20 Best Anet 3D Board of 2023 – Romance University

After hours researching and comparing all models on the market, Romance University finds out the Best Anet 3D Board of 2023. Check our ranking below.

2,235 Reviews Scanned

Rank No. #1

3D Printer Main Board 12V24V A4988 Motor USB Interface 3D Printer Motherboard Accessory Printers for Anet A8 3D Printer Platforms

3 Way Outputs: PWM DC 3 way outputs, way 1 for high currents, way 3 for medium currents, and way 2 for small currents.
PWM DC 3-way output: The 3D printer main board has 3-way PWM DC output, 1-way high current, 3-way medium current, and 2-way small current.
Perfect match: The 3D printer motherboard can be directly connected to Ramps1.4, 2004LCD control board and 12864LCD control board, which is very practical.
Better Design: Supports 12‑24V input, the main board for self leveling proximity probe enables less heat during work.
Reliable Work: Adopt on board 4 way A4988 16 subdivision stepper driver board motor for good efficiency and stability.

Rank No. #2

DEVMO 2PCS Heat Bed Mosfet,3D Printer Heat Bed Power Module 3D Printer Board Expansion Board 25A MOS Tube High Current Load Module

WELL MADE- New material with superior quality stainless, High-grade Aluminum block for best connectivity and long life.
HIGH TRANSMISSION - With this addon module to your 3D printer motherboard you can lead the maximum current up to 25A.
MULTIFUNCTION - Completely solve the hot bed power is too large and load current problems,and can well protect the connectors on the controller board from overheating.
MEET YOUR NEEDS -Widely used for common 3D printer models,extruder and other open 3D printer motherboards.such as Anet A8, etc.
WARNING - For use on some devices (for example,Anet A8),you need to make sure the power supply is set to 110 volts instead of the default 220 volts.If the voltage is too high, the product will get super hot, even charred!! Don't touch it lightly.

SaleRank No. #3

3D Printer Motherboard, 3 Way Output Main Controller Board USB Interface 3D Printer Pro Accessories for A8 Plus 12‑24V USB Interface, Stable Drive, Good Heat Dissipation

【SPECIFIC MODEL COMPATIBILITY】This high-functioning motherboard designed for optimal compatibility with the A8 PLUS 3D printer. It can directly connect to the Ramps1.4, 2004LCD, and 12864LCD control boards without requiring an L type adapter board. This specificity in compatibility enhances the printer's functioning and ensures a seamless user experience.
【INTEGRATED DESIGN FOR EFFICIENT OPERATION】The motherboard's highly integrated design effectively solves the issue of cumbersome interfaces and proneness to failure seen in Ramps1.4 combinations. Its ability to directly replace the Ramps1.4 makes this motherboard a versatile and efficient choice for 3D printing operations.
【OPTIMIZED DESIGN FOR STABILITY】Featuring an optimized layout and heat dissipation design, the motherboard maintains a stable performance throughout its operations. It supports automatic leveling of proximity probes and lets you calibrate it according to your convenience, thus ensuring an optimal 3D printing process.
【HIGH-PERFORMANCE DRIVER BOARD】The motherboard uses a 4-way A4988 16 subdivision stepper driver board motor for driving operations. The board includes a USB interface for easy connection, while its ability to consistently maintain stable operation adds to the seamless user experience.
【EXCELLENT HEAT DISSIPATION】With a support for 12-24V power input, this motherboard utilizes high-performance, low on-resistance MOS tubes as drivers. This helps ensure excellent heat dissipation during intensive operations, effectively solving the heating problem commonly associated with the hot bed MOS tube. This capability enhances the motherboard's longevity and maintains a steady, high-quality 3D printing process.

Rank No. #4

Mini 3D Printer Controller Board, 3 Way Output 3D Printer Control Board MOS Tube 16 Subdivision Stepper Driver Upgrade Motherboard with USB Port 3D Printer Parts for Anet A8 Plus 3D Printer

【MAIN FUNCTION】The highly integrated motherboard solves the problem that the for Ramps1.4 combination interface is cumbersome and prone to failure, and can directly replace the for Ramps1.4.
【GOOD STABILITY】The optimized layout wiring and heat dissipation design make the performance of the whole board more stable, support the automatic leveling of the proximity probe, and can debug it yourself.
【DRIVER BOARD】The motherboard is driven by the onboard 4 way A4988 16 subdivision stepper driver board motor, and has USB interface, which is convenient for connection and stable in operation.
【GOOD HEAT DISSIPATION】Supports 12-24V power input, and adopts high performance low on resistance MOS tube as the driver, with good heat dissipation and effectively solves the heating problem of the hot bed MOS tube.
【APPLICABLE MODEL】This motherboard is suitable for Anet A8 PLUS 3D printer, and can be directly connected to for Ramps1.4, 2004LCD and 12864LCD control board (without L type adapter board, already integrated).

Rank No. #5

3D Printer Motherboard PWM, for A8 Plus Mainboard PWM Output Printer Motherboard 3 Way Output Mainboard Module for A8 Plus 12‑24V USB Interface

MAIN FUNCTION: The highly integrated motherboard solves the problem that the for Ramps1.4 combination interface is cumbersome and prone to failure, and can directly replace the for Ramps1.4.
GOOD STABILITY: The optimized layout wiring and heat dissipation design make the performance of the whole board more stable, support the automatic leveling of the proximity probe, and can debug it yourself.
APPLICABLE MODEL: This motherboard is suitable for Anet A8 PLUS 3D printer, and can be directly connected to for Ramps1.4, 2004LCD and 12864LCD control board (without L type adapter board, already integrated).
GOOD HEAT DISSIPATION: Supports 12-24V power input, and adopts high performance low on resistance MOS tube as the driver, with good heat dissipation and effectively solves the heating problem of the hot bed MOS tube.
DRIVER BOARD: The motherboard is driven by the onboard 4 way A4988 16 subdivision stepper driver board motor, and has USB interface, which is convenient for connection and stable in operation.

Rank No. #6

12V24V A4988 Motor USB Interface 3D Printer Motherboard Accessory Printers Main Board Module for Anet A8

Perfect Match: Can directly connect to for Ramps1.4, 2004LCD control board and 12864LCD control board, very practical.
Better Design: Supports 12‑24V input, the main board for self leveling proximity probe enables less heat during work.
Reliable Work: Adopt on board 4 way A4988 16 subdivision stepper driver board motor for good efficiency and stability.
Easy to Install: Comes with USB interface, the light weight control board allows for simple and secure connection.
3 Way Outputs: PWM DC 3 way outputs, way 1 for high currents, way 3 for medium currents, and way 2 for small currents.

Rank No. #7

for Anet E12 3D Printer Mainboard Desktop Printer Motherboard Control Board Module 12‑24V 3D Printer Control Board

CONTROL BOARD: The highly integrated control mainboard solves the problem that for Ramps1.4 combination interface is cumbersome and prone to failure.
GOOD COOLING: The optimized layout and heat dissipation design make the performance of the whole board more stable, and the MOS transistor with low on resistance as driver, has good heat dissipation effect.
MOTOR DRIVER: Adopt on board 4 way A4988 16 subdivision stepper driver board motor drive (2 motor interfaces on Z axes), 3 way PWM DC output (1 way for high current, 3 way for medium current, 2 way for small current).
POWER SUPPLY: Adopt ST original power chip, support 12V-24V power input, with USB interface, which has stable operation and more convenient wiring.
EASY CONNECTION: Can be directly connected to for Ramps 1.4, 2004LCD control board and 12864LCD control board (no L shaped adapter board, integrated).

Rank No. #8

MOSFET Board Upgrade 3D Printer Heated Bed Power Module i3 for ANET A8

High power module of general heating bed power expansion module for 3D printer.
Can be used on Chitu motherboards and other open 3D printer motherboards.
Help 3D printers equipped with controller boards (up to 15A) become more powerful.
With this add-on module, the maximum lead current on the board can be up to 25A.
This module is based on power MOSFET and will allow PID control of the heated bed (DC-DC Relays usually do not allow this).

Rank No. #9

2004 LCD Graphic Smart Display Controller Board with Cable, RAMPS 1.4 3D Printer Controller Kit, Fit for Anet A8, A6, A4, E2 3D Printer, Blue Backlight LCD Display Control Board for 3D Printer Part

【EASY TO INSTALL】The LCD display control board is lightweight and compact in size as well, the convenient installation can be quickly completed within minutes. A useful accessory for 3D printers with good performance in all aspects, good value for money.
【CLEAR DISPLAY】Comes with a large size of 3.1in, the LCD display screen with white character and blue backlight enables clear viewing. The double row 5pin cable ensures firm connection and stable transmission, also very easy to use, just plug and play.
【WIDE IN MATCH】The 3D printer LCD display supports for RAMPS 1.4 control board, the LCD display will largely simply the operation and improve working efficiency. Allows for wide application on various 3D printer, including for Anet A8, for A6, for A4, for E2 3D, for A6 L and more.
【SPECIFICATION】Item type: LCD display control board; cable specifications: 3d printer gray line: 50cm / 19.69in(approx.)length, double row 5p, 2561; insulation resistance: 1000mω, dc 500v, min; contact resistance: 15mω, maximum; operating temperature: -40℃ to +105℃.
【CUSTOMER SERVICE PROMISE】If there are any issue, please feel free to contact us. We will reply to your questions within 24 hours and help to fix the issue. We are obligate to make sure that our customers are satisfied with our products and services.

Rank No. #10

Motherboard for A8 12V‑24V Main Board Module A8 3D Printer Motherboard USB Interface 3D Printer Platforms

PWM DC 3-way output: The 3D printer main board has 3-way PWM DC output, 1-way high current, 3-way medium current, and 2-way small current.
Reliable Work: Adopt on board 4 way A4988 16 subdivision stepper driver board motor for good efficiency and stability.
Reduce heat: The 3D printer motherboard supports 12-24V input, and the self-leveling proximity probe motherboard can reduce heat during work.
Perfect Match: Can directly connect to for Ramps1.4, 2004LCD control board and 12864LCD control board, very practical.
USB interface: The 3D printer motherboard comes with a USB interface, the control board is light in weight, and the connection is simple and safe.

Rank No. #11

2004 LCD Display Control Board, 3.1in 3D Printer LCD Display Controller with 5 Pin Cable for Anet A8,A4,A2,A6 L,E2

WITH 5PIN CABLE: The double row 5pin cable ensures firm connection and stable transmission, also very easy to use, just plug and play
LARGE LCD DISPLAY: Comes with a large size of 3.1in, the LCD display screen with white character and blue backlight enables clear viewing
HIGH WORKING EFFICIENCY: Supports for RAMPS 1.4 control board, the LCD display will largely simply the operation and improve working efficiency
APPLICABLE MODELS: LCD display control board allows for wide application on various 3D printer, including for Anet A8, for A6, for A4, for E2 3D, for A6 L and more
EASY INSTLLATION: LCD display control board is light in weight and compact in size as well, the convenient installation can be quickly completed within minutes

Rank No. #12

LCD Display Control Board， 5 Pin,LCD Control Panel 3D Printer LCD Display for Anet A8, for A6, for A4

Easy to Install: Light in weight and compact in size as well, the convenient installation can be quickly completed within minutes.
Smart Control: Supports for RAMPS 1.4 control board, the LCD display will largely simply the operation and improve working efficiency.
Wide in Match: Allows for wide application on various 3D printer, including for Anet A8, for A6, for A4, for E2 3D, for A6 L and more.
With 5pin Cable: The double row 5pin cable ensures firm connection and stable transmission, also very easy to use, just plug and play.
Clear Display: Comes with a large size of 3.1in, the LCD display screen with white character and blue backlight enables clear viewing.

Rank No. #13

3D Upgrade Motherboard,Silent Mainboard for Anet ET4 3D Printer Silent Motherboard Printer Control Mainboard TMC2208 Motor Driver

【EXCELLENT CHIP】Using 32 bit high speed for ARM chip as the main control chip STM32F407, the main frequency is up to 168MHz, and the data processing capability is faster.
【MULTIPLE PROTECTION】Industrial grade chipset, more accurate printing, with overcurrent, overload and over temperature protection, over temperature alarm, etc. (automatically turn off the heating switch).
【OFFLINE UPGRADE】Support offline printing, online printing and offline upgrade functions, copy the upgrade file to the memory card, insert the 3D printer to complete the program upgrade.
【GOOD HEAT DISSIPATION】The chip supports 8-35V power input, the same system power supply can reduce the current of the hot bed to 1/4, effectively solving the problem of MOS tube heating.
【BETTER MOTOR DRIVE】The TMC2208 motor driver chip is built in the mainboard, with low resonance and 256 microstep subdivision, so that the stepper motor can be run without noise, low jitter, and no step loss.

Rank No. #14

HiLetgo 2pcs 3D Printer Accessories 25A MOS Tube Heat Bed Power Module Expansion Board High Current Load Module Mos Tube Hotend Replacement with Cables for 3D Printer

CURRENT OVERLOAD - With this add on module to your 3D printer motherboard you can lead the maximum current up to 30A.
UNIQUE DESIGN: With unique snowflake heatsink design, it has a great cooling effect. The heat bed power module can be used in both Lerdge motherboard and other 3D printer motherboards.
WELL MADE - The best connection is made of new materials and high quality stainless steel and the high grade aluminum blocks, which give longer product life.
APPLICATION: This high power module is a general add-on heated bed power expansion module for 3D printer. It can work with the Anet A8.
SAFETY - New terminal insulation cover to prevent leakage, to avoid electric shock, so use more safer.

Rank No. #15

DC12V - 24V Max 40A MOSFET High Current Load MOS Tube Heating Controller Heated Bed Power Module Hot Bed Power Expansion Board Compatible for Anet CR-10 Ender 3 Prusa 3D Printer

External high current mosfet module is a solution for power a large heatbed without blow up the control board of your 3D printer.
Working voltage:DC 12-24V ;Working current:typical 30A up to 40A with coolingfan; Control pin compatible with both aux pin and bed mosfet output
It can be controlled by any aux pins from control board so you can save a mosfet output to doing other things(need to change the heater pin in the firmware)
Please mind the anode and cathode of the connectors; Please insure the wire of your circuits is big enough for handle such amonut of current; Do not tin the ends of the wire; Preferably,use bootlace ferrules on the end of the wires; Please make sure the screws of the mosfet module terminals are tighten up to minimize the contact resistance otherwise the terminals will melt under lager current.
Each module will doing a load test before delivery; Superior performance of MOSFET(60V/230A R(ds)2.2mΩ); Large heat sink 57A terminals; Can handle up to 40A with cooling fan

Rank No. #16

DEVMO 2pcs 3D Printer Accessories 30A Mos Tube Heat Bed Power Module Expansion Board High Current Load Module Mos Tube Hotend Replacement with Cables for 3D Printer

CURRENT OVERLOAD - With this add on module to your 3D printer motherboard you can lead the maximum current up to 30A.
UNIQUE DESIGN: With unique snowflake heatsink design, it has a great cooling effect. The heat bed power module can be used in both Lerdge motherboard and other 3D printer motherboards.
WELL MADE - The best connection is made of new materials and high quality stainless steel and the high grade aluminum blocks, which give longer product life.
APPLICATION: This high power module is a general add-on heated bed power expansion module for 3D printer. It can work with the Anet A8.
SAFETY - New terminal insulation cover to prevent leakage, to avoid electric shock, so use more safer.

SaleRank No. #17

BIGTREETECH SKR Mini E3 V3.0 Control Board with TMC2209 UART Stepper Driver New Upgrade 32Bit 3D Printer Silent Board for Ender-3, Ender3 Pro, Ender-3 V2 3D Printer

【Main Control Chip】Adopt STMicroelectronics' latest G0 series main control chip STM32G0B1RET6 or STM32G0B0RET6; Add thermistor interface protection circuit to prevent damage to the main control chip.
【Three CNC Fan】Increase the heat dissipation controllable fan to reduce the printer temperature when the device is working; The fan port needs to ensure that the fan voltage specifications are consistent with the motherboard power supply, otherwise the fan will have no voltage.
【Heating Output】Support heating hot end and hot bed output. The heating indicator light will light up when the heating hot end or hot bed is correctly connected and powered on. Please connect the wires in a power-off state, otherwise it may cause static breakdown of the MOSFET and damage to the control board.
【Heat Sink Upgrade】Redesign the drive heat sink, strengthen the drive heat dissipation capacity, and greatly improve the heat dissipation performance; There are 4 tmc2209 silent drivers onboard the motherboard.
【Output Power Supply】Increase SPI output port +3.3V power supply, external SPI sensor power supply voltage +3.3V and +5V are optional, support the motherboard to directly supply power to peripherals.

Rank No. #18

BIGTREETECH SKR Mini E3 V2.0 Control Board 32Bit Silent Motherboard Integrated with TMC2209 UART Stepper Motor Driver for Upgraded Ender 3 Ender 3 Pro 3D Printer Control Board

🌈【Silent Control Board】BTT SKR MINI E3 V2.0 adopts ARM Cortex-M3 series STM32F103RCT6 main control chip with 32-bit CPU 72MHz, integrated with TMC2209 to enhance its stability. It's a super easy drop in replacement for Ender 3 printer.plug and playing.
🌈【Better Thermal Dissipation】The hot-bed MOS tube uses WSK220N04, low on-resistance, which reduces heat generation. Enlarged heat dissipation area protects driving chip and components from problems caused by heat sink.
🌈【Support Various Functions】BTT SKR MINI E3 V2.0 supports various function extensions, such as, BLtouch, filament detection, resumption of shutdown, shutdown after shutdown, etc .
🌈【 4 Layers for Board】Bigtreetech SKR MINI E3 V2.0 increased to 4 layers on the control board's back, so as to improve on heat dissipation signal function and anti-interference.
🌈【Satisfying Customer Services】If you need any information for SKR MINI E3 V2.0, you could contact us on Amazon, and we'll get back to you within 24 hours.

Rank No. #19

BIGTREETECH Octopus V1.1 Control Board 32bit Silent Board Compatible TMC2209, TMC2240, TMC2208, TMC5160 Stepper Driver, Support DIY Klipper and Raspberry-Pi Online Printing for Voron 3D Printer

【Main Control Chip】Uses a 32-bit ARM Cortex-M4 series STM32F446ZET6 main control chip with a core frequency of 180MHz.
【Strong DIY Support】This motherboard supports up to 8 stepper drivers with 9 stepper driver outputs in total; And up to 6 PWM fans and 2 always-on fans with the ability to individually select the voltage rail that will drive each fan. Select from Vin, 12V or 5V.
【Realize Online Printing】Interfaces with a Raspberry Pi using emulated serial over USB or direct UART to any of the serial ports on the board, to realize Klipper Firmware and Raspberry Pi Online Printing.
【Motherboard Expansion Function】Support BLTouch, locked-rotor detection, shutdown after printing, resume printing after power failure, CAN bus, U disk function, IIC expansion; at the same time reserved WIFI interface, PT100 thermistor interface (optional, Only reserved interfaces, customers need to purchase chip welding, please pay attention.), dual Z-axis printer.
【Increase Protection Function】Uses high-performance MOSFETs to increase heating efficiency while also reducing heat generation on the motherboard. Supports “print from SD card” and “print via USB OTG” using the integrated USB-A port.

Rank No. #20

BIGTREETECH SKR V1.4 Control Board 32bit Upgrade SKR V1.3 Motherboard, Compatible TFT35/TFT35 E3/TFT70 Touch Screen Mini12864 LCD Support TMC2209/EZ2209/TMC2208/TMC5160 for Most FDM 3D Printer

⭐Using 32-bit 100MHz ARM-class Cortex-M3 series LPC1768 main control chip, the performance is greatly improved.
⭐Equipped with highly modular open source firmware Marlin 2.0, which is convenient for users to DIY and secondary development.
⭐Support 2.4, 2.8, 3.5-inch color touch screen, support LCD2004 screen, LCD12864 screen; Upgrade configuration firmware through SD card, simple, convenient and efficient operation.
⭐It can supply power to TFT screen, BLtouch, Neo-pixel by plugging in an external DC5V power module; in addition, I2C, SPI, WIFI interface is reserved to facilitate customer DIY.
⭐On-board TMC driver SPI working mode and UART working mode, and the on-board DIAG function pins are convenient for customers to use, eliminating the complicated wiring process, which can be used by simply removing and inserting the jumper cap; Functions such as continuous power on, material detection, shutdown after power off.

Last update on 2023-08-12 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Anet 3D Board?

Do you get stressed out thinking about shopping for a great Anet 3D Board? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Anet 3D Board, which is why we have assembled a comprehensive list of the greatest Anet 3D Board available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Anet 3D Board that you consider buying. Your questions might include the following:

Is it worth buying an Anet 3D Board?
What benefits are there with buying an Anet 3D Board?
What factors deserve consideration when shopping for an effective Anet 3D Board?
Why is it crucial to invest in any Anet 3D Board, much less the best one?
Which Anet 3D Board are good in the current market?
Where can you find information like this about Anet 3D Board?

We’re convinced that you likely have far more questions than just these regarding Anet 3D Board, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Anet 3D Board, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Anet 3D Board. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an Anet 3D Board buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Anet 3D Board currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Anet 3D Board has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Anet 3D Board?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Anet 3D Board.
Customer Ratings: Number ratings grade Anet 3D Board objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Anet 3D Board.
Product Quality: You don’t always get what you pay for with an Anet 3D Board, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Anet 3D Board is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining Anet 3D Board information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Anet 3D Board is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

20 Best Anet 3D Board of 2023 – Romance University

How Do You Buy The Best Anet 3D Board?

Related Post: