 013?

We’re convinced that you likely have far more questions than just these regarding Ade Rd3 013, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Ade Rd3 013, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Ade Rd3 013. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an Ade Rd3 013 buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Ade Rd3 013 currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Ade Rd3 013 has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Ade Rd3 013?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Ade Rd3 013.
  5. Customer Ratings: Number ratings grade Ade Rd3 013 objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Ade Rd3 013.
  7. Product Quality: You don’t always get what you pay for with an Ade Rd3 013, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Ade Rd3 013 is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining Ade Rd3 013 information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Ade Rd3 013 is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.